PRICE LIST 2016/2017 - · PDF filePRICE LIST 2016/2017 Valid from 01.01 ... Fine U-shaped...
Transcript of PRICE LIST 2016/2017 - · PDF filePRICE LIST 2016/2017 Valid from 01.01 ... Fine U-shaped...
P R IC E L IS T
20 16/20 17
Valid from 01.01.2016
F i n l a n d
PL E A SE NO T E
Customer price list for new guns and accessories. Prices are in Euro including 24 % VAT.
Valid from 01.01.2016
As we continuously work to improve our product line, we ask for your understanding that features and technical in-formation may vary slightly on the final product. Goods remain property of Krieghoff until full payment has been received. We reserve the right to make any changes to price, design, technical aspects, color and/or accessories supplied with any of the products described in this price list.
Purchaser must possess a valid firearm permit. Our general terms and conditions apply to all orders (www.krieghoff.de/agb/agb-en.pdf).
The place of jurisdiction for both parties is Ulm. All information supplied is without guarantee. All rights reserved.
H. Krieghoff GmbHHunting and Sporting ArmsBoschstrasse 22 · 89079 UlmGermanyPhone: +49 (0) 7 31 / 4 01 82-0Fax: +49 (0) 7 31 / 4 01 [email protected]
K R IEGHOFF IMP ORT ER
William WadsteinHelsinki FinlandPohjoisranta 22Tel. (09) 135 4455, 135 1358Fax (09) 135 [email protected]
Aseliike & MetsästysmatkatVapenaffär & JaktresorGunshop & HuntingstripsRelvaäri & JahireisidOхотничий магазин и охотничьи путешествия
Version: 01/2016
1
I. Krieghoff OptimaDrilling, double rifle drilling and “Big Five” double rifle drilling 2
II. Krieghoff UltraOver & under rifle/shotgun combination, over & under double rifle and “Bergstutzen”
8
III. Krieghoff ClassicSide-by-side double rifle and“Big Five” side-by-side double rifle, side-by-side rifle/shotgun combination and side-by-side shotgun
13
IV. Krieghoff HubertusSingle shot rifle 18
V. Krieghoff SemprioIn-Line repeater 22
VI. Krieghoff TrumpfDrilling and double rifle drilling 25
VII. Competition shotgunsK-80 over & under shotgunK-20 over & under shotgunKX-6 single barrel shotgunK-80 Matrix barrel set combinationsK-80 Matrix barrel set weights and optionsK-80, K-20 Stock dimensions
303333383940
VIII. Krieghoff Essencia Side-by-side sidelock shotgun Single shot sidelock rifle“Big Five” side-by-side sidelock double rifle
414243
IX. EngravingsHunting gunsSemprioCompetition shotgunsCustom engravings
44474856
X. VariousService and optionsAppendix
5760
XI. Memo 64
C O N T E N T S
K R IEGHOFF OP T IM A
Optima standard configuration: ▶ Set trigger integrated in the front trigger ▶ Universal Trigger System ▶ Combi-Cocking Device ▶ Steel trigger guard ▶ Front plate for pivot bridge mount 1 ▶ Steel shot proofed depending on choke size and material of the receiver ▶ Quick detachable sling swivels ▶ Steel base plate
Optima 12 and 20 drilling thermo stableAction available in steel or duraluminium; standard barrel length: 55 cm (22“), or 60 cm (24“) optionally; standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“) rubber recoil pad in black. Weight (Optima 12) ca. 3.600 – 4.000 g. Weight (Optima 20) ca. 3.400 – 3.800 g.
Optima 12 and 20 Drilling traditionally solderedAction available in steel or duraluminium; standard barrel length: 60 cm (24“), or 55 cm (22”) optionally; standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“) rubber recoil pad in black. Weight (Optima 12) ca. 3.500 – 3.900 g. Weight (Optima 20) ca. 3.300 – 3.700 g.
Optima 20 drilling with 1-2 special trigger systemFeatures same action as Optima drilling, without the need for a barrel selector. Further information on this exceptional version can be found in the Krieghoff Hunting Gun Catalog. Weight ca. 3.400 – 3.800 g.
Optima 20 double rifle drillingSteel receiver; standard barrel length: 55 cm (22“), or 60 cm (24“) optionally; standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“) rubber recoil pad in black. Weight ca. 4.000 g.
Optima 20 double rifle drilling with 1-2 special trigger systemFeatures same action as Optima double rifle drilling, without the need for a barrel selector. Further information on this exceptional version can be found in the Krieghoff Hunting Gun Catalog.
1 Except for Optima “Big Five”.
▶ Nickel plated receiver finish ▶ Ornamental line engraved around receiver border ▶ Hinge screws, top latch, screws and pins are blued ▶ Standard wood ▶ Right-handed stock with Bavarian-style cheekpiece 1 and “Schnabel” forearm ▶ Supplied in Krieghoff GunPack
7.149,00 €
7.455,00 €
8.469,00 €
8.434,00 €
9.751,00 €
Krieghoff OptimaDrilling shown with additional optionsEngraving: “Large game scene with leaf arabesques”
22
OP
TIM
AO
PT
IMA
Optima 20 “Big Five” double rifle drilling 1
Steel receiver; standard barrel length: 60 cm (24“); traditionally soldered; standard stock length: 38 cm (15“), incl. 15 mm (0,6“) rubber recoil pad in black; steel trigger base plate and heavy stock bolt for weight and balance optimization; open sight featuring wide V-shape middle sight, ball shaped front bead and “Big Five” stock contour.
C A L IB R E S A N D G A U GE S Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category “additional equipment”.
Optima 12 and 20 drilling thermo stable ▶ Rifle calibres: 6,5x57R, 6,5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9,3x74R ▶ Optima 12 duraluminium receiver, standard gauge 12/70 ▶ Optima 12 steel receiver, standard gauge 12/76 ▶ Optima 20, standard gauge 20/76 ▶ Choke: 1/2–3/4
Optima 20 double rifle drilling
▶ Calibre: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS, 9,3x74R ▶ Gauge: 20/76 ▶ Choke: 3/4
Optima 20 „Big Five“ Doppelbüchsdrilling ▶ Calibre: .375 H&H Mag., .450/.400 N.E., .500/.416 N.E. (3 1/4”), .470 N.E. ▶ Gauge: 20/76 ▶ Choke: 3/4
Custom calibres and gaugesFurther calibres and gauges on request.
A DDI T ION A L EQUIPMEN T
Spring loaded extractor claws, per barrelFor rimless cartridges
Automatic set trigger release, per set triggerNot in combination with single trigger or Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
Krieghoff 1-2 trigger (Double trigger, front trigger works as set trigger)
Different barrel length ▶ 60 cm (24") for thermostable model Optima drilling ▶ 55 cm (22") for traditionally soldered Optima drilling
Single combination trigger featuring set trigger device, non selectiveFixed firing sequence: right barrel – left barrel or bottom barrel – top barrel. Because of the fixed firing sequence, this feature is not recommended for models with selec-tive barrels, e. g. drillings with insert barrels. Single triggers are generally available up to calibre .375, but not in combination with the automatic set trigger release.
1 Custom made.
14.541,00 €
ab 1.215,00 €
168,00 €
122,00 €
544,00 €
705,00 €
544,00 €544,00 €
544,00 €
3
OP
TIM
A
Cosmetic sideribs for models thermo stableFor technical and aesthetic reasons, the side rib is best fitted after scope mounting and sighting-in and we strongly recommend that this process is carried out at the factory. Not available for Optima 12 featuring 60 cm (24") barrel length.
Krieghoff see through sightFor Optima 12 and 20 drilling thermo stable and Optima 20 double rifle drilling
2-way flip sight For Optima double rifle drilling. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use.
BreaKO recoil reducerFitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Folding and express sights ▶ Express sights with two folding leaves for Optima “Big Five” double rifle
drilling ▶ Express sights with two folding leaves for Optima “Big Five” double rifle
drilling; Sighting-in distances and vertical gold lines inlaid into both fixed and folding leaves.
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms with two shotgun barrels, the group has to be less than 15 cm.
▶ Models thermo stable: One barrel on Optima 12 and 20 thermo stable Both barrels on Optima 12 and 20 thermo stable
▶ Traditional soldered models: One barrel on drilling and double rifle drilling model Optima Both barrels on Optima drilling
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are pre-pared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
Optima 12 and 20 drilling thermo stable ▶ Pivot bridge mount
Optima 20 – Doppelbüchsdrilling ▶ Pivot bridge mount ▶ Tip-off mount for red dot sight
Optima 20 “Big Five” double rifle drilling ▶ Pivot bridge mount
Fitting a base plate for Optima “Big Five” ▶ For pivot bridge mount
1 Not available in conjunction with screw-in chokes. Please pay attention to the instructions about “scope mounts” on page 64.
342,00 €
301,00 €
97,00 €
215,00 €
642,00 €
1.076,00 €
164,00 €381,00 €
324,00 €648,00 €
815,00 €
1.124,00 €748,00 €
1.452,00 €
no extra charge
4
OP
TIM
A
IN T ERCH A NGE A BL E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included.
▶ Interchangeable drilling barrel, thermo stable 1
▶ Interchangeable drilling barrel, traditionally soldered1 ▶ Interchangeable double rifle drilling barrel, traditionally soldered
(only Optima 20) ▶ Interchangeable double rifle drilling barrel “Big Five”, traditionally soldered
(only Optima 20)
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶ Fitting of chokes, per barrel 2
▶ Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 2
▶ Briley Choke wrench2
▶ “Speed” wrench for quick choke changes (12 and 20 gauge)2 ▶ Briley Special grease for choke2
▶ Krieghoff Container for three chokes2
▶ Briley Container for five chokes2
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
Right-handed stock (hand-crafted) 2
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Left-handed stock (hand-crafted) 2
Left-handed stocks are always hand-crafted, to be able to offer all stock configura-tions also to left-handed shooters.
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
1 The gauge of the interchangeable barrel has to be the same shotgun gauge as the original barrel.2 Position is not discountable.
3.854,00 €4.180,00 €5.220,00 €
11.314,00 €
141,00 €96,00 €36,00 €
120,00 €31,00 €19,00 €21,00 €
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
737,00 €1.072,00 €
737,00 €1.072,00 €
5
OP
TIM
A
Forearm (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil padWith leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plateOrnamental line engraving to match receiver border included. Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”The final shape and finish of the action body and furniture is individually created by the use of hand tools.
Hand-polished stock-finish
Fine checkering instead of standard checkering 2
Skip checkering instead of standard checkering 2
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
Checkering with carved border on grip and forearm 2
Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Ebony or rosewood cap on grip and forearm 2
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶ Blued surface finish ▶ Nitrated surface finish ▶ Complete nickel finish of all external parts ▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering, see page 62 3
1 Position is not discountable.2 Only available in conjunction with custom made stock and forearm.3 Only available in conjunction with custom made stock.
194,00 €447,00 €
322,00 €
1.050,00 €
3.038,00 €
949,00 €
139,00 €
94,00 €
3.515,00 €
3.515,00 €
1.416,00 €
557,00 €
no extra charge483,00 €199,00 €729,00 €
122,00 €407,00 €
6
OP
TIM
A
Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, triggers not included ▶ Trigger gold plated (for guns with only one trigger or single trigger option) ▶ Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in. Drillings featuring light weight receivers, made from Duraluminium can only be equipped with .22 Hornet calibres and only if the lock up of the gun is in good condition. The exception here is our Optima 20 drilling dural which features a specially designed lock up system, which is also suitable for larger calibres such as .222 Rem, 5.6x50R Mag. and 5.6x52R. The Optima drilling 12/76 (3") and 20/76 (3") in steel version accepts all insert barrel calibres up to 9.3x74R.
Gauge 12 ▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6.5x57R,
7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS ▶ .308 Win., .30–06, 9.3x74R
Gauge 20 ▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, ▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS ▶ .308 Win., .30–06, 9.3x74R
EL 22 and EL 44
1 The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
224,00 €324,00 €533,00 €732,00 €
365,00 €833,00 €149,00 €207,00 €
1.550,00 €
1.876,00 €
1.550,00 €1.769,00 €1.876,00 €
price on request
7
OP
TIM
A
8
K R IEGHOFF ULT R A
Ultra standard configuration: ▶ Set trigger integrated in the front trigger ▶ Universal Trigger System ▶ Combi-Cocking Device ▶ Steel trigger guard ▶ Front plate for pivot bridge mount ▶ Steel shot proofed depending on choke size and material of the receiver ▶ Quick detachable sling swivels ▶ Steel base plate
Ultra 20 over & under rifle/shotgun combination thermo stableAction available in steel or duraluminium; standard barrel length: 55 cm (22“), or 60 cm (24“) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 2.700 – 3.400 g.
Ultra 20 over & under rifle/shotgun combination traditionally solderedAction available in steel or duraluminium; standard barrel length: 63,5 cm (25”), or 60 cm (24”) optionally; standard stock length: 37 cm (14,5”) incl. 15 mm (0,6”) rubber recoil pad in black. Weight ca. 2.600 – 3.300 g.
Ultra 20 over & under double rifle thermo stableSteel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 3.200 – 3.900 g.
Ultra 20 “Bergstutzen” thermo stable 1
Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 3.100 – 3.800 g.
C A LIBR ES A ND G AUGES
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category “additional equipment”.
Ultra 20 over & under rifle/shotgun combination (thermo stable and soldered) ▶ Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R ▶ Shotgun gauges: 20/76
1 Available on request.
▶ Nickel plated receiver finish ▶ Ornamental line engraved around receiver border ▶ Hinge screws, top latch, screws and pins are blued ▶ Standard wood ▶ Right-handed stock with Bavarian-style cheekpiece and “Schnabel” forearm ▶ Supplied in Krieghoff GunPack
4.512,00 €
4.818,00 €
5.239,00 €
6.435,00 €
Krieghoff UltraOver & under double rifle shown with additional optionsEngraving: “Large game scene with oak leaves”
ULT
RA
9
Ultra 20 over & under double rifle thermo stable ▶ Same calibres in both barrels. ▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
Ultra 20 “Bergstutzen” thermo stable ▶ Rifle calibre bottom barrel: .22 Ho., .222 Rem., .243 Win., 5.6x50R Mag,
5.6x52R, 6.5x57R, 6.5x65R ▶ Rifle calibre top barrel: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS,
8x75RS, 9.3x74R
Custom calibres and gaugesFurther calibres and gauges on request.
A DDI T ION A L EQUIPMEN T
Spring loaded extractor claws, per barrelFor rimless cartridges
Automatic set trigger release, per set triggerNot in combination with single trigger or Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
Krieghoff 1-2 trigger(Double trigger, front trigger works as set trigger)
Different barrel length ▶ 55 cm (22") for thermostable model Ultra over & under double rifle and
“Bergstutzen” ▶ 60 cm (24") for thermostable model Ultra over & under rifle/shotgun
combination
Single combination trigger featuring set trigger device, non selectiveFixed firing sequence: bottom barrel – top barrel. Because of the fixed firing se-quence, this feature is not recommended for models with selective barrels, e. g. over & under rifles and “Bergstutzen”. Not available in combination with the automatic set trigger release.
Krieghoff see through sightFor Ultra 20 over & under double rifle thermo stable
2-way flip sightFor Ultra over & under rifle/shotgun combination. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use.
Cosmetic sideribs for models thermo stableFor technical and aesthetic reasons, the side rib is best fitted after scope mounting and sighting-in and we strongly recommend that this process is carried out at the factory.
BreaKO recoil reducerFitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms with two shotgun barrels, the group has to be less than 15 cm.
▶ Models thermo stable: One barrel on Ultra 20 over & under rifle/shotgun combination
▶ Traditional soldered models:
1 Please pay attention to the instructions about “scope mounts” on page 64.
ab 1.215,00 €
168,00 €
122,00 €
544,00 €
705,00 €
no extra charge
544,00 €
544,00 €
301,00 €
97,00 €
342,00 €
215,00 €
164,00 €
ULT
RA
10
One barrel on Ultra 20 over & under rifle/shotgun combination
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are pre-pared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
Ultra 20 over & under rifle/shotgun combination thermo stable and over & under rifle/shotgun combination traditionally soldered
▶ Pivot bridge mount
Ultra 20 over & under double rifle thermo stable ▶ Pivot bridge mount ▶ Pivot bridge ring mount for driven hunt scopes 1
▶ Tip-off mount for red dot sight
Ultra 20 “Bergstutzen” thermo stable ▶ Pivot bridge mount
IN T ERCH A NGE A BL E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included.
▶ Interchangeable over & under rifle/shotgun combination barrel, thermo stable ▶ Interchangeable over & under rifle/shotgun combination barrel, traditionally
soldered2
▶ Interchangeable over & under double rifle, thermo stable ▶ Interchangeable “Bergstutzen” barrel, thermo stable
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶ Fitting of chokes, per barrel 3
▶ Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 4
▶ Briley Choke wrench 4
▶ “Speed” wrench for quick choke changes (12 and 20 gauge) 4
▶ Briley Special grease for choke 4
▶ Krieghoff Container for three chokes 4
▶ Briley Container for five chokes 4
1 Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.
This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.2 Available on request.3 Position is not discountable.
324,00 €
815,00 €
962,00 €1.100,00 €
748,00 €
962,00 €
2.156,00 €2.508,00 €
2.987,00 €4.358,00 €
141,00 €96,00 €36,00 €
120,00 €31,00 €19,00 €21,00 €
ULT
RA
11
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
Right-handed stock (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configura-tions also to left-handed shooters.
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Forearm (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil padWith leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plateOrnamental line engraving to match receiver border included.
E XCL USI V E OP T IONS
“Façon Exclusive”The final shape and finish of the action body and furniture is individually created by the use of hand tools.
Hand-polished stock-finish
Fine checkering instead of standard checkering 2
Skip checkering instead of standard checkering 2
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
1 Position is not discountable.2 Only available in conjunction with custom made stock.
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
737,00 €1.072,00 €
737,00 €1.072,00 €
194,00 €447,00 €
322,00 €
1.050,00 €
3.038,00 €
949,00 €
139,00 €
94,00 €
3.515,00 €
3.515,00 €
ULT
RA
12
Checkering with carved border on grip and forearm 2
Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Ebony or rosewood cap on grip and forearm 1
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶ Blued surface finish ▶ Nitrated surface finish ▶ Complete nickel finish of all external parts ▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering1, see page 62
Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, triggers not included ▶ Trigger gold plated (for guns with only one trigger or single trigger option) ▶ Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in, without deinstalling it from the carrier barrel. All adjustment is done at the muzzle of the insert barrel. The listed prices already include fitting, state certified proof and sighting-in. Over & under rifle/shotgun combination featuring light weight receivers, made from Duralu-minium can only be equipped with 5,6x52R Mag calibres and only, if the lock up of the gun is in good condition.
Gauge 20 ▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage ▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS ▶ .308 Win., .30–06, 9.3x74R
EL 22 and EL 44
1 The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
1.416,00 €
557,00 €
no extra charge483,00 €199,00 €729,00 €
122,00 €407,00 €
224,00 €324,00 €533,00 €732,00 €
365,00 €833,00 €149,00 €207,00 €
1.550,00 €1.769,00 €1.876,00 €
price on request
ULT
RA
13
K R IEGHOFF CL A SSIC
Classic standard configuration: ▶ Set trigger integrated in the front trigger 1 ▶ Steel receiver ▶ Universal Trigger System ▶ Combi-Cocking Device ▶ Steel trigger plate and Steel trigger guard ▶ Front plate for pivot bridge mount 1 ▶ Quick detachable sling swivels ▶ Nickel plated receiver finish
Classic double rifleStandard barrel length: 60 cm (24"), or 55 cm (22”) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 3.300 – 3.700 g.
Classic “Big Five” double rifleStandard barrel length: 60 cm (24"); standard stock length: 38 cm (15"); articulated front trigger without set trigger device; special weighted stock-bolt for optimum weight and balance; V-Shaped rear sight with bead front sight; right-handed “Big Five” stock incl. “Old English” rubber recoil pad in black. Weight ca. 4.200 – 4.800 g.
Classic side-by-side shotgunStandard barrel length: 71 cm (28"); standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black; Steel shot proofed depending on choke size. Weight ca. 2.900 – 3.100 g.
Classic side-by-side rifle/shotgun combination 2
Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Steel shot proofed depending on choke size. Weight ca. 2.900 – 3.100 g.
C A LIBR ES A ND G AUGES
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category “additional equipment”.
Classic Double rifle ▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS, 9.3x74R
1 Except for Classic “Big Five”.2 Custom made.
▶ Ornamental line engraved around receiver border ▶ Hinge screws, top latch, screws and pins are blued ▶ Standard wood ▶ Right-handed stock with Bavarian-style cheekpiece 1 and “Schnabel” forearm ▶ Supplied in Krieghoff GunPack
6.603,00 €
9.125,00 €
6.509,00 €
8.654,00 €
Krieghoff ClassicDouble Rifle “Big Five” shown with additional options;custom engraving and Big Five stock
CL
AS
SIC
14
Classic “Big Five” double rifle ▶ Rifle calibres: .375 Flanged Mag. N.E., .375 H&H Mag., .450/.400 N.E.,
.500/.416 N.E. (3 ¼"), .470 N.E., .500 N.E. (3")
Classic side-by-side shotgun ▶ Shotgun gauges: 20/76
Classic side-by-side rifle/shotgun combination ▶ Shotgun gauges: 20/76 ▶ Rifle calibres: on request
Custom calibres and gaugesFurther calibres and gauges on request.
A DDI T ION A L EQUIPMEN T
Intelligent Ejector System (IES) Fitting only possible for new guns, retro-fitting to existing guns is not offered.
Spring loaded extractor claws, per barrelFor rimless cartridges
Automatic set trigger release, per set triggerNot in combination with single trigger or Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
Krieghoff 1-2 trigger(Double trigger, front trigger works as set trigger)
Different barrel length ▶ 55 cm (22") for Classic double rifle (barrel length not available for Classic
“Big Five” double rifle)
Single combination trigger featuring set trigger device, non selectiveFixed firing sequence: right barrel – left barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. side-by-side rifle/shotgun combination. Single triggers are generally available up to calibre .375, but not in combination with the automatic set trigger release.
Krieghoff see through sightFor Classic double rifle and Classic “Big Five” double rifle
Folding and express sights ▶ Express sights with two folding leaves for Classic “Big Five” double rifle ▶ Express sights with two folding leaves for Classic “Big Five” double rifle;
Sighting-in distances and vertical gold lines inlaid into both fixed and folding leaves.
BreaKO recoil reducerFitting included (weight: 350 g/12.3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms with two shotgun barrels, the group has to be less than 15 cm.
▶ Traditional soldered models: One barrel on Classic side-by-side shotgun or rifle/shotgun combination Both barrels on Classic side-by-side shotgun
1 Please pay attention to the instructions about “scope mounts” on page 64.
ab 1.215,00 €
1.623,00 €
168,00 €
122,00 €
544,00 €
705,00 €
544,00 €
544,00 €
301,00 €
642,00 €1.076,00 €
215,00 €
324,00 €648,00 €
CL
AS
SIC
15
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are pre-pared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
Classic Double rifle ▶ Pivot bridge mount ▶ Pivot bridge ring mount for driven hunt scopes 1
▶ Tip-off mount for red dot sight
Classic “Big Five” double rifle ▶ Pivot bridge mount ▶ Pivot bridge ring mount for driven hunt scopes 1
Fitting a base plate for pivot bridge mount ▶ For Classic side-by-side double rifle ▶ For Classic side-by-side shotgun and “Big Five” side-by-side double rifle
IN T ERCH A NGE A BL E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included.
▶ Interchangeable double rifle barrel ▶ Interchangeable “Big Five” double rifle barrel ▶ Interchangeable side-by-side shotgun barrel (gauge 20/76 only) ▶ Interchangeable side-by-side rifle/shotgun combination barrel
(gauge 20/76 only) ▶ Additional charge for interchangeable barrel with ejectors 2
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶ Fitting of chokes, per barrel 3
▶ Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 3
▶ Briley Choke wrench 3
▶ “Speed” wrench for quick choke changes (12 and 20 gauge) 3
▶ Briely Special grease for choke 3
▶ Krieghoff Container for three chokes 3
▶ Briley Container for five chokes 3
1 Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.
2 Only in conjunction with a receiver prepared for ejectors. 3 Position is not discountable.
1.124,00 €1.265,00 €
748,00 €
1.452,00 €1.594,00 €
no extra charge233,00 €
3.812,00 €6.023,00 €3.716,00 €
5.864,00 €
575,00 €
141,00 €96,00 €36,00 €
120,00 €31,00 €19,00 €21,00 €
CL
AS
SIC
16
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
Right-handed stock (hand-crafted) 1 ▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configura-tions also to left-handed shooters.
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Forearm (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil padWith leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plateOrnamental line engraving to match receiver border included. Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”The final shape and finish of the action body and furniture is individually created by the use of hand tools.
“Imperial design”Extended top tang, extended steel trigger guard, steel pistol grip cap, engraved serial number into the trigger guard extension and Rigby-style cheekpiece1.
Hand-polished stock-finish
Fine checkering instead of standard checkering 2
Skip checkering instead of standard checkering 2
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
737,00 €1.072,00 €
737,00 €1.072,00 €
194,00 €447,00 €
322,00 €
1.050,00 €
3.038,00 €
2.307,00 €
949,00 €
139,00 €
94,00 €
1 Position is not discountable2 Only available in conjunction with custom made stock
CL
AS
SIC
17
Full carving on grip and forearm 1
Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm1
Checkering with carved border on grip and forearm 1
Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Ebony or rosewood cap on grip and forearm 1
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶ Blued surface finish ▶ Nitrated surface finish ▶ Complete nickel finish of all external parts ▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering 2, see page 62
▶ Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, triggers not included ▶ Trigger gold plated (for guns with only one trigger or single trigger option) ▶ Double triggers gold plated
3.515,00 €
3.515,00 €
1.416,00 €
557,00 €
no extra charge483,00 €199,00 €729,00 €
122,00 €407,00 €
224,00 €324,00 €533,00 €732,00 €
365,00 €833,00 €149,00 €207,00 €
1 Only available in conjunction with custom made stock and forearm.2 Only available in conjunction with custom made stock.
CL
AS
SIC
18
K R IEGHOFF HUBERT US
Hubertus standard configuration: ▶ Set trigger integrated in the front trigger ▶ Universal Trigger System ▶ Combi-Cocking Device ▶ Steel trigger guard ▶ Front plate for pivot bridge mount ▶ Quick detachable sling swivels ▶ Nickel plated receiver finish ▶ Steel base plate
Hubertus single shot rifleStandard barrel length: 60 cm (24") or 55 cm (22") optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black.
▶ Standard calibre Action available in steel or duraluminium. Weight ca. 2.500 – 3.200 g.
▶ Magnum calibre Action available in steel only. Weight ca. 2.900 – 3.200 g.
Hubertus single shot rifle with octagonal barrelAction available in steel or duraluminium; sling swivel base is milled directly onto the barrel. Weight ca. 2.600 – 3.300 g.
C A LIBR ES A ND G AUGES
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category “additional equipment”.
Hubertus single shot rifle ▶ Standard calibre:
.222 Rem., .22–250 Rem., 5.6x50R Mag., 5.6x52R, .243 Win.1, 6x62R Frères 1, .270 Win., 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1, .30R Blaser 1, 8x57IRS, 8x75RS, 9.3x74R
▶ Magnum calibre: 1 7mm Rem. Mag., 300 Win. Mag.
Hubertus single shot rifle with octagonal barrel ▶ 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1, .30R Blaser 1
Custom calibres and gaugesFurther calibres and gauges on request.
1 For those calibres only steel action available.
▶ Ornamental line engraved around receiver border ▶ Hinge screws, top latch, screws and pins are blued ▶ Standard wood ▶ Right-handed stock with Bavarian-style cheekpiece and “Schnabel” forearm ▶ Supplied in Krieghoff GunPack
4.228,00 €
5.702,00 €
5.239,00 €
ab 1.215,00 €
Krieghoff HubertusSingle shot rifle shown with additional optionsEngraving: “Fine English with roses & bouquet”
HU
BE
RT
US
19
A DDI T ION A L EQUIPMEN T
Spring loaded extractor claws, per barrelFor rimless cartridges
Automatic set trigger release
Different barrel length ▶ 55 cm (22") for Krieghoff Hubertus single shot rifle
Krieghoff see through sight
BreaKO recoil reducerFitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
▶ Pivot bridge mount
IN T ERCH A NGE A BL E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included.
▶ Interchangeable barrel in standard calibre ▶ Interchangeable barrel in magnum calibre (steel action only) ▶ Interchangeable octagonal barrel in standard calibre ▶ Interchangeable shotgun barrel gauge 28/76
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
168,00 €
122,00 €
no extra charge
301,00 €
215,00 €
768,00 €
1.972,00 €3.446,00 €2.987,00 €1.972,00 €
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
HU
BE
RT
US
20
Right-handed stock (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configura-tions also to left-handed shooters.
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Forearm (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil padWith leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plateOrnamental line engraving to match receiver border included. Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”The final shape and finish of the action body and furniture is individually created by the use of hand tools.
Hand-polished stock-finish
Fine checkering instead of standard checkering 2
Skip checkering instead of standard checkering 2
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
Checkering with carved border on grip and forearm 2
Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Ebony or rosewood cap on grip and forearm 2
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶ Blued surface finish ▶ Nitrated surface finish ▶ Complete nickel finish of all external parts ▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
1 Position is not discountable.2 Only available in conjunction with custom made stock.
737,00 €1.072,00 €
737,00 €1.072,00 €
194,00 €447,00 €
322,00 €
1.050,00 €
3.038,00 €
949,00 €
139,00 €
94,00 €
3.515,00 €
3.515,00 €
1.416,00 €
557,00 €
no extra charge483,00 €199,00 €729,00 €
HU
BE
RT
US
21
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering1, see page 62
Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, triggers not included ▶ Trigger gold plated
1 Only available in conjunction with custom made stock.
122,00 €407,00 €
224,00 €324,00 €533,00 €732,00 €
365,00 €833,00 €149,00 €
HU
BE
RT
US
22
K R IEGHOFF SEMPR IO
Semprio standard configuration: ▶ Krieghoff In-Line action ▶ Set trigger integrated ▶ Universal Trigger System ▶ Combi-Cocking Device ▶ “Click-and-Go” sling swivels ▶ Take down (No tools required)
Semprio In-Line repeater in standard calibresStandard barrel length: 55 cm (22"); magazine capacity: 4+1; standard stock length 37 cm (14,5"), incl. 15 mm (0,6") black rubber recoil pad in black; right-handed stock with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads. Weight ca. 3.400 g.
Semprio In-Line repeater in magnum calibresStandard barrel length: 63 cm (25"); magazine capacity: 3+1; standard stock length 37 cm (14,5") incl. 15 mm (0,6") black rubber recoil pad in black; right-handed stock with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads. Weight ca. 3.400 g.
C A LIBR ES A ND G AUGES
Semprio In-Line repeater in standard calibres ▶ Rifle calibres: .223 Rem., .243 Win., 6.5x55 SE, .270 Win., 7x64, .308 Win.,
.30–06, 8x57IS, 9.3x62
Semprio In-Line repeater in magnum calibres ▶ Rifle calibres: 7 mm Rem. Mag., .300 Win. Mag., .375 Ruger 1
Custom calibres and gaugesFurther calibres and gauges on request.
1 Only available in standard barrel length 55 cm (22").
▶ Prepared for Tip-off mount (Krieghoff Pro Mount) ▶ Black anodized action finish ▶ Standard wood in oil finish ▶ Supplied in Semprio GunPack
3.279,00 €
3.541,00 €
ab 1.215,00 €
Krieghoff SemprioIn-Line repeaterModels: black anodized finishCamouflage stock finish “Blaze Orange” (Fig. Top)Thumb hole stock with Camouflage stock finish “Forest Green” (Fig. Bottom)
SE
MP
RIO
23
A DDI T ION A L EQUIPMEN T
Semprio In-Line Repeater ▶ Nickel plated action frame ▶ “Compact” version with additional sling swivels on the side of forend and
buttstock ▶ BreaKO recoil reducer ▶ Barrel porting (recoil and muzzle jump is reduced up to 35 %)
▶ Muzzle threading, depends on calibre (M14x1 or M15x1)
▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver) ▶ Fluted barrel – improves the temperature management of the barrel,
incl. “PH-ProCoating”
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
Fitting and sighting-in is already included.
Krieghoff Semprio ProMount ▶ Tip-off mounts for scopes with rail ▶ Tip-off mounts for scopes without rail (ring mount) ▶ Tip-off mounts for red dot sight
IN T ERCH A NGE A BL E B A R R EL S & ACCESSOR IES
Interchangeable barrels As a complete assembly, including wood forearm, magazine frame, but without magazine and bolt head.
▶ Interchangeable barrel for standard calibre ▶ Interchangeable barrel for magnum calibre
Extra magazines 1
▶ Calibre group 1: .270 Win., .30–06, 7x64, 8x57JS, 6.5x55 SE ▶ Calibre group 2: .308 Win., .243 Win. ▶ Calibre group 3: 9.3x62 ▶ Calibre group 4: .300 Win. Mag., 7mm Rem. Mag., .375 Ruger, ▶ Calibre group 5: .223 Rem.
Bolt heads 1
▶ Standard calibre, for calibre groups 1, 2 and 3 ▶ Magnum calibre, for calibre group 4 ▶ Small calibre, for calibre group 5
1 Position is not discountable.
no extra charge488,00 €
215,00 €395,00 €288,00 €318,00 €995,00 €
664,00 €711,00 €
748,00 €
1.434,00 €1.695,00 €
89,00 €89,00 €89,00 €89,00 €89,00 €
203,00 €203,00 €203,00 €
SE
MP
RIO
24
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
StockOil finish; straight comb; stock length 37 cm (14,5") which already includes the standard 15 mm (0,6") black rubber recoil pad. Standard wood grade or T-Wood optionally, alternative camouflage finish in “Blaze Orange” or “Forest Green”.
▶ Stock without cheekpiece ▶ Right-handed stock with Semprio cheekpiece ▶ Left-handed stock with Semprio cheekpiece
Thumb hole stock Oil finish; straight comb; stock length 37 cm (14,5") which already includes the standard 15 mm (0,6") black rubber recoil pad; wood category 001 1; alternative camouflage finish in “Blaze Orange” or “Forest Green”.
▶ Thumb hole stock with Semprio cheekpiece, right-handed ▶ Thumb hole stock with Semprio cheekpiece, left-handed
Handmade stocks 1
▶ Stock hand-crafted ▶ Forearm hand-crafted
Alternative stock finish ▶ T-Wood (walnut wood optically improved) 2
▶ Camouflage finish in “Blaze Orange” or “Forest Green”
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks 5
Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering 3, see page 62
Interchangeable StocksSee description above
▶ Right-handed stock with Semprio cheekpiece ▶ Left-handed stock with Semprio cheekpiece ▶ Right-handed thumb hole stock with Semprio cheekpiece ▶ Left-handed thumb hole stock with Semprio cheekpiece
1 Only wood category 001 available – other categories on request.2 Not available for hand-crafted stock.3 Only available in conjunction with custom made stock.
no extra chargeno extra charge
237,00 €
471,00 €708,00 €
1.072,00 €447,00 €
no extra chargeno extra charge
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
122,00 €407,00 €
642,00 €885,00 €
1.113,00 €1.349,00 €
SE
MP
RIO
25
K R IEGHOFF T RUMPF
Trumpf standard configuration: ▶ Classic three lock drilling ▶ Separate manual cocking device for rifle barrel ▶ Set trigger integrated in the front trigger ▶ Universal Trigger System ▶ Steel trigger guard ▶ Front plate for pivot bridge mount ▶ Steel shot proofed depending on choke size and material of the receiver ▶ Steel base plate ▶ Quick detachable sling swivels
Trumpf 12 and 20 drilling thermo stableAction available in steel or duraluminium; standard barrel length: 55 cm (22"), or 60 cm (24“) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 3.400 – 3.800 g.
Trumpf 12 and 20 drilling traditionally solderedAction available in steel or duraluminium; standard barrel length: 60 cm (24”), or 55 cm (22“) optionally; standard stock length: 37 cm (14,5”) incl. 15 mm (0,6”) rubber recoil pad in black. Weight (Trumpf 12) ca. 3.500 – 3.900 g. Weight (Trumpf 20) ca. 3.300 – 3.700 g.
Trumpf 20 double rifle drillingSteel receiver; standard barrel length: 55 cm (22"), or 60 cm (24“) optionally; stan-dard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 4.000 g.
C A LIBR ES A ND G AUGES
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category “additional equipment”.
Trumpf 12 and 20 drilling thermo stable and drilling traditionally soldered ▶ Rifle calibres: 6,5x57R, 6,5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9,3x74R ▶ Trumpf 12 duraluminium receiver, standard gauge 12/70 ▶ Trumpf 12 steel receiver, standard gauge 12/76 ▶ Trumpf 20, standard gauge 20/76 ▶ Choke: 1/2–3/4
Trumpf 20 double rifle drilling ▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R ▶ Shotgun gauge: 20/76 ▶ Choke: 3/4
▶ Nickel plated receiver finish ▶ Ornamental line engraved around receiver border ▶ Hinge screws, top latch, screws and pins are blued ▶ Standard wood ▶ Right-handed stock with Bavarian-style cheekpiece and “Schnabel” forearm ▶ Supplied in Krieghoff GunPack
8.171,00 €
8.477,00 €
9.456,00 €
Krieghoff TrumpfDouble rifle drilling shown with additional options and Ornamental line engraving borders receiver
TR
UM
PF
26
Custom calibres and gaugesFurther calibres and gauges on request.
A DDI T ION A L EQUIPMEN T
Spring loaded extractor claws, per barrelFor rimless cartridges
Second set trigger installed in the rear trigger
Different barrel length ▶ 60 cm (24") for thermo stable model Trumpf drilling ▶ 55 cm (22") for traditionally soldered model Trumpf drilling
Cosmetic sideribs for models thermo stableThe cosmetic siderib (available in different heights) is generally fitted after the rifle is sighted-in. For technical and aesthetic reasons, we strongly recommend that the scope mounting and sighting-in process is carried out at the factory. Not available for Trumpf 12 featuring 60 cm (24") barrel length.
Krieghoff see through sightFor Trumpf double rifle drilling
2-way flip sight For Trumpf drilling. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use.
BreaKO recoil reducerFitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms with two shotgun barrels, the group has to be less than 15 cm.
▶ Models thermo stable: One barrel on Trumpf 12 and 20 thermo stable Both barrels on Trumpf 12 and 20 thermo stable
▶ Traditional soldered models: One barrel on Trumpf drilling, double rifle drilling Both barrels on Trumpf drilling
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SCOPE MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are pre-pared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
Trumpf 12 and 20 drilling thermo stable ▶ Pivot bridge mount
Trumpf 20 double rifle drilling ▶ Pivot bridge mount ▶ Tip-off mount for red dot sight
1 Please pay attention to the instructions about “scope mounts” on page 64.
ab 1.215,00 €
168,00 €
544,00 €
544,00 €544,00 €
342,00 €
301,00 €
97,00 €
215,00 €
164,00 €381,00 €
324,00 €648,00 €
815,00 €
1.124,00 €748,00 €
TR
UM
PF
27
IN T ERCH A NGE A BL E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included.
▶ Interchangeable drilling barrel, thermo stable 1
▶ Interchangeable drilling barrel, traditionally soldered ▶ Interchangeable double rifle barrel, traditionally soldered
(only Trumpf 20)
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶ Fitting of chokes, per barrel 2
▶ Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 2
▶ Choke wrench ▶ “Speed” wrench for quick choke changes (12 and 20 gauge) ▶ Briley Special grease for choke ▶ Krieghoff Container for three chokes ▶ Briley Container for five chokes
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
Right-handed stock (hand-crafted) 2
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Left-handed stock (hand-crafted) 2
Left-handed stocks are always hand-crafted, to be able to offer all stock configura-tions also to left-handed shooters.
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
1 The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel.2 Position is not discountable.
3.854,00 €4.180,00 €5.220,00 €
141,00 €96,00 €36,00 €
120,00 €31,00 €19,00 €21,00 €
339,00 €812,00 €
1.189,00 €1.599,00 €
2.916,00 €3.789,00 €4.625,00 €
737,00 €1.072,00 €
737,00 €1.072,00 €
TR
UM
PF
28
Forearm (hand-crafted) 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil padWith leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plateOrnamental line to match receiver border included. Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”The final shape and finish of the action body and furniture is individually created by the use of hand tools.
Hand-polished stock-finish
Fine checkering instead of standard checkering 2
Skip checkering instead of standard checkering 2
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
Checkering with carved border on grip and forearm 2
Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves.
Ebony or rosewood cap on grip and forearm 2
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶ Blued surface finish ▶ Nitrated surface finish ▶ Complete nickel finish of all external parts ▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver ▶ Inlet into pistol grip cap ▶ Steel pistol grip cap fully covering 2, see page 62
1 Position is not discountable.2 Only available in conjunction with custom made stock.
194,00 €447,00 €
322,00 €
1.050,00 €
3.038,00 €
949,00 €
139,00 €
94,00 €
3.515,00 €
3.515,00 €
1.416,00 €
557,00 €
no extra charge483,00 €199,00 €729,00 €
122,00 €407,00 €
TR
UM
PF
29
Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, triggers not included ▶ Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in. Drillings featuring light weight receivers, made from Duraluminium can only be equipped with .22 Hornet calibres and only if the lock up of the gun is in good condition.
Gauge 12 ▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6.5x57R, 7x57R, 7x65R,
.30R Blaser, 8x57IRS, 8x75RS ▶ .308 Win., .30–06, 9.3x74R
Gauge 20 ▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage ▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS ▶ .308 Win., .30–06, 9.3x74R
EL 22 and EL 44
1 The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
224,00 €324,00 €533,00 €732,00 €
365,00 €833,00 €207,00 €
1.550,00 €
1.876,00 €
1.550,00 €1.769,00 €1.876,00 €
price on request
TR
UM
PF
30
K R IEGHOFF K-80, K-20 A ND K X- 6
K R IEGHOFF K-80 W I T H FIX ED CHOK ES
K-80 standard configuration with fixed chokes: ▶ Nickel plated steel action ▶ Hinge screws, top latch, screws and pins are blued ▶ Selectable, mechanical single trigger ▶ Length adjustable trigger blade
You can find the available gauges of the different K-80 variations in the K-80 Matrix on page 38.
Please find optional Briley screw-in chokes can be found under category “Service” on page 55.
K-80 Sporting – Trap – SkeetBarrel length: 76 cm (30") or 81 cm (32"); free-floated barrel set; various stocks for Sporting/International Skeet or Trap, featuring Monte Carlo or straight style; forearm styles can be individually selected. K-80 Sporting/Skeet, Weight ca. 3.950 g1. Trap, Weight ca. 4.070 g1.
K-80 ParcoursBarrel length: 71 2 (28"), 76 (30") or 81 cm (32"); full length soldered barrel set; “Parcours” stock, right-handed; fixed comb; “Parcours” forearm.Optionally available with non-adjustable comb and oil finish. Weight with adjustable comb ca. 3.620 g1. Weight with non-adjustable comb ca. 3.610 g1.
1 Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood. 2 Only available with Briley chokes.
▶ Light scroll engraving pattern ▶ Adjustable comb ▶ Standard wood ▶ Stock finish: epoxy ▶ Supplied in a gun case
11.334,00 €
11.852,00 €
K-80 Sporting shown with additional options and custom engraving
K-80 Parcours shown with additional options and custom engravingS
PO
RT
31
K R IEGHOFF K-80 W I T H SCR E W-IN CHOK ES
K-80 standard configuration with screw-in chokes: ▶ Free-floated barrel set ▶ Extended factory screw-in chokes, incl. five steel choke tubes and choke wrench ▶ Nickel plated steel action ▶ Hinge screws, top latch, screws and pins are blued ▶ Selectable, mechanical single trigger
You can find the available gauges of the different K-80 variations in the K-80 Matrix on page 38.
K-80 SportingBarrel length: 71 (28”), 76 (30”) or 81 cm (32”); soldered rib: 10 mm taper flat; “Sporting” stock with “Schnabel” forearm. Weight ca. 3.980 g1.
K-80 ProSporterBarrel length: 76 (30”) or 81 cm (32”); adjustable rib: 10 mm tapered (12 mm with chamfer); “Pro Sporter” stock with “Schnabel” forearm stock. Weight ca. 4.120 g1.
1 Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
▶ Length adjustable trigger blade ▶ Light scroll engraving pattern ▶ Adjustable comb ▶ Standard wood ▶ Stock finish: epoxy ▶ Supplied in a gun case
11.860,00 €
12.437,00 €
K-80 Sporting shown with additional options and custom engraving
K-80 ProSporter shown with additional options and engraving option “Renaissance”S
PO
RT
32
K-80 TrapBarrel length: 76 (30") or 81 cm (32"); soldered rib: 12 mm taper step; Monte Carlo style “Trap” right-handed stock with “Trap” forearm. Weight ca. 4.120 g1.
K-80 ProTrapBarrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 70/30; “ProTrap” right-handed stock with “Trap” forearm. Weight ca. 4.070 g1.
K-80 Trap SpecialBarrel length: 76 (30") or 81 cm (32"); adjustable rib: “Trap Special” 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 100 % (optionally “Pro” rib featuring 120 % high pattern); “Trap Special Rollover” right-handed stock with “Trap” forearm. Weight ca. 4.310 g1.
K-80 Double Trap SpecialBarrel length: 76 (30") or 81 cm (32"); adjustable rib: “Double Trap Special” 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 100 %; “Trap Special” right-handed stock, including an additional higher comb in black (see picture above); “Trap” forearm. Weight ca. 4.410 g1.
1 Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
11.860,00 €
12.437,00 €
12.612,00 €
12.962,00 €
K-80 ProTrap shown with additional options and engraving option “Heritage Game I”
K-80 Trap Special shown with additional options and adjustable butt plate as well as engraving option “Vintage Scroll”
K-80 Trap shown with additional options and engraving option “Super Scroll”
K-80 Double Trap Special shown with additional options and blued engraving option “Gold Standard”
SP
OR
T
33
K R IEGHOFF K-20
K-20 standard configuration: ▶ Free-floated barrel set ▶ Extended factory screw-in chokes, incl. five steel choke tubes and choke wrench ▶ Nickel plated steel action ▶ Hinge screws, top latch, screws and pins are blued
For available gauges of the K-20 variants, see page 34.
K-20 Sporting and Hunting Gun Barrel length: 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat, soldered; non-adjustable “Sporting” stock with “Schnabel” forearm. Weight ca. 3.500 g1.
K-20 ProSporterBarrel length: 76 (30") and 81 cm (32"); 10 mm tapered (12 mm with chamfer); adjustable “ProSporter” right-handed stock with “Schnabel” forearm. Weight ca. 3.690 g1.
K R IEGHOFF K X- 6 SPECI A L
KX-6 standard configuration: ▶ Nickeled action finish ▶ Extended factory screw-in chokes, incl. three choke tubes and choke wrench;
KX-6 – Single barrel shotgunBarrel length: 86 cm (34"); adjustable rib 12 mm taper flat; right-handed Monte Carlo “Trap” stock with adjustable comb and “Trap” forearm. Weight ca. 3.890 g1.
1 Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
▶ Selectable, mechanical single trigger ▶ Length adjustable trigger blade ▶ Light scroll engraving pattern ▶ Standard wood ▶ Stock finish: epoxy ▶ Supplied in a gun case
11.860,00 €
12.437,00 €
▶ Length adjustable trigger blade ▶ Supplied in a gun case
5.265,00 €
KX-6 Single Barrel Shotgun in standard configuration
K-20 Sporting and Hunting Gun shown with additional options and engraving option “Parcours Special”
K-20 ProSporter shown with additional options and custom engraving
SP
OR
T
34
S TA NDA R D G AUGES
K-80 ▶ 12/76 (3"), 20/76 (3"), 28/76 (3"), chambers are chrome plated ▶ .410/76 (3"), chambers are not chrome plated
K-20 ▶ 20/76 (3"), 28/76 (3"), chambers are chrome plated ▶ .410/76 (3"), chambers are not chrome plated
KX-6 ▶ 12/76 (3"), chambers are chrome plated
A list of all available barrel set combinations is shown on page 38.
A DDI T ION A L EQUIPMEN T
Krieghoff Balance System 1
▶ Barrel weight for K-80, gauge 12, per item The barrel can be provided with up to three additional 40 g weights underneath the forend, thus making an increase of 120 g at the front end possible.
▶ Stock weight for K-80 The buttstock can be equipped with a special stock bolt, which is 40 g heavier than a standard stock bolt, and can accept up to three additional 30 g weights. Thus, making buttstock up to 130 g heavier. Price for stock screw including on extra weight Price for further extra weights, per item
Adjustable butt plateFor K-80 Trap variants and KX-6 (Does not include pad) For all other K-80s (Includes recoil pad)
Length of pull adjustment option For K-80 and KX-6 – Length of pull can be easily adjusted with the addition of optional pre-fitted 6,4 mm (1/4") spacers. Only in conjunction with adjustable butt plate. Price per item.
Barrel portingFor gauge 12 – recoil and muzzle jump is reduced. Price per barrel.
“Matched Pairs”Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in colour, figure and weight. Both guns are identically balanced. Krieghoff HiViz Pro Shotgun Sight
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SUR FACE FINISH
▶ Blued action and forend iron, including all external metal parts ▶ Complete nickel finish of all external metal parts ▶ Nitrate surface treatment of action and forend iron, including all
external metal parts
1 Position is not discountable.
89,00 €
110,00 €47,00 €
389,00 €575,00 €
26,00 €
279,00 €
+10%
47,00 €
no extra charge131,00 €
475,00 €
SP
OR
T
35
IN T ERCH A NGE A BL E B A R R EL S
Please find a table of the interchangeable barrel options on page 38. Barrels do not include a forearm.
Interchangeable barrel K-80 with fixed chokes ▶ K-80 Sporting/Skeet
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32") ▶ K-80 Trap
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32") ▶ K-80 Parcours
Full length soldered barrel set; barrel length: 71 1 (28"), 76 (30") or 81 cm (32") Forend hanger for adapting free-floated barrel sets optional available
▶ K-80 Trap Special/ProSporter/ProTrap
Interchangeable barrel K-80 with screw-in chokesFree-floated barrel set; extended factory screw-in chokes, including two choke tubes and choke wrench
▶ K-80 Trap Rib: 12 mm taper step, soldered; barrel length: 76 (30") or 81 cm (32")
▶ K-80 ProTrap/K-80 ProSporter Gauge: 12/76, 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable; barrel length: 76 (30”) or 81 cm (32”)
▶ K-80 Trap Special Rib: “Trap Special” 10 mm taper flat, adjustable; highest selectable shot pattern: 100 % (alternative “Pro” rib with 120 % high pattern); barrel length: 76 (30") or 81 cm (32")
▶ K-80 Double Trap Special 2 Rib: “Double Trap Special” 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32")
▶ K-80 Sporting/Skeet Gauge: 12/76, 20/76 3, 28/76 3, .410/76 3; Rib: 10 mm taper flat, soldered; barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶ K-80 Unsingle/Topsingle Rib: 12 mm taper step, adjustable; barrel length: 86 cm (34")
Interchangeable barrel K-20 with screw-in chokesFree-floated barrel set; extended factory screw-in chokes, including two choke tubes and choke wrench
▶ K-20 Sporting Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, soldered; barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶ K-20 ProSporter Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32")
CHOK E T UBES
Factory screw-in chokes, 12, 20, 28 and .410 gaugeIt is not possible to retrofit factory choke tubes to fixed choke barrels. See Briley option below. Available in the following constrictions:Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2 (1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5). Super full choke tubes only available for 12 gauge.
1 Only available with Briley chokes.2 When using this barrel you may need a higher comb. Price on request.3 71 cm (28") barrel length on request.
3.770,00 €
3.770,00 €
4.201,00 €
price on request
4.303,00 €
4.878,00 €
4.878,00 €
5.007,00 €
4.303,00 €
5.868,00 €
4.303,00 €
4.878,00 €
97,00 €
SP
OR
T
36
Flush fitted screw-in chokes by Briley, 12 and 20 gauge 1
Subsequent fitting of Briley chokes possible for shotgun barrels with fixed chokes, also for barrels from other brands. Technical requirements will be checked carefully by our master gunsmiths before fitting. Price per barrel.
Briley screw-in chokes 1
Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2 (1+), 1/2 (2), 3/4 (3), 3/4–1/1 (LF), 1/1 (4), Super-1/1 (XF)One inch extended, non-ported Briley choke tubes are available on request.
Titanium screw-in chokes, 12 and 20 gauge For all guns featuring factory screw-in chokes.Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2 (1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5)
▶ Titanium screw-in chokes (color: silver) ▶ Titanium screw-in chokes in gold
Accessories ▶ Choke wrench ▶ “Speed” wrench for quick choke changes (12 and 20 gauge) ▶ Special grease for chokes ▶ Container for three chokes ▶ Container for five chokes
T I TA NIUM OP T IONS
Upcharge for titanium option instead of the standard configuration made of steel.
Titanium options ▶ Titanium trigger (including trigger group) ▶ Titanium front hanger ▶ Five titanium screw-in chokes of the standard configuration
Titanium options in gold ▶ Titanium trigger (including trigger group), in gold ▶ Titanium front hanger, in gold ▶ Five titanium screw-in chokes of the standard configuration, in gold
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Wood Upgrade ▶ Category 001 ▶ Category 002 ▶ Category 003 ▶ Category 004
Exclusive wood categories as stock blanks (hand-crafted)Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock.
▶ Category C1 ▶ Category C2 ▶ Category C3
1 Position is not discountable.
141,00 €
96,00 €
159,00 €211,00 €
36,00 €120,00 €
31,00 €19,00 €21,00 €
110,00 €52,00 €
306,00 €
279,00 €156,00 €567,00 €
452,00 €1.022,00 €1.508,00 €2.025,00 €
2.916,00 €3.789,00 €4.625,00 €
SP
OR
T
37
Stock in oil or epoxy finish 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications ▶ Special dimensions, custom made stock with ergonomic grip and finger grooves
Stock with adjustable comb and oil or epoxy finish 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications ▶ Special dimensions, custom made stock with ergonomic grip and finger grooves
30 minutes test shooting for custom made stocks on clay shooting range 1
Forearm in oil or epoxy finish 1
▶ Standard dimensions ▶ Special dimensions, made to customer’s specifications
Additional charge for left-handed stocks (in standard dimensions)(Not for K-20 Sporting)
Interchangeable stocks with adjustable comb and epoxy finish ▶ “Trap” Monte Carlo, ProTrap or “International Skeet/Sporting” stock,
model K-80 ▶ “ProSporter” stock, model K-80 or K-20 ▶ “Trap Special Rollover” stock, model K-80
Interchangeable stocks with non-adjustable comb and epoxy finish ▶ “Sporting and Hunting Gun”, model K-80 or K-20
Interchangeable forearm (forend iron not included) in oil or epoxy finish ▶ “Trap” or “Skeet”, model K-80 ▶ Schnabel forearm, model K-80 or K-20 ▶ “Parcours” forearm, model K-80
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the top latch or the trigger guard.
Monogram plate, finished the same as the receiver 2
▶ Inlet into pistol grip cap ▶ Steel pistol grip cap
Monograms ▶ Two letters engraved ▶ Two letters engraved in relief style ▶ Two letters in silver ▶ Two letters in gold
Locks ▶ Internal lock parts nickel plated ▶ Internal lock parts gold plated, trigger not included ▶ Trigger gold plated (including trigger group) ▶ Titanium trigger (including trigger group), in gold
1 Position is not discountable.2 Only available in conjunction with custom made stock.
737,00 €1.072,00 €1.601,00 €
1.160,00 €1.494,00 €2.033,00 €
150,00 €
194,00 €447,00 €
340,00 €
1.139,00 €
1.139,00 €1.312,00 €
1.139,00 €
201,00 €201,00 €201,00 €
138,00 €403,00 €
254,00 €368,00 €601,00 €821,00 €
416,00 €941,00 €168,00 €279,00 €
SP
OR
T
38
CALI
BR
E 12
CALI
BR
E 20
CALI
BR
E 28
CALI
BR
E .4
10R
IBCH
OK
E-T
YP
E
Bar
rel l
engt
hB
arre
l len
gth
Bar
rel l
engt
hB
arre
l len
gth
Wid
th in
mm
Fixe
d ch
okes
Scr
ew-i
n ch
okes
71 cm | 28"
76 cm | 30"
81 cm | 32"
86 cm | 34”
71 cm | 28"
76 cm | 30"
81 cm | 32"
71 cm | 28"
76 cm | 30"
81 cm | 32"
71 cm | 28"
76 cm | 30"
81 cm | 32"
8–6
10–6
12–8
1/2–3/4 MOD-IMOD
3/4–4/4 IMOD-FULL
Sk–Sk Skeet
opening
Krieghoff Steel
KrieghoffTitanium 1
BrileyThinWall 1
SCREW-IN CHOKES
Sp
orti
ng/
Skee
t●
●●
——
●●
—●
●—
●●
—●
—●
●—
Pro
Sp
orte
r—
●●
——
●●
—●
●—
●●
—●
3—
●●
—
Trap
—●
●—
——
● 2
●●
—
Pro
Trap
—●
●—
—●
3—
●●
—
Trap
Sp
ecia
l—
●●
——
● 3
—●
●—
Dou
ble
Trap
Spe
cial
—●
●—
—●
3—
●●
—
Un
sin
gle
——
—●
Tops
ingl
e—
——
●
FIXED CHOKES
Sp
orti
ng
—●
●—
—●
——
●○
○—
—○
Par
cou
rs○
4●
●—
——
●●
——
●●
○○
——
○
Trap
—●
●—
——
● 2
—●
○○
——
○
Ske
et—
●●
——
●—
——
●○
——
○
● ○ —
Stan
dar
d ve
rsio
n (n
o ex
tra
char
ge)
Opt
ion
alN
ot a
vail
able
1 2 3 4
On
ly a
vail
able
in
cali
bre
12 a
nd
20Ta
pere
d st
ep r
ib12
–8 m
m t
aper
ed r
ib w
ith
cham
fer
On
ly a
vail
able
wit
h B
rile
y ch
okes
Oth
er b
arre
l an
d ri
b m
odel
s on
req
ues
t.
K-8
0 M
AT
RIX
BA
RR
EL
SE
T C
OM
BIN
AT
ION
S
SP
OR
T
39
Add
itio
nal e
quip
men
tA
dju
stab
le b
utpl
ate
(A
ssem
bly
grou
p in
cl.
pad)
— 2
73 g
Spac
er —
24
g
Chok
e Tu
bes
Fact
roy
scre
w-i
n ch
okes
— 2
4 g1
Bri
ley
scre
w-i
n ch
okes
— 1
4 g1
Tit
an s
crew
-in
chok
es —
18
g1
Tita
n o
pti
ons
Tit
aniu
m t
rigg
er,
lon
g —
5 g
Stee
l tri
gger
, lo
ng
— 1
0 g
Tit
aniu
m t
rigg
er,
shor
t —
5 g
Stee
l tri
gger
, sh
ort
— 1
0 g
Tit
aniu
m f
ront
han
ger
— 8
g2
Stee
l fro
nt h
ange
r —
12
g2
Wei
ght
of c
ase
K-8
0 ca
se c
ompl
ete—
1.0
60 g
1
Wei
ght
of c
hok
e tu
bes
exem
plar
y fo
r 1/
2 ch
oke,
cal
. 12
2
Wei
ght
exem
plar
y fo
r fr
ont
han
ger
No.
4
Gew
ich
t W
ech
sellä
ufe
K-8
0
CALI
BR
E 12
CALI
BR
E 20
CALI
BR
E 28
CALI
BR
E .4
10
Bar
rel l
engt
hB
arre
l len
gth
Bar
rel l
engt
hB
arre
l len
gth
71 cm | 28"
76 cm | 30"
81 cm | 32"
86 cm | 34”
71 cm | 28"
76 cm | 30"
81 cm | 32"
71 cm | 28"
76 cm | 30"
81 cm | 32"
71 cm | 28"
76 cm | 30"
81 cm | 32"
WECHSELCHOKE
Spor
tin
g/Sk
eet
1.54
0 g
1.61
8g1.
669
g—
—1.
680
g1.
730
g—
1.66
6 g
1.71
3 g
—1.
705
g1.
769
g
Pro
Spor
ter
—1.
682g
1.72
6 g
——
1.71
5 g
1.76
8 g
—1.
719
g1.
767
g—
1.74
1 g
1.78
9 g
Trap
—1.
633g
1.67
5 g
—
Pro
Trap
—1.
682g
1.72
6 g
—
Trap
Sp
ecia
l—
1.69
0g1.
776
g—
Dou
ble
Trap
Spe
cial
—1.
700g
1.75
6 g
—
Un
sin
gle
——
—1.
733
g
Tops
ingl
e—
——
1.73
2 g
FESTCHOKE
Spor
tin
g—
1.58
3 g
1.62
6 g
—
Par
cou
rs1.
280
g1.
350
g1.
378
g—
——
1.37
8 g
Trap
—1.
607
g1.
634
g—
Ske
et—
1.58
3 g
1.62
6 g
—
Dev
iati
ons
poss
ible
K-8
0 M
AT
RIX
BA
RR
EL
SE
T W
EIG
HT
S A
ND
OP
TIO
NS
SP
OR
T
40
u
v
w
x x x
u
z
z
Length of pull Length of grip Drop Cast Pitch
K-8
0
Sporting/Skeet365 mm 91 mm 40 mm 55 mm 68 mm 4 mm 11 mm
7°14,37“ 3,58” 1,57” 2,16” 2,68” 0,16” 0,43”
ProSporter365 mm 89 mm 40 mm 55 mm 68 mm 3 mm 11 mm
7°14,37“ 3,50” 1,57” 2,16” 2,68” 0,12” 0,43”
Parcours365 mm 96 mm 40 mm — 2 52 mm 6 mm 9 mm
5°14,37“ 3,78“ 1,57” — 2 2,05” 0,24” 0,35”
Trap365 mm 91 mm 45 mm 45 mm 53 mm 3 mm 9 mm
0°14,37“ 3,58” 1,77” 1,77” 2,09” 0,12” 0,35”
ProTrap365 mm 89 mm 45 mm 45 mm 54 mm 3 mm 9 mm
0°14,37“ 3,50” 1,77” 1,77” 2,13“ 0,12” 0,35”
Trap Special365 mm 93 mm 41 mm 41 mm 67 mm 3 mm 13 mm
0°14,37“ 3,66“ 1,61” 1,61” 2,24” 0,12” 0,51”
Doppeltrap Special365 mm 93 mm 41 mm 41 mm 82 mm 3 mm 13 mm
0°14,37“ 3,66“ 1,61” 1,61” 3,23” 0,12” 0,51”
K-2
0 Sporting1365 mm 97 mm 38 mm 56 mm 68 mm 5 mm 6 mm
7°14,37“ 3,82“ 1,50” 2,20” 2,68” 0,20” 0,24”
ProSporter365 mm 97 mm 38 mm 54 mm 67 mm 3 mm 8 mm
7°14,37“ 3,82“ 1,50” 2,13” 2,64” 0,12” 0,31”
Adjustable combs can be adjusted 14 mm upwards and respectively 5 mm left and right of the cast.
1 All stocks, except for the K-20 Sporting, are available as right- and left-handed stock.
2 Straight comb (without Monte-Carlo)
K -80, K -20 S T O C K D I M E N S I O N S
u Aiming line (Height of rib)v Length of pullw Length of gripx Dropy Pitchz Cast
SP
OR
T
41
K R IEGHOFF ESSENCI A
Essencia side-by-side shotgun standard configuration: ▶ Round-bodied steel receiver ▶ Sidelocks ▶ Purdey-style third bite ▶ Double barrel-hook lock-up ▶ Ejectors ▶ Fine English scroll engraving with gold accented inlays
Essencia 12 side-by-side shotgun ▶ Gauge: 12/70; Barrel length: 71 cm (28"), 76 cm (30")
Essencia 20 side-by-side shotgun ▶ Gauge: 20/76; barrel length: 68 cm (27"), 71 cm (28"), 76 cm (30") ▶ Gauge: 16/70; barrel length: 71 cm (28") ▶ Gauge: 16/70; barrel length: 76 cm (30") ▶ Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30")
Essencia 28 side-by-side shotgun ▶ Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30") ▶ Gauge: .410/76; barrel length: 71 cm (28")
A DDI T ION A L EQUIPMEN T
Nitrated surface finish
Optional single trigger
Interchangeable barrels for 20 gauge frame ▶ 20 gauge barrel; without forearm ▶ 16 gauge barrel; barrel length: 71 cm (28") including forearm ▶ 16 gauge barrel; barrel length: 76 cm (30") including forearm ▶ 28 gauge barrel; with forearm
Interchangeable barrels for 28 gauge frame ▶ 28 gauge barrel; without forearm ▶ .410/76 gauge barrel; barrel length: 71 cm (28") including forearm
“Matched Pairs”Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in colour, figure and weight. Both guns are identically balanced.
▶ Color case-hardened finish ▶ Choice of straight-grip or Prince-of-Wales pistol grip stock ▶ Wood category 003 ▶ Traditional Tru-Oil finish ▶ Supplied in an exclusive leather hard case
32.023,00 €
31.663,00 €31.663,00 €32.091,00 €32.649,00 €
35.715,00 €36.994,00 €
no extra charge
1.283,00 €
9.791,00 €12.370,00 €12.816,00 €13.363,00 €
10.903,00 €14.207,00 €
+10%
Krieghoff EssenciaSidelock side-by-side shotgun
Length of pull Length of grip Drop Cast Pitch
K-8
0
Sporting/Skeet365 mm 91 mm 40 mm 55 mm 68 mm 4 mm 11 mm
7°14,37“ 3,58” 1,57” 2,16” 2,68” 0,16” 0,43”
ProSporter365 mm 89 mm 40 mm 55 mm 68 mm 3 mm 11 mm
7°14,37“ 3,50” 1,57” 2,16” 2,68” 0,12” 0,43”
Parcours365 mm 96 mm 40 mm — 2 52 mm 6 mm 9 mm
5°14,37“ 3,78“ 1,57” — 2 2,05” 0,24” 0,35”
Trap365 mm 91 mm 45 mm 45 mm 53 mm 3 mm 9 mm
0°14,37“ 3,58” 1,77” 1,77” 2,09” 0,12” 0,35”
ProTrap365 mm 89 mm 45 mm 45 mm 54 mm 3 mm 9 mm
0°14,37“ 3,50” 1,77” 1,77” 2,13“ 0,12” 0,35”
Trap Special365 mm 93 mm 41 mm 41 mm 67 mm 3 mm 13 mm
0°14,37“ 3,66“ 1,61” 1,61” 2,24” 0,12” 0,51”
Doppeltrap Special365 mm 93 mm 41 mm 41 mm 82 mm 3 mm 13 mm
0°14,37“ 3,66“ 1,61” 1,61” 3,23” 0,12” 0,51”
K-2
0 Sporting1365 mm 97 mm 38 mm 56 mm 68 mm 5 mm 6 mm
7°14,37“ 3,82“ 1,50” 2,20” 2,68” 0,20” 0,24”
ProSporter365 mm 97 mm 38 mm 54 mm 67 mm 3 mm 8 mm
7°14,37“ 3,82“ 1,50” 2,13” 2,64” 0,12” 0,31”
Adjustable combs can be adjusted 14 mm upwards and respectively 5 mm left and right of the cast.
1 All stocks, except for the K-20 Sporting, are available as right- and left-handed stock.
2 Straight comb (without Monte-Carlo)
ES
SE
NC
IA
42
Essencia single shot rifle standard configuration: ▶ Round-bodied steel receiver ▶ Sidelocks ▶ Double barrel-hook lock-up ▶ Barrel length: 60 cm (24") ▶ Octagonal barrel ▶ Color case-hardened finish
Essencia single shot rifle
AVA IL A BL E C A LIBR ES
Available in the following constrictions: .243 Win., 6.5x57R, 6.5x65R, .270 Win., 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS, 9.3x74R
A DDI T ION A L EQUIPMEN T
Nitrated surface finish
Ejector
Fluted octagonal barrel
Full length stock (“Stutzen”)
Interchangeable barrel without forearm
“Matched Pairs”Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in colour, figure and weight. Both guns are identically balanced.
▶ Fine English scroll engraving with gold accented inlays ▶ Stock with cheeckpiece ▶ Wood category 003 ▶ Traditional Tru-Oil finish ▶ Supplied in an exclusive leather hard case
35.885,00 €
no extra charge
4.784,00 €
1.367,00 €
2.223,00 €
10.319,00 €
+10%
Krieghoff EssenciaSidelock single shot rifle
ES
SE
NC
IA
43
Essencia side-by-side “Big Five” double rifle standard configuration: ▶ Round-bodied steel receiver ▶ Sidelocks ▶ Double barrel-hook lock-up ▶ Barrel length: 63.5 cm (25") ▶ Purdey-style third bite ▶ Double trigger ▶ Manual safety ▶ Automatic Holland & Holland style ejector
Essencia “Big Five” double rifle
AVA IL A BL E C A LIBR ES
Available in the following constrictions: .450/.400 N.E., .500/.416 N.E., .470 N.E., .500 N.E.
A DDI T ION A L EQUIPMEN T
Nitrated surface finish
Interchangeable barrel with forearm
“Matched Pairs”Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in colour, figure and weight. Both guns are identically balanced.
▶ Fine English scroll engraving with gold accented inlays ▶ Color case-hardened finish ▶ Traditional style “Express” stock with cheekpiece and pistol grip ▶ Wood category 003 ▶ Traditional Tru-Oil finish ▶ Supplied in an exclusive leather hard case
50.625,00 €
no extra charge
21.478,00 €
+10%
Krieghoff EssenciaSidelock “Big Five” double rifle
ES
SE
NC
IA
44
ENGR AV ING OP T IONS
The engraving patterns listed below are just a small sampling of the wood categories and engraving combinations most frequently requested. In line with our philosophy of quality, all our engravings are worked into the material of the action itself and never on attached plates. The wood grade and surface finish of the metal parts can be chosen freely. Together with the engraving patterns listed below, we just give you a recommendation of a certain wood grade in combination with a specific metal part surface treatment, which compliments the appearance of the gun. The corresponding extra cost for wood upgrades and metal part treatments, you will find under category “stocks & wood-work” and “surface finish”.
HUN T ING GUNS – ENGR AV ING OP T IONS
“Standard”Ornamental line engraving borders receiver. Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued.
no extra charge
“Safari Scroll”Full covering ornamental engraving. Receiver nickel plated. We recommend wood category 001.
654,00 €
“Small arabesques”Hand engraved arabesque pattern on both sides.Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued.
583,00 €
“Small game scene with leaf arabesques”Detailed game scene surrounded by leaf arabesque en-graving. Motif for the game engraving each side can be chosen freely. Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued. We recommend wood category 001.
763,00 €
EN
GR
AV
ING
S
45
“Big Game”Detailed game scene “African Game”. Motif for the game engraving each side can be chosen freely. We recommend wood category 002 combined with a nickeled finish of all external metal parts.
1.196,00 €
“Full oak leaves”Luxurious, overall covering featuring deep engraved oak leaves each side, as well as an engraved trigger guard. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
3.057,00 €
“Large game scene with leaf arabesques”Elaborate engraving featuring two animals surround-ed by leaf arabesques, as well as an engraved trigger guard. Scenes for the game engravings can be chosen freely.We recommend wood category 002 combined with a nickeled finish of all external metal parts.
1.680,00 €
“Small game scene with oak leaves”Detailed game scene surrounded by oak leaf engraving. Motif for the game engraving each side can be chosen freely. We recommend wood category 002 combined with a nickeled finish of all external metal part
1.267,00 €
“Large game scene with oak leaves”Elaborate engraving featuring two animals surrounded by oak leaves, as well as an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
3.057,00 €
“Fine English with roses & bouquet”Comprehensive overall covering featuring fine English arabesques with rose & bouquet, as well as an engraved trigger guard. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
4.562,00 €
EN
GR
AV
ING
S
46
HUN T ING GUNS – ENGR AV ING OP T IONS W I T H SIDE PL AT ES
The necessary side plates 1 for “S”-style engraving patterns are included in the price shown.
1 Steel receiver only
“Small English scroll”Modest arabesque engraving per side, as well as on the trigger guard. We recommend wood category 002 combined with a nickeled finish of all external metal parts.
2.124,00 €
“Imperial”Fine English arabesques in medallion-style, featuring Krieghoff lettering as a banderole. We recommend wood category 004 combined with nitrate receiver finish.
“Gold Imperial”Same design including golden Krieghoff lettering as a banderole.
5.390,00 €
5.782,00 €
“Large game scene with leaf arabesques”Elaborate engraving featuring three animals surrounded by leaf arabesques each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
4.183,00 €
“Small game scene with leaf arabesques”Medallion of one deep engraved animal per side, sur-rounded by distinctive leaf arabesques in combination with an engraved trigger guard. Scenes for the game engravings each side can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
4.295,00 €
“Large game scene with English arabesques”Elaborate engraving featuring three animals surrounded by English arabesques each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts.
5.027,00 €
“Large game scene with oak leaves”Elaborate engraving featuring three animals surround-ed by oak leaves each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 004 combined with a nickeled finish of all external metal parts.
6.465,00 €
EN
GR
AV
ING
S
47
Standard – blackBlack anodized action finish without engraving.We recommend standard wood category.
no extra charge
“Small arabesques”Finely engraved arabesques on both sides combined with a nickel finish.We recommend wood category 001.
224,00 €
Standard – nickel finishNickel plated action finish without engraving. We recommend standard wood category. no extra charge
“Large game scene with leaf arabesques”Elaborate engraving featuring two animals each side surrounded by leaf arabesques, as well as an engraved trigger guard. Motifs: red deer and wild boars. Nickel plated action finish. We recommend wood category 002.
565,00 €
SEMPR IO – ENGR AV ING OP T IONS
Interchangeable action frame ▶ Action frame in standard, featuring nickel plated or
black anodized action finish ▶ Action frame with “small arabesque” engraving,
combined with a nickel finish ▶ Action frame with “large game scene with leaf arabesques” engraving,
combined with a nickel finish
217,00 €
454,00 €
808,00 €
EN
GR
AV
ING
S
48
COMPE T I T ION SHO T GUNS – ENGR AV ING OP T IONS
StandardLight scroll engraving pattern. Nickel finish – top latch, screws and pins are blued.
no extra charge
“Vintage Game I”Modest ornamental engraving featuring wildfowl scenes with two motifs per side.We recommend wood category 001 combined with ni-trate receiver finish.
449,00 €
“Vintage Scroll”Modest ornamental engraving with nickel finish. Optional finishes include nitride or blued.
131,00 €
“Celtic”Spacious Celtic ornament. We recommend wood category 001 combined with nickel finish.
873,00 €
„Parcours“Completely covering curled ornaments. We recommend wood category 001 combined with nick-el finish.
812,00 €
„K-80 Logo“K-80 logo along with border line on both sides, as well as Krieghoff emblem and lettering on the underside of the receiver. We recommend wood category 001 combined with nick-el finish.
230,00 €
EN
GR
AV
ING
S
49
“Rausch Scroll”Wide curled leaf ornaments. We recommend wood category 002 combined with nickel finish.
1.602,00 €
“Sovereign Scroll”Completely covering acanthus leaves. We recommend wood category 002 combined with nitrate receiver finish.
1.490,00 €
“Gold Standard”Standard engraving with gold border line. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 002 combined with blued surface finish. 2.338,00 €
“Parcours Special”Relief engraving featuring wildfowl scenes. Three differ-ent styles of engraving patterns are available. We recommend wood category 003 combined with nick-el finish.
2.986,00 €
“K-80 Logo Silver”K-80 logo along with border line on both sides, as well as Krieghoff emblem and lettering on the underside of the receiver all inlaid in silver. We recommend wood category 003 combined with blued surface finish.
2.752,00 €
„Vienna“Completely covering, rich in contrast leaf ornaments. We recommend wood category 002 combined with nick-el finish.
990,00 €
EN
GR
AV
ING
S
50
“Plantation”Completely covering fine English arabesques. Medal-lion-style game scene. Motifs: partridge and pigeon.We recommend wood category 003 combined with nitrate receiver finish.
3.758,00 €
“Suhl Scroll”Diamond-shaped ornamental engraving featuring leaf arabesques. We recommend wood category 003 combined with nick-el finish.
4.641,00 €
“Plantation Scroll”Completely covering fine English arabesques. We recommend wood category 003 combined with nick-el finish.
4.034,00 €
“Uplander”Completely covering fine English arabesques. Medal-lion-style game scene. Motifs: ruffed grouse and wood-cock.We recommend wood category 003 combined with nitrate receiver finish.
3.758,00 €
“K-80 Logo Gold”K-80 logo along with border line on both sides, as well as Krieghoff emblem and lettering on the underside of the receiver all inlaid in gold. We recommend wood category 003 combined with blued surface finish.
3.653,00 €
“Super Scroll”Completely covering ornamental engraving. We recommend wood category 003 combined with nick-el finish.
3.337,00 €
EN
GR
AV
ING
S
51
“Bavaria Royale”Game scene with two motifs per side engraved in medal-lion-style, bordered by leaf arabesques. We recommend wood category 004 combined with nick-el finish.
5.435,00 €
“Gold Super Scroll”Completely covering ornamental engraving. Border line as well as Krieghoff emblem and lettering on the under-side of the receiver inlaid in gold. Broken target in gold on top latch. We recommend wood category 004 combined with nitrate receiver finish.
7.598,00 €
“Gold Celtic”Spacious Celtic ornamental engraving inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
5.406,00 €
“Victorian Scroll”Fine English arabesques in shape of large scrolls. We recommend wood category 004 combined with nitrate receiver finish.
5.756,00 €
“Gold Uplander”Completely covering fine English arabesques. Medal-lion-style game scene. Motifs: ruffed grouse and wood-cock inlaid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.We recommend wood category 004 combined with ni-trate receiver finish.
6.851,00 €
“Gold Plantation Scroll”Completely covering engraving with fine English ara-besques. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.We recommend wood category 004 combined with ni-trate receiver finish.
5.929,00 €
EN
GR
AV
ING
S
52
“Asprey Scroll”Completely covering large acanthus leaves. We recommend wood category 004 combined with nitrate receiver finish.
8.845,00 €
“Bavaria Suhl”Ornamental engraving with mystical faces. Medal-lion-style hunting scenes with three motifs per side. We recommend wood category 004 combined with ni-trate receiver finish.
10.198,00 €
“Gold Victorian Scroll”Fine English arabesques in shape of large scrolls. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.We recommend wood category 004 combined with ni-trate receiver finish.
8.993,00 €
“Heritage Scroll”Fine English arabesques with a modest banderole and a gold border line. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.We recommend wood category 004 combined with nitrate receiver finish.
8.349,00 €
“Vintage Game II”Modest ornamental engraving featuring wildfowl scenes. Two motifs per side inlaid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
7.697,00 €
“Gold Plantation”Completely covering fine English arabesques. Medal-lion-style game scene. Motifs: partridge and pigeon in-laid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with ni-trate receiver finish.
6.851,00 €
EN
GR
AV
ING
S
53
“Bavaria Suhl Mystic”Ornamental engraving with mystical faces. We recommend wood category 004 combined with ni-trate receiver finish.
10.198,00 €
“Highland Game I”Flowing thistle leaf ornamentals featuring wildfowl scenes. Three motifs per side.We recommend wood category 003 combined with nitrate receiver finish.
10.130,00 €
“Gold Bavaria Royale”Game scene with two animals inlaid in gold, engraved in medallion-style and surrounded by leaf arabesques. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
11.259,00 €
“Highland Game II”Flowing floral ornamentals featuring wildfowl scenes. Three motifs per side.We recommend wood category 003 combined with nitrate receiver finish.
10.130,00 €
“Waterfowl Medallion”Completely covering acanthus leaves. Waterscape with mallards and northern pintails engraved in medal-lion-style and surrounded by leaf arabesques.We recommend wood category 004 combined with ni-trate receiver finish.
10.543,00 €
“Monarch”Full covering leaf arabesques with gold border line. We recommend wood category 004 combined with ni-trate receiver finish.
10.247,00 €
EN
GR
AV
ING
S
54
“San Remo”Wildfowl in flight or hunting scene featuring leaf ara-besques. We recommend wood category 004 combined with nitrate receiver finish.
11.988,00 €
“Vintage Game III”Modest ornamental engraving with gold accents and wildfowl scenes. Three animals in gold per side. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with ni-trate receiver finish.
12.827,00 €
“Heritage Game I”Wildfowl surrounded by fine English Arabesques. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 003 combined with ni-trate receiver finish.
12.344,00 €
“Gold Highland Game II”Flowing floral ornamentals featuring wildfowl scenes, accented by gold details. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
12.952,00 €
“Gold Highland Game I”Flowing thistle leaf ornamentals featuring wildfowl scenes, accented by gold details. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
12.952,00 €
“Renaissance”Completely covering floral ornamentation, accented by gold details. Gold inlaid lettering on the underside of the receiver. We recommend wood category 004 combined with ni-trate receiver finish.
11.071,00 €
EN
GR
AV
ING
S
55
“Crown Grade”Wildfowl or hunting scenes, expressed in gold relief. The medallion-style engraving is completely framed by leaf arabesques. Two motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. Golden crown on top lever. We recommend wood category 004 combined with ni-trate receiver finish.
19.424,00 €
“Gold Heritage Game”Medallion of wildfowl scene, framed by fine English arabesques. Three motifs per side in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
22.680,00 €
“Heritage Game II”Gold inlaid medallion of wildfowl scene, framed by fine English arabesques. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the under-side of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish.
18.630,00 €
A display of pictures, regarding further custom engravings, you will find under: www.krieghoff.de/en/engravings.
EN
GR
AV
ING
S
56
CUS T OM ENGR AV INGS
For years, engravers have artfully applied the finishing touch to guns, lending them a unique character and an expression of their worth. Initial sketches, stemming from a dialogue with the gun owner, are used to produce a harmonious design encompassing motif, style and material.
Krieghoff engravers have a comprehensive repertoire: from deep relief to the very finest Bulino style and from classic hunting scenes to the multifaceted ornamentations of various eras. From precious metal in-lays to surface finishing – there are no limits to their creative imagination.
Using their experience, finesse and talent, our engravers create fine works of art that reflect both the passion and personality of the owner and the value and quality of an exquisite gun.
Our master engravers are able to realize virtually any special engraving requirement including the most intricate custom engravings. For a proposal send us your request!
Price for plain, unengraved side plates 1
Engraving and wood upgrades are not included.
1 Steel receiver only
637,00 €
Custom Engraving IDeep engraved, full covering leaf arabesques with ornamentic barrel base.
Custom Engraving IIIDeep relief-style engraved wild boar scene with oak leaves, surrounded by fine English arabesques.
Custom Engraving IIRelief-style engraved hunting scene, covered in oak and thistle leaf with fine detailed elegant gold surrounding line.
Custom Engraving IVFour different golds – yellow, white, green and red – create the background for the Bulino style horses. Accents applied in enamel.
A display of pictures, regarding further custom engravings, you will find under: www.krieghoff.de/en/engravings.
EN
GR
AV
ING
S
VA R IOUS
SERV ICE
Fitting of choke tubes, altering fixed chokes into screw-in chokes for all brands: We offer the installation of thin-walled Briley choke tubes into shotgun barrels, also for other brands. Technical requirements will be checked carefully by our master gunsmiths before fitting. After the fitting the gun has to be re-proofed by the Proofhouse.
▶ Fitting of chokes per barrel for over & unders or drillings 1
▶ Fitting of one choke into a single barrel shotgun 1
▶ Service charge for C. I. P. barrel proof
▶ Service charge for C. I. P. barrel proof (steel shot)
Flush mount Briley choke tubes for gauges 12, 16 and 20 1
Available in the following constrictions:Cylinder (CYL), Skeet (SK), 1/4 (IC), 1/4–1/2 (LM), 1/2 (MOD), 3/4 (IMOD), 3/4–1/1 (LF), 1/1 (F) and Super-1/1 (XF)
Chokes accessories ▶ Choke wrench ▶ “Speed” wrench for quick choke changes (12 and 20 gauge) ▶ Briley Special grease for chokes ▶ Krieghoff Container for three chokes ▶ Briley Container for five chokes ▶ One inch extended, non-ported Briley choke tubes
Adjustable butt plate for K-80 and KX-6, including fitting of the aluminium base plate
Krieghoff Annual-Service K-80/-K-20 This service includes checking the gun for headspace, overcock, proper tolerances of sears, ejectors and hammers and complete disassembly and replacement of springs as needed throughout the receiver and forend iron. All parts are inspected for wear and minor trigger and timing adjustments are made if needed. The gun is cleaned and lubed. The barrel is tightened to the actions when possible. Replacement of bro-ken or badly worn parts is available, at additional cost.
1 Position is not discountable.
141,00 €
220,00 €
55,00 €
62,00 €
96,00 €
36,00 €120,00 €
31,00 €19,00 €21,00 €
price on request
575,00 €
505,00 €
Periodical maintenance of your Krieghoff quality products ensures the reliability and safety of your weapon to 100%, even after years of use.
VA
RIO
US
57
GUN C A SES
A display of pictures, regarding gun cases, can be found on page 60.
Exclusive leather case line in “Alba” leather-styleHigh-quality, brown leather gun case, made of precious “Alba” leather. The case comes with a leather handle, and two securing leather straps. Additionally the cor-ners of the case are reinforced with hand-stiched “Alba” leather patches for maxi-mum durability. Two combination locks. The case interior is made of blue felt.An individual custom-fit for the particular gun will be accomplished at the Krieghoff factory. Price including modification services.
▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including scope Weight: ca. 4,7 kg
▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes and one extra barrel Weight: ca. 5,5 kg
▶ For over & under shotguns, up to a barrel length of 81 cm (32") Weight: ca. 3,9 kg
Aluminum gun caseHigh quality aluminum gun case, with stylish panels bearing the Krieghoff logo on the exterior, and bordeaux red interior lining with the Krieghoff logo embroidered. Especially safe due to two key and one combination lock. With separate compartments for scope, ammunition and accessories. An individual custom-fit for the particular gun will be accomplished at the Krieghoff factory. Price including modification services.
▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including scope Weight: ca. 6,7 kg
▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes and one extra barrel Weight: ca. 7,4 kg
▶ For over & under shotguns, up to a barrel length of 86 cm (34") Weight: ca. 6,4 kg
▶ For over & under shotguns, up to a barrel length of 81 cm, with adjustable rib (K-80 ProSporter, K-80 ProTrap, K-80 Trap Special) Gewicht: ca. 6,2 kg
▶ For over & under shotguns, up to a barrel length of 86 cm (34"), including one extra barrel Weight: ca. 8,0 kg
Krieghoff GunPackThis hard-top gun case is made out of black, shock resistant “ABS” plastic material assembled by ultrasonic welding and the addition of “ABS” at the fluid state. A Krieghoff lettering in gold is on the upper left of the outer front and inner top part. The inside is made out of velvet-like, blue cloth. It is pre-formed to exactly fit your hunting gun, a scope, and accessories or ammunition. Four hook-and-loop fasteners additionally secure the content. Four “push” catches avoid unwanted opening.
Krieghoff GunPack for Hunting Guns ▶ Barrel length: max. 74 cm (29") ▶ Weight: ca. 2,6 kg
Krieghoff GunPack for Semprio ▶ Barrel length: max. 79 cm (31") ▶ Weight: ca. 2,6 kg
Krieghoff gun case – premium editionA high class hard-top gun case is made out of shock resistant “ABS” plastic material assembled by ultrasonic welding and the addition of “ABS” at the fluid state. Brown leather application trims the edges and Krieghoff is printed in gold on the front.The inner is made of velvet-like cloth. The bottom part is pre-formed and offers space for the receiver-stock-unit, securable by hook-and-loop fastener, as well as accessories. The upper part is pre-formed for two barrels. The divider pad can be attached to the upper part with two hook-and-loop fasteners securing barrels and ex-tras. Your gun is safe from unauthorised access with three - independently settable - combination locks.
1.418,00 €
1.594,00 €
1.418,00 €
919,00 €
1.056,00 €
919,00 €
1.239,00 €
1.056,00 €
52,00 €
52,00 €
VA
RIO
US 58
Krieghoff gun case for hunting guns – premium editionSuitable for all Krieghoff huntings guns (except for the Krieghoff Ultra) including one scope.
▶ Color: green/blue ▶ Barrel length: max. 87 cm (34") ▶ Weight: ca. 2,8 kg
Krieghoff gun case for Semprio – premium editionIncluding two scopes and one extra barrel
▶ Color: green/blue ▶ Barrel length: max. 87 cm (34") ▶ Weight: ca. 4,2 kg
Krieghoff gun case for K-80 – premium edition ▶ Color: blue/red ▶ Barrel length: max. 87 cm (34") ▶ Weight: ca. 3,4 kg
Krieghoff gun case for K-80 Combo– premium editionIncluding one extra barrel and accessories
▶ Colour: blue/red ▶ Barrel length: max 87 cm (34”) ▶ Weight: ca. 4,6 kg
Krieghoff barrel case ▶ For one barrel set max length 91 cm
SHOO T ING V ES T S
A display of pictures, regarding shooting vests, can be found on page 58.
Krieghoff “London” shooting vest – left and right-handed
Krieghoff “Performence” shooting vest – left and right-handed
VA R IOUS
Krieghoff neoprene gun strapThe elastic neoprene material allows for highest wearing comfort and offers optimal protection against the strap sliding off the shoulder. With Krieghoff emblem embossed.
▶ Standard version ▶ Exclusive version – with leather top
Gun care ▶ “Gun Glide”, gun grease, 50 g tube ▶ Special grease for chokes
292,00 €
329,00 €
305,00 €
342,00 €
105,00 €
180,00 €
180,00 €
50,00 €66,00 €
16,00 €31,00 €
Additional accessories like hats, shirts, books, DVDs etc. you will find under: www.krieghoff.de/shop
VA
RIO
US
59
A PPENDIX
Alba leather case
Krieghoff Gun Case for K-80 – Premium Edition
Krieghoff barrel case
Barrel porting for Semprio
Aluminium gun case
Krieghoff gun case – premium edition
Krieghoff see through sight for hunting guns
Fluted barrel for Semprio
VA
RIO
US 60
“Compact” version with additional sling swivels on the side of forend and buttstock
Muzzle threading with and without individually adapted thread cover bushing
Factory chokes (black) ,optional titanium chokes (polished) and optional titanium chokes in gold
Krieghoff Balance System – barrel weights
Krieghoff see through sight for Semprio
Semprio Pro Mount
Barrel porting for K-80
Krieghoff Balance System – stock weights
VA
RIO
US
61
Krieghoff HiViz Pro Shotgun Sight Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
Monogram in gold on the trigger guard
Inlet into pistol grip cap with custom engraving
Broken target in gold on top latch.
Length of pull adjustment
Steel pistol grip cap with custom engraving
“Imperial design” – extended steel trigger guard
VA
RIO
US 62
Shooting Vest Skeet “Performance” royal blue Shooting Vest Trap “London” leather, navy
Shooting Vest Sporting “London” navy Shooting Vest Sporting “London” gold
63 ME
MO
MEMO
I. Scope mounts Scope mounts, carried out at the Krieghoff factory, will include sighting-in. On guns with more than one
barrel we guarantee a certain grouping of the barrels will be obtained. If scope mounts are fitted elsewhere an extra charge will be applied for sighting-in of the gun. Further, we cannot give any warranty for common point of impact accuracy on guns with multiple barrels. If the installation of the scope mount was not car-ried out by us we are not able to take any responsibility for the performance of grouping. Because of physical reasons, the point of impact (grouping of the barrels) on guns featuring multiple barrels can only be adjusted for one type of sight (rather open sight or scope). If nothing else was requested by the customer and the scope mount was done at the Krieghoff factory, we always sight-in guns featuring multiple barrels over the scope. If several scopes are being mounted, explicit information is required for which scope the grouping performance need to be obtained. If no information is being supplied, we will use the largest scope to ensure grouping accuracy.- The points mentioned above are also valid for insert barrels.
II. Model thermo stable If thermo stable models are ordered with cosmetic side ribs, we strongly recommended, for technical and
aesthetic reasons, that the scope mounting and sighting-in process is carried out at the Krieghoff factory.
III. Guarantee If scope installation is carried out by anyone other than Krieghoff and the barrels require subsequent reblue-
ing, all warranty regarding blueing and shooting accuracy will be void.
IV. Shooting accuracy The accuracy of the gun can only be guaranteed if the same type of ammunition is used as the gun was
sighted-in with. Therefore we recommend to acquire a sufficient stock of ammunition of the same loading used to sight-in your gun, especially if the gun has multiple rifled barrels. This applies to rifle cartridges as to shot gun slugs. In big bore double rifles semi jacketed bullets and full metal jacketed bullets are often being used side by side. Although this might be very useful, accuracy can only be guaranteed with one type of ammunition load. Test shots with a second load or even finding two loads that work together are only done on special request and have an additional time and ammunition charge.
V. Weight All specified weights, especially the total weights of weapons are to be understood as approximate infor-mation. Due to manufacturing and construction-related factors, as well as varying weights stem from the natural material of wood, there may be deviations. The weight data therefore only serves as a benchmark for better differentiation.
VA
RIO
US 64
N O T E S
VA
RIO
US
65
H. Krieghoff GmbH ∙ Hunting and Sporting ArmsBoschstrasse 22 ∙ 89079 Ulm ∙ Germany
Phone: +49 (0) 7 31 / 4 01 82-0 ∙ Fax: +49 (0) 7 31 / 4 01 [email protected] ∙ www.krieghoff.de