PRICE LIST Evolve Price List.pdfrubber bumpers dampen the noise of closing a drawer and stop any...
Transcript of PRICE LIST Evolve Price List.pdfrubber bumpers dampen the noise of closing a drawer and stop any...
EVOLVE FURNITURE GROUP 17 West Stow Rd, P.O. Box 562 Marlton, New Jersey 08053 T 856.552.4000 888.827.2500 F 856.552.4001 WWW.EVOLVEFURNITUREGROUP.COM
Evolve Furniture Group Showrooms:
Atlanta, Georgia
Charlotte, North Carolina
Chicago, Illinois
Cleveland, Ohio
Dallas, Texas
Detroit, Michigan
Elkridge, Maryland
Ft. Lauderdale, Florida
Glendale Heights, Illinois
Houston, Texas
Los Angeles, California
Minneapolis, Minnesota
New Orleans, Louisiana
New York City, New York
Philadelphia, Pennsylvania
Phoenix, Arizona
Seattle, Washington
Tampa, Florida
Washington, DC
Additional showrooms opening throughout 2007.
The Evolve System is Greenguard certifiedto rigorous indoor air quality standards forlow-emitting interior products.
Paper stock used in printing this brochurecontains post consumer recycled content.
FURNITURE FOR A SUSTAINABLE WORLDevolve furniture group
PRICE LISTEffective February 1, 2007A $25 net handling charge per shipmentwill be applied for non-UPS-able orders ofless than $2000 list.
PRICE LISTEVO
LVE FURN
ITURE G
ROU
PEffective February 1,2007
February 1, 2007 1
IntroductionFeatures & Benefits
Evolve Systems-Protecting the Environment for Future Generations
Our environmental success story began with the challenge to create an office system that would meet today’s business requirements while maintaining a firm commitment to save and protect the environment.
Sustainability became a part of the creative focus and development of Evolve that incorporates the latest technology and design features to provide excellent performance at a competitive price.
As government and industry environment ratings such as LEEDS & Greenguard become more prevalent, Evolve offers designers and architectsfunctional, attractive, and economical office designs that meet these standards.
Evolve is a leader in reducing waste in the manufacturing of its products as well as utilizing recycled materials wherever possible. We make extensive use of recycled plastic and wood waste from other Global factories.
Evolve is committed to the continuous improvement of our environmental systems, the prevention of pollution, and to complywith both the spirit and the letter of all relevant environmental legislation.
Evolve Panels are 100% recyclable at the end of their lifespan. Nothing from an Evolve panel needs to end up in a landfill.
Evolve Systems-Product Information
Evolve offers fabrics that are made from 100% recycled polyester, which means less waste going to landfills. These fabrics also reduced the demand for petroleum products, and decrease the environmental impacts of processing those petroleum products into polyester.
Evolve has developed a panel interior made from 100% recycled wood and polypropylene. Through innovative design and technology, Evolve utilizes waste that would have normally been sent to landfill.
Evolve Panels are insulated with Roxul, a mineral wood insulation made from slag (an inert steel by-product) and basalt rock. Roxul is a high density product that provides maximum sound absorption to reduce noise in the work environment. Roxul insulation is fire resistant, water repellent and will not support the growth of fungi or mildew.
Evolve’s epoxy powder coating process involves no liquids and is solvent free. It contains no harmful VOC’s or lead. Up to 99% of over sprayed powdered is reclaimed, mixed with virgin powder and reused. All powder that doesn’t get recirculated is recycled and used to paint non-exposed parts.
ISO 9001:2000 RegisteredCGSB #615-3
ISO 14001:2004 RegisteredCGSB #006b
February 1, 20072
IntroductionFeatures & Benefits
PANELS:
• Panel Fabric modules consist of Module Frames, Module Interiors andFabric Skins.
Module Construction
• Modules that are 12”H x 36” and 42”W are made of equal parts of 100%recylced polypropylene and 100% recycled wood (from Global’s factorywaste).
• Module Frames feature a combination of 100% recycled PVC horizontalextrusions and unique, molded vertical ends made from equal parts of100% recylced polypropylene and 100% recycled wood (from Global’s fac-tory waste).
• Module Interiors feature honeycomb made from 75% recycled kraft paperand acoustical mineral board derived from slag (inert steel by-product) andvolcanic material.
Fabric
• Fabric offerings include selections woven with 100% recycled yarn.
Panel Frame
• Panel Frame is made of cold rolled steel which has a recycled content of25%.
Metal Components/Raceway Finish
• All metal components are painted with environmentally friendly epoxypowder.
• Raceway interiors are coated with recycled epoxy powder.• The entire Evolve panel and the processes used to manufacture it are
designed to save and protect the environment. Evolve panels are madefrom recycled materials and are 100% recyclable.
Panel Options
• Factory installed Panel Modules are available in both 12” and 24” heightsand a variety of options including: Semi-Tackable Fabric Acoustic, Glazed,Open, Laminate and Whiteboard Modules.
• Standard Fabric Acoustic Panels come in a variety of heights: 30”, 42”, 54”and 66”. Monolithic Panels are available in 30”, 36”, 42”, 48”, 54”, and 66”.
• Panel Extension Modules attach to the top of the base structural panels.These are offered in 6”, 12” and 24” heights and can be stacked one on topof the other to create a visually continuous panel in excess of 14’-0” high.
• Panels can be modified on-site by swapping fabric modules for glazed,open, laminate, whiteboard modules, or other fabric modules at any timeafter the initial installation. Panels can also be altered in height by replac-ing the vertical liners (panel sides) and adding or subtracting modules asrequired.
• Panel widths come in 8 sizes including: 18”, 24”, 30”, 36”, 42”, 48”, 54”and 60”.
• All Fabric Modules are tackable.• One sided and two sided whiteboard modules are available.• Panels conform to CGSB and ANSI/BIFMA standards.• Evolve panels carry an acoustical rating of .65 NRC and 23 STC.• Rigid, steel panel frame is 2 7/8” thick.• Levelling glides extend 2 1/2”.• Evolve makes it easy to select a panel function that is suitable for your
application.• Evolve makes it easy to select a panel type and height that is suitable for
your application.• This “stack-on” feature makes private offices available with the use of
Panel Extension Modules combined with a door. When Panel ExtensionModules are used in the initial installation in conjunction with low panels(30” to 42”), future panel height flexibility is attained while maintainingstorage hang-on capabilities up to 66”.
• Panel frames can be totally disassembled in the field. Panel modules canbe reconfigured or replaced and panel heights altered as changing cir-cumstances demand.
• This means you do not have to purchase tackboards as each panel surfacebecomes a tackboard.
• Whiteboards incorporated into the panel remove the need for add-ons.• This is your assurance that the quality, and performance level of these
panels have been tested to equal or exceed the requirements of the USgovernment.
• Classified as acoustic, these panels meet the acoustical requirements ofboth Canadian and US governements.
• Solid steel panel frame combined with easy to assemble panel to panelclamps, create a rigid panel wall.
• Enables the client to deal with severe undulations in the flooring levels ofa building.
Voice/Data and Electrical Power:
• Voice/data cables can be laid in at both the base and the top of the panel.
• 8 wire, 4 circuit electrical capability, 2 utility + 2 dedicated circuits, eachwith 10 gauge (oversized) neutrals. All circuits are 20 amps (15 CSA).
• Additional 8 wire features. No tools required.• Both power and data is available at desk height.• Raceway Cover opening sizes conform to the ANSI/TIA/EIA Furniture
Opening Standard of 1.37 x 2.68.• Panels and electrical components are CSA/UL approved.• The base raceway cavity can accommodate 140 Category 5 data cables or
48 Category 5 data cables when the power distribution housings are pres-ent. In addition, 8 Category 5 data cables can be housed within a standardPanel Top Cap and 50 Category 5 cables can be accommodated in the option-al High Profile Top Cap. This is a “true lay-in” method whereby cables canbe run from the ceiling to worksurface without needing to be “fished”.
February 1, 2007 3
IntroductionFeatures & Benefits
• The Desk Top Data/Power House attaches to the back of the worksurfaceto provide access to two simplex power outlets and two voice/data out-lets.
• Standard Data Face Mount Plates can be used without the need of adapterplates (supplied by others).
• This is an extra safety feature for your office. • No tools are required to install electrical in the Evolve Panel System.
Worksurfaces:
• Worksurfaces come in a variety of shapes and sizes. Essentially, they are18”, 24” or 30” deep and are available in 6” increments from 24” to 72”wide. Custom tops are available at a modest upcharge and on the samedelivery schedule.
• Cable scoops located at the back of each worksurface provide routing ofpower and data cables.
• With this choice of product, we can tailor each installation to your require-ments. The addition of custom sizes shows a commitment to client satis-faction that not every manufacturer offers.
• This convenient feature, together with a 3/8” gap between the worksur-face and the panel, allows access to cables without having grommet holesin the worksurface.
• Metal inserts for the connection of supporting hardware.• Metal-to-metal connection ensures that, no matter how many times you
reconfigure your product, it will perform over the long term.• Thermally fused and high pressure laminate tops are available, both with
tough PVC edging.• All worksurfaces utilize balanced construction.• Whether thermally fused or high pressure, all worksurfaces are manufac-
tured with equal laminates on both sides of the worksurface to deterwarpage.
• Curved worksurfaces incorporate ergonomic design.• Highest quality, thermally fused laminated surfaces ensure lasting dura-
bility. High pressure laminates are also available for those areas whererugged use is expected. A 3mm PVC edgebanding is used on both options,to take the knocks of everyday wear and tear.
• Curved worksurfaces are ergonomically designed to facilitate the interac-tion between the keyboard, mouse and worksurface.
Storage:
• 19”, 24”, and 30” deep pedestals in 20 gauge steel. Freestanding,Worksurface Supporting, Mobile and Mobile with Cushion options avail-able.
• Metal roller bearing slides for all file drawers. Box drawers feature 75 lbsingle action slides, file drawer feature 150 lb full extension slides. Alldrawers have rubber bumpers to cushion the closing of each drawer.
• Drawer divider and pencil tray included in all pedestals containing boxdrawers.
• Adjustable glides are accessible from the inside of the cabinet.• Positive and secure locking system on all pedestals is standard.• Double wall drawer face with recessed handle.• Full height drawer sides on all file drawers.• 30” file drawers have full depth drawers with 26” of letter filing capacity.• Steel construction guarantees the performance of the product over the
long term. Welded joints with a full top, back and base ensure that thepedestal will sit square and adequately support the worksurface wherenecessary.
• The pencil tray is double width for extra storage.• Due to the quality of the construction and the slides, the pedestal drawers
will continue to operate efficiently for the lifetime of the furniture. Therubber bumpers dampen the noise of closing a drawer and stop any metal-to-metal contact.
• Worksurface supporting pedestals are standard with Evolve.• Available in 12” deep, flat front overhead and 13” deep full pull overhead.
Both have “up and over” doors.• Shelves feature all metal contruction.• Evolve Storage Towers feature all metal construction and a choice of 12
different configurations.• All storage components as well as the panel frames are epoxy powder
coated.• Glides enable you to level the cabinet to the floor and or worksurface. The
convenient adjustment feature allows the installer to adjust the height ofthe cabinet while it is under the worksurface. This saves time in theinstallation process.
• For additional security and piece of mind. These locks can be keyed alikeor master keyed for additional convenience.
• Quality construction with no exposed metal edges. Recessed handleoffers uncluttered aesthetic.
• This enables you to hang files from the drawer side so no extra hardwareis necessary. File drawers accept legal, letter and metric sized files.
• Storage Towers provide storage without pedestals or binder bins. Thisallows for greater flexibility in worksurface heights and increases the via-bility of 54” panels.
• “Environmentally friendly” epoxy powder coat is 15 times more durable inindependent testing than a wet paint spray. This helps maintain the lookof the product over its many years of service.
Warranties and Performance:
• Lifetime Warrantly.• Non Obsolescence Warranty.• Aggressive product pricing.• Reduced cost of assembly and reconfiguration.• ISO9001:2000 Registered.• ISO14001:2004 Registered.• GreenGuard Certified.
February 1, 20074
Introduction
• ANSI/BIFMA CGSB testing on all products.• For piece of mind over the long term, we cover you with a comprehensive
warranty that is supported by our dealer network.• Some installation companies claim that the Evolve System panels can be
installed in half the time it takes to install most of our competitor’s seg-mented panels. This cost saving can amount to thousands of dollars overthe lifetime of our furniture.
• Your assurance of consistent quality to an international standard. EvolveSystems is committed to design, manufacture and distribute superior qual-ity office furniture, which meets or exceeds the requirements of our cus-tomers.
• Confirmation that Evolve is committed (1) to providing product that,through their entire life cycle, minimize negative environmental impacts onthe environment, (2) to continuous improvement to our environmental sys-tems and programs and (3) to comply to all relevant environmental legis-lation and regulations.
• Evolve Systems meets LEED requirements for office furniture.• Evolve components are tested to the highest standard in the industry. This
is your assurance of quality and longevity.
February 1, 2007 5
Introduction Terms & Conditions
Application of Standard TermsSales of Evolve products are made only on Evolvestandard terms and conditions of sale which are con-tained in the Price Book and in Evolve's orderacknowledgments. These standard terms and condi-tions may be modified or supplemented only by aseparately written document signed by Evolve'sauthorized personnel at its head office in Marlton,New Jersey. An offer by Purchaser of said terms andconditions shall not be binding until accepted byEvolve in writing.
All illustrations, specifications and pricesin this Price List are based on the latest product infor-mation available at the time of publication. Evolvereserves the right to make changes, at any time andwithout prior notice, to prices, colors, materials,specifications and models offered.
Prices and PaymentThe prices shown in this Price List, as well as thosequoted by Evolve, shall be in US dollars for ordersshipped to destinations within the continental UnitedStates.
Prices listed herein are for standard product.Quotations for special product are available throughEvolve Customer Support Department in Marlton,New Jersey.
If shipping date requested is more than 90 days fromdate of order Evolve shall use published list priceseffective at the time of shipment.
Not included in the list price are special or exportpacking, unpacking and installation. Orders areinvoiced at the time of shipment. The Customeragrees to pay a charge of 2% per month of invoicesoutstanding more than 30 days.
For Payments only, mail to:Evolve Furniture Group, a division of:Global Industries, Inc.17 West Stow RoadP.O. Box 562Marlton, New Jersey 08053
Any products sold shall remain the property of Evolveuntil fully paid for in cash. The Purchaser agrees toperform all acts which may be necessary to perfectand assure retention of title to such products toEvolve until such time as the goods have been paidfor in full.
Freight charges will be prepaid by Evolve to destina-tions within the continental United States on all
orders of $10,000 list and greater, subject to the fol-lowing charges: For purchase orders of less than$10,000 at list, the freight charge will be 5% of thelist price of the order.
Evolve shall, in its sole discretion, determine themost appropriate method of shipment routing andcarrier. Shipments of less than a full trailer load (LTL)shall ship via common carrier. These LTL shipmentsare not subject to specific delivery days or times. Fulltrailer loads will provide for dedicated delivery timeand schedule. Purchaser may request special pack-aging or method of shipment at Purchaser's soleexpense.
TaxesAll sales, use, excise and other applicable taxes andthe collection and reporting thereof (excluding onlytaxes on the net income of Evolve) are thePurchaser's responsibility and will be invoiced to thePurchaser. If Purchaser claims an exemption fromsuch taxes, it shall be the Purchaser's responsibilityto furnish an appropriate exemption certificate toEvolve.
Order InformationEvolve requires that all orders be submitted inwriting to avoid errors and/or duplication. Orderswill be acknowledged with Evolve's acknowledge-ment forms governing the transaction. The detailsappearing on the acknowledgement will describe theitems to be shipped to Purchaser who must ascertainthat they are correct. If not correct, Purchaser shouldnotify Evolve immediately by telephone or fax fol-lowed by written confirmation. Acknowledgmentshows approximate shipping date of items ordered.Shipping dates are assigned to orders based onthe item having the longest manufacturing leadtime. Orders with Customer's Own Material(C.O.M.), or missing or incorrect information (finishselections, fabric selections, etc.) will be scheduledfor manufacturing upon receipt of COM or correctcomplete information. Purchaser must indicate ifmultiple shipping schedules are required includingnoting if the shipping date requested is longer thanstandard posted lead time. Each shipment will beinvoiced at time of shipping and will be subject topayment terms described herein.
C.O.M. Customer's Own MaterialShould Purchaser request a fabric, not standard tothe Evolve upholstery line, Purchaser shall submit asample of not less than two yards for approval.Evolve will determine whether fabric is suitable tomanufacturing process and applicable UL or coderequirements. Should Evolve be required to test such
fabric, it shall so advise Purchaser, and Purchasershall be responsible for all costs associated there-with.
Fabric yardage requirement will be determined byEvolve. An additional charge may be made to coverthe cost of cutting, matching or sewing unusual ordirectional patterns. Evolve shall have no responsib-lity for condition, quality, performance, physical prop-erties or any other aspect of C.O.M. For panels, priceas if grade 1 fabric is used.
Evolve reserves the right to reject any C.O.M.deemed unsuitable.Evolve reserves the right to cancel an order at anytime if C.O.M. is, in the sole judgement of Evolve,inadequate for any reason.
Changes and CancellationThe order may not be changed or cancelled byPurchaser without the written consent of Evolve.Standard items already in production are subject to aminimum 35% cancellation charge. This charge mayincrease to 100% based upon proximity to scheduledshipment date. Special order items and fabric-cov-ered items already in production are not subject tochange or cancellation under any circumstances.Fabric-covered items are considered to be in produc-tion once the fabric has been cut.
Deposit on Special OrdersOrders for nonstandard products may, at Evolve's dis-cretion, require deposit prior to scheduling of produc-tion, the amount of the deposit being creditedagainst the total price of the project.
SuspensionIn the event that the Purchaser defaults in the pay-ment of any sum due Evolve, or in the event thePurchaser's financial condition becomes unsatisfac-tory to Evolve, Evolve shall have the right at itsoption, upon written notice to the Purchaser, to can-cel shipment of any goods, unless within ten (10)days of Purchaser's receipt of such notice Purchaserprovides assurance of payment to Evolve in suchform, content and/or amounts as Evolve, in its solediscretion, deems adequate.
Combined ShipmentsEvolve will make every effort to combine shipmentsand orders on written request. However, acceptanceof such request shall be with Evolve's sole discretion.
February 1, 20076
Introduction Terms & Conditions
Code RestrictionsEvolve portable furniture may be subject to local fire,electrical and/or building codes applicable toportable furniture. It shall be Purchaser's soleresponsibility for the proper application of Evolveitems within the limitations of such local codes,which may be different from area to area.
ServiceService problems shall be handled by the authorizedEvolve dealer. Where this cannot be accomplished ona local level, service problems should be referred to:Evolve Furniture GroupCustomer Support, 17 West Stow RoadMarlton, New Jersey USA 08053856-552-4000 888-827-2500Attention: Evolve Operations Manager
StorageIn the event Purchaser requests postponement ofdelivery beyond the acknowledged shipping date,Evolve may transfer the goods to storage onPurchaser's account and at Purchaser's risk andexpense subject to a daily storage rate. Such transferto storage shall be deemed shipment to Purchaser forall purposes, including invoicing and payment.
DelaysEvolve's order acknowledgement will state a ship-ping date which is Evolve's best estimate at the timethe order is acknowledged. However, Evolve shallnot incur any obligation or liability to Purchaser forfailure to ship by a specified date. In addition, Evolveshall not be liable for any loss or damage resultingfrom any delay or failure in shipment or other failureto perform all or any part of the agreement betweenthe parties with respect to the goods shown on theface of the order acknowledgement where suchdelay, failure, loss or damage is the proximate resultof any act of any governmental authority or politicalsubdivision thereof, revolution, riot, civil disorder ordisturbance, act of enemies, delay or default in trans-portation, strike disputes among or between labourunions or other labour disputes, delay or inability inobtaining materials and facilities, fire, flood, act ofGod or any cause not within the reasonable controlof Evolve, whether of the class of causes enumerat-ed or otherwise. Without limiting the generality ofthe foregoing, Evolve may, without causing anybreach or incurring liability, allocate goods which arein short supply, regardless of the reasons therefore,among purchasers, in any manner which Evolve, in itssole discretion, deems advisable.
Back ChargesEvolve will not accept charges for expense incurredby the Purchaser in expediting shipments or other-wise. Evolve will not accept charges for the repair ofdamage by others.
ClaimsAll goods are sold F.O.B. Toronto, Canada, unless oth-erwise agreed to in writing by Evolve. Evolve is notresponsible for damage which occurs in transit or instorage. The carrier signs for all goods received ingood order. It is the Purchaser's responsibility toexamine goods upon receipt and to file any claimswith the carrier. Any claims made against Evolve forapparent defects, errors or shortages must be madeby the Purchaser in writing, within ten (10) workingdays after any delivery. Failure by the Purchaser tomake any claim against Evolve within the above-described ten days shall consititute acceptance ofthe goods and a waiver of any apparent defects,errors or shortages.
ReturnsNo returns of goods will be accepted without writtenconsent and shipping instructions, including Evolve'sReturn Goods Authorization (R.G.A.) numbers, toEvolve. A minimum restocking charge of 35% ismade on all authorized returns for credit or refund,provided goods are received by Evolve in the condi-tion in which they left the factory. No credit will begiven if goods cannot be reused. Special order itemsand fabric-covered items are in no event subject toreturn. All returns must be approved and authorizedin writing by Evolve Customer Support, Marlton, NewJersey.
Limited Lifetime WarrantyEvolve warrants its products to be free from defectsin material and workmanship for as long as the orig-inal customer owns the product or 25 years in thecase of a corporate purchaser. This warranty is madeby Evolve only to original customers acquiring theproduct directly from Evolve's authorized dealers. Thecustomer's remedy pursuant to this warranty is limit-ed to repair or replacement of parts or product atEvolve's option. Consent from Evolve must beobtained before any warranty work is performed.This warranty shall not apply to any products whichmust be replaced because of normal wear and tear,negligence, abuse or "accident", shipping damage, orproduct use and installation other than in accordancewith written instructions or warnings. It shall alsonot apply when product has been modified or altered,repaired or refurbished by someone other than Evolveor an authorized dealer or because of natural varia-
tions over which Evolve has no control. In the eventof repair and/or replacement of any defective prod-uct, Evolve does not warrant matching color, grain,texture or dye lots. This warranty does not cover thecost of transportation or labour. Evolve makes nowarranty that any of its products are suitable for anyparticular purpose and makes no other warranties,expressed or implied, other than those set forth inthis Price List. In no event shall Evolve be liable ineither tort or contract for any loss or direct, special,incidental, consequential or exemplary damages.
This Limited Lifetime Warranty is NOT applicable tocustomers who use Evolve products for rental pur-poses and is effective only for products, parts or com-ponents manufactured after October 1, 2000.
Evolve does not warrant color fastness onCustomer's Own Material.
Because of natural variations over which Evolve hasno control, this warranty does not extend to color,grain or texture of wood, and Evolve does not war-rant matching of color, grain or texture.
Evolve makes no warranties, including impliedwarranties of merchantability and fitness for aparticular purpose, other than the express war-ranties contained herein.
Limitation of RemedyPurchaser's sole and exclusive remedy (excluding therepair or relacement of goods for breach of theexpress warranty above) for any matter or claim aris-ing under or relating to these terms and conditions,the goods covered hereby and any transaction involv-ing or relating to such goods, whether in contract,tort (including negligence) or otherwise, shall be pay-ment of the lesser of the cost to repair or replace saidproduct or the purchase price for the goods to whichthe claim relates. In no event shall Evolve beliable for any special, indirect, consequential,or incidental damages, including without limi-tation, damages for loss of business profits,business interruptions, or loss of information.
E. and O.E.All quotations, acknowledgements and invoices aresubject to corrections for any errors and omissions.
February 1, 2007 7
IntroductionTable of Contents
INTRODUCTIONContents 2Coding an Order 10Fabric & Finish Listings 13Sample Configurations 18-40
PANELSPanel Tip – Components 41Panel Tip – Basic Evolve Panel Features 42Panel Summary 46Panel COM Form 47Panel Fabric Specification Sheet 48Panel Fabric Sample 49Fabric Acoustic Panel EVPFA 50Fabric Acoustic Panel – Premium EVPFP 50Fabric Acoustic Monolithic Panel EVPFAM 51Laminate Panel – one side EVPH1S 52Laminate Panel – two sides EVPH2S 52Write Board Panel – one side EVPF1W 53Write Board Panel – two sides EVPF2W 53Fabric Glazed Panel – Tempered Glass EVPFGT 54Fabric Glazed Panel – Premium – Tempered Glass EVPFPGT 54Fabric 12" Glazed Panel – Tempered Glass EVPFGTU 55Fabric 12" Glazed Panel – Premium – Tempered EVPFPGTU 55Monolithic 12" Glazed Panel – Tempered Glass EVPMGTU 56Fabric 36" Glazed Panel – Tempered Glass EVPFGTX 56Fully Glazed Mono Panel – Tempered Glass EVPXGT 57Fully Glazed Premium Panel – Tempered Glass EVPGPT 57Open Bottom Panel EVPFOL 58Open Bottom Panel – Premium EVPFPOL 58Fabric Open Panel – 12” Opening EVPFO 59Fabric Open Panel – Premium EVPFPO 59Fabric Open Panel – 24” Opening EVPFOX 60Mini Panel Kit EVMPK02 60Door Panel EVPDS 61Panel Tip – Panel Extension Module 62Panel Extension Module EVPFE 63Panel Extension Module – Premium EVPFPE 63Write Board Extension Module – one side EVPW1SE 64Write Board Extension Module – two sides EVPW2SE 64Laminate Extension Module – one side EVPH1SE 65Laminate Extension Module – two sides EVPH2SE 65Onen Panel Extension Module EVPOE 66Tempered Glass Panel Extension Module EVPGTE 67Tempered Glass Premium Panel Extension Module EVPGPTE 67Inline Panel Connector EVPIC 68Variable-Height Connector EVPVC 68End-of-Run Post Kit (Wall mountable) EVPER 68Inline Two-Way Post EVPIP2 68One-Way Post – End-of-Run EVPCP1 69Two-Way Corner Post EVPCP2 69Three-Way Corner Post EVPCP3 69Four-Way Corner Post EVPCP4 69Panel Tips - Connectors 70Two-Way Variable-Height Corner Post EVPVP2 71Three-Way Variable-Height Corner Post EVPVP3 71Four-Way Variable-Height Corner Post EVPVP4 71Inline Panel Extension Connector – Non-slotted EVPIEC 71Inline Panel Extension Connector – Slotted EVPIECS 72Inline Post Extension – Non-slotted EVPCEIP2 72One-Way Corner Post Extension - Slotted EVPCEPS1 72Inline Post Extension – Slotted EVPCEIPS2 72One-Way Corner Post Extension – Non-slotted EVPCEP1 72
Two-Way Corner Post Extension – Non-slotted EVPCEP2 72Two-Way Corner Post Extension – Slotted EVPCEPS2 73Three-Way Corner Post Extension – Non-slotted EVPCEP3 73Three-Way Corner Post Extension – Slotted EVPCEPS3 73Four-Way Corner Post Extension – Non-slotted EVPCEP4 73Four-Way Corner Post Extension – Slotted EVPCEPS4 74Vertical Flat Trim EVPVTF 74Vertical "L" Trim EVPVTL 74Panel Extension Trim EVPTE 74End-of-Run Trim – High Profile EVPHPT 75Upmount Extension Trim EVPUET 75Upmount End-of-Run Trim EVPUET 75Upmount End-of-Run Kit EVPUER 75End-of-Run Extension - Non Slotted EVPEER 76End-of-Run Extension - Slotted EVPEERS 76Vertical "U" Trim EVPVTU 76Panel Trim Variable-Height EVPTV 77High Profile End-of-Run Post Kit (Wall Mountable) EVPERHP 78High Profile Top Cap EVDHPT 78Inline High Profile Top Cap 2" High EVDICHP1 78One-Way High Profile Top Cap 2" High EVDCPHP1 78Two-Way High Profile Top Cap 2" High EVDCPHP2 79Three-Way High Profile Top Cap 2" High EVDCPHP3 79Four-Way High Profile Top Cap 2" High EVDCPHP4 79End-of-Run Post Kit - Aluminum EVPERA 80Upmount End-of-Run Post Kit - Aluminum EVPUERA 80One-Way Post - Aluminum Trim EVPCPA1 80Inline Two-Way Post - Aluminum Trim EVPIPA 80Two-Way Post - Aluminum Trim EVPCPA2 81Three-Way Post - Aluminum Trim EVPCPA3 81Two-Way Variable Height Corner Post - Aluminum Trim EVPVPA2 81Three-Way Variable Height Corner Post - Aluminum Trim EVPVPA3 81Four-Way Variable Height Corner Post - Aluminum Trim EVPVPA4 82End-of-Run Extension - Non-Slotted - Aluminum Trim EVPEERA 82End-of-Run Extension - Slotted - Aluminum Trim EVPEERSA 82One-Way Post Extension - Non-Slotted - Aluminum Trim EVPCEPA1 82One-Way Post Extension - Slotted - Aluminum Trim EVPCEPSA1 83Inline Post Extension - Non-Slotted - Aluminum Trim EVPCEIPA2 83Inline Post Extension - Slotted - Aluminum Trim EVPCEIPSA2 83Two-Way Post Extension - Non-Slotted - Aluminum Trim EVPCEPA2 83Two-Way Post Extension - Slotted - Aluminum Trim EVPCEPSA2 84Three-Way Post Extension - Non-Slotted - Aluminum Trim EVPCEPA3 84Three-Way Post Extension - Slotted - Aluminum Trim EVPCEPSA3 84Flat Trim - Aluminum EVPVTFA 85Flat Extension Trim - Aluminum EVPVTFEA 85Panel Trim - Variable Height - Aluminum EVPTVA 85End-of-Run Trim - Aluminum EVPERTA 85Panel Extension Trim - Aluminum EVPTEA 86Upmount Extention Trim - Aluminum EVPUETA 86Upmount End-of-Run Trim - Aluminum EVPUETA 86Panel Top Trim - Aluminum - Factory Installed EVPTTA 87Panel Top Trim - Aluminum - Field Installed EVPTTA_ _F 87Panel Top Notched Trim - Aluminum - Factory Installed EVPTNTA 87
February 1, 20078
Introduction Table of Contents
Panel Top Notched Trim - Aluminum - Field Installed EVPTNTA_ _F 87Panel Top Double Notched Trim - Aluminum - Factory Installed EVPTDNTA 88Panel Top Double Notched Trim - Aluminum - Field Installed EVPTDNTA_ _F 88
ELECTRICALElectrical Tip – Modified 8 Wire Electrical System 89Electrical Tip – Wire Schematic 90Electrical Tip – Definition of Components 91Electrical Tip – Step-by-Step Specification 92Electrical Tip – Components 93Power Distribution Housing EVE8PD 94Jumper Cable EVE8CP 94Pass-Through Cable EVE8CP 94“I” Connector EVE8CI-1 95Duplex Receptacle EVE8RD 95Reversible Floor Power Entry EVE8FR1 95Reversible Floor Power Entry EVE8FR2 95Ceiling Power Entry EVE8EC 96Hardwire Power Entry Box New York EVEENY-2&1 96Hardwire Junction Box Chicago EVEJBC-1 96Post Extension – Data/Comm Lay-In EVDPE 96Under Storage Task Light EVETL 97Variable Intensity Task Light EVETLV 97Chicago Task Lights EVETL 97Cord Cover EVECC 97Desktop Data/Power Receptacle EVEA 98ADAPT Power/Data Module EVEA 98Mini Adapt Power Modules EVEMA 99Mini Adapt Data Modules EVEMA 99Raceway Covers EVH8RC 100Raceway Opening Adapter EVH8RA 100Transition Jumper Cable EVE8CT 100
WORKSURFACESWorksurface Tips – Basic Features 101Worksurface Tips – Components 102Grain Direction 103Straight Worksurface EVWS 104Curvilinear Worksurface – Left EVWVL 104Curvilinear Worksurface – Right EVWVR 105Notched Worksurface – Left EVWNL 105Notched Worksurface – Right EVWNR 106Corner Curved Worksurface EVWCC 106Corner Worksurface with Curved Keyboard Support EVWCCK 107Corner Keyboard Worksurface EVWCK 107Five-Sided Worksurface EVWCF 107Extended Curved Corner – Left EVWCEL 108Extended Curved Corner – Right EVWCER 108"L" Worksurface EVWL 109Hatchet Worksurface EVWH 109"D" Worksurface EVWD 109Wedge Worksurface - Left EVWWL 110Wedge Worksurface - Right EVWWR 110“P” Top - Left EVWPTL 111“P” Top - Right EVWPTR 111120º Curved “D” Top - Left EVWCD6L 112120º Curved “D” Top - Right EVWCD6R 112Piano Top - Left EVWPL 113Piano Top - Right EVWPR 113Quarter Round Panel Worksurface EVWQR 114
Quarter Round Panel Corner Worksurface EVWQRC 114Worksurface Modesty Panel EVWMP 115Radius Worksurface EVWR 115Straight Transaction Surface EVWT 115Straight Transaction Surface with Cut-out EVWTV 116"L" Corner Transaction Surface EVWTCL 116"T" Corner Transaction Surface EVWTCT 116End Transaction Surface EVWTE 116End Transaction Surface with Cut-Out EVWTEV 117“D” Transaction Surface EVWTD 117End “D” Transaction Surface with Cut-Out EVWTDV 117Double “D” Transaction Surface EVWTDD 117Teardrop Pivoting Table EVTTP 118Teardrop Extension Table EVTTE 118End Panel EVHEP 118Support Leg EVHS 119Cantilever EVHC 119Monoleg EVHML 119Corner Brackets EVHCB 119Transaction Brackets EVHTB 119Flat Bracket EVHFB 120"Z" Bracket EVHZB 120Pedestal Bracket EVHPB 120Single Slotted Wall Track EVHV 120
FREESTANDING COMPONENTSLaminate Colors 121Five Sided Corner Chassis EVDFSC 122Retrun - Left EVDRL 123Return - Right EVDRR 123Bridge Chassis - Modesty EVDB 124Supported Return - Left EVDSRL 125Supported Return - Right EVDSRR 125Supported Bridge Chassis EVDSB 126Rectangular Desk Chassis EVDUD 127Extended Corner Chassis - Left EVDECCL 128Extended Corner Chassis - Right EVDECCR 128Conference Top Chassis - Left EVDCL 129Conference Top Chassis - Right EVDCR 129Hutch - Single Door EVDSHF 130Hutch - Double Door EVDSHF 130Modesty Inter-Connect Bracket EVDSCCR 131Panel Mount Bracket EVDHPMPR 131Corner Bracket EVHCBR 131End Panel “L” Bracket EVDHLB 131Mid Support Bracket EVDHMSB 132“Z” Bracket EVDHZ 132Flat Bracket EVHFB1 132Screw Pack EVDHSP1 132Corner Modesty Panel - Left EVDMPCL 133Corner Modesty Panel - Right EVDMPCR 133End Panel EVDEP 134Central Support Panel EVDCP 134Freestanding Tackboards EVDTB 134
STORAGEStorage Tips – Components 135Storage Tips – Interior Height, Width, Filing Capacity 136Storage Tips – Opening Capacity 138Storage Tips – Lateral File Features 139Storage Tips – Paint Colors 140Overhead Flipper Door Storage Unit - EVSOF 140Full Pull Overhead Flipper Door Storage Unit EVSOF 140
February 1, 2007 9
IntroductionTable of Contents
17" Overhead Flipper Door Storage Unit EVSOF 140Lock for Overhead Flipper Door Storage Unit EVSLK 140Overhead Flipper Door Storage Unit - Fully Assembled EVSOF 141International Overhead Back Wall EVSOIB 141Overhead Back Wall EVSOB 141Full Pull Overhead Back Wall EVSOFPB 141Box, File Pedestal EVSBF 144Box, Box, File Pedestal EVSBBF 142File, File Pedestal EVSFF 142Mobile Box, File Pedestal EVSBFM 143Mobile Box, Box, File Pedestal EVSBBFM 143Mobile File, File Pedestal EVSFFM 143Mobile Box, File Pedestal with Cushion EVSBFC 143Storage Tower (2 File) Four High EVST4H 144Storage Tower (2 File/1 Box) Four High EVST4H 144Storage Tower (2 File) Five High EVST5H2 144Storage Tower (2 Box/1 File) Five High EVST5H 145Storage Tower (3 File) Five High EVST5H 145Storage Tower (2 Box/2 File) Five High EVST5H 145Pencil Drawer EVSPD 146Low-Profile Shelf EVSSL 146High-Profile Shelf EVSOH 146Corner Shelf Kit EVSSC 146Two-high Lateral File EV92_P–2F1H 147Three-high Lateral File EV92_P–3F1H 147Four-high Lateral File EV92_P–4F1H 147Five-high Lateral File EV92_P–5F1H 147Two-high Storage Cabinet EV92_P–2S1_ 148Three-high Storage Cabinet EV92_P–3S1_ 148Four-high Storage Cabinet EV92_P–4S1_ 148Five-high Storage Cabinet EV92_P–5S1_ 148Five-high WardrobCabinet EV92_P–5W1 149Four-high Cabinet EV92_P–4MSL 149Five-high Cabinet EV92_P–5MSL 149Hanging File Bars EVSHFB 150Front-to-Back Bars EVSFBB 150Legal-to-Letter Adapter EVSLAB 150Divider Plates EVS_PD 150Pedestal Divider Plate EVAPDIV 151Lateral File Tops EVT 151Receding Door Conversion ERRC 152Fixed Drawer Conversion EFFD 152Half Height Drawers 92P-BHHD 152Posting Shelf 92PPS 152EDP Adapter EVSEDPS 153Counterweight Balance EVSCWB 153Additional & Master Keys EVS_ 153Evolve Key Alike Form 154
ACCESSORIESTack Board EVATB 155White Marker Board EVAWB 155Marker Tray EVAMT 155Half Width - Tack Board - Hutch EVDTB18-H 156Half Width - Ganging Load Bar - Hutch EVALB2-H 156Ganging Load Bar - Hutch EVALB2-4 156Overhead Divider - Hutch EVDSHD01 156Load Bar EVALB 157Load Bar - Top EVALB2 157Load Bar - Middle EVALB2-2 157Load Bar - Bottom EVALB2-3 157Overhead Divider EVSOFD 157
Binder Bin EVA011 158Letter Tray EVA012 158Slanted Sorter EVA013 158Media Bin EVA014 158Utility Tray EVA015 158Flip Sorter EVA016 158Name Plate EVANP 159Coat Hook EVACH 159Printer Slot EVWAPS 159Pencil Drawer EVSPD 159Easel EVAES 160Touch-Up Paint Kit EVATP 160CPU Holder EVCPU 161CRT Corner Plate EVWACP 161Adjustable Keyboard Clamp & Palm Rest EVWAK1 161Sit/Stand Adjustable Keyboard Tray & Mouse Tray EVWAK3A 161
SEATINGSeating Tips 163Seating Fabric Specification Sheet 165Seating Fabric Sample 166Arlington 167Tangier 167Peligro 170Chatham 172Zooey 173
INDEX 177
PRODUCT Code PagePRODUCT Code Page
February 1, 200710
Introduction
PRODUCT Code PagePRODUCT Code Page
IntroductionCoding an Order
Electrical
Example: Product: Pass-Through Cables
Specify: E V E C P Base Code found on the product page to the left of the product name and
a simple product illustration.
EV EVolve product line.
E Electrical category.
C Cable panel.
P Pass-through.
EVE8CP40 Product size offering – length. Listed on every product page with price
listing.
Note: Additional dimensions are provided for most products on the far
right hand side of each page. These dimensions are not required in the
ordering code.
Worksurfaces
Example: Product: Curvilinear Worksurface – Left
Specify: E V W V L Base Code found on the product page to the left of the product name and
a simple product illustration.
EV EVolve product line.
W Worksurface category.
V CurVilinear shape.
L Left hand configuration.
EVWVL3042 Worksurface size offering. Listed on every product page with price list-
ing.
Note: Additional dimensions are provided for most products on the far
right hand side of each page. These dimensions are not required in the
ordering code.
EVWVL3042–T890 Laminate code for surface. See the Fabric & Finish listing in this section.
EVWVL3042–T890–CR PVC code for trim. See the Fabric & Finish listing in this section.
1
2
1
2
3
4
February 1, 2007 11
PRODUCT Code PagePRODUCT Code Page
IntroductionCoding an Order
Worksurfaces – Hardware
Example: Product: End Panel
Specify: E V H E P Base Code found on the product page to the left of the product name and a
simple product illustration.
EV EVolve product line.
H Hardware category.
E End panel.
P End Panel.
EVHEP–T431 Laminte code for end panel. See the Fabric & Finish listing in this section.
Storage
Example: Product: Box, Box, File Pedestal
Specify: E V S B B F Base Code found on the product page to the left of the product name and a
simple product illustration.
EV EVolve product line.
S Storage category.
B Box drawer.
B Box drawer.
F File drawer.
EVSBBF–24 Pedestal depth in inches.
EVSBBF–24–LP Loop Pull handle style.
1
2
1
2
3
February 1, 200712
Introduction
PRODUCT Code PagePRODUCT Code Page
IntroductionCoding an Order
Accessories
Example: Product: White Marker Board
Specify: E V A W B Base Code found on the product page to the left of the product name and
a simple product illustration.
EV EVolve product line.
A Accessories category.
W White Marker Board.
B White Marker Board.
1
February 1, 2007 13
IntroductionFabric & Finish Listings
Laminates – Thermally FusedPlain LaminatesWillow Grey T431Storm T565Black T405New Oyster Grey T495Grey T551Constellation Java T823Taupe T427 Sahara Shell T889Cactus Star T890Desert Dusk T891Graphite Granite T899Desert Zephyr 4841-60LPCanyon Zephyr 4842-60LPLoden Zephyr 4844-60LPMisted Zephyr 4843-60LPDesigner White D354-60LPWhite Sand D403-60LPCafé Créme D456-60LPPlatinum D315-60LPPearl Bisque D485-07LPPearl Dust D488-07LPPearl Silver D487-07LPOxygen 4809-60LPTitanium 4810-60LPStudio White Matrix MR71TLPMaroochy Brush 4745-60LPIllawarra 4806-60LPWollamai Brush 4746-60LPPewter Brush 4779-60LPMontana Walnut 7110T-60LPBrighton Walnut 7922-07LPWidsor Mahogany 7039-60LPManitoba Maple 7911-60LPClear Maple WM8340TLPRiver Cherry 7937-38LPShaker Cherry 7935-07LPMonticello Maple 7925-38LP
Wood Grain Laminates
Avant Honey* T356Avant Cherry* T357Figured Mahogany T365Quartered Mahogany* T313Tiger Walnut* T819Tiger Maple* T820Tiger Fruitwood* T821Tiger Mahogany* T822Harvest Oak T818
Laminates – High PressurePlain LaminatesWillow Grey H431Storm H565Black H405New Oyster Grey H495Grey H551Constellation Java H823Taupe H427 Sahara Shell H889Cactus Star H890Desert Dusk H891Graphite Granite H899Desert Zephyr 4841-60HPCanyon Zephyr 4842-60HPLoden Zephyr 4844-60HPMisted Zephyr 4843-60HPDesigner White D354-60HPWhite Sand D403-60HPCafé Créme D456-60HPPlatinum D315-60HPPearl Bisque D485-07HPPearl Dust D488-07HPPearl Silver D487-07HPOxygen 4809-60HPTitanium 4810-60HPStudio White Matrix MR71THPMaroochy Brush 4745-60HPIllawarra 4806-60HPWollamai Brush 4746-60HPPewter Brush 4779-60HPMontana Walnut 7110T-60HPBrighton Walnut 7922-07HPWidsor Mahogany 7039-60HPManitoba Maple 7911-60HPClear Maple WM8340THPRiver Cherry 7937-38HPShaker Cherry 7935-07HPMonticello Maple 7925-38HP
Wood Grain Laminates
Avant Honey* H356Avant Cherry* H357Figured Mahogany H365Quartered Mahogany* H313Tiger Walnut* H819Tiger Maple* H820Tiger Fruitwood* H821Tiger Mahogany* H822Harvest Oak H818
Charcoal Grey CHRBlack BLKSilver SILTaupe TPETungsten TUN
PVC Edge Trim PVC Code Matching LaminateBlack BLK Black 1595-60HP/1595Charcoal CHR Storm HP565/LPS565Silver SIL New SilverTaupe TPE Hayden GreyAvant Honey AHE Avant HoneyAvant Cherry ACE Avant CherryDesigner White DWE Designer White D354Tungsten TUN Satin Stainless 4830
PVC Edge Trim PVC Code Matching LaminatePearl Dust PDE Pearl Dust D488Montana Walnut MTE Montana Walnut 7110TRiver Cherry RCE River Cherry 7937
February 1, 200714
IntroductionFabric & Finish Listings
Paint Colors (for application to trim, steel components, PVC, vertical and horizontal members)
Charcoal Grey CHRBlack BLKSilver SILTaupe TPETungsten TUN*
Panel Fabrics – Grade 1OasisAquifer OA11Fig OA13Palm OA14Citrus OA15Temple OA17Aqaba OA18Canyon OA19Nile OA20Delta OA23Groundwater OA24
CoordinateSand CN31Stone CN32Mint CN33Sky CN34Beige CN35Grey CN36Olive CN37
Blue CN38Cactus CN39Cinder CN40Sage CN41Brick CN42
SeasonsBeige SE40Pearl SE41Tan SE42Brown SE43Sky SE44Blue SE45Sea Green SE46Granite SE47Maple SE48Barley SE49Dark Violet SE50Kiwi SE52Currant SE53
CrepeSilver CR59Sea Green CR60Autumn CR61Harbor CR62Fields CR63Cream CR64Sunshine CR65Heather CR66Blue Sky CR67Sea Foam CR68Honey CR69
CharismaCornstalk CH90Pebble CH91Heather CH92Fields CH93Lime CH94Stone CH95
Harbor CH96Charcoal CH97Tourmaline CH98Bluestone CH99
Birdseye - 100% Recycled PolyesterOutlook BE21Rock BE22Vista BE23Soar BE24Impression BE25Glide BE26Panorama BE27Storm BE28Flight BE29Altitude BE30
*Subject to 10% up charge except on worksurface PVC trim. Additional paint and laminates may be available. Contact Evolve Customer Suppor for details.
Panel Fabrics– Grade 2TrafficMetal TR60Linen TR61Sable TR62Thunder TR63Horizon TR64Sierra Beige TR65Chalk Grey TR66Surf TR67Clay TR68Grass TR69Water TR70Topaz TR71Volcano TR72Storm TR73
February 1, 2007 15
IntroductionFabric & Finish Listings
Panel Fabrics – Grade 2100% Recycled
MeshCanyon B33ANapa Valley B34AHuntington B36AHuron B37AHeartland B39AOat B81APepper B82ALimestone B84ALagoon B85AZinc B86A
StreamShore ST50Pebble ST51Rapids ST52Eddy ST53Abyss ST54Chrystal ST55Sand ST56Tidal ST57Coral ST58Marsh ST59
CoastlineSand CL20Meringue CL21Gull CL22Limeade CL23Coral CL24Sunset CL25Beach Glass CL26Bluff CL27Blue Grass CL28Vapor CL29Dove CL30Seal CL31
ScribbleAgain VV20Contrary VV21About Face VV22Reverse VV23Opposite VV24Backwards VV25Separate VV26Divergent VV27Foil VV28Inverse VV29
CrosstownRay CT60Chamois CT61Buff CT62Sterling CT63Stucco CT64Fieldstone CT65Waterfront CT66Cement CT67Mystic CT68
GlazingTempered
Clear CLR
Smoked SMK
Frosted FRST
Note: Frosted option is available atan upcharge. Contact your EvolveCustomer Support Representativefor details.
February 1, 200716
IntroductionFabric & Finish Listings
Seating Fabrics– Grade 3
Aroma
Pewter AL01
Storm AL02
Indigo AL03
Pepper AL04
Copper AL05
Julep AL07
Emerald AL08
Dove AL09
Chateau
Burgundy CU01
Silverstone CU02
Navy Blue CU03
Forest Green CU04
Coal CU05
Metal CU06
Imagerie
Black IM06
Hunter Green IM07
Grey IM11
Navy Blue IM14
Spice IM28
Burgundy IM52
Jagged
Ruby JG01
Blue Heather JG02
Forest JG03
Putty JG04
Cobalt JG05
Storm JG06
Black JG07
Silver Grey JG08
Traditional Vinyl
Oxblood 557
Wedgewood Blue 564
Forest Green 568
Black 569
Seating Fabrics– Grade 4
Crescent
Cocoa 700
Pear 701
Silver 702
Oatmeal 703
Lemon 704
Flame 705
Stem 706
Ruby 709
Raven 789
Cobalt Blue 790
Cinder Grey 792
Pine 799
Arctic 800
Lyon
Spice LY10
Ash LY11
Emerald LY12
Alpine LY13
Red LY15
Sea LY16
Summer LY18
Moss LY20
Ebony LY23
Academy LY24
Putty LY25
Reef LY27
Wheat LY28
Renewal (Recycled Fabric)
Pewter RN30
Cork RN31
Cherry Fields RN32
Volcanic Ash RN33
Thunderstorm RN34
Blue Grass RN36
Leaf RN38
Melon RN39
Blue Berry RN40
Blue Bayou RN41
Tomato RN44
Amethyst RN45
Ochre RN47
Silhouette
Asphalt SL20
Acorn SL21
Indigo SL22
Shiraz SL23
Verdant SL24
Bronze SL25
Camel SL26
Jade SL27
Sienna SL28
Charcoal SL30
Claret SL32
Hunter SL35
Sapphire SL36
February 1, 2007 17
IntroductionFabric & Finish Listings
Seating Fabrics– Grade 5
Identity
Blue ID01
Plum ID02
Cypress ID03
Cobalt ID04
Poppy ID05
Lava ID06
Baltic ID08
Wheat ID11
Spring ID12
Peridot ID13
Garnet ID14
Paprika ID15
Espresso ID16
Seating Fabrics– Grade 6
Abbey
Shadow 867
Currant 868
Silverpine 875
Bayberry 876
Burgundy 878
Royal 879
Black 880
Grey 881
Emerald 883
Beige 884
Rose 885
Moonlight 889
Presidio
Saffron PR01
Light Grey PR02
Charcoal PR03
Loden PR04
Persian PR05
Mallard PR06
Thistle PR07
Campari PR08
Cranberry PR09
Eggplant PR10
Cobalt Blue PR11
Onyx PR12
Grade 7 - GenuineLeather/Mock Leather
Black 450/550
Chamois 459/559
Surf 470/570
Latte 471/571
Melon 472/572
Delta 473/573
Bronze 474/574
Rouge 475/575
Jade 476/576
Graphite 477/577
Chaps 478/578
Cabernet 479/579
Alpine 491/591
* Models upholstered in allGenuine Leather will be Grade 8
Grade 9 - Contract LeatherHavanna D530
Dark Brown D531
Sage D532
Taupe D533
Black D534
Mustard D535
Stone D536
Dark Green D537
Burgundy D538
Blue D539
Chestnut D540
Charcoal D541
Zooey Chair Mesh OptionsClay ZM61
Sail ZM66
Astro (standard) ZM69
Artifact ZM71
Lava ZM75
February 1, 200718
Introduction Sample Configurations
Sample #1
Quantity Code Description List Extended
2 EVPFA5424 54"x 24" Fabric Acoustic Panel 258 5162 EVPFA5436 54"x 36" Fabric Acoustic Panel 329 6582 EVPFA5442 54"x 42" Fabric Acoustic Panel 372 7442 EVPIC54 54" Inline Panel Connector 50 1002 EVPER54 54" End-of-Run Post Kit 67 1343 EVPCP254 54" Two-Way Corner Post 143 4291 EVWVL2442 24"x 42" Curvilinear Worksurface – left 158 1581 EVWVR2442 24"x 42" Curvilinear Worksurface – right 158 1581 EVWCK3618 36" x 18" Corner Keyboard Worksurface 293 2931 EVHC18L 18" Cantilever - Left 60 601 EVHC18R 18" Cantilever - Right 60 601 EVHCB2 Corner Bracket 15 172 EVHPB1 Pedestal Bracket 17 381 EVSBBF24LP Box,Box,File Pedestal – WS Supporting 404 4041 EVSFF24LP File,File Pedestal – WS Supporting 404 4042 EVSSL1242 42" Low-Profile Shelf 89 1781 EVWAK1 Adjustable Keyboard Clamp 219 219
Total $ 4,570
February 1, 2007 19
Introduction Sample Configurations
Sample #2
Quantity Code Description List Extended
2 EVPFAM5424 54"x 24" Fabric Acoustic Monolithic Panel 229 4582 EVPFAM5436 54"x 36" Fabric Acoustic Monolithic Panel 298 4582 EVPFAM5442 54"x 42" Fabric Acoustic Monolithic Panel 332 6642 EVPIC54 54" Inline Panel Connector 50 922 EVPER54 54" End-of-Run Post Kit 67 1343 EVPCP254 54" Two-Way Corner Post 143 4291 EVWVL2442 24"x 42" Curvilinear Worksurface – left 158 1581 EVWVR2442 24"x 42" Curvilinear Worksurface – right 158 1581 EVWCK3618 36" x 18" Corner Keyboard Worksurface 293 2931 EVHC18L 18" Cantilever - Left 60 601 EVHC18R 18" Cantilever - Right 60 601 EVHCB2 Corner Bracket 15 172 EVHPB1 Pedestal Bracket 17 381 EVSBBF24LP Box,Box,File Pedestal – WS Supporting 404 4041 EVSFF24LP File,File Pedestal – WS Supporting 404 4042 EVSSL1242 42" Low-Profile Shelf 89 1781 EVWAK1 Adjustable Keyboard Clamp 219 219
Total $ 4,224
February 1, 200720
Introduction Sample Configurations
Sample #3
Quantity Code Description List Extended
4 EVPFA4236 42”x 36” Fabric Acoustic Panel 290 1,160
4 EVPER42 42” End-of-Run Post Kit 56 224
1 EVPCP442 42” Four-Way Corner Post 182 182
4 EVWCK3618 36”x 18” Corner Keyboard Worksurface 293 1,172
4 EVWR18 18” Radius Worksurface 271 1,084
4 EVHC18L 18” Cantilever - Left 60 240
4 EVHC18R 18” Cantilever - Right 60 240
2 EVHCB2 Corner Bracket 15 34
4 EVWAK1 Adjustable Keyboard Clamp 219 876
Total $ 5,212
February 1, 2007 21
Introduction Sample Configurations
Sample #4
Quantity Code Description List Extended
4 EVPFAM4236 42”x 36” Fabric Acoustic Monolithic Panel 266 1,064
4 EVPER42 42” End-of-Run Post Kit 56 224
1 EVPCP442 42” Four-Way Corner Post 182 182
4 EVWCK3618 36”x 18” Corner Keyboard Worksurface 293 1,172
4 EVWR18 18” Radius Worksurface 271 1,084
4 EVHC18L 18” Cantilever - Left 60 240
4 EVHC18R 18” Cantilever - Right 60 240
2 EVHCB2 Corner Bracket 15 34
4 EVWAK1 Adjustable Keyboard Clamp 219 876
Total $ 5,116
February 1, 200722
Introduction Sample Configurations
Sample #5
Quantity Code Description List Extended
16 EVPFA6642 66”x 42” Fabric Acoustic Panel 469 7,5048 EVPIC66 66” Inline Panel Connector 56 4486 EVPER66 66” End-of-Run Post Kit 75 4502 EVPCP366 66” Thee-Way Corner Post 221 4421 EVPCP466 66” Four-Way Corner Post 258 2588 EVWS2442 24”x 42” Worksurface 132 1,0564 EVWCK4224 42”x 24” Corner Keyboard Worksurface 432 1,7284 EVHC24L 24” Cantilever - Left 69 2764 EVHC24R 24” Cantilever - Right 69 2762 EVHCB2 Corner Bracket 15 348 EVHPB1 Pedestal Bracket 17 1524 EVSBBF24LP Box, Box, File Pedestal — WS Supporting 404 1,6164 EVSFF24LP File, File Pedestal — WS Supporting 404 1,6164 EVSSL1242 42” Low-Profile Shelf 89 3564 EVSOF1242 42” Overhead Flipper Door Storage Unit 345 1,3804 EVSLK12 Lock for OH Storage Unit 32 1284 EVWAK1 Adjustable Keyboard Clamp 219 876
Total $ 18,148
February 1, 2007 23
Introduction Sample Configurations
Sample #6
Quantity Code Description List Extended
16 EVPFAM6642 66”x 42” Fabric Acoustic Monolithic Panel 418 6,6888 EVPIC66 66” Inline Panel Connector 56 4486 EVPER66 66” End-of-Run Post Kit 75 4502 EVPCP366 66” Thee-Way Corner Post 221 4421 EVPCP466 66” Four-Way Corner Post 258 2588 EVWS2442 24”x 42” Worksurface 132 1,0564 EVWCK4224 42”x 24” Corner Keyboard Worksurface 432 1,7284 EVHC24L 24” Cantilever - Left 69 2764 EVHC24R 24” Cantilever - Right 69 2762 EVHCB2 Corner Bracket 15 348 EVHPB1 Pedestal Bracket 17 1524 EVSBBF24LP Box, Box, File Pedestal — WS Supporting 404 1,6164 EVSFF24LP File, File Pedestal — WS Supporting 404 1,6164 EVSSL1242 42” Low-Profile Shelf 89 3564 EVSOF1242 42” Overhead Flipper Door Storage Unit 345 1,3804 EVSLK12 Lock for OH Storage Unit 32 1284 EVWAK1 Adjustable Keyboard Clamp 219 876
Total $ 17,780
February 1, 200724
Introduction Sample Configurations
Sample #7
Quantity Code Description List Extended
1 EVE8CP16 Jumper Cable, Panel-to-Panel 75 701 EVE8CP58 Pass-thru Cable, 58” long Male/Male 110 1101 EVE8FR1 Reversible Floor Power Entry 206 2064 EVE8PD36 36” Power Distribution Housing 129 5166 EVE8RD1 Duplex Receptacle, circuit 1 19 1266 EVE8RD2 Duplex Receptacle, circuit 2 19 1266 EVHC18L Cantilever, 18” deep - Left 60 3606 EVHC18R Cantilever, 18” deep - Right 60 3609 EVHCB2 Corner Bracket (pair) 15 1536 EVHPB1 Pedestal Bracket 17 1146 EVPCP242 2-way Post, 42” high 116 6962 EVPCP342 3-way Post, 42” high 154 3082 EVPCP442 4-way Post, 42” high 182 3648 EVPER42 End-of-Run Post Kit, 42” high 56 4486 EVPFA4224 42” Fabric Acoustic Panel, 24” wide 232 1,39222 EVPFA4236 42” Fabric Acoustic Panel, 36” wide 290 6,38011 EVPIC42 Connector, 42” high 45 4956 EVSBBF24LP B/B/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVSFF24LP F/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVWAK1 Adjustable Keyboard Clamp and palm rest 219 1,3146 EVWCK3618 Keyboard worksurface, 36”x18” (keyboard not included) 293 1,7586 EVWVL2436 Curved left worksurface, PVC edge trim, 18”x24”x36” 135 8106 EVWVR2436 Curved right worksurface, PVC edge trim, 18”x24”x36” 135 810
Total $ 21,664
February 1, 2007 25
Introduction Sample Configurations
Sample #8
Quantity Code Description List Extended
1 EVECC121 In-Line Wire Manager 18 201 EVE8CP16 Jumper Cable, Panel-to-Panel 75 751 EVE8CP58 Pass-thru Cable, 58” long Male/Male 110 1101 EVE8FR1 Reversible Floor Power Entry 206 2064 EVE8PD36 36” Power Distribution Housing 129 5166 EVE8RD1 Duplex Receptacle, circuit 1 19 1266 EVE8RD2 Duplex Receptacle, circuit 2 19 1266 EVETL24 Under Storage Task Lighting, 24” 176 1,0566 EVHC18L Cantilever, 18” deep - Left 60 3606 EVHC18R Cantilever, 18” deep - Right 60 3609 EVHCB2 Corner Bracket (pair) 15 1536 EVHPB1 Pedestal Bracket 17 1146 EVPCP266 2-way Post, 66” high 171 1,0262 EVPCP366 3-way Post, 66” high 221 4422 EVPCP466 4-way Post, 66” high 258 5168 EVPER66 End-of-Run Post Kit, 66” high 75 6006 EVPFA6624 66” Fabric Acoustic Panel, 24” wide 320 1,92022 EVPFA6636 66” Fabric Acoustic Panel, 36” wide 417 9,17411 EVPIC66 Connector, 66” high 56 6166 EVSBBF24LP B/B/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVSFF24LP F/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVWAK1 Adjustable Keyboard Clamp and palm rest 219 1,3146 EVWCK3618 Keyboard worksurface, 36”x18” (keyboard not included) 293 1,7586 EVWVL2436 Curved left worksurface, PVC edge trim, 18”x24”x36” 135 8106 EVWVR2436 Curved right worksurface, PVC edge trim, 18”x24”x36” 135 810
Total $ 27,056
February 1, 200726
Introduction Sample Configurations
Sample #9
Quantity Code Description List Extended
1 EVECC121 In-Line Wire Manager 18 201 EVE8CP16 Jumper Cable, Panel-to-Panel 75 751 EVE8CP58 Pass-thru Cable, 58” long Male/Male 110 1101 EVE8FR1 Reversible Floor Power Entry 206 2064 EVE8PD36 36” Power Distribution Housing 129 5166 EVE8RD1 Duplex Receptacle, circuit 1 19 1266 EVE8RD2 Duplex Receptacle, circuit 2 19 1266 EVETL24 Under Storage Task Lighting, 24” 176 1,0566 EVHC18L Cantilever, 18” deep - Left 60 3606 EVHC18R Cantilever, 18” deep - Right 60 3609 EVHCB2 Corner Bracket (pair) 15 1536 EVHPB1 Pedestal Bracket 17 1146 EVPCP266 2-way Post, 66” high 171 1,0262 EVPCP366 3-way Post, 66” high 221 4422 EVPCP466 4-way Post, 66” high 258 5168 EVPER66 End-of-Run Post Kit, 66” high 75 6006 EVPFAM6624 66” Fabric Acoustic Monolithic Panel, 24” wide 283 1,69822 EVPFAM6636 66” Fabric Acoustic Monolithic Panel, 36” wide 372 8,81411 EVPIC66 Connector, 66” high 56 6166 EVSBBF24LP B/B/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVSFF24LP F/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVWAK1 Adjustable Keyboard Clamp and palm rest 219 1,3146 EVWCK3618 Keyboard worksurface, 36”x18” (keyboard not included) 293 1,7586 EVWVL2436 Curved left worksurface, PVC edge trim, 18”x24”x36” 135 8106 EVWVR2436 Curved right worksurface, PVC edge trim, 18”x24”x36” 135 810
Total $ 26,474
February 1, 2007 27
Introduction Sample Configurations
Sample #10
Quantity Code Description List Extended
1 EVECC121 In-Line Wire Manager 18 201 EVE8CP16 Jumper Cable, Panel-to-Panel 75 751 EVE8CP58 Pass-thru Cable, 58” Long Male/Male 110 1101 EVE8FR1 Reversible Floor Power Entry 206 2064 EVE8PD36 36” Power Distribution Housing 129 5166 EVE8RD1 Duplex Receptacle, circuit 1 19 1266 EVE8RD2 Duplex Receptacle, circuit 2 19 1266 EVETL24 Under Storage Task Lighting, 24” 176 1,0566 EVHC18R Cantilever, 18” deep - Right 60 3606 EVHC18L Cantilever, 18” deep - Left 60 3603 EVHCB2 Corner Bracket (pair) 15 5112 EVHPB1 Pedestal Bracket 17 2286 EVPCP242 2-way Post, 42” high 116 6968 EVPER42 End-of-Rim Post Kit, 42” high 56 4486 EVPFA4224 42” Fabric Acoustic Panel, 24” wide 232 1,3928 EVPFA4236 42” Fabric Acoustic Panel, 36” wide 290 2,3208 EVPFA5436 54” Fabric Acoustic Panel, 36” wide 329 2,6326 EVPFA6636 66” Fabric Acoustic Panel, 36” wide 417 2,5023 EVPIC66 Connector, 66” high 56 1688 EVPTV12 12” Variable height End Trim 13 1128 EVPVC54 54” In-line Variable height Connector 52 4162 EVPVP366 3-way Variable height Connector, 66” high 221 4422 EVPVP466 4-way Variable height Connector, 66” high 258 5166 EVSBBF24LP B/B/F Ped, Freestanding or Worksurface Support, 24” d 404 2,4246 EVSFF24LP F/F Ped, Freestanding or Worksurface Support, 24” d 404 2,4246 EVSLK12 Lock for Flipper Door Storage 32 1926 EVSOF1236 Overhead Flipper Door Storage, 12” x 36” 314 1,8846 EVSSL1236 Low Profile Shelf, 12” x 36” 86 5166 EVWAK1 Adjustable Keyboard Clamp and Palm Rest 219 1,3146 EVWCK3618 Keyboard Worksurface, 36” x 18” (Keyboard not included) 293 1,7586 EVWVL2436 Curved left Worksurface, PVC edge trim, 18” x 24” x 36” 135 8106 EVWVR2436 Curved right Worksurface, PVC edge trim, 18” x 24” x 36” 135 810
Total $ 27,010
February 1, 200728
Introduction Sample Configurations
Sample #11
Quantity Code Description List Extended
1 EVECC121 In-Line Wire Manager 18 201 EVE8CP20 Jumper Cable, Panel-to-Post to Panel 87 872 EVE8CP46 Pass-thru Cable, 46” long Male/Male 100 2001 EVE8FR1 Reversible Floor Power Entry 206 2064 EVE8PD48 48” Power Distribution Housing 141 5646 EVE8RD1 Duplex Receptacle, circuit 1 19 1266 EVE8RD2 Duplex Receptacle, circuit 2 19 1266 EVETL18 Under Storage Task Lighting, 18” 161 9666 EVHC24L Cantilever, 24” deep - Left 69 4146 EVHC24R Cantilever, 24” deep - Right 69 4149 EVHCB2 Corner Bracket (pair) 15 1536 EVHPB1 Pedestal Bracket 17 1146 EVPCP266 2-way Post, 66” high 171 1,0262 EVPCP366 3-way Post, 66” high 221 4422 EVPCP466 4-way Post, 66” high 258 5168 EVPER66 End-of-Run Post Kit, 66” high 75 60017 EVPFA6624 66” Fabric Acoustic Panel, 24” wide 320 5,44011 EVPFA6648 66” Fabric Acoustic Panel, 48” wide 503 5,53311 EVPIC66 Connector, 66” high 56 6166 EVSBBF24LP B/B/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVSFF24LP F/F Ped, Freestanding or Worksurface supporting, 24” d 404 2,4246 EVSLK12 Lock for Flipper Door Storage 32 1926 EVSOF1224 Overhead Flipper Door Storage, 12” x 24” 273 1,6386 EVSSL1248 Low Profile Shelf, 12” x 48” 94 5646 EVWAK1 Adjustable Keyboard Clamp and palm rest 219 1,3146 EVWCK4824 Keyboard worksurface, 48”x 24” (keyboard not included) 527 3,16212 EVWS2424 Straight Worksurface, PVC edge trim, 24” x 24” 83 996
Total $ 30,277
February 1, 2007 29
Introduction Sample Configurations
Sample #12
Quantity Code Description List Extended1 EV9230P-2F1H 9200 Series Lateral File, 2-drawer, 30” Fixed 586 5861 EVE8C1 In-Line Wire Manager 158 1581 EVECC221 Corner Wire Manager 18 201 EVE8CP82 Pass-thru Cable, 82” long Male/Male 125 1252 EVE8PD36 36” Power Distribution Housing 129 2581 EVE8RD1 Duplex Receptacle, circuit 1 19 211 EVE8RD2 Duplex Receptacle, circuit 2 19 212 EVETL24 Under Storage Task Lighting, 24” 176 3521 EVHC18L Cantilever, 18” deep - Left 60 601 EVHC18R Cantilever, 18” deep - Right 60 601 EVHC24L Cantilever, 24” deep - Left 69 691 EVHC24R Cantilever, 24” deep - Right 69 691 EVHCB2 Corner Bracket (pair) 15 171 EVHEP2924 End Panel, 29” x 24” 156 1561 EVPCP266 2-way Post, 66” high 171 1711 EVPER42 End-of-Run Post Kit, 42” high 56 561 EVPER66 End-of-Run Post Kit, 66” high 75 751 EVPFA4236 42” Fabric Acoustic Panel, 36” wide 290 2902 EVPFA6636 66” Fabric Acoustic Panel, 36” wide 417 8341 EVPFP5424 54” Premium Fabric Acoustic Panel, 24” wide 294 2941 EVPFP6636 66” Premium Fabric Acoustic Panel, 36” wide 419 4191 EVPIC66 Connector, 66” high 56 562 EVPTV12 12” Variable Height End Trim 13 281 EVPVC54 54” In-line Variable Height Connector 52 521 EVPVC66 66” In-line Variable Height Connector 57 572 EVSLK12 Lock for Flipper Door Storage 32 322 EVSOF1236 Overhead Flipper Door Storage, 12” x 36” 314 6281 EVWAK1 Adjustable Keyboard Clamp and Palm Rest 219 2191 EVWCC3624 Curved Corner Worksurface, 36” x 24” 316 3161 EVWHR3672 Corner Hatchet Worksurface, 36” x 72” Right 677 6771 EVWS2436 Straight Worksurface, PVC Edge Trim, 24, x 36” 101 1011 EVWVL2424 Curved Left Worksurface, PVC Edge Trim, 18” x 24” x 24” 109 109
Total $ 6,386
February 1, 200730
Introduction Sample Configurations
Sample #13
Quantity Code Description List Extended
3 EVE8CP20 Jumper Cable, Panel-post-Panel 87 261
1 EVE8FR1 Reversible Floor Power Entry 206 206
1 EVE8PD24 24” Power Distribution Housing 91 91
3 EVE8PD48 48” Power Distribution Housing 141 423
6 EVE8RD1 Duplex Receptacle Unit, circuit 1 19 126
6 EVE8RDA/B Duplex Receptacle Unit, isolated circuit (A or B) 19 126
12 EVHCB2 Corner Bracket (pair) 15 204
2 EVPCP342 Three-Way Post, 42” high 154 308
2 EVPCP442 Four-Way Post, 42” high 182 364
8 EVPER42 End-of-Run Post Kit, 42” high 56 448
8 EVPFA4224 42” Fabric Acoustic Panel, 24, wide 232 1,856
3 EVPFA4248 42” Fabric Acoustic Panel, 48” wide 357 1,071
6 EVSBBF19LP Box, Box, File Pedestal 395 2,370
6 EVWS2448 Straight Worksurface, PVC edge trim, 24” x 48” 158 948
Total $ 8,802
February 1, 2007 31
Introduction Sample Configurations
Sample #14
Quantity Code Description List Extended
3 EVE8CP20 Jumper Cable, Panel-Post-Panel 87 261
1 EVE8FR1 Reversible Floor Power Entry 206 206
1 EVE8PD24 24” Power Distribution Housing 91 91
3 EVE8PD48 48” Power Distribution Housing 141 423
6 EVE8RD1 Duplex Receptacle, circuit 1 19 126
6 EVE8RDA/B Duplex Receptacle, isolated circuit (A or B) 19 126
12 EVHCB2 Corner Bracket (pair) 15 204
2 EVPCP366 Three-Way Post, 66” high 221 442
2 EVPCP466 Four-Way Post, 66” high 258 516
8 EVPER66 End-of-Run Post Kit, 66” high 75 600
8 EVPFA6624 66” Fabric Acoustic Panel, 24” wide 320 2,560
3 EVPFA6648 66” Fabric Acoustic Panel, 48” wide 503 1,509
6 EVSBBF19LP Box, Box, File Pedestal 395 2,370
6 EVSOF1248 Overhead Flipper Door Storage, 12” x 48” 376 2,256
6 EVWS2448 Straight Worksurface, PVC edge trim, 24” x 48” 158 948
Total $ 12,638
February 1, 200732
Introduction Sample Configurations
Sample #15
Quantity Code Description List Extended
3 EVE8CP20 Jumper Cable, Panel-Post-Panel 87 261
1 EVE8FR1 Reversible Floor Power Entry 206 206
1 EVE8PD24 24” Power Distribution Housing 91 91
3 EVE8PD48 48” Power Distribution Housing 141 423
6 EVE8RD1 Duplex Receptacle, circuit 1 19 126
6 EVE8RDA/B Duplex Receptacle, isolated circuit (A or B) 19 126
12 EVHCB2 Corner Bracket (pair) 15 204
2 EVPCP366 Three-Way Post, 66” high 221 442
2 EVPCP466 Four-Way Post, 66” high 258 516
8 EVPER66 End-of-Run Post Kit, 66” high 75 600
8 EVPFAM4224 Fabric Acoustic Monolithic Panel, 42” high x 24” wide 217 1,736
3 EVPFAM4248 Fabric Acoustic Monolithic Panel, 42” high x 24” wide 321 963
6 EVSBBF19LP Box, Box, File Pedestal 395 2,370
6 EVWS2448 Straight Worksurface, PVC edge trim, 24” x 48” 158 948
Total $ 9,012
February 1, 2007 33
Introduction Sample Configurations
Sample #16
Quantity Code Description List Extended
2 EVPFP5436 Premium Fabric Acoustic Panel, 54”h x 36”w 382 6722 EVPFP5442 Premium Fabric Acoustic Panel, 54”h x 42”w 432 7602 EVPFPGTU5424 Fabric Glazed Panel Tempered, 54”h x 24”w 403 7082 EVPIC54 Connector, 54”h 50 863 EVPCP254 Two-Way Post, 54”h 143 3752 EVPER54 End-of-Run Post Kit, 54”h 67 1161 EVWCK3618 Keyboard Worksurface, 36”w x 18”d 293 2331 EVWVL2442 Curved Left Worksurface, 24”d x 42”w 158 1451 EVWVR2442 Curved Right Worksurface, 24”d x 42”w 158 1451 EVHC18L Cantilever, 18” Left 60 531 EVHC18R Cantilever, 18” Right 60 531 EVHCB2 Corner Brackets, Left and Right (pair) 15 142 EVHPB1 Pedestal Bracket 17 321 EVSBBF24LP Worksurface Supporting B/B/F Pedestal, 24”d 404 3551 EVSFF24LP Worksurface Supporting F/F Pedestal, 24”d 404 3551 EVWAK1 Adjustable Keyboard Clamp and Palm Rest 219 192
Sub Total Pricing (without Electrical) $4,294
1 EVDPE84 Post Extension - Data/Comm Lay-in, 84”h 122 1071 EVE8RD1 Duplex Receptacle, Utility Circuit #1 19 181 EVE8RDA Duplex Recetacle, Dedicated Circuit #A 19 181 EVE8EC1 Ceiling Power Entry, 132”l 158 1391 EVE8PD36 Power Distribution Housing, 36”l 129 112
Total Pricing (all Inclusive) $4,688
February 1, 200734
Introduction Sample Configurations
Sample #17
Quantity Code Description List Extended
1 EVPFA4224 Fabric Acoustic Panel, 42”h x 24”w 232 2326 EVPFA4242 Fabric Acoustic Panel, 42”h x 42”w 331 1,9861 EVPIC42 Connector, 42”h 45 455 EVPCP242 Two-Way Post, 42”h 116 5802 EVPER42 End-of-Run Post Kit, 42”h 56 1125 EVWCC4224 Curved Corner Worksurface, 42”w x 24”d 427 2,0605 EVWQRC2424 1/4 Round Panel Corner Worksuface, 24”d 157 7851 EVWQRL2424 1/4 Round Panel Worksurface, Left, 24”d x 24”w 132 1321 EVWQRR2424 1/4 Round Panel Worksurface, Right, 24”d x 24 w 132 1321 EVWR24 Radius Worksurface, 24” 315 3152 EVWS2442 Worksurface, 24”d x 42”l 132 2647 EVHC24R Cantilever, 24” Right 69 4837 EVHC24L Cantilever, 24” Left 69 4834 EVHCB2 Corner Brackets, Left and Right (pair) 15 68
Total $7,677
February 1, 2007 35
Introduction Sample Configurations
Sample #18
Quantity Code Description List Extended
4 EVPFA6636 Fabric Acoustic Panel, 66”h x 36”w 417 1,4642 EVPFA6648 Fabric Acoustic Panel, 66”h x 42”w 503 8864 EVPFE2436 Panel Extension Module, 24”h x 36”w 161 5642 EVPFE2448 Panel Extension Module, 24”h x 48”w 194 3402 EVPFGT6636 Fabric Glazed Panel - Tempered Glass, 66”h x 36”w 567 9982 EVPGTE2436 Over Panel - Tempered Glass, 24”h x 36”w 360 7481 EVPDS9036R Door Panel, 90”h x 36”w 1617 1,4251 EVPDSL02 Lever Lock Set 91 802 EVPCEP224 Two-Way Corner Post Extension, 24”h 67 1162 EVPCP266 Two-Way Post, 66”h 171 2982 EVPEER24 End-of-Run Extension, 24”h 28 482 EVPER66 End-of-Run Post Kit, 66”h 75 1306 EVPIC66 Inline Connector, 66”h 56 2886 EVPIEC24 Panel Extensioin Connection, 24”h 25 1261 EVWHR3672 Corner Hatchet Worksurface, 36”d x 72”l 677 6181 EVWVL2448 Curved Left Worksurface, 24”d x 48”l 181 1661 EVHC18R Cantilever, 18”, Right 60 531 EVHCB2 Corner Brackets, Left and Right (pair) 15 141 EVHPB1 Pedestal Bracket 17 161 EVSBBF24LP Worksurface Supporting B/B/F Pedestal, 24”d 404 3551 EVSOF1248 Overhead Flipper Door Storage 376 3311 EVSLK12 Lock for Flipper Door Storage 32 281 EVSSL1236 Low Profile Shelf, 12”d x 36”l 86 751 EVWAK1 Adjustable Keybaord Clamp and Palm Rest 219 1921 EVETL24 Under Storage Task Lighting, 24”l 176 154
Total $9,513
February 1, 200736
Introduction Sample Configurations
Sample #19
Quantity Code Description List Extended
4 EVPH1S4236 Laminate Panel, One Side, 42”h x 36”w 450 1,800
2 EVPH1S4260 Laminate Panel, One Side, 42”h x 60”w 677 1,354
2 EVPCP242 Two-Way Post, 42”h 116 232
2 EVPER42 End-of-Run Post Kit, 42”h 56 112
3 EVPIC42 Connector, 42”h 45 135
1 EVWCEL362460 Extended Curved Corner, 24”w x 36”d x 60”l, Left 425 425
1 EVWCER362460 Extended Curved Corner, 24”w x 36”d x 60”l, Right 425 425
2 EVWS2436 Worksurface, 24”x 36”l 101 202
2 EVWT1548 Transaction Top, 15”d x 48”l 102 204
2 EVWT1560 Transaction Top, 15”d x 60”l 124 248
2 EVWTCL90 Transaction Top, 90o Corner, 21” x 21” 110 220
2 EVHC24R Cantilever, 24”d, Right 69 138
1 EVHC24L Cantilever, 24”d, Left 69 69
10 EVHFB1 Flat Brackets 9 100
9 EVHTB2 Transactiuon Brackets (pair) 15 153
1 EVSBBF24LP Worksurface Supporting B/B/F Pedestal, 24”d 404 404
1 EVSFF24LP Worksurface Supporting F/F Pedestal, 24”d 404 404
Total $6,625
February 1, 2007 37
Introduction Sample Configurations
Sample #20
Quantity Code Description List Extended
1 EVPFA5424 Fabric Acoustic Panel, 54”h x 24”w 258 2274 EVPFA5436 Fabric Acoustic Panel, 54”h x 36”w 329 1,1561 EVPCP254 Two-Way Post, 54”h 143 1251 EVPER54 End-of-Run Post Kit, 54”h 67 581 EVPIC54 Inline Connector, 54”h 50 432 EVPVC66 Inline Variable Connector, 66”h 57 981 EVPUER66 Upmount End-of-Run Kit, 66”h 83 722 EVPUET12 Upmount Extension Trim, 12”h 25 421 EVWCC3624 Curved Corner Worksurface, 36”w x 24”d 316 2511 EVWS2424 Worksurface, 24”d x 24”w 83 761 EVWS2472 Worksurface, 24”d x 72”w 227 2091 EVHC18R Cantilever, 18”d, Right 69 531 EVHC24R Cantilever, 24”d, Right 69 601 EVHC24L Cantilever, 24”d, Left 69 601 EVHCB2 Corner Brackets, Left and Right (pair) 15 142 EVHEP2924 End Panel, 29”h x 24”w 156 2742 EVSOF1236 Overhead Flipper Door Storage, 12”d x 36”w 314 5522 EVSOB36 Back Wall for EVSOF12 Overhead, 36”w 49 84
Total Pricing (all Inclusive) $3,454
February 1, 200738
Introduction Sample Configurations
Sample #21
Quantity Code Description List Extended
1 EVPFA5424 Fabric Acoustic Panel, 54”h x 24”w 258 2272 EVPFA5436 Fabric Acoustic Panel, 54”h x 36”w 329 5782 EVPFA6636S Fabric Acoustic Panel, 66”h x 36”w 417 7321 EVPCP254 Two-Way Post, 54”h 143 1251 EVPER54 End-of-Run Post Kit, 54”h 67 581 EVPER66 End-of-Run Post Kit, 66”h 75 651 EVPIC54 Inline Connector, 54”h 50 431 EVPIC66 Inline Connector, 66”h 56 481 EVPVC66 Inline Variable Connector, 66”h 57 494 EVPTV12 Flat Trim, Variable Height, 12”h 13 361 EVPUER66 Upmount End-of-Run Kit, 66”h 83 722 EVPUET12 Upmount Extension Trim, 12”h 25 421 EVWCC3624 Curved Corner Worksurface, 36”w x 24”d 316 2511 EVWS2424 Worksurface, 24”d x 24”w 83 761 EVWS2472 Worksurface, 24”d x 72”w 227 2091 EVHC18R Cantilever, 18”d, Right 60 531 EVHC24R Cantilever, 24”d, Right 69 601 EVHC24L Cantilever, 24”d, Left 69 601 EVHCB2 Corner Brackets, Left and Right (pair) 15 142 EVHEP2924 End Panel, 29”h x 24”w 156 2742 EVSOF1236 Overhead Flipper Door Storage, 12”d x 36”w 314 552
Total $3,510
February 1, 2007 39
Introduction Sample Configurations
Sample #22
Quantity Code Description List Extended
12 EVPFA6642 Fabric Acoustic Panel, 66”h x 42”w 469 4,9561 EVPCP366 Three-Way Post, 66”h 221 1941 EVPCP466 Four-Way Post, 66”h 258 2275 EVPER66 Inline Connector, 66”h 75 3256 EVPIC66 Inline Connector, 66”h 56 2884 EVWCK4224 Keybaord Worksurface, 42”w x 24”d 432 1,3728 EVWS2442 Worksurface, 24”d x 42”l 132 9684 EVHC24R Cantilever, 24”d, Right 69 2404 EVHC24L Cantilever, 24”d, Left 69 2402 EVHCB2 Corner Brackets, Left and Right (pair) 15 288 EVHPB1 Pedestal Bracket 17 1284 EVSBBF24LP Worksurface Supporting B/B/F Pedestal, 24”d 404 1,4204 EVSFF24LP Worksurface Supporting F/F Pedestal, 24”d 404 1,4204 EVSLK12 Lock for Flipper Door Storage 32 1124 EVSOF1242 Overhead Flipper Door Storage, 12”d x 42”w 345 1,2124 EVSSL1242 Low Profile Shelf, 12”d x 42”w 89 312
Sub Total Pricing (without Electrical) $13,442
4 EVE8RD1 Duplex Receptacle, Utility Circuit #1 19 724 EVE8RDB Duplex Receptacle, Dedicated Circuit #B 19 722 EVE8CP64 Pass-Through Cable, 64”l 115 2021 EV8FR1 Reversible Floor Power Entry, 72”l 206 1813 EVE8PD42 Power Distribution Housing, 42”l 132 348
Total Pricing (all Inclusive) $14,317
February 1, 200740
Introduction Sample Configurations
Sample #23
Quantity Code Description List Extended
12 EVPFAM6642 Fabric Acoustic Monolithic Panel, 66”h x 42”w 418 4,4161 EVPCP366 Three-Way Post, 66”h 221 1941 EVPCP466 Four-Wat Post, 66”h 258 2275 EVPER66 Inline Connector,66”h 75 3256 EVPIC66 Inline Connector, 66”h 56 2884 EVWCK4224 Keybaord Worksurface, 42”w x 24”d 432 1,3728 EVWS2442 Worksurface, 24”d x 42”l 132 9684 EVHC24R Cantilever, 24”d, Right 69 2404 EVHC24L Cantilever, 24”d, Left 69 2402 EVHCB2 Corner Brackets, Left and Right (pair) 15 288 EVHPB1 Pedestal Bracket 17 1284 EVSBBF24LP Worksurface Supporting B/B/F Pedestal, 24”d 404 1,4204 EVSFF24LP Worksurface Supporting F/F Pedestal, 24”d 404 1,4204 EVSLK12 Lock for Flipper Door Storage 32 1124 EVSOF1242 Overhead Slipper Door Storage, 12”d x 42”w 345 1,2124 EVSSL1242 Low Profile Shelf, 12”d x 42”w 89 312
Sub Total Pricing (without Electrical) $12,902
4 EVE8RD1 Duplex Receptacle, Utility Circuit #1 19 724 EVE8RDB Duplex Receptacle, Dedicated Circuit #B 19 722 EVE8CP64 Pass-Through Cable, 64”l 115 2021 EVE8FR1 Reversible Floor Power Entry, 72”l 206 1813 EVE8PD42 Power Distribution Housing, 42”l 132 348
Total Pricing (all Inclusive) $13,777
February 1, 2007 41
PanelsTechnical Information
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
The information listed below provides you with basic features of Evolve panels.
• Evolve segmented panels are available in five (5) basic heights: 30", 42", 54" and 66"; and eight (8) widths: 18", 24", 30" 36", 42", 48", 54” and 60".
• Evolve monolithic panels are available in five (5) basic heights: 30", 42", 48”, 54" and 66"; and eight (8) widths: 18", 24", 30" 36", 42", 48", 54” and 60".
• Evolve panels are 27/8" thick.
• The standard low profile top cap is included with the panel and allows for up to eight (8) CAT 5 data cables.
• Raceway will allow for 128 data cables without electrical, or 40 data cables with electrical.
• Post extension/data com lay in will allow for 40 data cables without electric and 20 data cables with electric.
• Raceway openings are 1.38” x 2.71”.
• Opposite sides of each module may have a different fabric within the same grade at no upcharge.
• If different grades of fabric are used on one panel, the entire panel must be priced at the highest grade.
• There is no panel creep in a straight panel-to-panel configuration; however, a corner post (2, 3, 4 way) will add 27/8 inches to a panel run.
• Stackability: Evolve panels can be increased in height in 6”, 12” or 24” increments. See Extension Module listings for part numbers.
• All Fabric Acoustic Panels (EVPFA) are composed of a 6" raceway module and a 24" base-height module which create the EVPFA30. Subsequentheights are created by adding either a 12" high module to create an EVPFA42 or a 24" high module to create an EVPFA54. The addition of both 12"and 24" modules creates a EVPFA66.
• In contrast, a premium panel (EVPFP) is composed of a 6" raceway module, a 24" base-height module and either two (2) or three (3) 12" modules whichmake up the two premium heights: EVPFP54 and EVPFP66.
• Acoustic Rating: 65 = NRC - Noise Reduction Coefficient
• STC: 23 = Sound Transmission Coefficient
• All panels available with PVC trim as a standard option.
• Aluminum trim available for additional cost. See aluminum trim listing for pricing and available options on page 83.
• Individual fabric covered acoustic modules incorporated into a rigid steel frame.
• If different grades of fabric are used on one panel, the entire panel must be priced at highest grade.
EXTENSION MODULES
• Panel Extension Modules attach to the top of a panel.• Modules can be stacked to add privacy or divide space.• Each side of a fabric module may have a different fabric within the same grade at no upcharge.• If different grades of fabric are used on one panel, the entire module must be priced at
highest grade.• Opposite side of each module may have a different fabric within the same grade at no upcharge.
February 1, 200742
PanelsTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
24"
12"
24"
EVPFA54EVPFA42EVPFA30
Fabric Acoustic Panel
6"
EVPFA66
EVPFAM66EVPFAM54EVPFAM42
Fabric Acoustic Monolithic Panel
24"
12"
EVPFP66EVPFP54
Fabric Acoustic Panel – Premium
6"
Fabric Acoustic
EVPH1S54EVPH1S42
Laminate Panel – one side
Laminate
EVPH2S66EVPH2S54EVPH2S42
Laminate Panel – two sides
12"
12"
24"
12"
EVPFP66
6"
24"
EVPH1S66
EVPFAM48EVPFA30
February 1, 2007 43
PanelsTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPF1W66EVPF1W54
Write Board Panel – one side
Write Board
EVPF2W66EVPF2W54
Write Board Panel – two sides
Partly Glazed
EVPFGT66EVPFGT54EVPFGT42
Fabric Glazed Panel – Tempered Glass
EVPFPGT66EVPFPGT54
Fabric Glazed Panel – Premium – Tempered Glass
WriteWrite
WriteWrite
EVPFGTU66
Fabric 12" Glazed Panel – Tempered Glass
EVPFPGTU66EVPFPGTU54
Fabric 12" Glazed Panel – Premium – Tempered Glass
February 1, 200744
PanelsTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Partly Glazed cont...
EVPMGTU66EVPMGTU54
Monolithic 12" Glazed Panel – Tempered Glass
EVPXGT66EVPXGT54EVPXGT42
Fully Glazed Mono Panel – Tempered Glass
EVPGPT66EVPGPT54EVPGPT42
Fully Glazed Premium Panel – Tempered Glass
EVPMGTU48
EVPXGT48
EVPFGTX6636
Fabric 36" Glazed Panel – Tempered Glass
Fully Glazed
February 1, 2007 45
PanelsTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFOL54EVPFOL42EVPFOL30
Open Bottom Panel
EVPFOL66 EVPFPOL66EVPFPOL54
Open Bottom Panel – Premium
Open
EVPFPO66
Fabric Open Panel – Premium
EVPFO66EVPFO54
Fabric Open Panel – 12" Opening
EVPFOX66EVPFOX54
Fabric Open Panel – 24" Opening
EVPDS90 EVPDS78
Door Panel – Solid
Doors
EVPFOX48
February 1, 200746
Many components make up a panel configuration. This page provides an exploded view of a sample configuration highlighting each panel componentrequired when specifying this configuration.
Components
A. EVPER66 End-of-Run Kit (Wall mount) E EVPVTL66 Vertical "L" TrimNote: adds 1" to the width of a panel run. Note: Can be purchased separately when required
for reconfiguration.
B. EVPFA6636 Fabric Acoustic Panel F. EVPVC66 Variable-Height ConnectorNote: there is no panel creep. Note: connector height must reference taller panel.
C. EVPIC66 Inline Panel Connector G. EVPTV24 Panel Trim Variable-Height
D. EVPCP266 Two-Way Corner Post H. EVPFA4236 Fabric Acoustic PanelNote: Trim kit included.Post Connectors can be custom manufacturedwith or without slots on one side only. Contactyour Evolve Customer Support Representativefor a special quote.
A
B
C
E
F
G
H
D
PanelsTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 47
PanelsPanel COM Request for Application Test
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Send completed form to:Evolve Furniture Group555 Petrolia RoadToronto, Ontario M3J2X8Attn: Anne-Sharkey Hedges
Requested By:
Phone #: Fax #:
Dealer/Specifier
Dealer Contact: Evolve CSR:
Phone #: Fax #:
Fabric Information
Fabric Manufacturer:
Color Name: Color #:
Pattern Name: Pattern #:
Content:
Weight: Width:
Repeat Horizontal: Repeat Vertical:
Other Comments:
Request for Application Test (this requires 2 yards of fabric)
_____ Evolve Panel _____ Evolve Tackboard
Total Number of yards for testing: __________
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
48
Panels Panel Fabric Specification SheetSend completed form to:EVOLVE Furniture Group 555 Petrolia Road Toronto, Ontario M3J2X8Attn: Anne-Sharkey Hedges
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
SUPPLIER
PATTERN
WIDTH
CONTENT
REMARKS:
LIGHT FASTNESS
FLAMMABILITY
TUNNER TEST
REMARKS:
CUT PRICE
1 - 3 ROLLS
4 ROLLS
REMARKS:
DIRECTIONAL
PANELS CORNERS
RACEWAY COVER
RACEWAY CORNERS
STRETCH
REMARKS: EASY HARD X-HARD
APPROVED ❏ NOT APPROVED ❏ CONDITIONAL APPROVAL ❏
REMARKS:
* This fabric is approved for upholsterability only. The approval does not account for the durability of the fabric at the time of, and after
installation of the product
Approval Signature: ____________________________________________________________________ Date: ___________________________
February 1, 2007 49
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
Panels Panel Fabric SampleSend completed form to:EVOLVE Furniture Group 555 Petrolia Road Toronto, Ontario M3J2X8Attn: Anne-Sharkey Hedges
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
TOP
STAPLEMINIMUM 6” X 6”
FABRIC SAMPLE HEREIN THE DIRECTION IT IS TO BE
APPLIED TO THE PRODUCT
BOTTOM
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
50
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsFabric Acoustic
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFA Fabric Acoustic Panel
• Individual fabric-covered acousticmodules incorporated into a solidsteel frame.
• Opposite sides of each module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPFA3018 198 207 30 18 27/8
EVPFA3024 206 217 30 24 27/8
EVPFA3030 229 242 30 30 27/8
EVPFA3036 248 264 30 36 27/8
EVPFA3042 266 284 30 42 27/8
EVPFA3048 294 314 30 48 27/8
EVPFA3054 318 340 30 54 27/8
EVPFA3060 341 366 30 60 27/8
EVPFA4218 219 231 42 18 27/8
EVPFA4224 232 249 42 24 27/8
EVPFA4230 270 290 42 30 27/8
EVPFA4236 290 314 42 36 27/8
EVPFA4242 331 357 42 42 27/8
EVPFA4248 357 387 42 48 27/8
EVPFA4254 395 428 42 54 27/8
EVPFA4260 434 471 42 60 27/8
EVPFA5418 236 253 54 18 27/8
EVPFA5424 258 280 54 24 27/8
EVPFA5430 295 321 54 30 27/8
EVPFA5436 329 360 54 36 27/8
EVPFA5442 372 407 54 42 27/8
EVPFA5448 415 455 54 48 27/8
EVPFA5454 449 493 54 54 27/8
EVPFA5460 482 531 54 60 27/8
EVPFA6618 298 319 66 18 27/8
EVPFA6624 320 347 66 24 27/8
EVPFA6630 355 385 66 30 27/8
EVPFA6636 417 456 66 36 27/8
EVPFA6642 469 513 66 42 27/8
EVPFA6648 503 553 66 48 27/8
EVPFA6654 547 602 66 54 27/8
EVPFA6660 592 649 66 60 27/8
EVPFP Fabric Acoustic Panel – Premium• Individual fabric-covered acoustic modules
incorporated into a solid steel frame.• Premium panels incorporate 12" high
acoustic modules above the 30" basesection.
• Opposite sides of each module may have adifferent fabric within the same grade at noupcharge.
• If different grades of fabric are used on onepanel, the entire panel must be priced athighest grade.
• A low profile top cap is included. It allowsfor storage of up to eight (8) Cat 5 datacables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPFP5418 277 294 54 18 27/8
EVPFP5424 294 316 54 24 27/8
EVPFP5430 324 350 54 30 27/8
EVPFP5436 382 413 54 36 27/8
EVPFP5442 432 468 54 42 27/8
EVPFP5448 461 501 54 48 27/8
EVPFP5454 491 535 54 54 27/8
EVPFP5460 519 568 54 60 27/8
EVPFP6618 348 369 66 18 27/8
EVPFP6624 362 390 66 24 27/8
EVPFP6630 395 428 66 30 27/8
EVPFP6636 419 458 66 36 27/8
EVPFP6642 499 543 66 42 27/8
EVPFP6648 546 596 66 48 27/8
EVPFP6654 584 639 66 54 27/8
EVPFP6660 619 680 66 60 27/8
EVPFAM Fabric Acoustic Monolithic Panel
• Monolithic fabric-covered acousticmodule incorporated into a solidsteel frame.
• Opposite sides of each panel mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Not available in laminate.
February 1, 2007 51
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsFabric Acoustic
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFAM4218 204 223 42 18 27/8
EVPFAM4224 217 240 42 24 27/8
EVPFAM4230 249 277 42 30 27/8
EVPFAM4236 266 298 42 36 27/8
EVPFAM4242 295 332 42 42 27/8
EVPFAM4248 321 363 42 48 27/8
EVPFAM4254 353 399 42 54 27/8
EVPFAM4260 382 433 42 60 27/8
EVPFAM4818 207 225 48 18 27/8
EVPFAM4824 227 250 48 24 27/8
EVPFAM4830 262 290 48 30 27/8
EVPFAM4836 286 318 48 36 27/8
EVPFAM4842 320 357 48 42 27/8
EVPFAM4848 347 385 48 48 27/8
EVPFAM4854 384 430 48 54 27/8
EVPFAM4860 418 465 48 60 27/8
EVPFAM5418 209 227 54 18 27/8
EVPFAM5424 229 252 54 24 27/8
EVPFAM5430 267 295 54 30 27/8
EVPFAM5436 298 330 54 36 27/8
EVPFAM5442 332 369 54 42 27/8
EVPFAM5448 361 403 54 48 27/8
EVPFAM5454 397 443 54 54 27/8
EVPFAM5460 435 485 54 60 27/8
EVPFAM6618 259 278 66 18 27/8
EVPFAM6624 283 306 66 24 27/8
EVPFAM6630 320 348 66 30 27/8
EVPFAM6636 372 404 66 36 27/8
EVPFAM6642 418 455 66 42 27/8
EVPFAM6648 453 495 66 48 27/8
EVPFAM6654 503 549 66 54 27/8
EVPFAM6660 554 605 66 60 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
52
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsLaminate
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPH1S Laminate Panel – one side
• Laminate faces on all modulesprovide durable, washable surfaceson one side of the panel.
• Available in high pressure laminateonly.
• The opposite side is fabric covered.• The fabric side of each module may
have a different fabric within thesame grade at no upcharge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• If applying Attribues Laminate1 Segment = 5% upchargemore than 1 = 10% upcharge
EVPH2S Laminate Panel – two sides
• Laminate faces on all modulesprovide durable, washable surfaceson both sides of the panel.
• Available in high pressure laminateonly.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• If applying Attribues Laminate1 Segment = 5% upchargemore than 1 = 10% upcharge
EVPH1S3018 237 242 30 18 27/8
EVPH1S3024 283 289 30 24 27/8
EVPH1S3030 331 336 30 30 27/8
EVPH1S3036 376 384 30 36 27/8
EVPH1S3042 426 435 30 42 27/8
EVPH1S3048 464 475 30 48 27/8
EVPH1S3054 513 525 30 54 27/8
EVPH1S3060 562 575 30 60 27/8
EVPH1S4218 281 288 42 18 27/8
EVPH1S4224 335 344 42 24 27/8
EVPH1S4230 393 403 42 30 27/8
EVPH1S4236 450 462 42 36 27/8
EVPH1S4242 511 525 42 42 27/8
EVPH1S4248 556 572 42 48 27/8
EVPH1S4254 617 634 42 54 27/8
EVPH1S4260 677 696 42 60 27/8
EVPH1S5418 330 337 54 18 27/8
EVPH1S5424 399 410 54 24 27/8
EVPH1S5430 467 481 54 30 27/8
EVPH1S5436 535 551 54 36 27/8
EVPH1S5442 607 625 54 42 27/8
EVPH1S5448 662 683 54 48 27/8
EVPH1S5454 737 760 54 54 27/8
EVPH1S5460 810 835 54 60 27/8
EVPH1S6618 409 420 66 18 27/8
EVPH1S6624 493 507 66 24 27/8
EVPH1S6630 576 593 66 30 27/8
EVPH1S6636 664 684 66 36 27/8
EVPH1S6642 756 779 66 42 27/8
EVPH1S6648 822 848 66 48 27/8
EVPH1S6654 915 943 66 54 27/8
EVPH1S6660 1008 1039 66 60 27/8
EVPH2S3018 323 30 18 27/8
EVPH2S3024 323 30 24 27/8
EVPH2S3030 381 30 30 27/8
EVPH2S3036 437 30 36 27/8
EVPH2S3042 497 30 42 27/8
EVPH2S3048 555 30 48 27/8
EVPH2S3054 615 30 54 27/8
EVPH2S3060 664 30 60 27/8
EVPH2S4218 314 42 18 27/8
EVPH2S4224 381 42 24 27/8
EVPH2S4230 449 42 30 27/8
EVPH2S4236 523 42 36 27/8
EVPH2S4242 596 42 42 27/8
EVPH2S4248 668 42 48 27/8
EVPH2S4254 735 42 54 27/8
EVPH2S4260 800 42 60 27/8
EVPH2S5418 368 54 18 27/8
EVPH2S5424 451 54 24 27/8
EVPH2S5430 534 54 30 27/8
EVPH2S5436 621 54 36 27/8
EVPH2S5442 710 54 42 27/8
EVPH2S5448 799 54 48 27/8
EVPH2S5454 879 54 54 27/8
EVPH2S5460 958 54 60 27/8
EVPH2S6618 464 66 18 27/8
EVPH2S6624 571 66 24 27/8
EVPH2S6630 677 66 30 27/8
EVPH2S6636 785 66 36 27/8
EVPH2S6642 899 66 42 27/8
EVPH2S6648 1008 66 48 27/8
EVPH2S6654 1113 66 54 27/8
EVPH2S6660 1217 66 60 27/8
EVPF1W Write Board Panel – one side
• Writing surface is built into the topmodule on one side of the panel,alleviating the need for a panel-mounted write board.
• Each side of each fabric module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPF2W Write Board Panel – two sides
• Writing surface is built into the topmodule on both sides of the panel,alleviating the need for a panel-mounted write board.
• Each side of each fabric module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
February 1, 2007 53
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsWrite Board
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPF1W5418 287 298 54 18 27/8
EVPF1W5424 357 374 54 24 27/8
EVPF1W5430 430 450 54 30 27/8
EVPF1W5436 477 501 54 36 27/8
EVPF1W5442 537 564 54 42 27/8
EVPF1W5448 606 636 54 48 27/8
EVPF1W5454 674 697 54 54 27/8
EVPF1W5460 742 779 54 60 27/8
EVPF1W6618 365 380 66 18 27/8
EVPF1W6624 450 472 66 24 27/8
EVPF1W6630 534 561 66 30 27/8
EVPF1W6636 595 626 66 36 27/8
EVPF1W6642 675 711 66 42 27/8
EVPF1W6648 753 793 66 48 27/8
EVPF1W6654 838 883 66 54 27/8
EVPF1W6660 924 973 66 60 27/8
EVPF2W5418 310 319 54 18 27/8
EVPF2W5424 389 400 54 24 27/8
EVPF2W5430 485 499 54 30 27/8
EVPF2W5436 526 542 54 36 27/8
EVPF2W5442 596 614 54 42 27/8
EVPF2W5448 698 719 54 48 27/8
EVPF2W5454 776 798 54 54 27/8
EVPF2W5460 855 880 54 60 27/8
EVPF2W6618 387 401 66 18 27/8
EVPF2W6624 481 498 66 24 27/8
EVPF2W6630 590 610 66 30 27/8
EVPF2W6636 646 670 66 36 27/8
EVPF2W6642 733 760 66 42 27/8
EVPF2W6648 842 872 66 48 27/8
EVPF2W6654 940 974 66 54 27/8
EVPF2W6660 1037 1074 66 60 27/8
Write
Write
Write
Write
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
54
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsPartly Glazed
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFGT Fabric Glazed Panel – Tempered Glass
• Individual fabric-covered acoustic module in lower position with glazedmodule in upper positionincorporated into a solid steel frame.
• Each side of the fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPFGT4218 264 273 42 18 27/8
EVPFGT4224 312 323 42 24 27/8
EVPFGT4230 353 366 42 30 27/8
EVPFGT4236 394 410 42 36 27/8
EVPFGT4242 440 458 42 42 27/8
EVPFGT4248 480 501 42 48 27/8
EVPFGT4254 537 560 42 54 27/8
EVPFGT4260 593 618 42 60 27/8
EVPFGT5418 292 301 54 18 27/8
EVPFGT5424 340 351 54 24 27/8
EVPFGT5430 394 408 54 30 27/8
EVPFGT5436 447 463 54 36 27/8
EVPFGT5442 501 519 54 42 27/8
EVPFGT5448 546 567 54 48 27/8
EVPFGT5454 633 656 54 54 27/8
EVPFGT5460 720 745 54 60 27/8
EVPFGT6618 371 384 66 18 27/8
EVPFGT6624 431 448 66 24 27/8
EVPFGT6630 498 518 66 30 27/8
EVPFGT6636 567 590 66 36 27/8
EVPFGT6642 639 666 66 42 27/8
EVPFGT6648 693 723 66 48 27/8
EVPFGT6654 798 832 66 54 27/8
EVPFGT6660 903 940 66 60 27/8
EVPFPGT Fabric Glazed Panel – Premium –Tempered Glass
• Individual fabric-covered acoustic module in lower position with glazedmodule in upper positionincorporated into a solid steel frame.
• Each side of the fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers..
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upcharge varies.Contact EVOLVE Customer Supportfor details.
EVPFPGT5418 353 362 54 18 27/8
EVPFPGT5424 421 432 54 24 27/8
EVPFPGT5430 473 487 54 30 27/8
EVPFPGT5436 526 542 54 36 27/8
EVPFPGT5442 586 605 54 42 27/8
EVPFPGT5448 645 665 54 48 27/8
EVPFPGT5454 721 744 54 54 27/8
EVPFPGT5460 796 821 54 60 27/8
EVPFPGT6618 441 451 66 18 27/8
EVPFPGT6624 532 544 66 24 27/8
EVPFPGT6630 595 609 66 30 27/8
EVPFPGT6636 657 674 66 36 27/8
EVPFPGT6642 733 752 66 42 27/8
EVPFPGT6648 808 829 66 48 27/8
EVPFPGT6654 914 937 66 54 27/8
EVPFPGT6660 1019 1045 66 60 27/8
February 1, 2007 55
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsPartly Glazed
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFGTU Fabric 12" Glazed Panel –Tempered Glass
• 12" glazed module in the topposition.
• Each side of each fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPFGTU6618 373 390 66 18 27/8
EVPFGTU6624 437 459 66 24 27/8
EVPFGTU6630 498 525 66 30 27/8
EVPFGTU6636 559 591 66 36 27/8
EVPFGTU6642 629 665 66 42 27/8
EVPFGTU6648 683 723 66 48 27/8
EVPFGTU6654 763 808 66 54 27/8
EVPFGTU6660 842 892 66 60 27/8
EVPFPGTU Fabric 12" Glazed Panel –Premium – Tempered Glass
• 12" glazed module in the topposition.
• Each side of each fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPFPGTU5418 343 356 54 18 27/8
EVPFPGTU5424 403 420 54 24 27/8
EVPFPGTU5430 457 477 54 30 27/8
EVPFPGTU5436 514 538 54 36 27/8
EVPFPGTU5442 577 604 54 42 27/8
EVPFPGTU5448 626 656 54 48 27/8
EVPFPGTU5454 702 736 54 54 27/8
EVPFPGTU5460 777 814 54 60 27/8
EVPFPGTU6618 421 438 66 18 27/8
EVPFPGTU6624 495 517 66 24 27/8
EVPFPGTU6630 562 589 66 30 27/8
EVPFPGTU6636 633 665 66 36 27/8
EVPFPGTU6642 715 751 66 42 27/8
EVPFPGTU6648 773 813 66 48 27/8
EVPFPGTU6654 867 912 66 54 27/8
EVPFPGTU6660 961 1010 66 60 27/8
EVPMGTU Monolithic 12" Glazed Panel –Tempered Glass
• 12" glazed module in the topposition.
• Each side of the fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
56
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsPartly Glazed
EVPMGTU4818 302 321 48 18 27/8
EVPMGTU4824 354 378 48 24 27/8
EVPMGTU4830 411 439 48 30 27/8
EVPMGTU4836 471 504 48 36 27/8
EVPMGTU4842 522 559 48 42 27/8
EVPMGTU4848 568 610 48 48 27/8
EVPMGTU4854 630 675 48 54 27/8
EVPMGTU4860 692 743 48 60 27/8
EVPMGTU5418 312 331 54 18 27/8
EVPMGTU5424 362 385 54 24 27/8
EVPMGTU5430 415 443 54 30 27/8
EVPMGTU5436 461 494 54 36 27/8
EVPMGTU5442 514 551 54 42 27/8
EVPMGTU5448 568 610 54 48 27/8
EVPMGTU5454 621 667 54 54 27/8
EVPMGTU5460 675 726 54 60 27/8
EVPMGTU6618 333 352 66 18 27/8
EVPMGTU6624 400 423 66 24 27/8
EVPMGTU6630 456 484 66 30 27/8
EVPMGTU6636 510 543 66 36 27/8
EVPMGTU6642 567 604 66 42 27/8
EVPMGTU6648 626 668 66 48 27/8
EVPMGTU6654 685 731 66 54 27/8
EVPMGTU6660 745 796 66 60 27/8
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFGTX Fabric 36" Glazed Panel –Tempered Glass
• 36" glazed module in the topposition.
• Each side of the fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPFGTX6618 428 437 66 18 27/8
EVPFGTX6624 475 486 66 24 27/8
EVPFGTX6630 550 564 66 30 27/8
EVPFGTX6636 625 641 66 36 27/8
EVPFGTX6642 700 718 66 42 27/8
EVPFGTX6648 766 786 66 48 27/8
EVPFGTX6654 842 863 66 54 27/8
EVPFGTX6660 919 944 66 60 27/8
EVPXGT Fully Glazed Mono Panel –Tempered Glass
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPXGT4218 283 42 18 27/8
EVPXGT4224 312 42 24 27/8
EVPXGT4230 362 42 30 27/8
EVPXGT4236 408 42 36 27/8
EVPXGT4242 455 42 42 27/8
EVPXGT4818 251 48 18 27/8
EVPXGT4824 323 48 24 27/8
EVPXGT4830 358 48 30 27/8
EVPXGT4836 441 48 36 27/8
EVPXGT4842 464 48 42 27/8
EVPXGT5418 314 54 18 27/8
EVPXGT5424 369 54 24 27/8
EVPXGT5430 427 54 30 27/8
EVPXGT5436 482 54 36 27/8
EVPXGT5442 535 54 42 27/8
EVPXGT6618 368 66 18 27/8
EVPXGT6624 425 66 24 27/8
EVPXGT6630 493 66 30 27/8
EVPXGT6636 554 66 36 27/8
EVPXGT6642 617 66 42 27/8
EVPGPT Fully Glazed Premium Panel –Tempered Glass
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPGPT4218 396 42 18 27/8
EVPGPT4224 484 42 24 27/8
EVPGPT4230 537 42 30 27/8
EVPGPT4236 586 42 36 27/8
EVPGPT4242 650 42 42 27/8
EVPGPT4248 723 42 48 27/8
EVPGPT4254 797 42 54 27/8
EVPGPT4260 869 42 60 27/8
EVPGPT5418 502 54 18 27/8
EVPGPT5424 617 54 24 27/8
EVPGPT5430 681 54 30 27/8
EVPGPT5436 743 54 36 27/8
EVPGPT5442 825 54 42 27/8
EVPGPT5448 920 54 48 27/8
EVPGPT5454 1014 54 54 27/8
EVPGPT5460 1106 54 60 27/8
EVPGPT6618 608 66 18 27/8
EVPGPT6624 747 66 24 27/8
EVPGPT6630 827 66 30 27/8
EVPGPT6636 900 66 36 27/8
EVPGPT6642 1000 66 42 27/8
EVPGPT6648 1114 66 48 27/8
EVPGPT6654 1229 66 54 27/8
EVPGPT6660 1343 66 60 27/8
February 1, 2007 57
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsFully Glazed
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
58
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsOpen
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFOL Open Bottom Panel
• The bottom module is completelyopen to provide maximum aircirculation and access to electricalor data panels.
• Each side of each fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPFOL3018 155 30 18 27/8
EVPFOL3024 176 30 24 27/8
EVPFOL3030 200 30 30 27/8
EVPFOL3036 220 30 36 27/8
EVPFOL3042 241 30 42 27/8
EVPFOL3048 261 30 48 27/8
EVPFOL3054 282 30 54 27/8
EVPFOL3060 302 30 60 27/8
EVPFOL4218 232 237 42 18 27/8
EVPFOL4224 267 273 42 24 27/8
EVPFOL4230 302 309 42 30 27/8
EVPFOL4236 340 348 42 36 27/8
EVPFOL4242 377 386 42 42 27/8
EVPFOL4248 406 417 42 48 27/8
EVPFOL4254 446 458 42 54 27/8
EVPFOL4260 484 497 42 60 27/8
EVPFOL5418 262 271 54 18 27/8
EVPFOL5424 300 311 54 24 27/8
EVPFOL5430 343 357 54 30 27/8
EVPFOL5436 385 401 54 36 27/8
EVPFOL5442 428 446 54 42 27/8
EVPFOL5448 464 484 54 48 27/8
EVPFOL5454 509 530 54 54 27/8
EVPFOL5460 552 577 54 60 27/8
EVPFOL6618 342 355 66 18 27/8
EVPFOL6624 393 410 66 24 27/8
EVPFOL6630 449 469 66 30 27/8
EVPFOL6636 504 527 66 36 27/8
EVPFOL6642 567 594 66 42 27/8
EVPFOL6648 608 638 66 48 27/8
EVPFOL6654 671 705 66 54 27/8
EVPFOL6660 733 770 66 60 27/8
EVPFPOL Open Bottom Panel – Premium
• The bottom module is completelyopen to provide maximum aircirculation and access to electricalor data panels.
• Each side of each fabric module mayhave a different fabric within thesame grade at no charge.
• If different grades of fabric are usedon one panel, the entire panel mustbe priced at highest grade.
• A low profile top cap is included. Itallows for storage of up to eight (8) Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPFPOL5418 310 319 54 18 27/8
EVPFPOL5424 357 369 54 24 27/8
EVPFPOL5430 407 421 54 30 27/8
EVPFPOL5436 458 474 54 36 27/8
EVPFPOL5442 515 533 54 42 27/8
EVPFPOL5448 553 574 54 48 27/8
EVPFPOL5454 609 632 54 54 27/8
EVPFPOL5460 667 692 54 60 27/8
EVPFPOL6618 389 402 66 18 27/8
EVPFPOL6624 450 467 66 24 27/8
EVPFPOL6630 512 533 66 30 27/8
EVPFPOL6636 578 601 66 36 27/8
EVPFPOL6642 652 679 66 42 27/8
EVPFPOL6648 699 729 66 48 27/8
EVPFPOL6654 775 809 66 54 27/8
EVPFPOL6660 850 887 66 60 27/8
EVPFO Fabric Open Panel – 12” Opening
• Individual fabric covered acousticmodules incorporated into a solidsteel frame.
• Opposite sides of each module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric areused on one panel, the entire panelmust be priced at highest price.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
EVPFPO Fabric Open Panel – Premium
• Individual fabric covered acousticmodules incorporated into a solidsteel frame.
• Opposite sides of each module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric areused on one panel, the entire panelmust be priced at highest price.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
February 1, 2007 59
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsOpen
EVPFO5418 315 328 54 18 27/8
EVPFO5424 366 383 54 24 27/8
EVPFO5430 422 442 54 30 27/8
EVPFO5436 480 504 54 36 27/8
EVPFO5442 541 568 54 42 27/8
EVPFO5448 584 614 54 48 27/8
EVPFO5454 647 680 54 54 27/8
EVPFO5460 709 746 54 60 27/8
EVPFO6618 347 364 66 18 27/8
EVPFO6624 401 423 66 24 27/8
EVPFO6630 462 489 66 30 27/8
EVPFO6636 526 558 66 36 27/8
EVPFO6642 592 628 66 42 27/8
EVPFO6648 640 680 66 48 27/8
EVPFO6654 710 753 66 54 27/8
EVPFO6660 776 826 66 60 27/8
EVPFPO6618 395 412 66 18 27/8
EVPFPO6624 458 480 66 24 27/8
EVPFPO6630 527 554 66 30 27/8
EVPFPO6636 596 626 66 36 27/8
EVPFPO6642 679 715 66 42 27/8
EVPFPO6648 730 770 66 48 27/8
EVPFPO6654 810 827 66 54 27/8
EVPFPO6660 892 941 66 60 27/8
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFOX Fabric Open Panel – 24” Opening
• Individual fabric covered acousticmodules incorporated into a solidsteel frame.
• Opposite sides of each module mayhave a different fabric within thesame grade at no upcharge.
• If different grades of fabric areused on one panel, the entire panelmust be priced at highest price.
• A low profile top cap is included. Itallows for storage of up to eight (8)Cat 5 data cables.
• Stackability: Evolve panels can beincreased in height in 6”, 12” or 24”increments. See Extension Modulelistings for part numbers.
• There is no panel creep.
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
60
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsOpen
EVPFOX5418 262 271 54 18 27/8
EVPFOX5424 300 311 54 24 27/8
EVPFOX5430 343 357 54 30 27/8
EVPFOX5436 385 401 54 36 27/8
EVPFOX5442 427 445 54 42 27/8
EVPFOX5448 462 483 54 48 27/8
EVPFOX5454 508 530 54 54 27/8
EVPFOX5460 552 577 54 60 27/8
EVPFOX6618 342 355 66 18 27/8
EVPFOX6624 393 410 66 24 27/8
EVPFOX6630 462 482 66 30 27/8
EVPFOX6636 504 527 66 36 27/8
EVPFOX6642 567 594 66 42 27/8
EVPFOX6648 608 638 66 48 27/8
EVPFOX6654 671 705 66 54 27/8
EVPFOX6660 733 770 66 60 27/8
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVMPK02 Mini Panel Kit
Evolve’s Mini Panel Kits are nowavailable to our dealers and their salesstaff. The Evolve mini panel is anexcellent sales tool featuring a cut awayof a module and samples of varioushardware and electrical components andconsists of the following:
• 1 EVPFP3024 20 x 24 Premium withcut-away
• 1 EVPCP232 Two-way corner post• 1 EVPER30 End of run trim kit• 1 EVDHPT24 High Profile Top Cap• 1 EVDCPHP2 Two-way High Profile Top Cap• 1 EVDPE4 Post Extension Lay in• 1 EVE8PD24 Power distribution
housing• 1 EVE8CP16 Jumper Cable• 1 EVE8RDA/B Duplex Receptacle• 1 Pizza cutter spline tool• 1 Replacement fabric• 1 Panel Bag with Evolve Logo• 1 Parts Bag with Evolve Logo
EVMPK02 448 30 24 27/8
Dealer Net Cost is $418 plus UPS ground freight.
February 1, 2007 61
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsDoors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPDS Door Panel - Solid
• All door surfaces are high pressurelaminate
• HP Laminate finish available in allstandard Evolve colors(see Price List page 9)
• Two panel widths: 36” or 42”• 78” Door Panel height = 66” high panel
plus one 12” Panel Extension Module• 90” Door Panel height = 66” high panel
plus one 24” or two 12” PanelExtension Modules
• Door can be specified left hand hungor right hand hung (see diagrambelow)
• Handedness of Door Panel can bechanged in the field
NOTE: Lock set sold separately.NOTE: Master key not available forknob or lever lock set.
EVPDS7836L 1558 78 36 27/8
EVPDS7836R 1558 78 36 27/8
EVPDS7842L 1805 78 42 27/8
EVPDS7842R 1805 78 42 27/8
EVPDS9036L 1617 90 36 27/8
EVPDS9036R 1617 90 36 27/8
EVPDS9042L 1869 90 42 27/8
EVPDS9042R 1869 90 42 27/8
Knob Lock Set EVPDSL01 64
Lever Lock Set EVPDSL02 91
Right Hand Hung
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
62
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Tip!!!
When ordering Panel Extension Modules, Inline Panel Extension Connectors (EVPIEC)must be ordered separately. Please see page 33 for details.
Inline Panel Extension Connectors connect two panel extension modules of equal heightin a straight run.
Extension connectors do not provide support for hang-onstorage components above 66”.
EVPIEC12
EVPFE Panel Extension Module
• Attaches on top of a panel.• Modules can be stacked to add privacy
or divide space. • Panel Extension Modules are not load
bearing if installed higher than 66".• Each side of the fabric module may
have a different fabric within the samegrade at no charge.
• If different grades of fabric are usedon one module, the entire module mustbe priced at highest grade.
• When ordering Panel ExtensionModules, Inline Panel ExtensionConnectors (EVPIEC) must be orderedseparately. Please see page 39 fordetails.
EVPFPE Panel Extension Module –Premium
• Attaches on top of a panel.• Modules can be stacked to add privacy
or to divide space. • Panel Extension Modules are not load
bearing above 66".• Each side of each module may have a
different fabric within the same gradeat no charge.
• If different grades of fabric are usedon the Panel Extension Module, themodule must be priced at highestgrade.
• When ordering Panel ExtensionModules, Inline Panel ExtensionConnectors (EVPIEC) must be orderedseparately. Please see page 39 fordetails.
February 1, 2007 63
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPFE0618 101 106 6 18 27/8
EVPFE0624 103 109 6 24 27/8
EVPFE0630 114 121 6 30 27/8
EVPFE0636 127 135 6 36 27/8
EVPFE0642 142 151 6 42 27/8
EVPFE0648 154 164 6 48 27/8
EVPFE0654 166 177 6 54 27/8
EVPFE0660 179 191 6 60 27/8
EVPFE1218 101 106 12 18 27/8
EVPFE1224 103 109 12 24 27/8
EVPFE1230 114 121 12 30 27/8
EVPFE1236 127 135 12 36 27/8
EVPFE1242 142 151 12 42 27/8
EVPFE1248 154 164 12 48 27/8
EVPFE1254 166 177 12 54 27/8
EVPFE1260 179 192 12 60 27/8
EVPFE2418 124 133 24 18 27/8
EVPFE2424 129 140 24 24 27/8
EVPFE2430 140 153 24 30 27/8
EVPFE2436 161 176 24 36 27/8
EVPFE2442 178 196 24 42 27/8
EVPFE2448 194 214 24 48 27/8
EVPFE2454 211 233 24 54 27/8
EVPFE2460 229 254 24 60 27/8
EVPFPE2418 168 176 24 18 27/8
EVPFPE2424 179 190 24 24 27/8
EVPFPE2430 201 215 24 30 27/8
EVPFPE2436 227 242 24 36 27/8
EVPFPE2442 255 273 24 42 27/8
EVPFPE2448 273 293 24 48 27/8
EVPFPE2454 302 324 24 54 27/8
EVPFPE2460 330 354 24 60 27/8
12" high
6" high
24" high
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
64
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPW1SE Write Board Extension Module –one side
• Attaches on top of a panel.• Provides writing surface on one side.• Modules can be stacked to add privacy
or to divide space.• Panel Extension Modules are not load
bearing above 66".• When ordering Panel Extension
Modules, Inline Panel ExtensionConnectors (EVPIEC) must be orderedseparately. Please see page 39 fordetails.
• High pressure only• If applying Attributes laminate upcharge
will be added. Contact customer servicefor details.
EVPW2SE Write Board Extension Module –two sides
• Attaches on top of a panel.• Provides writing surface on two sides.• Modules can be stacked to add privacy
or to divide space.• Panel Extension Modules are not load
bearing above 66".• When ordering Panel Extension
Modules, Inline Panel ExtensionConnectors (EVPIEC) must be orderedseparately. Please see page 39 fordetails.
• High pressure only• If applying Attributes laminate upcharge
will be added. Contact customer servicefor details.
EVPW1SE2418 151 156 24 18 27/8
EVPW1SE2424 172 178 24 24 27/8
EVPW1SE2430 192 199 24 30 27/8
EVPW1SE2436 226 234 24 36 27/8
EVPW1SE2442 253 262 24 42 27/8
EVPW1SE2448 279 289 24 48 27/8
EVPW1SE2454 303 314 24 54 27/8
EVPW1SE2460 327 340 24 60 27/8
EVPW2SE2418 182 24 18 27/8
EVPW2SE2424 214 24 24 27/8
EVPW2SE2430 246 24 30 27/8
EVPW2SE2436 290 24 36 27/8
EVPW2SE2442 327 24 42 27/8
EVPW2SE2448 365 24 48 27/8
EVPW2SE2454 404 24 54 27/8
EVPW2SE2460 441 24 60 27/8
February 1, 2007 65
DESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Laminate Extension Module —one side
• Attaches on top of a panel.• Laminate face on the module
provides a durable, washablesurface on one side of the panel.
• Modules can be stacked to addprivacy or to divide space.
• Panel Extension Modules are notload bearing above 66”.
• Available in high pressure only.• Additional upcharge for Attributes
laminate — 5% for one segment,10% for more than one.
EVPH1SE0618 140 143 6 18 27/8
EVPH1SE0624 162 168 6 18 27/8
EVPH1SE0630 183 187 6 18 27/8
EVPH1SE0636 208 212 6 18 27/8
EVPH1SE0642 235 240 6 18 27/8
EVPH1SE0648 257 263 6 18 27/8
EVPH1SE0654 290 296 6 18 27/8
EVPH1SE0660 304 311 6 18 27/8
EVPH1SE1218 140 143 12 18 27/8
EVPH1SE1224 162 168 12 18 27/8
EVPH1SE1230 183 187 12 18 27/8
EVPH1SE1236 208 212 12 18 27/8
EVPH1SE1242 235 240 12 18 27/8
EVPH1SE1248 257 263 12 18 27/8
EVPH1SE1254 290 296 12 18 27/8
EVPH1SE1260 304 311 12 18 27/8
EVPH1SE2418 187 192 24 18 27/8
EVPH1SE2424 221 227 24 18 27/8
EVPH1SE2430 255 262 24 18 27/8
EVPH1SE2436 292 300 24 18 27/8
EVPH1SE2442 329 338 24 18 27/8
EVPH1SE2448 361 372 24 18 27/8
EVPH1SE2454 392 403 24 18 27/8
EVPH1SE2460 431 444 24 18 27/8
Laminate Extension Module —two sides
• Attaches on top of a panel.• Laminate faces on both sides of the
module provide durable, washablesurfaces
• Modules can be stacked to addprivacy or to divide sapce.
• Panel Extension Modules are notload bearing above 66”
• Available in high pressure only.• Additional upcharge for Attributes
laminate — 10%
EVPH2SE0618 152 6 18 27/8
EVPH2SE0624 178 6 18 27/8
EVPH2SE0630 207 6 18 27/8
EVPH2SE0636 237 6 18 27/8
EVPH2SE0642 268 6 18 27/8
EVPH2SE0648 300 6 18 27/8
EVPH2SE0654 346 6 18 27/8
EVPH2SE0660 355 6 18 27/8
EVPH2SE1218 152 12 18 27/8
EVPH2SE1224 178 12 18 27/8
EVPH2SE1230 207 12 18 27/8
EVPH2SE1236 237 12 18 27/8
EVPH2SE1242 268 12 18 27/8
EVPH2SE1248 300 12 18 27/8
EVPH2SE1254 346 12 18 27/8
EVPH2SE1260 355 12 18 27/8
EVPH2SE2418 216 24 18 27/8
EVPH2SE2424 262 24 18 27/8
EVPH2SE2430 304 24 18 27/8
EVPH2SE2436 353 24 18 27/8
EVPH2SE2442 400 24 18 27/8
EVPH2SE2448 452 24 18 27/8
EVPH2SE2454 497 24 18 27/8
EVPH2SE2460 534 24 18 27/8
EVPH1SE
EVPH2SE
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W D
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
66
EVPOE Open Panel Extension Module
• Attaches to top portion of a panel.• Modules can be stacked to add
privacy or to divide space• Panel Extension Modules are not
load bearing above 66”.
EVPOE0618 160 6 18 27/8
EVPOE0624 164 6 24 27/8
EVPOE0630 201 6 30 27/8
EVPOE0636 210 6 36 27/8
EVPOE0642 256 6 42 27/8
EVPOE0648 288 6 48 27/8
EVPOE0654 314 6 54 27/8
EVPOE0660 340 6 60 27/8
EVPOE1218 161 12 18 27/8
EVPOE1224 165 12 24 27/8
EVPOE1230 201 12 30 27/8
EVPOE1236 210 12 36 27/8
EVPOE1242 256 12 42 27/8
EVPOE1248 288 12 48 27/8
EVPOE1254 314 12 54 27/8
EVPOE1260 340 12 60 27/8
EVPOE2418 241 24 18 27/8
EVPOE2424 239 24 24 27/8
EVPOE2430 256 24 30 27/8
EVPOE2436 280 24 36 27/8
EVPOE2442 316 24 42 27/8
EVPOE2448 356 24 48 27/8
EVPOE2454 386 24 54 27/8
EVPOE2460 417 24 60 27/8
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 67
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsExtension Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPGTE Tempered Glass PanelExtension Module
• Attaches on top of panel. • Can be stacked. • Panel Extension Modules are
designed or space division andadditional privacy only and are notload bearing above 66" high.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPGTE0618 198 6 18 27/8
EVPGTE0624 214 6 24 27/8
EVPGTE0630 258 6 30 27/8
EVPGTE0636 270 6 36 27/8
EVPGTE0642 330 6 42 27/8
EVPGTE0648 369 6 48 27/8
EVPGTE0654 403 6 54 27/8
EVPGTE0660 435 6 60 27/8
EVPGTE1218 198 12 18 27/8
EVPGTE1224 214 12 24 27/8
EVPGTE1230 258 12 30 27/8
EVPGTE1236 270 12 36 27/8
EVPGTE1242 330 12 42 27/8
EVPGTE1248 369 12 48 27/8
EVPGTE1254 403 12 54 27/8
EVPGTE1260 435 12 60 27/8
EVPGTE2418 299 24 18 27/8
EVPGTE2424 308 24 24 27/8
EVPGTE2430 329 24 30 27/8
EVPGTE2436 360 24 36 27/8
EVPGTE2442 408 24 42 27/8
EVPGTE2448 458 24 48 27/8
EVPGTE2454 497 24 54 27/8
EVPGTE2460 533 24 60 27/8
EVPGPTE Tempered Glass PremiumPanel Extension Module
• Attaches to top of a panel.• Panel Extension Modules are designed
for space division and additionalprivacy only and are not load bearingabove 66” high.
• Standard in clear (CLR) or smokedglass (SMK) as an option.
• Frosted Glass (FRST) upchargevaries. Contact EVOLVE CustomerSupport for details.
EVPGPTE2418 295 24 18 27/8
EVPGPTE2424 327 24 24 27/8
EVPGPTE2430 373 24 30 27/8
EVPGPTE2436 425 24 36 27/8
EVPGPTE2442 473 24 42 27/8
EVPGPTE2448 531 24 48 27/8
EVPGPTE2454 578 24 54 27/8
EVPGPTE2460 626 24 60 27/8
EVPIC Inline Panel Connector
• Used to connect two panels of equal heightin a straight run.
• Provides slotted support for worksurfacesand hang-on storage components.
• Connectors available without slots as aspecial at no upcharge. Contact CustomerSupport .
EVPIC30 40 30 2EVPIC42 45 42 2EVPIC48 48 48 2EVPIC54 50 54 2EVPIC66 56 66 2
EVPVC Variable-Height Connector
• Used to connect panels of differing heights in astraight run.
• Connector must reference taller panel.• Can be used for any variation of panel heights.• Provides slotted support for worksurfaces and
hang-on storage components.• Includes slotted post with levelling glide and
connection hardware.• Variable-height trim must be ordered
separately (see EVPTV listing).• Connectors available without slots as a special at
no upcharge. Contact Customer Support .
EVPVC42 50 42 2EVPVC48 51 48 2EVPVC54 52 54 2EVPVC66 57 66 2
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
68
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPER End-of-Run Post Kit (Wall mountable)
• Used at end of each panel run and can be usedto attach a panel run to a fixed wall.
• Adds 1" to the width of a panel run. • Provides slotted support for worksurfaces and
hang-on storage components.• Includes slotted post with levelling glide,
connection hardware and trim kit.• Can be attached to face of another panel to
provide off-modular panel connection.• Connectors available without slots as a special
at no upcharge. Contact Customer Support .
EVPER30 48 30 2EVPER42 56 42 2EVPER48 59 48 2EVPER54 67 54 2EVPER66 75 66 2
EVPIP2 Inline Two-Way Post
• Used to connect two panels of equal heightin a straight line in place of an EVPIC InlinePanel Connector.
• Adds 27/8" between adjoining panels.• Provides slotted support for worksurfaces
and hang-on storage components.• Includes corner extension post, one slotted
connector, attachment hardware and trim kit.• To be used with EVDPE Post Extension to
allow for ceiling entry at end of panel run.• Connectors available without slots as a special
at no upcharge. Contact Customer Support .
EVPIP230 91 30 4EVPIP242 114 42 4EVPIP248 125 48 4EVPIP254 135 54 4EVPIP266 162 66 4
February 1, 2007 69
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPCP1 One-Way Post – End-of-Run
• Used at the end of a run of panels inplace of an EVPER End-of-Run Post Kit.
• Adds 27/8" to the end of a run of panels.• Provides slotted support for worksurfaces
and hang-on storage components.• Includes corner extension post, one
slotted connector, attachment hardwareand trim kit.
• To be used with EVDPE Post Extension toallow for ceiling entry at end of panel run.
• Connectors available without slots as aspecial at no upcharge. Contact CustomerSupport .
EVPCP130 64 30 5EVPCP142 75 42 5EVPCP148 87 48 5EVPCP154 100 54 5EVPCP166 124 66 5
Two-Way Corner Post
• Attaches two panels of equal height in 90°configuration.
• Adds 27/8 ” to the width of a panel run.• Provides slotted support for worksurfaces
and hang-on storage components.• Includes corner post, two slotted connectors
with levelling glides, connecting hardwareand trim kit.
• Connectors available without slots as aspecial at no upcharge. Contact CustomerSupport .
EVPCP230 93 30 5EVPCP242 116 42 5EVPCP248 124 48 5EVPCP254 143 54 5EVPCP266 171 66 5
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
EVPCP2
Three-Way Corner Post
• Attaches three panels of equal height in a"T" configuration.
• Adds 27/8” to the width of a panel run.• Provides slotted support for worksurfaces
and hang-on storage components.• Includes corner post, three slotted
connectors with levelling glides,connecting hardware and trim kit.
• Connectors available without slots as aspecial at no upcharge. Contact CustomerSupport .
EVPCP330 115 30 5EVPCP342 154 42 5EVPCP348 171 48 5EVPCP354 187 54 5EVPCP366 221 66 5
EVPCP3
Four-Way Corner Post
• Attaches four panels of equal height in an"X" configuration.
• Adds 27/8” to the width of a panel run.• Provides slotted support for worksurfaces
and hang-on storage components.• Includes corner post, four slotted connectors
with levelling glides, connecting hardwaretop cap.
• Connectors available without slots as aspecial at no upcharge. Contact CustomerSupport .
EVPCP430 141 30 5EVPCP442 182 42 5EVPCP448 201 48 5EVPCP454 220 54 5EVPCP466 258 66 5
EVPCP4
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
70
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Fabric Acoustic Panel
A
B
A
B
C
D B
C
A
Slotted posts are included with each Variable-Height Corner Post. The height of eachslotted post must be specified when ordering a Variable-Height Corner Post. Slotted postheight is determined by the height of the connecting panel run.
Example
Step Specify base code listed on pricing page. EVPVP466
Step Specify slotted post 6 6 5 4heights.
Note: To specify height, use the first number of the connecting panel run heightdimension.
Note: Call EVOLVE Customer Support for 48” application.
Slotted Post Positions
As illustrated in the example below, start with position Aand continue clockwise specifying the height of eachslotted post.
Four-way
66" – Overall height of corner post
1
2
A B C D
66"54"
66" 42"
Sample Configuration – EVPVP466-6654
Tip!!!
February 1, 2007 71
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPVP3 Three-Way Variable-Height Post
• Attaches three panels of different height in a "T"configuration.
• Adds 27/8” to the width of a panel run.• Specify the corner post height that matches the
tallest panel attached to the post face. • Provides slotted support for worksurfaces and
hang-on storage components.• Includes corner post, three slotted connectors with
levelling glides, connecting hardware and trim kit.• Connectors available without slots as a special at
no upcharge. Contact Customer Support .
EVPVP342 154 42 5EVPVP348 171 48 5EVPVP354 187 54 5EVPVP366 221 66 5
Four-Way Variable-Height Post
• Attaches four panels of different height in a "X"configuration.
• Adds 27/8” to the width of a panel run.• Specify the corner post height that matches the
tallest panel attached to the post face. • Provides slotted support for worksurfaces and
hang-on storage components.• Includes corner post, four slotted connectors with
levelling glides, connecting hardware and trim kit.• Connectors available without slots as a special at
no upcharge. Contact Customer Support .
EVPVP442 182 42 5EVPVP448 201 48 5EVPVP454 220 54 5EVPVP466 258 66 5
EVPVP4
EVPIEC Inline Panel Extension Connector –Non-slotted
• Used to connect two panel extensionmodules of equal height in a straight run.
• Does not provide support for hang-onstorage components.
EVPIEC12 18 12 2EVPIEC24 25 24 2
EVPVP2 Two-Way Variable-Height Post
• Attaches two panels of different heights at acorner.
• Adds 27/8” to the width of a panel run.• Specify the corner post height that matches the
tallest panel attached to the post face. • Provides slotted support for worksurfaces and
hang-on storage components.• Includes corner post, two slotted connectors
with levelling glides, connecting hardware andtrim kit.
• Connectors available without slots as a specialat no upcharge. Contact Customer Support .
EVPVP242 116 42 4EVPVP248 130 48 4EVPVP254 143 54 4EVPVP266 171 66 4
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
72
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPCEP1EVPCEP2
One-Way Corner Post Extension –Non-slotted
• Attaches to corner post at the end of arun of panel extension modules
• Includes corner extension post, one non-slotted connectgor, attachmenthardware and trim kit
Two-Way Corner Post Extension –Non-slotted
• Used to connect two panel extensionmodules of equal height in a corner "L"configuration.
• Includes corner extension post, two non-slotted connectors, attachmenthardware, and trim kit.
EVPCEP106 37 12 4EVPCEP112 37 12 4EVPCEP124 50 24 4
EVPCEP206 40 12 4EVPCEP212 40 12 4EVPCEP224 67 24 4
EVPIECS Inline Panel Extension Connector –Slotted
• Used to connect two panel extensionmodules in a straight run.
• Provides slotted support up to 66" high forworksurfaces and hang-on storagecomponents.
EVPIECS06 25 6 2EVPIECS12 25 12 2EVPIECS24 30 24 2
EVPCEPS1EVPCEIPS2
One-Way Corner Post Extension –Slotted• Attaches to a corner post at the end of a
run of panel extension modules.• Provides slotted support up to 66” high,
for worksurfaces and hang-on storagecomponents.
• Includes corner extension post, oneslotted connector, attachment hardwareand trim kit.
Inline Post Extension – Slotted
• Attaches to a corner post and connectstwo panel extension modules in astraight line.
• Provides slotted support up to 66" high,for worksurfaces and hang-on storagecomponents.
• Includes corner extension post, twoslotted connectors, attachment hardwareand trim kit.
EVPCEIP2 Inline Post Extension – Non-slotted
• Attaches to a corner post and connectstwo panel extension modules in astraight line.
• Includes corner extension post, two non-slotted connectors, attachment hardwareand trim kit.
EVPCEIP206 44 12EVPCEIP212 44 12EVPCEIP224 69 24
EVPCEPS106 48 12EVPCEPS112 48 12EVPCEPS124 61 24
EVPCEIPS206 53 12EVPCEIPS212 53 12EVPCEIPS224 86 24
February 1, 2007 73
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPCEP3 Three-Way Corner Post Extension– Non-slotted
• Used to connect three panel extensionmodules of equal height in a corner "T"configuration.
• Includes corner extension post, threenon-slotted connectors, attachmenthardware, and trim kit.
EVPCEP306 47 6 5EVPCEP312 47 12 5EVPCEP324 76 24 5
EVPCEPS3 Three-Way Corner Post Extension– Slotted
• Used to connect three panel extensionmodules of equal height in a corner "T"configuration.
• Includes corner extension post, threeslotted connectors, attachmenthardware, and trim kit.
EVPCEPS306 60 6 5EVPCEPS312 60 12 5EVPCEPS324 95 24 5
EVPCEP4 Four-Way Corner Post Extension –Non-slotted
• Used to connect four panel extensionmodules of equal height in a corner "X"configuration.
• Includes corner extension post, four non-slotted connectors and attachmenthardware.
EVPCEP406 50 6 5EVPCEP412 50 12 5EVPCEP424 79 24 5
EVPCEPS2 Two-Way Corner Post Extension –Slotted
• Used to connect two panel extensionmodules of equal height in a corner "L"configuration.
• Includes corner extension post, twoslotted connectors, attachmenthardware, and trim kit.
EVPCEPS206 50 6 4EVPCEPS212 50 12 4EVPCEPS224 79 24 4
EVPVTF Vertical Flat Trim
• Used to finish the exposed face of a postconnecting three panels in a "T"configuration.
EVPVTF12 5 12 3EVPVTF24 6 24 3EVPVTF30 7 30 3EVPVTF36 8 36 3EVPVTF42 9 42 3EVPVTF48 11 48 3EVPVTF54 11 54 3EVPVTF66 13 66 3EVPVTF78 14 78 3EVPVTF90 15 90 3
EVPVTL Vertical "L" Trim
• Used to finish the two exposed faces ofa post connecting two panels at 90°.
* For aluminum application please seemodel EVPVTFA in Aluminum TrimSection
EVPVTL12 6 12 3EVPVTL24 13 24 3EVPVTL30 16 30 3EVPVTL36 18 36 3EVPVTL42 24 42 3EVPVTL48 27 48 3EVPVTL54 29 54 3EVPVTL66 34 66 3EVPVTL78 41 78 3EVPVTL90 49 90 3
EVPTE Panel Extension Trim
• Attaches to bottom of exposed end ofpanel to provide extension for End-of-Run Post Kit trim when using EVPFEPanel Extensions.
EVPTE06 9 6 3EVPTE12 11 12 3EVPTE24 23 24 3EVPTE36 32 36 3EVPTE42 34 42 3EVPTE48 35 48 3EVPTE54 36 54 3EVPTE66 40 66 3EVPTE78 60 78 3EVPTE90 64 90 3
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
74
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPCEPS4 Four-Way Corner Post Extension –Slotted
• Used to connect four panel extensionmodules of equal height in a corner "X"configuration.
• Includes corner extension post, fourslotted connectors and attachmenthardware.
EVPCEPS406 70 6 5EVPCEPS412 70 12 5EVPCEPS424 103 24 5
February 1, 2007 75
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPHPT End-of-Run Trim - High Profile
• Used in conjunction with the High Profile TopCap to give continuous finish trim at end ofpanel run. Does not include slotted post orconnection hardware.
• Available in PVC only
EVPHPT32 29 32 3EVPHPT44 40 44 3EVPHPT56 45 56 3EVPHPT68 50 68 3EVPHPT80 59 80 3EVPHPT92 69 92 3
EVPUET Upmount Extension Trim
• Attaches to the Upmount ExtensionConnector EVPUECS12 or to an InlineConnector EVPIC66 66” high.
• Used to finish the exposed UpmountExtension Connector on both sides.
• Priced in pairs.
EVPUET12 25 12 1
EVPUET Upmount End-of-Run Trim
• Replaces existing 66”h End-of-Run Trimonly.
• Comes with one Upmount Extension TrimEVPUET12 and one Upmount End-of-RunTrim.
EVPUET66 58 66 1
EVPUER Upmount End-of-Run Kit
• Replaces the standard End-of-Run Kit EVPER.• Used at the end of a panel run to support
worksurfaces and Upmount overheadstorage.
• Can attach a panel run to a fixed wall.• Adds 1” to the width of a panel run.• Includes slotted connector with leveling
glide, connection hardware, Upmount End-of-Run Trim EVPUET66 and one UpmountExtension Trim EVPUET12.
EVPUER66 83 66 1
EVPEER End-of-Run Extension — Non-slotted
• Used to extend an End-of-Run.• Does not provide support for hang-on
storage components.• Includes Inline Panel Extension
Connector (EVPIEC) and Panel ExtensionTrim (EVPTE).
EVPEER06 23 6 3EVPEER12 23 12 3EVPEER24 28 24 3
EVPEERS End-of-Run Extension — Slotted
• Used to extend an End-of-Run.• Provides slotted support up to 66” high
for worksurfaces and hang-on storagecomponents.
• Includes Inline Panel ExtensionConnector (EVPIEC) and Panel ExtensionTrim (EVPTE).
EVPEERS06 26 6 3EVPEERS12 26 12 3EVPEERS24 34 24 3
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
76
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 77
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsConnectors
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVPVTU Vertical "U" Trim
• Used to finish the three exposed faces ofa corner post positioned at the end of arun.
• or aluminum application see model #EVPVTFA in aluminum trim section.
EVPVTU12 8 12 3EVPVTU24 17 24 3EVPVTU30 23 30 3EVPVTU36 27 36 3EVPVTU42 30 42 3EVPVTU54 40 54 3EVPVTU66 44 66 3EVPVTU78 51 78 3EVPVTU90 58 90 3
EVPTV Panel Trim Variable-Height
• Attaches to the exposed end of the tallerpanel when two panels of differentheight meet in a straight run.
EVPTV06 9 6 3EVPTV12 13 12 3EVPTV24 24 24 3EVPTV30 28 30 3EVPTV36 34 36 3EVPTV42 39 42 3EVPTV48 42 48 3EVPTV54 44 54 3EVPTV66 49 66 3EVPTV78 53 78 3EVPTV90 58 90 3
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
78
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsData Management
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDICHP1 Inline High Profile Top Cap 2” High
• OPTIONAL High Continuous Trim. toorder High Profile continuous Flattrim (Three-Way) or “L” trim (Two-Way), add “HP” to the appropriatetrim Product Code found on pages 41& 42 of the Price List and add $2.00to the list price of the part.
• Available in standard trim colors.• Available in PVC only
EVDICHP1 17 27/8 27/8
EVDCPHP1 One-Way High Profile Top Cap 2” High
• OPTIONAL High Continuous Trim. toorder High Profile continuous Flattrim (Three-Way) or “L” trim (Two-Way), add “HP” to the appropriatetrim Product Code found on pages 41& 42 of the Price List and add $2.00to the list price of the part.
• Available in standard trim colors.• Available in PVC only
EVDCPHP1 17 27/8 27/8
EVDHPT High Profile Top Cap
• 2” high top cap provides a minimumstorage capacity of fifty (50) Cat 5data cables.
• Available in 18” – 60” lengths.• Field installed on top of same width
panel.• Available in standard trim colors.
EVDHPT18 15 2 27/8
EVDHPT24 19 2 27/8
EVDHPT30 26 2 27/8
EVDHPT36 30 2 27/8
EVDHPT42 36 2 27/8
EVDHPT48 41 2 27/8
EVDHPT54 45 2 27/8
EVDHPT60 49 2 27/8
High Profile End-of-Run Post Kit(Wall Mountable)
Replaces standard EVPER End-of-Run PostKit when using High Profile Post Caps
EVPERHP32 50 2EVPERHP44 58 2EVPERHP50 66 2EVPERHP56 69 2EVPERHP68 78 2
EVPERHP
February 1, 2007 79
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsData Management
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDCPHP4 Four-Way High Profile Top Cap2” High
• OPTIONAL High Continuous Trim. toorder High Profile continuous Flattrim (Three-Way) or “L” trim (Two-Way), add “HP” to the appropriatetrim Product Code found on pages 41& 42 of the Price List and add $2.00to the list price of the part.
• Available in standard trim colors.• Available in PVC only
EVDCPHP4 6 27/8 27/8
EVDCPHP2 Two-Way High Profile Top Cap2” High
• OPTIONAL High Continuous Trim. toorder High Profile continuous Flattrim (Three-Way) or “L” trim (Two-Way), add “HP” to the appropriatetrim Product Code found on pages 41& 42 of the Price List and add $2.00to the list price of the part.
• Available in standard trim colors.• Available in PVC only
EVDCPHP2 15 27/8 27/8
EVDCPHP3 Three-Way High Profile Top Cap2” High
• OPTIONAL High Continuous Trim. toorder High Profile continuous Flattrim (Three-Way) or “L” trim (Two-Way), add “HP” to the appropriatetrim Product Code found on pages 41& 42 of the Price List and add $2.00to the list price of the part.
• Available in standard trim colors.• Available in PVC only
EVDCPHP3 9 27/8 27/8
EVPERA End-of-Run Post Kit - Aluminum
• Wall Mount, Off-Module Connection• 10% upcharge for Tungsten
trim/paint
EVPERA30 52 30 27/8
EVPERA42 61 42 27/8
EVPERA48 66 48 27/8
EVPERA54 73 54 27/8
EVPERA66 82 66 27/8
EVPUERA Upmount End-of-Run Post Kit -Aluminum• 10% upcharge for Tungsten
trim/paint
EVPUERA66 90 66 27/8
EVPCPA1 One-Way Post - Aluminum Trim
• Used at the end of a run of panel inplace of an EVPER.
• Provides slotted support forworksurfaces and hang on storagecomponents
• Includes corner post, 1 slottedconnector, attachment hardware and3 EVPVTFA 66”h.
• 10% upcharge for Tungstentrim/paint
EVPCPA130 68 30 27/8
EVPCPA142 79 42 27/8
EVPCPA148 91 48 27/8
EVPCPA154 104 54 27/8
EVPCPA166 130 66 27/8
EVPIPA Inline Two-Way Post - AluminumTrim
• Includes corner post, 2 slottedconnectors, attachment hardwareand 2 EVPVTFA Aluminum Trims.
• 10% upcharge for Tungstentrim/paint
EVPIPA230 107 30 27/8
EVPIPA242 134 42 27/8
EVPIPA248 142 48 27/8
EVPIPA254 164 54 27/8
EVPIPA266 195 66 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
80
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H WDESCRIPTION
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 81
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Two-Way Post - Aluminum Trim
• Includes corner post, 2 slottedconnectors, attachment hardwareand 2 EVPVPFA Aluminum Trims.
• 10% upcharge for Tungstentrim/paint
EVPCPA230 106 30 27/8
EVPCPA242 133 42 27/8
EVPCPA248 143 48 27/8
EVPCPA254 164 54 27/8
EVPCPA266 195 66 27/8
Three-Way Post - Aluminum Trim
• Includes corner post, 3 slottedconnectors, attachment hardwareand 1 EVPVPFA Aluminum Trims.
• 10% upcharge for Tungstentrim/paint
EVPCPA330 127 30 27/8
EVPCPA342 168 42 27/8
EVPCPA348 188 48 27/8
EVPCPA354 206 54 27/8
EVPCPA366 243 66 27/8
EVPVPA2 Two-Way Variable Height CornerPost Aluminum Trim
• Includes corner post, 2 slottedconnectors, (different height),attachment hardware, 3 EVPVTFA(different height).
• 10% upcharge for Tungstentrim/paint
EVPVPA242 134 42 27/8
EVPVPA248 149 48 27/8
EVPVPA254 164 54 27/8
EVPVPA266 195 66 27/8
Three-Way Variable Height CornerPost Aluminum Trim
• Includes corner post, 3 slottedconnectors, (different height),attachment hardware, 3 EVPVTFA(different height).
• 10% upcharge for Tungstentrim/paint
EVPVPA342 168 42 27/8
EVPVPA348 187 48 27/8
EVPVPA354 206 54 27/8
EVPVPA366 244 66 27/8
EVPCPA2
EVPCPA3
EVPVPA3
EVPVPA4 Four-Way Variable Height CornerPost Aluminum Trim
• Includes corner post, 4 slottedconnectors, (different height),attachment hardware, 3 EVPVTFA(different height).
• 10% upcharge for Tungstentrim/paint
EVPVPA442 192 42 27/8
EVPVPA448 181 48 27/8
EVPVPA454 231 54 27/8
EVPVPA466 271 66 27/8
EVPEERA End-of-Run Extension - Non-Slotted - Aluminum Trim
• 10% upcharge for Tungstentrim/paint
EVPEERA12 25 12 27/8
EVPEERA24 32 24 27/8
EVPEERSA End-of-Run Extension - Slotted -Aluminum Trim
• 10% upcharge for Tungstentrim/paint
EVPEERSA06 28 6 27/8
EVPEERSA12 28 12 27/8
EVPEERSA24 39 24 27/8
EVPCEPA1 One-Way Post Extension - Non-Slotted - Aluminum Trim
• 10% upcharge for Tungstentrim/paint
EVPCEPA106 41 6 27/8
EVPCEPA112 44 12 27/8
EVPCEPA124 59 24 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
82
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 83
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
One-Way Post Extension - Slotted -Aluminum Trim
• Includes corner post, 1 slottedconnector, attachment hardware, 3EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEPSA106 53 6 27/8
EVPCEPSA112 57 12 27/8
EVPCEPSA124 74 24 27/8
Inline Post Extension - Non-Slotted - Aluminum Trim
• Includes corner post, 2 non-slottedconnectors, attachment hardware, 2EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEIPA206 54 6 27/8
EVPCEIPA212 58 12 27/8
EVPCEIPA224 93 24 27/8
EVPCEIPSA2 Inline Post Extension - Slotted -Aluminum Trim
• Includes corner post, 2 slottedconnectors, attachment hardware, 2EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEIPSA206 54 6 27/8
EVPCEIPSA212 58 12 27/8
EVPCEIPSA224 93 24 27/8
Two-Way Post Extension - Non-Slotted - Aluminum Trim
• Includes corner post, 2 non-slottedconnectors, attachment hardware, 2EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEPA206 45 6 27/8
EVPCEPA212 49 12 27/8
EVPCEPA224 80 24 27/8
EVPCEPSA1
EVPCEIPA2
EVPCEPA2
EVPCEPSA2 Two-Way Post Extension - Slotted -Aluminum Trim
• Includes corner post, 2 slottedconnectors, attachment hardware, 2EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEPSA206 54 6 27/8
EVPCEPSA212 58 12 27/8
EVPCEPSA224 93 24 27/8
EVPCEPA3 Three-Way Post Extension - Non-Slotted - Aluminum Trim
• Includes corner post, 3 non-slottedconnectors, attachment hardware, 1EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEPA306 50 6 27/8
EVPCEPA312 53 12 27/8
EVPCEPA324 87 24 27/8
EVPCEPSA3 Three-Way Post Extension -Slotted - Aluminum Trim
• Includes corner post, 3 slottedconnectors, attachment hardware, 1EVPVTFEA.
• 10% upcharge for Tungstentrim/paint
EVPCEPSA306 64 6 27/8
EVPCEPSA312 68 12 27/8
EVPCEPSA324 105 24 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
84
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 85
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Flat Trim - Aluminum
• To be used with 30”h - 66” posts asa replacement trim.
• 10% upcharge for Tungstentrim/paint
• For “U” trim configuration use threeflat trim according to heightspecifications.
• For “L” trim configuration use twoflat trim according to heightconfigurations.
EVPVTFA30 9 301/8 27/8
EVPVTFA36 11 361/8 27/8
EVPVTFA42 14 421/8 27/8
EVPVTFA54 14 541/8 27/8
EVPVTFA66 16 661/8 27/8
EVPVTFA78 18 781/8 27/8
EVPVTFA90 19 901/8 27/8
Flat Extension Trim - Aluminum
• To be used with post extensions only(EVPCEP and EVPCEIP).
• 10% upcharge for Tungstentrim/paint
EVPVTFEA06 7 6 27/8
EVPVTFEA12 7 12 27/8
EVPVTFEA18 8 18 27/8
EVPVTFEA24 8 24 27/8
EVPVTFEA30 9 30 27/8
EVPVTFEA36 11 36 27/8
EVPVTFEA42 12 42 27/8
EVPVTFEA54 14 54 27/8
EVPVTFEA66 16 66 27/8
EVPVTFEA78 18 78 27/8
EVPVTFEA90 19 90 27/8
EVPTVA Panel Trim - Variable Height -Aluminum
• Attaches to the exposed end of thetaller panel when 2 panels ofdifferent height meet in straight run.
• 10% upcharge for Tungstentrim/paint
EVPTVA06 12 6 27/8
EVPTVA12 15 12 27/8
EVPTVA24 28 24 27/8
EVPTVA30 35 30 27/8
EVPTVA36 40 36 27/8
End of Run Trim - Aluminum
• To replace an existing PVC End-ofRun Trim.
• 10% upcharge for Tungstentrim/paint
EVPERTA30 35 30 27/8
EVPERTA42 41 42 27/8
EVPERTA48 47 48 27/8
EVPERTA54 52 54 27/8
EVPERTA66 58 66 27/8
EVPERTA78 64 78 27/8
EVPERTA90 70 90 27/8
EVPVTFA
EVPVTFEA
EVPERTA
EVPTEA Panel Extension Trim - Aluminum
• Attaches to bottom of exposed endof panel to provide extension for En-of-Run post trim kit when usingpanel extensions.
• Does not include slotted connectornor connecting hardware.
• 10% upcharge for Tungstentrim/paint
EVPTEA12 15 12 27/8
EVPTEA24 28 24 27/8
EVPUETA Upmount Extension Trim -Aluminum
• 10% upcharge for Tungstentrim/paint
EVPUETA12 28 12 27/8
EVPUETA Upmount End-of-Run Trim-Aluminum
• Replaces existing 66”h End-of-RunTrim Only
• Comes with one Upmount ExtensionTrim EVPUET12 and one UpmountEnd-of-Run Trim.
• Must be used in conjunction withslotted connectors.
• 10% upcharge for Tungstentrim/paint
EVPUETA66 67 27/8 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
86
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 87
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Panel Top Trim - Aluminum -Factory Installed
• To be used when shipping newpanels with aluminum trim.
• Price is based on replacing standardPVC Top Trim with aluminum.
• 10% upcharge for Tungstentrim/paint
EVPTTA18 7 18 27/8
EVPTTA24 9 24 27/8
EVPTTA30 12 30 27/8
EVPTTA36 14 36 27/8
EVPTTA42 17 42 27/8
EVPTTA48 23 48 27/8
EVPTTA54 26 54 27/8
EVPTTA60 30 60 27/8
Panel Top Trim - Aluminum - FieldInstalled
• To be used when replacing existingPVC Top Trim with Aluminum in thefield.
• 10% upcharge for Tungstentrim/paint
EVPTTA18F 26 18 27/8
EVPTTA24F 35 24 27/8
EVPTTA30F 41 30 27/8
EVPTTA36F 49 36 27/8
EVPTTA42F 56 42 27/8
EVPTTA48F 64 48 27/8
EVPTTA54F 70 54 27/8
EVPTTA60F 81 60 27/8
EVPTNTA Panel Top Notched Trim -Aluminum - Factory Installed
• Note: Used when connecting a lowerpanel to a higher panel
• To be used when shipping newpanels with aluminum trim.
• Price is based on replacing standardPVC Top Trim with aluminum.
• 10% upcharge for Tungstentrim/paint
EVPTNTA18 8 18 27/8
EVPTNTA24 11 24 27/8
EVPTNTA30 13 30 27/8
EVPTNTA36 15 36 27/8
EVPTNTA42 18 42 27/8
EVPTNTA48 24 48 27/8
EVPTNTA54 27 54 27/8
EVPTNTA60 32 60 27/8
Panel Top Notched Trim -Aluminum - Field Installed
• Note: Used when connecting a lowerpanel to a higher panel
• To be used when replacing existingPVC Top Trim with aluminum in thefield.
• 10% upcharge for Tungstentrim/paint
EVPTNTA18F 27 18 27/8
EVPTNTA24F 36 24 27/8
EVPTNTA30F 42 30 27/8
EVPTNTA36F 50 36 27/8
EVPTNTA42F 57 42 27/8
EVPTNTA48F 66 48 27/8
EVPTNTA54F 71 54 27/8
EVPTNTA60F 82 60 27/8
EVPTTA
EVPTTA_ _F
EVPTNTA_ _F
EVPTDNTA Panel Top Double Notched Trim -Aluminum - Factory Installed
• Note: Used when connecting a lowerpanel to two higher panels
• To be used when shipping newpanels with aluminum trim.
• Price is based on replacing standardPVC Top Trim with aluminum.
• 10% upcharge for Tungstentrim/paint
EVPTDNTA18 9 18 27/8
EVPTDNTA24 12 24 27/8
EVPTDNTA30 14 30 27/8
EVPTDNTA36 16 36 27/8
EVPTDNTA42 19 42 27/8
EVPTDNTA48 25 48 27/8
EVPTDNTA54 28 54 27/8
EVPTDNTA60 34 60 27/8
EVPTDNTA_ _F Panel Top Double Notched Trim -Aluminum - Field Installed
• Note: Used when connecting a lowerpanel to two higher panels
• To be used when replacing existingPVC Top Trim with aluminum in thefield.
• 10% upcharge for Tungstentrim/paint
EVPTDNTA18F 28 18 27/8
EVPTDNTA24F 37 24 27/8
EVPTDNTA30F 44 30 27/8
EVPTDNTA36F 51 36 27/8
EVPTDNTA42F 58 42 27/8
EVPTDNTA48F 67 48 27/8
EVPTDNTA54F 72 54 27/8
EVPTDNTA60F 83 60 27/8
February 1, 2007
To order panels, please specify: Model number, trim color, fabric option. Please see Panel Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
88
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H DDESCRIPTION
PanelsAluminum Trim
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 89
ElectricalTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
Step-by-Step Specification – 8-Wire Electrical System
Step Determine the location of the source power entering the panel run.
1. At the base of the panel.
(a) Use EVE8FR1 Reversible Floor Power Entry (default to EVE8FR1).
(b) Select the panel to which the Floor Power Entry will be attached. This panel requires an EVEPD Power Distribution Housing.
(c) Select the side of the panel and the receptacle outlet to which the Floor Power Entry is to be attached.
2. From the ceiling.
(a) Use EVE8EC1 Ceiling Power Entry.
(b) Select the post through which to feed the Ceiling Power Entry.
(c) One panel adjacent to the selected post requires an EVEPD Power Distribution Housing.
(d) Attach Ceiling Power entry to the nearest end of the Power Distribution Housing.
Step Determine which panels are to be powered.
1. Use EVE8PD Power Distribution Housing that corresponds with the width of the panel.
Step Connect power to the powered panels.
1. Use EVE8CP16 Jumper Cable between two adjacent powered panels.
2. Use EVE8CP20 Jumper Cable between two adjacent powered panels separated by a post.
3. Use EVE8CP Pass-Through Cables to connect powered panels that are separated by one or more non-powered panels (maximum
distance between the powered panels is 16 feet).
(a) The length of the Pass-Through Cable is calculated by adding together the widths of the non-powered panels that separate
the two powered panels and applying an additional 16" to the total. (EVE8PD Power Distribution Housing is positioned 8" in
from the ends of the powered panel.)
(b) An additional 3" must be added to the Pass-Through Cable for each post that the cable passes through.
4. From the price list, select the EVE8CP Pass-Through Cable that matches the calculated length. If the length is between listed
sizes, use the next size up.
Step Determine the location and circuitry of the receptacles.
1. Each powered panel has four (4) potential locations for EVE8RD Duplex Receptacles – 2 per side. (Exception: 24" wide panel has
only two potential locations – 1 per side, 18" wide panel has no locations for receptacles.)
2. At each receptacle location there is a choice of four circuit options. Select a circuit option for each location.
Circuits one & two are utility circuits; circuits A & B are dedicated circuits.
1
2
3
4
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
90
ElectricalTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Evolve’s Modified 8-Wire Electrical System
Evolve has modified its 8-Wire Electrical System to stay abreast of changing industry standards.
Electrical
This modification allows for the integration of the commonly required “2+2” configuration (2 utility circuits, 2 dedicated circuits) found in the source power of
most of today’s North American buildings.
This system is rated for connection to:
1. A grounded 120/240V, single phase, 20 A, 60Hz
2. A 120/208V, 3 phase, 20 A, 60Hz branch circuit
Data/Comm
Evolve’s duplex receptacle openings will now conform to the ANSI/TIA/EIA Furniture Opening Standard od 1.38 +/- .035 x 2.71 +/- .04. There will no longer
be the need to use adapter plates to reduce the size of Evolve’s raceway opening, or to use Evolve dedicated data plates for data/comm terminations.
Transition
A transition cable will be available to connect the previous system to the modified system when adding panels to an existing installation. Also, new raceway
covers with the smaller openings can be provided and applied to existing panels when retrofitted with new electrics.
ElectricalTips
91February 1, 2007
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Wiring Schematic
Defining “2 + 2” Wiring Configurations
2 + 2 Configuration (8 wire, 4 circuit)Two Utility Circuits [Evolve’s new #1 & #2 circuits] share one neutral wire and one ground wire.(2 hot [circuit] wires + 1 neutral wire*** + 1 green ground wire* = 4 wires)
Two Dedicated Circuits [Evolve’s new “A” & “B” circuits] share one neutral wire and one ground wire.(2 hot [circuit] wires + 1 neutral wire *** + 1 green/yellow ground wire** = 4 wires)
Note:It is the ground wire that makes the difference between “Utility” and “Dedicated” circuits. Refer to Wiring Schematics found on page 63 ofnew Price List.
* A Green ground wire is a “system” ground. This means it could be grounded to any piece of metal, including the panel.** A Green/Yellow ground wire is isolated, within the wiring conduit, all the way back to the box at the source (building ground).*** All Neutral Wires are 10 gauge rather than 12 gauge meaning they are larger than normal, allowing greater protection against “noise”or interference on the circuit.
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
92
ElectricalTecnical Information
Step 1 Determine the location of the power source entering the panel run.1. At the base of the panel.
(a) Use EVE8FR Reversible Floor Power Entry (default to EVE8FR).(b) Select the panel to which the Floor Power Entry will be attached. This panel requires an EVE8PD Power Distribution Housing.(c) Select the side of the panel and the receptacle outlet to which the Floor Power Entry is to be attached.
2. From the ceiling.(a) Use EVE8EC1 Ceiling Power Entry.(b) Select the post through which to feed the Ceiling Power Entry.(c) One panel adjacent to the selected post requires an EVE8PD Power Distribution Housing.(d) Attach Ceiling Power entry to the nearest end of the Power Distribution Housing.
Step 2 Determine which panels are to be powered.1. Use EVE8PD Power Distribution Housing that corresponds with the width of the panel.
Step 3 Connect power to the powered panels.
1. Use EVE8CP16 Jumper Cable between two adjacent powered panels.
2. Use EVE8CP20 Jumper Cable between two adjacent powered panels separated by a post.3. Use EVE8CP Pass-Through Cables to connect powered panels that are separated by one or more non-powered panels (maximum
distance between the powered panels is 12 feet).(a) The length of the Pass-Through Cable is calculated by adding together the widths of the non-powered panels that separate the
two powered panels and applying an additional 16" to the total. (EVE8PD Power Distribution Housing is positioned 8" in from theends of the powered panel.)
(b) An additional 4" must be added to the Pass-Through Cable for each post that the cable passes through.4. From the price list, select the EVE8CP Pass-Through Cable that matches the calculated length. If the length is between listed sizes,
use the next size up.
Step 4 Determine the location and circuitry of the receptacles.1. Each powered panel has four (4) potential locations for EVE8RD Duplex Receptacles – 2 per side. (Exception: 24" wide panel has only
two potential locations – 1 per side, 18" wide panel has no locations for receptacles.)2. At each receptacle location there is a choice of four (4) circuit options. Select a circuit option for each location.
Circuits one and two are utility circuits; circuits A and B are dedicated circuits.
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
93February 1, 2007
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Many components make up a configuration. This page provides an exploded view of a sample configuration highlighting each electrical component requiredwhen specifying this configuration.
Components
A. EVE8PD42 Power Distribution Housing Note: 8 wire, 4 circuits (4th circuit dedicated) labeled A or B.
B. EVE8CP16 Jumper CableNote: EVE8CP16 connects two powered panels positioned side by side.
EVE8CP20 connects two powered panels separated by a post.
C. EVE8RD Duplex Receptacle
D. EVE8CP Pass-Through CableNote: Pass-Through Extension Cable (EVE8CPF154) available – extends power capability beyond 208".
A
B
C
D
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
ElectricalTips
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
94
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE L
Electrical
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVE8PD Power DistributionHousing
• Power housing is specified per panel size.e.g. EVE8PD36 is for use in a 36" panel.
• 8 wire, 4 circuits (4th circuit dedicated).• Provides two duplex receptacles per
panel side on all panel widths exceptthe 24" wide panel.
• 24" wide panel allows for only one (1)duplex receptacle on one panel side.
EVE8PD24 91 61/4
EVE8PD30 122 111/2
EVE8PD36 129 171/2
EVE8PD42 132 231/2
EVE8PD48 141 291/2
EVE8PD54 142 391/4
EVE8PD60 143 411/2
EVE8CP Jumper Cable • The EVE8CP16 electrically connects twopowered panels positioned side by side.
• The EVE8CP20 electrically connects twopowered panels separated by a post.
DESCRIPTION
EVE8CP16 75 16
EVE8CP20 87 20
EVE8CP Pass-Through Cable • Flexible metal conduit is used todistribute electrical power through non-powered panels.
• To calculate the length of a Pass-ThroughCable, add the widths of the non-powered panels separating the poweredpanels (panels with distribution housingattached). To this add 16" (distance fromthe edge of the panel to the distributionhousing x 2).
• Add additional 3” when passing througha corner post. See the Tips at the beginning of the section for more details.
• Pass-Through Extension Cable connectsto the end of a Pass-Through Cable toextend power capability beyond 208".
EVE8CP40 98 401/2
EVE8CP46 100 461/2
EVE8CP52 103 521/2
EVE8CP58 110 581/2
EVEC8P64 115 641/2
EVE8CP70 118 701/2
EVE8CP76 120 761/2
EVE8CP82 125 821/2
EVE8CP88 129 881/2
EVE8CP94 133 941/2
EVE8CP100 136 1001/2
EVE8CP106 143 1061/2
EVE8CP118 151 1181/2
EVE8CP130 165 1301/2
EVE8CP142 172 1421/2
EVE8CP154 181 1541/2
EVE8CP172 194 1721/2
EVE8CP190 205 1901/2
EVE8CP208 211 2081/2
Pass-Through Extension CableEVE8CPF154 181 1541/2
February 1, 2007 95
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE L
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
DESCRIPTION
Electrical
EVE8FR1 Reversible Floor PowerEntry
• Takes the place of a duplex receptacle bysnapping into the base power way.
• Includes 72” long flexible metal conduit.• Must be hard wired to source power by a
licensed electrician.• Diameter is 0.85
EVE8FR1 206
EVE8RD Duplex Receptacle • Up to 6 receptacles per circuit.• EVE8RD1 = Circuit #1 (utility circuit)• EVE8RD2 = Circuit #2 (utility circuit)• EVE8RDA = Circuit #A (dedicated)• EVE8RDB = Circuit #B (dedicated)
EVE8FR2 Reversible Floor PowerEntry
• Takes the place of a duplex receptacle bysnapping into the base power way.
• Includes 144” long flexible metal conduit.• Must be hard wired to source power by a
licensed electrician.
EVE8FR2 266
EVE8CI-1 “I” Connector Female - Female connector used to connecttwo Pass-Through Cables.
EVE8CI-1 51
EVE8RD1 and EVE8RD2 (#1 and #2 share common ground)EVE8RDA and EVE8RDB (A and B share common ground)
EVE8RD1 19EVE8RD2 19EVE8RDA 19EVE8RDB 19
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
96
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W L
Electrical
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVEENY-2 Hardware Power EntryBox New York
• A licensed electrician must provide hardwire connection within the junction box.
• Not for use in panels less than 36”W.
EVEENY2 263 3 28 21/2
EVDPE Post ExtensionData/Comm Lay-in
• Attaches to the top of a post to bringpower and/or data cables from theceiling to the panel run thtough.
• Post extension can be opened onone side for lay-in or power and/ordata cables.
• Made of aluminum and can be field cut.• Three-sided power pole with snap-
on fourth side.• (60) CAT 5 Cables w/o electric• (45) CAT 5 Cables w/o electric
EVDPE64 100 64 2EVDPE84 122 84 2
EVEJBC-1 Hardware Junction BoxChicago
• Can be retrofitted in any size of panel atthe receptacle location.
• Gives access from one side only at eachlocation.
• Customer to supply conduit, wiring,receptacle, and face plate.
• 2 per panel ,except 24” panel only one.
EVEJBC-1 58
DESCRIPTION
Note: A Licensed elecrician must provide hardware connection with the junction box.
EVE8EC Ceiling Power Entry • Snaps into the end of a PowerDistribution Housing.
• Flexible metal conduit extends into theceiling through a corner post and postextension.
• Must be hard wired to source power by alicensed electrician.
• 4” junction box included.• Post extension ordered separately (see
page 66).
EVE8EC1 158 132EVE8EC2 279 144EVE8EC3 295 180
February 1, 2007 97
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE LDESCRIPTION
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Electrical
EVEA Desktop Data/Power Receptacle
• Accessory Data/Power House• Attaches to scoop at the back of a
worksurface.• Includes 2 Simplexes, 2 Voice/Data Ports
Voice/Data Adapter Kit, 6" Power Cord• Available in black only.• Voice/Data jacks & cable not included.
EVEA54 239 51/2 71/2 21/4
EVEA Adapt Power/Data Module EVEA44 221 23/4 61/4 31/2• Attaches to scoop at the back of aworksurface.
• Includes two Simplexes, two Voice/DataPorts, Voice/Data Adapter Kit, 6’ PowerCord.
• Available in black polycarbonate only.
Note: Height (H) is measured above theworksurface
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
98
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W LDESCRIPTION
Electrical
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVETL Under Storage Task Light • Task light must be at least 6" shorterthan storage component to which itis attached.
• SP41 Rapid Start T8 lamp.• Normal power factor ballast.• 7 foot black cord.• Available in black only.
EVETL18 161 18EVETL24 176 24EVETL36 192 36EVETL48 207 48
EVETLV Variable Intensity Task Light
• Task light must be at least 6" shorterthan storage component to which itis attached.
Same as Under Storage Task Light with 3position rocker switch for variable intensity.
EVETLV24 325 24EVETLV36 343 36EVETLV48 357 48
EVETL Chicago Task Light • Task light must be at least 6" shorterthan storage component to which itis attached.
Due to certain electrical codes for theChicago area, Chicago Task Lights havebeen made available to accomodateelectrical equipment in Chicago.
EVETL18C 207 18EVETL24C 217 24EVETL36C 228 36EVETL48C 239 48
EVECC Cord Cover • Attaches to panels vertically betweenmodules to provide enclosures for poweror data cords.
• Available in 21” and 36” lengths, 6 perpack.
• Can be field cut to required length.
For use at panel connection in straight run:EVECC121 18 21EVECC136 26 36
For use at panel connection in a corner:EVECC221 18 21EVECC236 26 36
EVEMA Mini-Adapt Power Module • Attaches to scoop at the back of theworksurface.
• Includes two Simplex outlets.• 6’ black cord• Available in black polycarbonate only.• Note: Height (H( is measured above the
worksurface.
EVEMAE1 130 2 35/8 23/8
EVEMA Mini-Adapt Data Module • Attaches to scoop at the back of theworksurface.
• Includes two Voice/Data Port,Voice/Data Adapter Kit.
• Accepts Cat3, Cat 5, Cat 5e, Cat 6 jacks.• Available in black polycarbonate only.• Note: Height (H( is measured above the
worksurface.
EVEMAD1 104 2 35/8 23/8
February 1, 2007 99
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W LDESCRIPTION
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
ElectricalMini-ADAPT Modules
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order electrical products, please specify: Model number. Please see Electrical Tips at the beginning of the section for further details.Complete ordering guidelines and finish listings can be found in the Introduction section.
100
ElectricalTransition Components
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVH8RC Raceway Covers • Raceway Cover with 1.38” x 2.71” duplexreceptacle openings.
• Includes 2 receptacle opening shields.• Raceway Covers are sold individually.
EVH8RC24L 17 6 24EVH8RC24R 17 6 24EVH8RC30 25 6 30EVH8RC36 28 6 36EVH8RC42 32 6 42EVH8RC48 36 6 48EVH8RC54 41 6 54EVH8RC60 44 6 60
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W LDESCRIPTION
EVH8RA Raceway Opening Adapter • Used in old raceway to retrofit for newelectrical
• PVC Adapter reduces the size of theDuplex Receptacle opening toaccommodate the new style DuplexReceptacle
• Pressure fits inside Raceway Covers priorto 4/1/2005.
• Opening size is 1.38” x 2.71”• Sold in packs of 12• Note: Black only
EVH8RA01 58 41/2 51/2
EVE8CT Transition Jumper Cable • The EVE8CT 16 electrically connects anEVE8PD Power Distribution Housing (preApril 1, 2005) to an EVE8PD PowerDistribution Housing when connectingpowered panels that are positioned side-by-side.
• The EVE8CT20 electrically connects anEVEPD Power Distribution Housing (preApril 1, 2005) to an EVE8PD PowerDistribution Housing when connectingpowered panels that are separated by apost.
• Note: If there is one or more pass-thrupanels between a panel that containsthe old Power Distribution Housing (preApril 1, 2005) and a panel that containsthe new Power Distribution Housing,then an EVE8CI-1 “I” Connector can beattached to the Transition Jumper Cable.This allows for the addition of anappropriate EVE8CP Pass-Through Cableto span the gap between the EVE8CTTransition Jumper Cable and the EVE8PDPower Distribution Housing.
EVE8CT16 75 16EVE8CT20 87 20
February 1, 2007 101
WorksurfacesTips
The information listed below provides you with basic features of Evolve worksurfaces.
• Evolve Thermally Fused worksurfaces are 11/8" thick, HP are 11/16" thick, and are finished with 3 mm PVC edging on all sides.
• Standard laminate is available in thermally-fused laminate (T) or high pressure laminate (H).
• Wood grain laminates on corner worksurfaces run diagonally to the adjacent worksurfaces. Note, wood grain laminates do not run diagonally on 48" corners.
• Wood grain laminate worksurfaces will have matching woodgrain trim unless specified otherwise.
• Wood grain laminate worksurfaces will have matching wood grain trim unless specifically specified otherwise.
• All worksurfaces have threaded inserts for metal-to-metal connection of support hardware.
• All worksurfaces require support items. These are priced separately within this section.
• Communication and electrical wires are routed through a cable scoop located at the back of the worksurface. When specifying a Straight Worksurface(EVWS) or a Curvilinear Worksurface (EVWVL), note that the number of cable scoops depends upon the width of the worksurface. All other worksurfaceshapes have one scoop on panel edges.
• Tungsten Trim (TU) available at no charge.
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
One ScoopEVWS 24" – 48"
One ScoopEVWVL 24" – 48"
Two ScoopsEVWS 54" – 72"
Two ScoopsEVWVL 54" – 72"
February 1, 2007102
WorksurfacesTips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Many components make up a configuration. This page provides a three dimensional view of a sample configuration highlighting each worksurfacecomponent required when specifying this configuration.
Components
A. EVWVL2436 Curvilinear Worksurface – LeftNote: When deepest end equals 24", opposite depth is 18"
When deepest end equals 30", opposite depth is 24"
B. EVWCC3618 Corner Curved Worksurface
C. EVWVR2436 Curvilinear Worksurface – Right
D. EVWTEV1536 End Transaction Surface with Cut-out
A
B
C
D
February 1, 2007 103
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
WorksurfacesGrain Direction
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVP PanelsWith exceptioin of 66” highpanels, they are used vertical
EVWTCLxxxxWGWorksurfaces
EVWWL/R Worksurfaces EVWCD Worksurfaces
EVWCCKxxxWGWorksurfaces
EVWCC Worksurfaces EVPD Doors EVWTC Worksurfaces EVQR and EVWQRCWorksurfaces
EVWCE Worksurfaces
EVWCK Worksurfaces EVWCCxxxWGWorksurfaces
EVWS Worksurfaces EVWR Worksurfaces
EVWP Worksurfaces
EVWHL Worksurfaces EVWCKxxxxWGWorksurfaces
WVWCCK Worksurfaces EVWR Worksurfaces
EVWT, EVWTV, EVWTW,EVWTEV, EVWTD, EVWTDV,EVWTDD Worksurfaces
EVWPL/R Worksurfaces EVWD Worksurfaces EVWL Worksurfaces EVHP End Panels
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
104
EVWS Straight Worksurface • Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWS1824 81 110 24 18EVWS1830 87 118 30 18EVWS1836 99 133 36 18EVWS1842 130 176 42 18EVWS1848 156 210 48 18EVWS1854 183 248 54 18EVWS1860 206 278 60 18EVWS1866 216 290 66 18EVWS1872 225 302 72 18
EVWS2424 83 112 24 24EVWS2430 90 120 30 24EVWS2436 101 135 36 24EVWS2442 132 178 42 24EVWS2448 158 214 48 24EVWS2454 186 250 54 24EVWS2460 208 280 60 24EVWS2466 218 293 66 24EVWS2472 227 304 72 24
EVWS3024 99 132 24 30EVWS3030 105 143 30 30EVWS3036 125 167 36 30EVWS3042 176 236 42 30EVWS3048 186 250 48 30EVWS3054 204 273 54 30EVWS3060 218 293 60 30EVWS3066 226 304 66 30EVWS3072 240 323 72 30
EVWVL Curvilenear Worksurface— Left
• When deepest end equals 24”. theopposite depth is 18”
• When deepest end equals 30”, theopposite depth is 24”
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE W D HDESCRIPTION
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWVL2424 109 146 24 24EVWVL2430 114 152 30 24EVWVL2436 135 183 36 24EVWVL2442 158 214 42 24EVWVL2448 181 244 48 24EVWVL2454 204 273 54 24EVWVL2460 221 304 60 24EVWVL2466 244 334 66 24EVWVL2472 262 365 72 24
EVWVL3024 114 152 24 30EVWVL3030 119 158 30 30EVWVL3036 142 195 36 30EVWVL3042 195 262 42 30EVWVL3048 204 273 48 30EVWVL3054 226 304 54 30EVWVL3060 244 334 60 30EVWVL3066 262 365 66 30EVWVL3072 280 395 72 30
A
B
A
B
NOTE: EVWVL 24 36A B
DEPTH
WIDTH
NOTE: EVWVL 24 36A B
DEPTH
WIDTH
February 1, 2007 105
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWVR CurvilinearWorksurface — Right
• When deepest end equals 24”. theopposite depth is 18”
• When deepest end equals 30”, theopposite depth is 24”
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWVR2424 109 146 24 24EVWVR2430 114 152 30 24EVWVR2436 135 183 36 24EVWVR2442 158 214 42 24EVWVR2448 181 244 48 24EVWVR2454 204 273 54 24EVWVR2460 221 304 60 24EVWVR2466 244 334 66 24EVWVR2472 262 365 72 24
EVWVR3024 114 152 24 30EVWVR3030 119 158 30 30EVWVR3036 142 195 36 30EVWVR3042 195 262 42 30EVWVR3048 204 273 48 30EVWVR3054 226 304 54 30EVWVR3060 244 334 60 30EVWVR3066 262 365 66 30EVWVR3072 280 395 72 30
EVWNL Notched Worksurface— Left
• When deepest end equals 24”. theopposite depth is 18”
• When deepest end equals 30”, theopposite depth is 24”
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWNL2424 109 146 24 24EVWNL2430 114 152 30 24EVWNL2436 135 183 36 24EVWNL2442 158 214 42 24EVWNL2448 181 244 48 24EVWNL2454 204 273 54 24EVWNL2460 221 304 60 24EVWNL2466 244 334 66 24EVWNL2472 262 365 72 24
EVWNL3024 114 152 24 30EVWNL3030 119 158 30 30EVWNL3036 142 195 36 30EVWNL3042 195 262 42 30EVWNL3048 204 273 48 30EVWNL3054 226 304 54 30EVWNL3060 244 334 60 30EVWNL3066 262 365 66 30EVWNL3072 280 395 72 30
NOTE: EVWVR 24 36A B
DEPTH
WIDTH
AB
NOTE: EVWNL 24 36A B
DEPTH
WIDTH
A
B
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
106
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWNR Notched Worksurface— Right
• When deepest end equals 24”. the oppositedepth is 18”
• When deepest end equals 30”, the oppositedepth is 24”
• Support hardware must be orderedseparately. See the listings in this section.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWNR2424 109 146 24 24EVWNR2430 114 152 30 24EVWNR2436 135 183 36 24EVWNR2442 158 214 42 24EVWNR2448 181 244 48 24EVWNR2454 204 273 54 24EVWNR2460 221 304 60 24EVWNR2466 244 334 66 24EVWNR2472 262 365 72 24
EVWNR3024 114 152 24 30EVWNR3030 119 158 30 30EVWNR3036 142 195 36 30EVWNR3042 195 262 42 30EVWNR3048 204 273 48 30EVWNR3054 226 304 54 30EVWNR3060 244 334 60 30EVWNR3066 262 365 66 30EVWNR3072 280 395 72 30
EVWCC Corner CurvedWorksurface
• When specifying Wood Grain Laminatefor worksurfaces 42” wide or less, grainwill run diagonally
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWCC3618 287 369 36 18EVWCC3624 316 406 36 24EVWCC4224 427 550 42 24EVWCC4230 464 595 42 30EVWCC4824 499 629 48 24EVWCC4830 523 726 48 30
NOTE: EVWNR 24 36A B
DEPTH
WIDTH
AB
NOTE: EVWCC 36 18B A
WIDTH DEPTH
B
A
February 1, 2007 107
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWCCK Corner Worksurfacewith Curved KeyboardSupport
• When specifying Wood Grain Laminatefor worksurfaces 42” wide or less, grainwill run diagonally
• Keyboard support is 11” deep, adjusts 6”above and 6” below surface with apositive/negative tilt (15º to -15º)
• Keyboard mechanim is included• Support hardware must be ordered
separately.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWCCK4224 866 977 42 24EVWCCK4230 924 1044 42 30EVWCCK4824 936 1064 48 24EVWCCK4830 965 1095 48 30
EVWCK Corner KeyboardWorksurface
• When specifying Wood Grain Laminatefor worksurfaces 42” wide or less, grainwill run diagonally
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWCK3618 293 375 36 18EVWCK3624 377 467 36 24EVWCK4224 432 557 42 24EVWCK4230 493 659 42 30EVWCK4824 527 733 48 24EVWCK4830 587 803 48 30
EVWCF Five-Sided Worksurface • When specifying Wood Grain Laminatefor worksurfaces 42” wide or less, grainwill run diagonally
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWCF3618 287 369 36 18EVWCF3624 316 406 36 24EVWCF4224 427 550 42 24EVWCF4230 464 595 42 30EVWCF4824 499 629 48 24EVWCF4830 523 726 48 30
NOTE: EVWCCK 42 24B A
WIDTH DEPTH
B
A
NOTE: EVWCK 36 18B A
WIDTH DEPTH
B
A
NOTE: EVWCF 42 24B A
WIDTH DEPTH
B
A
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
108
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
Worksurfaces
EVWCEL Extended Curved Corner— Left
• There are three cable scoops on thisworksurface
• Support hardware must be orderedseparately. See listing in this section ofthe price list
• D’b’ = 24” or 30”• W’b’ = 36”, 42” or 48”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
Note: Wood Grain Laminates do not rundiagonally on Extended Curved Corners
EVWCEL362448 390 484 36-48 24EVWCEL362460 425 531 36-60 24EVWCEL362466 468 584 36-66 24EVWCEL362472 518 647 36-72 24EVWCEL362478 553 691 36-78 24EVWCEL362484 596 744 36-84 24
EVWCEL422460 448 558 42-60 24EVWCEL422466 493 616 42-66 24EVWCEL422472 545 680 42-72 24EVWCEL422478 582 726 42-78 24EVWCEL422484 628 783 42-84 24
EVWCEL423060 504 631 42-60 30EVWCEL423066 553 691 42-66 30EVWCEL423072 605 755 42-72 30EVWCEL423078 648 809 42-78 30EVWCEL423084 691 862 42-84 30
EVWCEL482460 532 639 48-60 24EVWCEL482466 574 711 48-66 24EVWCEL482472 617 777 48-72 24EVWCEL482478 679 829 48-78 24EVWCEL482484 705 879 48-84 24
EVWCEL483060 561 702 48-60 30EVWCEL483066 611 766 48-66 30EVWCEL483072 664 830 48-72 30EVWCEL483078 714 893 48-78 30EVWCEL483084 753 942 48-84 30
EVWCER Extended Curved Corner— Right
• There are three cable scoops on thisworksurface
• Support hardware must be orderedseparately. See listing in this section ofthe price list
• D’b’ = 24” or 30”• W’b’ = 36”, 42” or 48”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
Note: Wood Grain Laminates do not rundiagonally on Extended Curved Corners
EVWCER362448 390 484 36-48 24EVWCER362460 425 531 36-60 24EVWCER362466 468 584 36-66 24EVWCER362472 518 647 36-72 24EVWCER362478 553 691 36-78 24EVWCER362484 596 744 36-84 24
EVWCER422460 448 558 42-60 24EVWCER422466 493 616 42-66 24EVWCER422472 545 680 42-72 24EVWCER422478 582 726 42-78 24EVWCER422484 628 783 42-84 24
EVWCER423060 504 631 42-60 30EVWCER423066 553 691 42-66 30EVWCER423072 605 755 42-72 30EVWCER423078 648 809 42-78 30EVWCER423084 691 862 42-84 30
EVWCER482460 532 634 48-60 24EVWCER482466 574 711 48-66 24EVWCER482472 617 777 48-72 24EVWCER482478 679 829 48-78 24EVWCER482484 705 879 48-84 24
EVWCER483060 561 702 48-60 30EVWCER483066 611 766 48-66 30EVWCER483072 664 830 48-72 30EVWCER483078 714 893 48-78 30EVWCER483084 753 942 48-84 30
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
CA
B
NOTE: EVWCEL 36 24 72A B C
DEPTH
DEPTH
WIDTH
B
A
NOTE: EVWCER 36 24 72A B C
DEPTH
DEPTH
WIDTH
B
CB
February 1, 2007 109
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
W
EVWL “L” Worksurface • There are three cable scoops on thisworksurface
• Support hardware must be orderedseparately. See listing in this section ofthe price list
• Must be specified either left or righthanded.
• D’b’ = 18”• W’b’ = 36”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWLL2472 442 590 72 24EVWLR2472 442 590 72 24
EVWH Hatchet Worksurface • Cable scoop is in the center of the 36”wide enge.
• Support hardware must be orderedseparately. See listing in this section ofthe price list
• Leg is included• Must be specified either left or right
handed.• D’b’ = 18”• W’b’ = 36”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWHL3672 677 846 72 29EVWHR3672 677 846 72 29
EVWD “D” Worksurface • Support hardware must be orderedseparately. See listing in this section ofthe price list
• Leg is included• Must be specified either left or right
handed.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWD2442 316 426 42 24EVWD2448 325 437 48 24EVWD2460 341 458 60 24EVWD2472 366 494 72 24
EVWD3048 347 472 48 30EVWD3060 366 494 60 30EVWD3072 405 546 72 30
D
W
* Right Shown
* Right Shown
72”24”
36”18”
72”30”
36”18”
EVWWL Wedge Worksurface -Left
• There are two scoops on thisworksurface
• Support hardware must be orderedseparately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.
Note the flooring abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
EVWWL2460 393 495 60 24 34EVWWL2466 449 529 66 24 34EVWWL2472 470 561 72 24 34
EVWWL3060 506 577 60 30 34EVWWL3066 574 618 66 30 34EVWWL3072 617 659 72 30 34
EVWWR Wedge Worksurface -Right
• There are two scoops on thisworksurface
• Support hardware must be orderedseparately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.
Note the flooring abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
EVWWR2460 393 495 60 24 34EVWWR2466 449 529 66 24 34EVWWR2472 470 561 72 24 34
EVWWR3060 506 577 60 30 34EVWWR3066 574 618 66 30 34EVWWR3072 617 659 72 30 34
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
110
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
NOTE: EVWWL 24 72A B
DEPTH
WIDTH
NOTE: EVWWL 24 72A B
DEPTH
WIDTH
AB
A
B
February 1, 2007 111
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W D D’b’DESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWPTR P Top - Right • There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• D = 30”, 36” W’b’ = 24”, 30”
W = User Edge
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
EVWPTR245430 483 606 54 24 30EVWPTR246030 519 639 60 24 30EVWPTR246630 543 672 66 24 30EVWPTR247230 573 705 72 24 30
EVWPTR306036 573 701 60 30 36EVWPTR306636 620 741 66 30 36EVWPTR307236 662 778 72 30 36
EVWPTL P Top - Left • There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• D = 30”, 36” W’b’ = 24”, 30”
W = User Edge
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
EVWPTL245430 483 606 54 24 30EVWPTL246030 519 639 60 24 30EVWPTL246630 543 672 66 24 30EVWPTL247230 573 705 72 24 30
EVWPTL306036 573 701 60 30 36EVWPTl306636 620 741 66 30 36EVWPTL307236 662 778 72 30 36
NOTE: EVWPTL 24 60 30A B C
DEPTH
LENGTH
WIDTH
NOTE: EVWPTL 24 60 30A B C
DEPTH
LENGTH
WIDTH
C
A
B
C
A
B
EVWCD6L 120º Curved D Top - Left • There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• W’b’ - 48” long
Note the following abbeviations:• T = Thermslly-Fused Laminate• H = High Pressure Laminate
EVWCD6L3624 907 1134 36 24EVWCD6L4224 984 1229 42 24EVWCD6L4824 1075 1344 48 24
EVWCD6R 120º Curved D Top -Right
• There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• W’b’ - 48” long
Note the following abbeviations:• T = Thermslly-Fused Laminate• H = High Pressure Laminate
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
112
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W W’b’ DDESCRIPTION
Worksurfaces
EVWCD6R3624 907 1134 36 24EVWCD6R4224 984 1229 42 24EVWCD6R48241075 1344 48 24
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
PANELWIDTH
24”
48”
PANELWIDTH
24”
48”
February 1, 2007 113
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W D HDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWPL Piano Top - Left • There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• D = 18”, 24” 30”• W’b’ = 36”, 42”, 48”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
Note: Wood Grain Laminate to not rundiagonally on Piano Top surfaces.
EVWPL361848 439 561 48 36 18EVWPL361854 480 595 54 36 18EVWPL361860 518 630 60 36 18EVWPL361866 558 664 66 36 18EVWPL361872 595 698 72 36 18
EVWPL362448 442 565 48 36 24EVWPL362454 483 483 54 36 24EVWPL362460 522 633 60 36 24EVWPL362466 562 668 66 36 24EVWPL362472 599 701 72 36 24
EVWPL422454 595 646 54 42 24EVWPL422460 631 683 60 42 24EVWPL422466 699 724 66 42 24EVWPL422472 742 761 72 42 24
EVWPL423060 646 699 60 42 30EVWPL423066 715 739 66 42 30EVWPL423072 757 779 72 42 30
EVWPL482460 668 783 60 48 24EVWPL482466 741 830 66 48 24EVWPL482472 785 878 72 48 24
EVWPL483066 744 833 60 48 30EVWPL483072 789 881 72 48 30
EVWPR Piano Top - Right • There is one scoop on this worksurface.• Support hardware must be ordered
separately. See the listings in thissection.
• Must be specified either left or righthanded.
• Leg is included.• D = 18”, 24” 30”• W’b’ = 36”, 42”, 48”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
Note: Wood Grain Laminate to not rundiagonally on Piano Top surfaces.
EVWPR361848 439 561 48 36 18EVWPR361854 480 595 54 36 18EVWPR361860 518 630 60 36 18EVWPR361866 558 664 66 36 18EVWPR361872 595 698 72 36 18
EVWPR362448 442 565 48 36 24EVWPR362454 483 599 54 36 24EVWPR362460 522 633 60 36 24EVWPR362466 562 668 66 36 24EVWPR362472 599 701 72 36 24
EVWPR422454 595 646 54 42 24EVWPR422460 631 683 60 42 24EVWPR422466 699 724 66 42 24EVWPR422472 742 761 72 42 24
EVWPR423060 646 699 60 42 30EVWPR423066 715 739 66 42 30EVWPR423072 757 779 72 42 30
EVWPR482460 668 783 60 48 24EVWPR482466 741 830 66 48 24EVWPR482472 785 878 72 48 24
EVWPR483066 744 833 60 48 30EVWPR483072 789 881 72 48 30
A
B
NOTE: EVWPL 36 18 48A B C
DEPTH
DEPTH
LENGTH
NOTE: EVWPL 36 18 48A B C
DEPTH
DEPTH
LENGTH
C
A
B
C
EVWQR Quarter Round PanelWorksurface
• The worksurface edge running along thepanel face is a slightly different lengththan that of the worksurface end,causing the surface to be handed.
• Right hand surface shown.• The user edge abutting the adjacent
worksurface runs straight for 3” beforestarting to curve.
• Support hardware must be orderedseparately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
EVWQRL1818 94 120 18 18EVWQRL2424 132 171 24 24EVWQRL3030 173 220 30 30
EVWQRR1818 94 120 18 18EVWQRR2424 132 171 24 24EVWQRR3030 173 220 30 30
EVWQRC Quarter Round PanelCorner Worksurface
• Wraps around a 90º corner post.• The user edge abutting the adjacent
worksurface runs straight for 3” beforestarting to curve.
• Support hardware must be orderedseparately. See the listing in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
114
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W W’b’ DDESCRIPTION
Worksurfaces
EVWQRC1818 109 140 21 21EVWQRC2424 157 201 27 27EVWQRC3030 194 249 33 33
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 115
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W D HDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
W
D
W
EVWMP Worksurface ModestyPanel
• Modesty panel fastens to the worksurfaceand monoleg to provide additional privacyand support
• Made of cold rolled steel• Metal finish is durable epoxy powder
coated.
Note the following abbreviations:• For “D” and Hatchet Worksurfaces ony
(ordered separately)
EVWMP1242 70 32 12EVWMP1260 82 44 12EVWMP1272 95 56 12
EVWR Radius Worksurface • Support hardware must be orderedsepartately. See the listings in thissection.
• Leg is included.• Notched end is not finished.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWR18 271 365 18 12EVWR24 315 424 24 12EVWR30 567 762 30 12
EVWT Straight TransactionSurface
• Support hardware must be orderedsepartately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWT1512 37 50 12 15EVWT1518 48 64 18 15EVWT1524 58 79 24 15EVWT1530 70 94 30 15EVWT1536 80 107 36 15EVWT1542 91 122 42 15EVWT1548 102 136 48 15
EVWT1554 112 151 54 15EVWT1560 124 166 60 15EVWT1566 134 181 66 15EVWT1572 145 195 72 15EVWT1578 156 209 78 15EVWT1584 166 224 84 15
D
W
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
116
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVWTV Straight TransactionSurface with Cut-out
• Used where transaction surface butts upagainst a taller panel.
• Support hardware must be orderedsepartately. See the listings in thissection.
• Notched end is not finished.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTV1524 66 84 24 15EVWTV1530 76 100 30 15EVWTV1536 86 114 36 15EVWTV1542 98 129 42 15EVWTV1548 109 144 48 15EVWTV1554 119 157 54 15EVWTV1560 130 168 60 15EVWTV1566 142 187 66 15EVWTV1572 151 201 72 15
EVWTCL “L” Corner TransactionSurface
• Support hardware must be orderedsepartately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTCL90 110 141 21 15
EVWTCT “T” Corner TransactionSurface
• Support hardware must be orderedsepartately. See the listings in thissection.
• W’b’ = 21”
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTCT90 97 129 27 15
EVWTE End Transaction Surface • Support hardware must be orderedsepartately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTE1512 48 64 14 15EVWTE1518 58 79 20 15EVWTE1524 70 94 26 15EVWTE1530 80 107 32 15EVWTE1536 91 122 38 15EVWTE1542 102 136 44 15EVWTE1548 112 151 50 15EVWTE1554 124 166 56 15EVWTE1560 134 181 62 15EVWTE1566 145 195 68 15EVWTE1572 156 209 74 15
D
W
D
W
D
W
D
W
W’b’
D
W
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
February 1, 2007 117
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W DDESCRIPTION
EVWTEV End Transaction Surfacewith Cut-Out
• Used at the end of a panel run where thesurface butts up against a taller panel
• Support hardware must be orderedsepartately. See the listings in thissection.
• Notched end is not finished.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTEV1524 76 100 26 15EVWTEV1530 86 114 32 15EVWTEV1536 98 129 38 15EVWTEV1542 109 144 44 15EVWTEV1548 119 157 50 15EVWTEV1554 130 173 56 15EVWTEV1560 142 187 62 15EVWTEV1566 151 201 68 15EVWTEV1572 162 217 74 15
EVWTD “D” Transaction Surface • Support hardware must be orderedsepartately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTD1530 90 120 37 15EVWTD1536 97 130 43 15EVWTD1542 107 144 49 15EVWTD1548 119 158 55 15EVWTD1554 129 174 61 15EVWTD1560 142 190 67 15EVWTD1566 152 205 73 15EVWTD1572 165 223 79 15
EVWTDV End “D” TransactionSurface with Cut-Out
• Used at the end of a panel run where thetransaction surface butts up against ataller panel.
• Support hardware must be orderedsepartately. See the listings in thissection.
• Notched end is not finished.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTDV1530 97 126 37 15EVWTDV1536 102 135 43 15EVWTDV1542 114 150 49 15EVWTDV1548 125 165 55 15EVWTDV1554 134 179 61 15EVWTDV1560 147 196 67 15
EVWTDD Double “D” TransactionSurface
• Support hardware must be orderedsepartately. See the listings in thissection.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVWTDD1548 134 181 62 15EVWTDD1560 156 209 74 15EVWTDD1572 181 244 86 15
W
D
D
W
D
W
D
W
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
118
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W D H
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVTTP Teardrop Pivoting Table • Attaches to a standard worksurface.• Black epoxy-coated 18 gauge “A-Frame”
steel leg with locking casters.• Falls 1” below work surface height
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVTTP3036 286 344 30 36 28
EVTTE Teardrop ExtensionTable
• Stand-alone mobile table• Shipped ready to assemble• Base available in black only
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High-Pressure Laminate
EVTTE29247 684 754 24-29 24-29 27EVTTE34307 721 793 30-34 30-34 27
EVTTE29249 711 784 24-29 24-29 29EVTTE34309 748 824 30-34 30-34 29
DESCRIPTION
EVHEP End Panel • Attaches a worksurface to a panelconnector.
• Provides solid support at the end of a runof worksurfaces.
• Finished in thermally-fused laminate.• Includes flat brackets and hardware.• End panel height is inclusive of
panel glides extended to their fullestheight.
EVHEP2924 156 29 24EVHEP2930 183 29 30
EVHEP2624 156 26 24EVHEP2630 183 26 30
EVHS Support Leg • Used in conjunction with a EVHCcantilever.
• Attaches a worksurface to a panelconnector.
• Provides extra support where needed.• May be used to support two convergent
worksurfaces.
EVHSL2918 56 25 10EVHSL2618 53 22 10
EVHSL2924 56 25 10EVHSL2624 53 22 10
EVHSR2918 56 25 10EVHSR2618 53 22 10
EVHSR2924 56 25 10EVHSR2624 53 22 10
February 1, 2007 119
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE T H W D HDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
Worksurfaces
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVHC Cantilever • Attaches a worksurface to a panelconnector.
• May be used to support two convergentworksurfaces.
• 2 flat brackets are included.• Priced individually• Specify handedness of each cantilever.
EVHC18L/R 60 6 18EVHC24L/R 69 6 24
• Provides support for a worksurface.• Includes an adjustable foot and an
attachment plate.• 3” diameter.• Available in standard paint colors.
EVHML1 126 28MonolegEVHML
Corner Brackets • Attaches the corner of any worksurfaceto a panel connector.
• Priced and shipped in pairs.• 1 Right, 1 Left
EVHCB2 15 31/2 21/2
Transaction Brackets • Securely attaches a transaction surfaceto the top of a panel.
• One pair must be on each side oftransaction surface.
• Priced and shipped in pairs.
EVHTB2 15 31/2 21/2EVHTB
EVHCB
Flat Bracket • Must be used in conjunction withcantilevers or transaction brackets toensure alignment of neighboringsurfaces.
• Priced individually
EVHFB1 9 3 4
“Z” Bracket • Used to attach two different worksurfaceheights.
• Must be used in conjunction with acantilever.
• Priced individually.
EVHZB1 35 3 17 4
DESCRIPTION
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
WorksurfacesDIMENSIONS/
PRODUCT INCHESCODE LIST PRICE W D H
120
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
EVHZB
EVHFB
EVHPB Pedestal Bracket • Attaches to back edge of a pedestal andconnects pedestal to panel connector.
EVHPB1 17 12 1 1
EVHV Single Slotted WallTrack
• To attach system components to a fixedwall. The vertical wall adapter is a “U”shaped channel with a vertical row ofslots with 1” centers.
• Mounting hardware not included.Mounting hardware selection to bebased on wall material.
• Use of wall rack requires lower tooth oftop hook on cantilever or shelf to benotched in the field.
• Available in standard paint colors.• Shipped & priced per pair.
Note:Care should be taken to mount adaptersonly to wall studs using correct fasteners.Failure to do this may result in collapse ofthe unit and subsequent possible personalinjury.
EVHV01 50 60 1/2
Laminates – Thermally FusedPlain LaminatesWillow Grey T431Storm T565Black T405New Oyster Grey T495Grey T551Constellation Java T823Taupe T427 Sahara Shell T889Cactus Star T890Desert Dusk T891Graphite Granite T899Desert Zephyr 4841-60LPCanyon Zephyr 4842-60LPLoden Zephyr 4844-60LPMisted Zephyr 4843-60LPDesigner White D354-60LPWhite Sand D403-60LPCafé Créme D456-60LPPlatinum D315-60LPPearl Bisque D485-07LPPearl Dust D488-07LPPearl Silver D487-07LPOxygen 4809-60LPTitanium 4810-60LP
Studio White Matrix MR71TLPMaroochy Brush 4745-60LPIllawarra 4806-60LPWollamai Brush 4746-60LPPewter Brush 4779-60LPMontana Walnut 7110T-60LPBrighton Walnut 7922-07LPWidsor Mahogany 7039-60LPManitoba Maple 7911-60LPClear Maple WM8340TLPRiver Cherry 7937-38LPShaker Cherry 7935-07LPMonticello Maple 7925-38LP
Wood Grain LaminatesAvant Honey* T356Avant Cherry* T357Figured Mahogany T365Quartered Mahogany* T313Tiger Walnut* T819Tiger Maple* T820Tiger Fruitwood* T821Tiger Mahogany* T822Harvest Oak T818
121
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
FS DeskingIntroduction
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
* Matching Wood Grain edge trim available.** Subject to 10% up charge.
Evolve Freestanding Chassis are available in thermally fused laminate only.
Worksurfaces are ordered separately, see Evolve Price List for pricing/model numbers.
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
122
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingFive Sided Corner Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDFSC Five Sided CornerChassis
• Five Sided Corner Chassis with 10” deepend panels for 18” & 24” deep tops and14” end panels for 30” deep tops
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDFSC3618H)
• Includes all supporting hardware
• Note:Worksurface must be ordered separately.
EVDFSC3618 499 647 36 18 29EVDFSC3624 499 647 36 24 29
EVDFSC4224 510 678 42 24 29EVDFSC4230 565 732 42 30 29
EVDFSC4824 534 725 48 24 29EVDFSC4830 590 779 48 30 29
123
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingReturn Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDRL Return - Left • Return Chassis with one full end paneland modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDRL2436H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Includes all supporting hardware
EVDRL1824 208 265 24 18 29EVDRL1830 217 282 30 18 29EVDRL1836 228 301 36 18 29EVDRL1842 239 320 42 18 29EVDRL1848 273 362 48 18 29EVDRL1854 281 376 54 18 29EVDRL1860 297 405 60 18 29EVDRL1866 302 417 66 18 29EVDRL1872 317 439 72 18 29EVDRL2424 214 272 24 24 29EVDRL2430 222 286 30 24 29EVDRL2436 235 307 36 24 29EVDRL2442 244 326 42 24 29EVDRL2448 279 368 48 24 29EVDRL2454 286 381 54 24 29EVDRL2460 302 412 60 24 29EVDRL2466 308 422 66 24 29EVDRL2472 323 445 72 24 29EVDRL3024 233 287 24 30 29EVDRL3030 240 304 30 30 29EVDRL3036 252 325 36 30 29EVDRL3042 262 344 42 30 29EVDRL3048 296 385 48 30 29EVDRL3054 303 400 54 30 29EVDRL3060 319 430 60 30 29EVDRL3066 325 440 66 30 29EVDRL3072 341 462 72 30 29
EVDRR Return - Right • Return Chassis with one full end paneland modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDRR2436H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Includes all supporting hardware
EVDRR1824 208 265 24 18 29EVDRR1830 217 282 30 18 29EVDRR1836 228 301 36 18 29EVDRR1842 239 320 42 18 29EVDRR1848 273 362 48 18 29EVDRR1854 281 376 54 18 29EVDRR1860 297 405 60 18 29EVDRR1866 302 417 66 18 29EVDRR1872 317 439 72 18 29EVDRR2424 214 272 24 24 29EVDRR2430 222 286 30 24 29EVDRR2436 235 307 36 24 29EVDRR2442 244 326 42 24 29EVDRR2448 279 368 48 24 29EVDRR2454 286 381 54 24 29EVDRR2460 302 412 60 24 29EVDRR2466 308 422 66 24 29EVDRR2472 323 445 72 24 29EVDRR3024 233 287 24 30 29EVDRR3030 240 304 30 30 29EVDRR3036 252 325 36 30 29EVDRR3042 262 344 42 30 29EVDRR3048 296 385 48 30 29EVDRR3054 303 400 54 30 29EVDRR3060 319 430 60 30 29EVDRR3066 325 440 66 30 29EVDRR3072 341 462 72 30 29
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
124
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingBridge Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDB Bridge Chassis -Modesty
• Bridge Chassis includes modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDB24H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Includes all supporting hardwareincluding interconnection plates
EVDB24 73 152 24 14/28EVDB30 80 160 30 14/28EVDB36 88 170 36 14/28EVDB42 102 194 42 14/28EVDB48 140 241 48 14/28EVDB54 156 269 54 14/28EVDB60 167 293 60 14/28EVDB66 185 320 66 14/28EVDB72 195 344 72 14/28
125
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingSupported Return Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDSRL Supported Return -Left
• Supported Return Chassis with full endpanel, mid support panel modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDSRL2436H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Note:Includes 10” mid support panel whereworksurface is 24” deep or for “D” topapplications
• Includes 14” mid support panel wherework surface is 30” deep
• Includes all supporting hardware
EVDSRL2424 301 357 24 24 29EVDSRL2430 310 374 24 30 29EVDSRL2436 320 394 24 36 29EVDSRL2442 331 414 24 42 29EVDSRL2448 364 455 24 48 29EVDSRL2454 373 469 24 54 29EVDSRL2460 389 498 24 60 29EVDSRL2466 394 510 24 66 29EVDSRL2472 409 531 24 72 29
EVDSRL3024 345 402 30 24 29EVDSRL3030 354 419 30 30 29EVDSRL3036 364 438 30 36 29EVDSRL3042 376 457 30 42 29EVDSRL3048 409 499 30 48 29EVDSRL3054 418 513 30 54 29EVDSRL3060 434 542 30 60 29EVDSRL3066 439 498 30 66 29EVDSRL3072 453 576 30 72 29
EVDSRR Supported Return -Right
• Supported Return Chassis with full endpanel, mid support panel modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDSRR2436H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Note:Includes 10” mid support panel whereworksurface is 24” deep or for “D” topapplications
• Includes 14” mid support panel wherework surface is 30” deep
• Includes all supporting hardware
EVDSRR2424 301 357 24 24 29EVDSRR2430 310 374 24 30 29EVDSRR2436 320 394 24 36 29EVDSRR2442 331 414 24 42 29EVDSRR2448 364 455 24 48 29EVDSRR2454 373 469 24 54 29EVDSRR2460 389 498 24 60 29EVDSRR2466 394 510 24 66 29EVDSRR2472 409 531 24 72 29
EVDSRR3024 345 402 30 24 29EVDSRR3030 354 419 30 30 29EVDSRR3036 364 438 30 36 29EVDSRR3042 376 457 30 42 29EVDSRR3048 409 499 30 48 29EVDSRR3054 418 513 30 54 29EVDSRR3060 434 542 30 60 29EVDSRR3066 439 498 30 66 29EVDSRR3072 453 576 30 72 29
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
126
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingSupported Bridge Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDSB Supported BridgeChassis
• Supported Bridge Chassis with two midsupport panels and modesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDSB2436H)
• Note:Worksurface must be ordered separately.Choose from Rectangular, Curved orNotched Surfaces
• Note:Includes 10” mid support panel whereworksurface is 24” deep or for “D” topapplications
• Includes 14” mid support panel wherework surface is 30” deep
• Includes all supporting hardware
EVDSB2424 235 293 24 10 29EVDSB2430 242 310 30 10 29EVDSB2436 254 330 36 10 29EVDSB2442 264 350 42 10 29EVDSB2448 298 392 48 10 29EVDSB2454 305 405 54 10 29EVDSB2460 321 436 60 10 29EVDSB2466 327 448 66 10 29EVDSB2472 342 470 72 10 29
EVDSB3024 289 347 24 14 29EVDSB3030 298 364 30 14 29EVDSB3036 308 385 36 14 29EVDSB3042 319 404 42 14 29EVDSB3048 353 446 48 14 29EVDSB3054 360 461 54 14 29EVDSB3060 376 491 60 14 29EVDSB3066 381 502 66 14 29EVDSB3072 396 525 72 14 29
127
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingRectangular Desk Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDUD Rectangular DeskChassis
• Desk Chassis with full end panels andmodesty panel
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDUD2436H)
• Note:Worksurface must be ordered separately.
• Includes all supporting hardware
EVDUD1836 377 446 36 18 29EVDUD1842 389 465 42 18 29EVDUD1848 421 508 48 18 29EVDUD1854 431 522 54 18 29EVDUD1860 445 550 60 18 29EVDUD1866 452 561 66 18 29EVDUD1872 465 583 72 18 29EVDUD1878 476 603 78 18 29EVDUD1884 482 617 84 18 29
EVDUD2436 387 461 36 24 29EVDUD2442 397 480 42 24 29EVDUD2448 432 522 48 24 29EVDUD2454 439 535 54 24 29EVDUD2460 455 564 60 24 29EVDUD2466 461 576 66 24 29EVDUD2472 476 598 72 24 29EVDUD2478 484 618 78 24 29EVDUD2484 492 632 84 24 29
EVDUD3036 421 494 36 30 29EVDUD3042 433 513 42 30 29EVDUD3048 465 555 48 30 29EVDUD3054 475 570 54 30 29EVDUD3060 489 599 60 30 29EVDUD3066 495 610 66 30 29EVDUD3072 510 633 72 30 29EVDUD3078 519 652 78 30 29EVDUD3084 525 665 84 30 29
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
128
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingExtended Corner Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDECCL Extended CornerChassis - Left
• Extended Corner Chassis with 10” or 14”deep end panel at (D’d’) and full endpanel at (D) and with half height modestypanels
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDECCL362448H)
• Note:Worksurface must be ordered separately.Use 10” End Panels where work surfaceis 18” or 24” deep. Use 14” End Panelswhere work surface is 30” deep.
• Includes all supporting hardware
• D = 24, 30”• D’d’ = 10”, 14”• W’b’ = 36”, 42” or 48”• W = 60”, 66”, 72”, 78” or 84”
EVDECCL362448 616 799 36-48 24 29EVDECCL362460 633 827 36-60 24 29EVDECCL362466 644 849 36-66 24 29EVDECCL362472 661 877 36-72 24 29EVDECCL362478 672 899 36-78 24 29EVDECCL362484 683 922 36-84 24 29
EVDECCL422460 647 851 42-60 24 29EVDECCL422466 657 874 42-66 24 29EVDECCL422472 674 903 42-72 24 29EVDECCL422478 686 926 42-78 24 29EVDECCL422484 697 949 42-84 24 29
EVDECCL423060 729 895 42-60 30 29EVDECCL423066 776 919 42-66 30 29EVDECCL423072 805 947 42-72 30 29EVDECCL423078 828 970 42-78 30 29EVDECCL423084 854 992 42-84 30 29
EVDECCL483060 767 942 48-60 30 29EVDECCL483066 814 967 48-66 30 29EVDECCL483072 840 995 48-72 30 29EVDECCL483078 865 1017 48-78 30 29EVDECCL483084 892 1039 48-84 30 29
EVDECCR Extended CornerChassis - Right
• Extended Corner Chassis with 10” or 14”deep end panel at (D’d’) and full endpanel at (D) and with half height modestypanels
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDECCL362448H)
• Note:Worksurface must be ordered separately.Use 10” End Panels where work surfaceis 18” or 24” deep. Use 14” End Panelswhere work surface is 30” deep.
• Includes all supporting hardware
• D = 24, 30”• D’d’ = 10”, 14”• W’b’ = 36”, 42” or 48”• W = 60”, 66”, 72”, 78” or 84”
EVDECCR362448 616 799 36-48 24 29EVDECCR362460 633 827 36-60 24 29EVDECC362466 644 849 36-66 24 29EVDECCR362472 661 877 36-72 24 29EVDECCR362478 672 899 36-78 24 29EVDECCR362484 683 922 36-84 24 29
EVDECCR422460 647 851 42-60 24 29EVDECCR422466 657 874 42-66 24 29EVDECCR422472 674 903 42-72 24 29EVDECCR422478 686 926 42-78 24 29EVDECCR422484 697 949 42-84 24 29
EVDECCR423060 729 895 42-60 30 29EVDECCR423066 776 919 42-66 30 29EVDECCR423072 805 947 42-72 30 29EVDECCR423078 828 970 42-78 30 29EVDECCR423084 854 992 42-84 30 29
EVDECCR483060 767 942 48-60 30 29EVDECCR483066 814 967 48-66 30 29EVDECCR483072 840 995 48-72 30 29EVDECCR483078 865 1017 48-78 30 29EVDECCR483084 892 1039 48-84 30 29
129
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W D HDESCRIPTION
FS DeskingConference Top Chassis
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDCL Conference TopChassis - Left
• Conference Top Chassis is use to supportHatchet Tps, “D” Tops and similarworksurfaces that are also supported bymono legs. Incorporates 10” deep endpanel at (D’d’) and corner leg at (D’a’) andmodesty panel at (W’b’)
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDCL3024H)
• Note:Worksurface must be ordered separately.Mono Leg is included with Hatchet TopWorksurface
• Includes all supporting hardware
• D’a’ = Corner Leg• D’b’ = 10”• W’b’ = 30”, 36”
EVDCL3024 302 379 30 24 29EVDCL3624 314 394 36 24 29
EVDCR Conference TopChassis - Right
• Conference Top Chassis is use to supportHatchet Tps, “D” Tops and similarworksurfaces that are also supported bymono legs. Incorporates 10” deep endpanel at (D’d’) and corner leg at (D’a’) andmodesty panel at (W’b’)
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDCL3024H)
• Note:Worksurface must be ordered separately.Mono Leg is included with Hatchet TopWorksurface
• Includes all supporting hardware
• D’a’ = Corner Leg• D’b’ = 10”• W’b’ = 30”, 36”
EVDCR3024 302 379 30 24 29EVDCR3624 314 394 36 24 29
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
130
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE W D HDESCRIPTION
FS DeskingHutches
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDSHF Hutch - Single Door • Desk Hutch with metal end panels,shelves and doors
• Full height back panel is thermally fusedlaminate
• Includes lock• Ships KD• Includes all supporting hardware
• Note:Optional EZ close hinges areavailable for an upcharge of $150 perdoor. Add “E” to choose option.
EVDSHF1336 703 36 13 36 3/4
EVDSHF1342 769 42 13 36 3/4
EVDSHF1348 816 48 13 36 3/4
EVDSHF1354 863 54 13 36 3/4
EVDSHF1360 908 60 13 36 3/4
EVDSHF Hutch - Double Door • Desk Hutch with metal end panels,shelves and doors
• Full height back panel is thermally fusedlaminate
• Includes lock• Ships KD• Includes all supporting hardware
• Note:Optional EZ close hinges areavailable for an upcharge of $150 perdoor. Add “E” to choose option.
EVDSHF1372 1136 72 13 36 3/4
EVDSHF1378 1177 78 13 36 3/4
EVDSHF1384 1261 84 13 36 3/4
131
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LIST INCHESCODE PRICE W D HDESCRIPTION
FS DeskingDesking Hardware
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDSCCR Modesty Inter-Connect Bracket
• Attaches two modesty panels to a midsupport panel
EVDECCR 14 121/2 4
EVDHPMPR Panel MountBracket
• Attaches modesty panel to an EvolveInline Connector
EVDHPMPR 20 13 3 31/2
EVDHPMPL 20 13 3 31/2
EVHCBR Corner Bracket • Attaches the corner of any worksurfaceto a Panel Connector
EVHCBR 8 31/2 21/2
EVHCBL 8 31/2 21/2
EVDHLB End Panel “L”Bracket
• Attaches a modesty panel to an endpanel
EVDHLB 15 12 11/2 11/2
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
132
DIMENSIONS/PRODUCT LIST INCHESCODE PRICE W D HDESCRIPTION
FS DeskingDesking Hardware
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDHMSB Mid SupportBracket
• Provides mid support for worksurfaces• Recommended for any lengths over 42”
EVDHMSB 28 71/2 71/21/2
EVDHZ “Z” Bracket • Attaches modesty panel to front edge ofend panel
• To be used when a return is attached toa rectangular desk
EVDHZ 14 121/2 1 1/2
EVHFB1 Flat Bracket • Must be used in conjunction with Midpanels to ensure alignment ofneighboring surfaces
• Three flat brackets must be used tosupport a return worksurface
EVHFB1 9 3 5
EVDHSP1 Screw Pack • 3 screws #10 x 5/8” for Pedestal toModesty Panel connection
EVDHSP1 6 5/8
133
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
February 1, 2007
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE H F W HDESCRIPTION
FS DeskingCorner Modesty Panel
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDMPCL
Half Modesty
Full Modesty
Corner ModestyPanel - Left
• Corner modesty panel connects to thecorner leg on one side, and to interconnect panel/end panel on the other.
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDMPCL36H)
• Includes all supporting hardwareincluding interconnection plates
• Tungsten Trim (TU) available at nocharge.
EVDMPCL36 88 170 36 14/28EVDMPCL42 102 194 42 14/28EVDMPCL48 140 241 48 14/28EVDMPCL54 156 269 54 14/28EVDMPCL60 167 293 60 14/28EVDMPCL66 185 320 66 14/28EVDMPCL72 195 344 72 14/28
EVDMPCR Corner ModestyPanel - Right
• Corner modesty panel connects to thecorner leg on one side, and to interconnect panel/end panel on the other.
• Note:Add either “H” (half modesty) of “F” (fullmodesty to the end of the product code.(i.e. EVDMPCR36H)
• Includes all supporting hardwareincluding interconnection plates
• Tungsten Trim (TU) available at nocharge.
EVDMPCR36 88 170 36 14/28EVDMPCR42 102 194 42 14/28EVDMPCR48 140 241 48 14/28EVDMPCR54 156 269 54 14/28EVDMPCR60 167 293 60 14/28EVDMPCR66 185 320 66 14/28EVDMPCR72 195 344 72 14/28
Half Modesty
Full Modesty
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
134
DIMENSIONS/PRODUCT LAMINATE LIST INCHESCODE W HDESCRIPTION
FS DeskingRectangular Desk Shell
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDEP End Panel • Supports worksurface• Includes two end panel brackets, and
two levelling glides• Must be ordered left or right• End panel height is inclusive of
panel glides extended to their fullestheight.
• Tungsten Trim (TU) available at nocharge.
EVDEPL2924 165 24 28EVDEPL2930 182 30 28EVDEPL2624 148 24 26EVDEPL2630 172 30 26
EVDEPR2924 165 24 28EVDEPR2930 182 30 28EVDEPR2624 148 24 26EVDEPR2630 172 30 26
EVDCP Central SupportPanel
• Supports and connects 2 worksurfaces• Includes two end panel brackets, two
levelling glides and modesty interconnect bracket (EVDECCR)
• Attaches to modesty panel• Tungsten Trim (TU) available at no
charge.
EVDCP2910 99 10 28EVDCP2914 126 14 28EVDCP2610 88 10 26EVDCP2614 118 14 26
Free StandingEVDTB Tack Board - Hutch• Provides a tackable surface for notes and
memos in work area.• Includes two pairs of hutch mounted
brackets.• Fabric must be specified.
Double Tack Board - Hutch• Includes 2 seperate tack boards that are
mounted side-by-side to make up totallength.
• Provides a tackable surface for notes andmemos in work area.
• Includes mounting hardware.• Fabric must be specified.
EVDTB1836 183 189 18 35EVDTB1842 209 217 18 42EVDTB1848 234 242 18 48EVDTB1854 258 268 18 54EVDTB1860 283 295 18 60
EVDTB1872 365 376 18 35EVDTB1878 391 404 18 38EVDTB1884 417 433 18 41
February 1, 2007 135
Storage Tips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Many components make up a configuration. This page provides a three dimensional view of a sample configuration highlighting each storagecomponent required when specifying this configuration.
Components
A. EVSBBF24LP Box, Box, File Pedestal
B. EVSSL Low-Profile Shelf
C. EVSOF Overhead Flipper Door Storage Unit
A
B
C
136
Storage Tips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
Interior Clear Opening Height Dimensions
"B" Opening "L" OpeningFixed Front Drawer 13" Fixed Front Drawer 10 7/8"Receding Door and Roll-Out Shelf 12 1/8" Receding Door and Roll-Out Shelf 10"Receding Door and Fixed Shelf 12" Receding Door and Fixed Shelf 9 7/8"Fixed Shelf and no Receding Door 12 3/4" Fixed Shelf and no Receding Door 10 5/8"
"B" and "L" OpeningDrawer – Depth 15 3/4"Roll-Out Shelf – Depth 15 3/4"Fixed Shelf – Depth 15 3/4"
Interior Clear Opening Width Dimensions and Filing Capacity
30" Wide Cabinet 36" Wide CabinetFixed Front Drawer 26 9/16" Fixed Front Drawer 32 9/16"Receding Door and Roll-Out Shelf 26 9/16" Receding Door and Roll-Out Shelf 32 9/16"Receding Door and Fixed Shelf 26 3/16" Receding Door and Fixed Shelf 32 3/16"
42" Wide CabinetFixed Front Drawer 38 9/16"Receding Door and Roll-Out Shelf 38 9/16"Receding Door and Fixed Shelf 38 3/16"
Opening Capacities30" Wide Units
Letter
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
Legal
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
EDP
"B" OpeningFixed Front Drawer ONLY
Capacity — 26 9/16”
Accessories required HFB30Capacity — 31 1/2”
Accessories required HFB30 and one pair of FBBNot recommended for “L” openings with roll-out shelves
Capacity — 26 9/16”
Accessories required HFB30
Capacity — 26 9/16”
Accessories required HFB30 and one pair EDPS
Capacity — 26 5/16”
Accessories required HFB30 and one pair FBBNot recommended for “L” openings with roll-out shelves
137
Storage Tips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
Opening Capacities36" Wide Units
Letter
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
Legal
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
EDP
"B" OpeningFixed Front Drawer ONLY
Opening Capacities42" Wide Units
Letter
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
Legal
"B" and "L" OpeningsFixed Front Drawers andRoll-Out Shelves
EDP
"B" OpeningFixed Front Drawer ONLY
Capacity – 32 9/16"Accessories required HFB36
Capacity – 31 1/2"Accessories required HFB36 and one pair of FBBNot recommended for "L" openings with roll-out shelves
Capacity – 32 9/16"Accessories required HFB36
Capacity – 32 9/16"Accessories required HFB36 and one pair EDPS
Capacity – 31 1/2"Accessories required HFB36 and one pair of FBBNot recommended for "L" openings with roll-out shelves
Capacity – 38 9/16"Accessories required HFB42
Capacity – 47 1/4"Accessories required HFB36 and one pair of FBBNot recommended for "L" openings with roll-out shelves
Capacity – 38 9/16"Accessories required HFB42
Capacity – 38 9/16"Accessories required HFB42 and one pair EDPS
Capacity – 31 1/2"Accessories required HFB36 and one pair of FBBNot recommended for "L" openings with roll-out shelves
138
Storage Tips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
Lateral File Features
Lateral Files
• Binder storage• EDP storage (with optional EDP sides)• Limited Lifetime Warranty (see Terms & Conditions)
Drawers/Shelves
• Drawer interlocking system• Three-stage, anti-bounceback suspension• Pre-installed file bars• Side-to-side file bars for letter, legal and A4• Front-to-back file bars – optional• Fixed front drawers – available• Receding door, roll-out shelves – available• Slotted, pull-out shelves with rolled edge • Full-height dividers – optional• Looped full pull• Label holder
Lateral Files 9200 Series
• Receding door series features 16 gauge, spring loaded hinges• Premium drawer slides with black zinc coating for smoother,
quieter motion.• Superior locking system with anti-lift mechanism.• Mig welded top corners.• Salt spray resistance treatment.• Durable epoxy powder coating.• Thicker receding door with redesigned pivot motion to prevent door rub.• Interchangeable drawer front option.• Large standard color palette. • Half height drawers optional.• ANSI / BIFMA approved.• CSGB approved.
Construction
• Top stiffener bar.• Corner gussets.• 18 – 20 gauge cold-rolled steel.• Four (4) ganging knockout positions are marked to ensure correct
positioning.• Cam lock included.• Leveling glides.• Counterweights are recommended in all heights/widths – optional.
February 1, 2007 139
Storage Tips
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Standard Paint Colors
Additional Standard Colors (for storage items only)
Premium colors are available.** A 5% charge will be applied for color matching on order of 15 units or less.
There is no charge for color matching on orders of 16 units or more.• Minimum of 5 pieces must be ordered.
Evolve ColorsBLK BlackCGR Charcoal GreySIL SilverTPE Taupe
TUN Tungsten (Please note there is a 10% upcharge for this selection
Global ColorsDPT Desert PuttyTSA Tahiti SandLGR Light Grey
BGR Business GreyGRY GreyNEV Nevada Beige
Premium Colors
CHA ChampagneBLH BlushSPH SapphireF01 WildroseF02 AquaF03 JuteF04 ShakerF05 MossF06 PeriF07 MetroF08 MintF09 ClaretF10 PortF11 RussetF12 YamF13 AubergineF14 BerryF15 OliveF16 StrawF17 StormF18 JadeF19 NavyF20 HunterF21 CactusF22 AzureF23 CloudF24 Sage
F25 HummusF26 KraftF27 SisalF28 WillowF29 BoneF30 IvoryF31 BirchF32 StoneF33 IceF34 AshF35 OysterF36 SlateF37 BalticF38 ThunderF39 BarkF40 Cocoa
EVSOF Overhead Flipper DoorStorage Unit
• Ready for quick assembly on site.• Quality steel construction.• 60” unit is reinforced for proper weight
distribution.• Inside dimensions: 12” high x 11 3/4”
deep.
• Note: Lock not included (see listingbelow).
EVSOF1224 273 141/2 12 24EVSOF1230 282 141/2 12 30EVSOF1236 314 141/2 12 36EVSOF1242 345 141/2 12 42EVSOF1248 376 141/2 12 48EVSOF1260 439 141/2 12 60
EVSOF Full Pull Overhead Flipper Door StorageUnit
• Ready for quick assembly on site.• Quality steel construction.• Inside dimensions: 13 1/4” high x 12 3/4”
deep.
• Note: Includes lock
EVSOF1324 366 16 141/2 24EVSOF1330 372 16 141/2 30EVSOF1336 384 16 141/2 36EVSOF1342 404 16 141/2 42EVSOF1348 431 16 141/2 48EVSOF1360 480 16 141/2 60
EVSOF 17” Overhead FlipperDoor Storage Unit
• Ready for quick assembly on site.• Quality steel construction.• Inside dimensions: 15” high x 13” deep.• Soft close option
• Note: Lock not included (see listingbelow).
EVSOF1724 877 17 141/2 24EVSOF1730 907 17 141/2 30EVSOF1736 952 17 141/2 36EVSOF1742 1001 17 141/2 42EVSOF1748 1064 17 141/2 48
EVSLK Lock for OverheadFlipper Door StorageUnit
• Includes lock and two keys for OverheadFlipper Door Storage Unit.
• Field Installed• For 1200 & 1700 Series Overhead Flipper
Door Units
EVSLK12 32
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
140
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007 141
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVSOF Overhead Flipper DoorStorage Unit - FullyAssembled
• Completely enclosed, fully assembled.Built with metal sides and back, fullyretractable metal door.
• 16” deep units accommodate letter, legalend tab binder, EDP and AA metric filing.
• All cabinets 36” and longer arereinforced for proper weight distribution.
• Mounting bracket included.• Lock with two keys provided.• Lock secured into bottom shelf.• Inside dimensions: 135/8” high x 143/4”
deep.
EVSOF1624 487 171/2 16 24EVSOF1630 500 171/2 16 30EVSOF1636 525 171/2 16 36EVSOF1642 558 171/2 16 42EVSOF1648 594 171/2 16 48EVSOF1654 628 171/2 16 54EVSOF1660 655 171/2 16 60
EVSOIB International OverheadBack Wall
• Metal back wall attaches to EVSOF17overhead to provide interior security.
• Can be field installed or retrofitted.
EVSOIB24 39 17 1/2 24EVSOIB30 45 17 1/2 30EVSOIB36 51 17 1/2 36EVSOIB42 58 17 1/2 42EVSOIB48 64 17 1/2 48
EVSOB Overhead Back Wall • Metal back wall attaches to EVSOF12overhead to provide interior security.
• Can be field installed or retrofitted.
EVSOB24 37 14 1/2 24EVSOB30 42 14 1/2 30EVSOB36 49 14 1/2 36EVSOB42 56 14 1/2 42EVSOB48 61 14 1/2 48EVSOB54 68 14 1/2 54EVSOB60 73 14 1/2 60
EVSOFPB Full Pull Overhead BackWall
• Metal back wall attaches to EVSOF13overhead to provide interior security.
• Can be field installed or retrofitted.
EVSOFPB24 37 14 1/2 24EVSOFPB30 42 14 1/2 30EVSOFPB36 49 14 1/2 36EVSOFPB42 56 14 1/2 42EVSOFPB48 61 14 1/2 48EVSOFPB54 68 14 1/2 54EVSOFPB60 73 14 1/2 60
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
142
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVSBF Box, File Pedestal • Freestanding• Includes one pencil tray and one plate
divider.• Lock is standard.
EVSBF19LP 348 21 19 15EVSBF23LP 358 21 23 15EVSBF29LP 368 21 29 15
EVSBBF Box, Box, File Pedestal • Freestanding• Includes one pencil tray and one plate
divider.• Used to support a worksurface.• Lock is standard.• Can be attached to a panel if Pedestal
Bracket (EVHBP1) is added. Pricedseparately; see Worksurfaces for listing.
EVSBBF19LP 395 275/8 19 15EVSBBF24LP 404 275/8 24 15EVSBBF30LP 428 275/8 30 15
EVSFF File, File Pedestal • Freestanding• Used to support a worksurface.• Lock is standard.• Can be attached to a panel if Pedestal
Bracket (EVHBP1) is added. Pricedseparately; see Worksurfaces for listing.
EVSFF19LP 395 275/8 19 15EVSFF24LP 404 275/8 24 15EVSFF30LP 428 275/8 30 15
EVSBFM Mobile Box, FilePedestal
• Mobile Pedestal• Includes one pencil tray and one plate
divider.• Includes factory-installed counterweight.• Lock is standard.
EVSBFM19LP 410 21 19 15EVSBFM23LP 420 21 23 15EVSBFM29LP 436 21 29 15
EVSBBFM Mobile Box, Box, FilePedestal
• Mobile Pedestal• Includes one pencil tray and one plate
divider.• Includes factory-installed counterweight.• Lock is standard.
EVSBBF19LPM 467 275/8 19 15EVSBBF24LPM 478 275/8 24 15EVSBBF30LPM 499 275/8 30 15
EVSFFM Mobile File, FilePedestal
• Mobile Pedestal• Includes factory-installed counterweight.• Lock is standard.
EVSFF19LPM 467 275/8 19 15EVSFF24LPM 478 275/8 24 15EVSFF30LPM 499 275/8 30 15
EVSBFC Mobile Box, FilePedestal with Cushion
• Mobile Pedestal• 2 1/2” foam cushion in panel or seating
fabric up to Grade 4.• Includes one pencil tray and one plate
divider.• Includes factory-installed counterweight.• Lock is standard.• Overall height includes cushion.
EVSBFC19LP 547 231/2 19 15EVSBFC23LP 561 231/2 23 15EVSBFC29LP 586 231/2 29 15
February 1, 2007 143
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
144
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVST4H Storage Tower (2 File) Four High
• Four high tower with two file drawers,one storage compartment with one fixedand one adjustable shelf on 2”increments, and one coat locker withcoat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST4H2F2SL 1702 54 24 24EVST4H2F2SR 1702 54 24 24
EVST4H Storage Tower (2 File/1 Box) Four High
• Four high tower with two box drawers intop position, one file drawer in bottomposition, one storage compartment withone fixed and one adjustable shelf on 2”increments, and one coat locker withcoat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST4H2B2SL 1702 54 24 24EVST4H2B2SR 1702 54 24 24
*Left Shown
*Left Shown
EVSR5H2 Storage Tower(2 File) Five High
• Five high tower with two file drawers,one storage compartment with one fixedand one adjustable shelf on 2”increments, and one coat locker withcoat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST5H2F2SL 1752 65 1/4 24 24EVST5H2F2SR 1752 65 1/4 24 24
*Left Shown
February 1, 2007 145
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVST5H Storage Tower(2 Box/1 File) Five High
• Five high tower with two box drawers inthe top position, one file drawer in thelower position, one storage compartmentwith one fixed and one or two adjustableshelves on 2” increments, and one coatlocker with coat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST5H2B1SL 1752 65 1/4 24 24EVST5H2B1SR 1752 65 1/4 24 24
EVST5H Storage Tower(2 Box/2 File) Five High
• Five high tower with two box drawers inthe top position, tow file drawers in thebottom position, one storagecompartment with one fixed and one ortwo adjustable shelves on 2”increments, and one coat locker withcoat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST5H2B2SL 1815 65 1/4 24 24EVST5H2B2SR 1815 65 1/4 24 24
*Left Shown
*Left Shown
EVST5H Storage Tower(3 File) Five High
• Five high tower with three file drawers,one storage compartment with one fixedand one or two adjustable shelves on 2”increments, and one coat locker withcoat rod.
• Towers come with one lock each for filedrawers, storage cabinet and coat locker.
• Locks are keyed alike.
EVST5H3F2SL 1815 65 1/4 24 24EVST5H3F2SR 1815 65 1/4 24 24
*Left Shown
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
146
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVSPD Pencil Drawer • Accommodates writing instruments andsmall items.
• Attaches to the underside of aworksurface.
• Available in black plastic only.
EVSPD2015 83 11/2 15 221/2
EVSSL Low-Profile Shelf • 12” deep panel-mounted storage shelfwith back lip that protects fabric.
• Includes attachment hardware.
EVSSL1224 73 5 12 24EVSSL1230 79 5 12 30EVSSL1236 86 5 12 36EVSSL1242 89 5 12 42EVSSL1248 94 5 12 48EVSSL1260 101 5 12 60
EVSSC Corner Shelf Kit • Used in conjunction with a Low ProfileShelf.
• Includes handed corner side panel, flatbracket and hardware.
• Corner shelf must be specified 12”smaller than panel width.
EVSSC1224L 67 5 12 24EVSSC1230L 70 5 12 30EVSSC1236L 73 5 12 36EVSSC1224R 67 5 12 24EVSSC1230R 70 5 12 30EVSSC1236R 73 5 12 36
EVSOH High-Profile Shelf • 12” deep panel-mounted storage shelfwith back lip that protects fabric.
• Includes attachment hardware.
EVSOH1224 145 14.5 12 24EVSOH1230 161 14.5 12 30EVSOH1236 170 14.5 12 36EVSOH1242 175 14.5 12 42EVSOH1248 180 14.5 12 48EVSOH1260 189 14.5 12 60
147
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
EV92__P-2F1H
Two-high Lateral File • Looped full pull.• Two fixed front drawers.• Side-to-side file bars included.• Lock included.• Bottom position cannot be converted to
receding door.• Worksurface supporting
EV9230P-2F1H 586 275/8 18 30EV9236P-2F1H 611 275/8 18 36EV9242P-2F1H 678 275/8 18 42
EV92__P-3F1H
Three-high Lateral File • Looped full pull.• Three fixed front drawers.• Side-to-side file bars included.• Lock included.• Bottom position cannot be converted to
receding door.
EV9230P-3F1H 735 401/2 18 30EV9236P-3F1H 815 401/2 18 36EV9242P-3F1H 884 401/2 18 42
EV92__P-4F1H
Four-high Lateral File • Looped full pull.• Four fixed front drawers.• Side-to-side file bars included.• Lock included.• Bottom position cannot be converted to
receding door.
EV9230P-4F1H 969 54 18 30EV9236P-4F1H 1022 54 18 36EV9242P-4F1H 1144 54 18 42
EV92__P-5F1H
Five-high Lateral File • Looped full pull.• Four fixed front drawers.• Top drawer opening with receding door
and roll-out shelf.• Side-to-side file bars included.• Lock included.• Bottom position cannot be converted to
receding door.
EV9230P-5F1H 1225 651/4 18 30EV9236P-5F1H 1288 651/4 18 36EV9242P-5F1H 1426 651/4 18 42
B
L
B
B
L
B
B
L
B
B
L
L
B
L
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
148
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
EV92__P-2S1_
Two-high StorageCabinet
• Two-door storage cabinet.• Hinged doors• 2S1 includes shelves.• 2S1E does not include shelves.
EV9230P-2S1 761 271/8 18 30EV9236P-2S1 832 271/8 18 36EV9242P-2S1 891 271/8 18 42
EV9230P-2S1E 718 271/8 18 30EV9236P-2S1E 779 271/8 18 36EV9242P-2S1E 832 271/8 18 42
EV92__P-3S1_
Three-high StorageCabinet
• Two-door storage cabinet.• Hinged doors• 3S1 includes shelves.• 3S1E does not include shelves.
EV9230P-3S1 912 401/2 18 30EV9236P-3S1 1001 401/2 18 36EV9242P-3S1 1092 401/2 18 42
EV9230P-3S1E 824 401/2 18 30EV9236P-3S1E 898 401/2 18 36EV9242P-3S1E 972 401/2 18 42
EV92__P-4S1_
Four-high StorageCabinet
• Two-door storage cabinet.• Hinged doors• 4S1 includes shelves.• 4S1E does not include shelves.
EV9230P-4S1 1056 54 18 30EV9236P-4S1 1159 54 18 36EV9242P-4S1 1267 54 18 42
EV9230P-4S1E 924 54 18 30EV9236P-4S1E 1005 54 18 36EV9242P-4S1E 1088 54 18 42
EV9236P-2S1 EV9236P-2S1E
EV9236P-3S1 EV9236P-3S1E
EV9236P-4S1 EV9236P-4S1E
EV92__P-5S1_
Five-high StorageCabinet
• Two-door storage cabinet.• Hinged doors• 5S1 includes shelves.• 5S1E does not include shelves.
EV9230P-5S1 1172 651/4 18 30EV9236P-5S1 1292 651/4 18 36EV9242P-5S1 1415 651/4 18 42
EV9230P-5S1E 996 651/4 18 30EV9236P-5S1E 1084 651/4 18 36EV9242P-5S1E 1176 651/4 18 42
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
149
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
EV9236P-5S1 EV9236P-5S1E
EV92__P-5W1
Five-high WardrobeCabinet
• Two-door wardrobe cabinet.• Hinged doors• One full-width, non-slotted fixed shelf.• Front-to-back coat rod and four hat
shelves on left side.
EV9230P-5W1 1172 651/4 18 30EV9236P-5W1 1387 651/4 18 36EV9242P-5W1 1509 651/4 18 42
EV92__P-4MSL
Four-high Cabinet • Two-high storage, two high lateral.• One B and one L opening.• One adjustable shelf, two locks (keyed
alike), two sets of side-to-side file barsand counterweights included.
EV9230P-4MSL 1436 54 18 30EV9236P-4MSL 1647 54 18 36EV9242P-4MSL 1776 54 18 42
EV92__P-5MSL
Five-high Cabinet • Three-high storage, two high lateral.• One B and one L opening.• Two adjustable shelves, two locks (keyed
alike), two sets of side-to-side file barsand counterweights included.
EV9230P-5MSL 1602 651/4 18 30EV9236P-5MSL 1824 651/4 18 36EV9242P-5MSL 1975 651/4 18 42
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
150
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
Divider PlatesEVS_PD
EVSLAB Legal-to-letter Adapter
Front-to-back BarsEVSFBB
EVSHFB Hanging File Bars • Used in lateral files only.• Available in black only.
EVSHFB30 27 30EVSHFB36 27 36EVSHFB42 27 42
• Cross file bars.• Used in lateral files only.• Available in black only.• Shipped in pairs.
EVSFBB 13 121/4
• Used in lateral files only.• Available in black only.
EVSLAB30 13 30EVSLAB36 13 36EVSLAB42 13 42
• Used in full-height shelves and drawers.• Three plates per package.• Used in lateral files only.• Available in black only.
F = Full-height dividerH = Half-height divider
EVSHPD03 30 102 330EVSFPD03 30 178 330
February 1, 2007 151
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVAPDIV Pedestal Divider Plates • Priced and shipped individually. EVAPDIV 16 12 4
EVT Lateral File Tops Made of 1 1/6” thick particle board withlaminate finish. Tops are 3.5mm edgebanded.
Note the following abbreviations:• T = Thermally-Fused Laminate• H = High Pressure Laminate
• Tungsten Trim (TU) available at nocharge.
T HEVT1830 91 127 30 18 1EVT1836 105 144 36 18 1EVT1842 124 190 42 18 1EVT1860 172 290 60 18 1EVT1872 204 327 72 18 1EVT1884 278 374 84 18 1EVT1890 300 407 90 18 1EVT18108 373 502 108 18 1
Note: Available in standard Evolve finishes. See page 9. Please specify.Other configurations are possible. Please contact your Customer Service representative.
152
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
ERRC Receding DoorConversion
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
EFFD Fixed DrawerConversion
Fixed front drawer conversion in “B” of “L”openings from receding door and roll-outshelf.* No charge for conversion at time oforder. Must be factory installed.
Note: Fixed shelf can be substituted for aroll-out shelf in a receding opening at noextra charge at time of order.
Please specify all substitutions and options.
EFFD30 0 30EFFD36 0 36EFFD42 0 42
92P-BHHD Half Height Drawers Half height drawers. For 30”, 36” or 42”“B” opening, specify 92P-BHHD_. For 30”,36” or 42” “L” opening, specify 92P-LHHD_.One pair. Must be factory installed.*
92P-BHHD30 223 3092P-BHHD36 240 3692P-BHHD42 256 42
92P-LHHD30 223 3092P-LHHD36 240 3692P-LHHD42 256 42
Receding door and roll-out shelf conversionin “B” or “L” openings from a fixed frontdrawer.* (Add list price to each openingbeing converted at time of order.) Must befactory installed.
ERRC30 47 30ERRC36 47 36ERRC42 47 42
EFSC30 47 30EFSC36 47 36EFSC42 47 42
92PPS Posting Shelf Posting shelf. Available in five drawer highcabinets. Factory installed between secondand third openings.
Please specify all subsitutions and options.
92PPS30 47 3092PPS36 52 3692PPS42 58 42
Receding door and fixed slotted shelfconversion in “B” or “L” openings from afixed front drawer.* (Add list price to eachopening being converted at time of order.)Must be factory installed.
153
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H D WDESCRIPTION
Storage Lateral File Component Conversion Optioins
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
EVSEDPS
EVSCWB
EVS__ Additional & MasterKeys
EDP Adapter • Not recommended for use in recedingfront drawers.
• “B” opening only.• Black only.
EVSEDPS 28 3 161/2
Counterweight Balance • Recommended for use in all laterals.• Black only.• Must be factory installed
EVSCWBLAT2H 251EVSCWBLAT3H 251EVSCWBLAT4H 165EVSCWBLAT5H 165
EVSCWPED 68EVSCWPEDF 126
• AK — Additional key (specify at time oforder).
• MK — Master key.• EK — Extra key for existing cabinets
(specify core number).• CK — Core key.• LOCKKEY — Core and key.
EVSAK92 7EVSMK92 19EVSEK92 7EVSCK92 19EVLOCKKEY 25
February 1, 2007154
W401 Lateral Files Storage Files KD Storage Key Area Checkedto Vertical Files Total Total
W550 PedestalsInclusive Overheads
Initiated by Add on Original PO#
Date GLOBAL PO# Ack.No. (Provided by Contract) Page of
Quantity Quantity Quantity Quantity Print Initials
KEY NO. TAG AREA CATEGORY ONE CATEGORY TWO CATEGORY THREE CONTRACT USE ONLY
Customer PO#
Special Instructions :
Storage EVOLVE Key-Alike Form
NOTE : If Key Alike Instructions are not submitted to EVOLVE with the Customer’s Purchase Order, all components will be keyed randomly.To order storage, please specify: Model number, finish color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Storage Tips at the beginning of the section for further details
February 1, 2007 155
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
AccessoriesPanel Hanging
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVATB Tack Board • Provides a tackable surface for notes andmemos in a work area.
• Includes two pairs of panel-mountingbrackets.
• Only fabric must be specified.• 17” to be installed under EVSOF13 _ _ or
EVSOF16 _ _ overhead flipper door unit.• 21” specified for use under overhead
shelf or storage bin.• 24” for use without any overheads.
EVATB1730 171 176 17 30EVATB1736 194 200 17 36EVATB1742 221 228 17 42EVATB1748 247 254 17 48EVATB1754 274 284 17 54EVATB1760 300 309 17 60
EVATB2124 157 162 21 24EVATB2130 171 177 21 30EVATB2136 194 201 21 36EVATB2142 221 229 21 42EVATB2148 248 257 21 48EVATB2154 273 284 21 54EVATB2160 300 312 21 60
EVATB2430 171 177 24 30EVATB2436 194 201 24 36EVATB2442 221 230 24 42EVATB2448 248 258 24 48EVATB2454 273 285 24 54EVATB2460 300 311 24 60
EVAWB White Marker Board • Provides a writing surface within a workarea.
• Includes two pairs of panel-mountingbrackets.
• 21” specified for use under overheadshelf or storage bin.
• 24” for use without any overheads.
EVAWB2130 182 21 30EVAWB2136 206 21 36EVAWB2142 231 21 42EVAWB2148 269 21 48
EVAWB2430 182 24 30EVAWB2436 206 24 36EVAWB2442 231 24 42EVAWB2448 269 24 48
EVAMT Marker Tray • Provides a tray for storage of markers,erasers, etc.
• Attaches to the bottom of the WhiteMarker Board.
• Available in chrome only.
EVAMT12 9 12
Half Width - TackBoard - Hutch
• Tack Board is to be mounted on the backwall of the FS Hutch (EVDSHF13).
• Designed to cover only half width of theback wall.
• Use EVDTB18 Tack Boards to cover thewhole back wall of the FS Hutch.
• Provides a tackable surface for notes andmemos in working area.
• Includes two pairs of hutch mountingbrackets.
• Fabric must be specified.• Tack board may be used in conjuction
with EVALB2-H.
EVDTB18-H18 151 155 18 17EVDTB18-H21 154 157 18 20EVDTB18-H24 157 161 18 23EVDTB18-H27 164 169 18 25EVDTB18-H30 171 176 18 29EVDTB18-H36 194 200 18 35EVDTB18-H39 207 216 18 38EVDTB18-H42 221 229 18 41
Half Width - GangingLoad Bar - Hutch
• Ganging Load Bar is to be mounted onthe back wall of the FS Hutch(EVDSHF13)
• To be used in conjunction with EVDTB18-H Tack Board
• Load Bar enables accessory items to behung off it.
• Priced per unit.• 9 Ganging Load Bars will match
EVDTB18-H ful height.
EVALB2-H18 44 18EVALB2-H21 47 21EVALB2-H24 48 24EVALB2-H27 50 26EVALB2-H30 51 30EVALB2-H36 55 36EVALB2-H39 57 39EVALB2-H42 58 42
Ganging Load Bar -Hutch
• Tack Board is to be mounted on the backwall of the FS Hutch (EVDSHF13).
• Load Bar enables accessory items to behung off it.
• Designed to cover the full width of theback wall of the FS Hutch (EVDSHF13).
• Do not use in conjunction with the TackBoards.
EVALB2-436 73 21/4 36EVALB2-442 78 21/4 42EVALB2-448 82 21/4 48EVALB2-454 86 21/4 54EVALB2-460 89 21/4 60EVALB2-472 98 21/4 72EVALB2-478 101 21/4 78EVALB2-484 104 21/4 84
Overhead Divider -Hutch
• Attaches to overhead top shelf inside theFS hutch.
• Provides rigid division for books andbinders.
EVDSHD01 39 10 3/16
February 1, 2007
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
156
LIST PRICE DIMENSIONS/PRODUCT FABRIC INCHESCODE Gr1 Gr2 H W DDESCRIPTION
AccessoriesPanel Hanging
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVDTB18-H
EVALB2-H
EVALB2-4
EVDSHD01
EVALB Load Bar • Enables accessory items to be hung froma panel.
• Includes end caps and mountingbrackets.
• Can be panel or wall mounted.• Must specify finish.
EVALB24 87 24EVALB30 97 30EVALB36 105 36EVALB42 122 42EVALB48 141 48EVALB54 152 54EVALB60 162 60
Load Bar - Top • Enables accessory items to be hung froma panel.
• Includes end caps and mountingbrackets.
• Can be panel mounted.• Can connect to EVALB2-2 and/or
EVALB2-3 Load Bars to create a multi-level load bar or “Slat Wall”
• Note: can be used on its own.
EVALB224 69 21/4 24 1EVALB230 73 21/4 30 1EVALB236 78 21/4 36 1EVALB242 81 21/4 42 1EVALB248 84 21/4 48 1EVALB260 91 21/4 60 1
Load Bar - Bottom • Enables accessory items to be hung froma panel.
• Includes end caps and mountingbrackets.
• Can be panel mounted.• Connects between EVALB2-2 and
EVALB2-3 Load Bars to create a multi-level load bar or “Slat Wall”
• Note: Needs to be used in conjunctionwith an EVALB2 or a combination ofEVALB2 and EVALB2-2
EVALB2-324 67 21/4 24 1EVALB2-330 70 21/4 30 1EVALB2-336 73 21/4 36 1EVALB2-342 78 21/4 42 1EVALB2-348 82 21/4 48 1EVALB2-354 86 21/4 54 1EVALB2-360 89 21/4 60 1
EVSOFD Overhead Divider • Attaches to overhead top shelf inside theoverhead
• Provides rigid divisioin for books andbinders.
EVSOFD01 39 147 21 30
Load Bar - Middle • Enables accessory items to be hung froma panel.
• Includes end caps and connecting pins.• Can be panel mounted.• Connects between EVALB2-1 and
EVALB2-3 Load Bars to create a multi-level load bar or “Slat Wall”
• Note: Needs to be used in conjunctionwith both EVALB2 and EVALB2-3.Multiples of EVALB2-2 can be joined,one below the other, to create a “SlatWall”
EVALB2-224 48 21/4 24 1EVALB2-230 51 21/4 30 1EVALB2-236 55 21/4 36 1EVALB2-242 58 21/4 42 1EVALB2-248 61 21/4 48 1EVALB2-254 67 21/4 54 1EVALB2-260 70 21/4 60 1
February 1, 2007 157
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order worksurfaces, please specify: Model number, laminate (thermally-fused or high prressure), edge trim color.Complete ordering guidelines and finish listings can be found in the Introduction section. Please see Worksurface Tips at the beginning of the section for further details.
AccessoriesPanel Hanging
Evolve Customer Support available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVALB2-2
EVALB2
EVALB2-3
EVAO11 Binder Bin • Must be ordered in conjunction with aload bar option.
EVAO11 87 9 4 101/4
EVAO12 Letter Tray • Must be ordered in conjunction with aload bar option.
EVAO12 61 2 131/2 91/4
EVAO13 Slanted Sorter • Must be ordered in conjunction with aload bar option.
EVAO13 57 91/2 5 101/4
EVAO14 Media Bin • Must be ordered in conjunction with aload bar option.
EVAO14 75 3 53/4 51/4
EVAO15 Utility Tray • Must be ordered in conjunction with aload bar option.
EVAO15 57 1 81/2 33/4
EVAO16 Flip Sorter • Must be ordered in conjunction with aload bar option.
EVAO16 81 91/4 21/4 91/4
February 1, 2007
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
158
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
AccessoriesLoad Bar Hanging
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
159
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
Accessories
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVANP Name Plate • Insterts into slots on Inline Connector.• Metal construction with plastic cover.• Can be mounted left or right.• Slide-in name card not included.• Available in standard paint colors.• Name tag is not included• Standard Black• All colors available• No upcharge for quantity• 10% upcharge for tungsten
EVANP01 39 23/4 6
EVACH Coat Hook • Insterts into slots on Inline Connector.• Available in standard paint colors.
EVACH01 29
EVWAPS Printer Slot • Printer Slot can be factory retrofit. Ifrequired, indicate location:WPS1 = 7” from left end, 2” from backWPS2 = Center, 2” from backWPS3 - 7” from right end, 2” from back
• There is an upcharge for factoryretrofitting: add $32.
• Available in black only.
EVWAPS1 23 1.5 17 1.5
EVSPD Pencil Drawer • Accommodates writing instruments andsmall items
• Attaches to the underside of a worksurface
EVSPD2015 23 11.5 22.5 15
February 1, 2007
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
160
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
AccessoriesFreestanding
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EVAES Easel • Double-sided whiteboard for use withdry erase marker.
• Two epoxy-coated 18 gauge steel A-frame legs with locking casters.
• PVC tray holds markers and erasers.• Also suitable for use as a presentation
screen or privacy screen.• Legs are available in black only.
EVAES29 524 651/2 29 25EVAES36 683 651/2 36 25
EVATP Touch-Up Paint Kit • Available in standard Evolve paint colorsto facilitate easy touch-ups.
• 1/2 fl. ounce bottle (spray not available).• Specify color.
EVATP01 9
February 1, 2007 161
DIMENSIONS/PRODUCT INCHESCODE LIST PRICE H W DDESCRIPTION
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
AccessoriesWorksurface
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
CRT Corner PlateEVWACP • Converts two abutting worksurfaces in a90º corner into a 45º angle keyboardworksurface.
• Keyboard mechanism not included.• Color must be specified. *
EVWACP1818 59 11/8 18 18
EVCPU CPU Holder • CPU holder with soft touch knob.• Vertical underside storage space.• Maintains CPU at set height.• Inside width adjustment 31/2” — 91/4”• Inside vertical adjustment 121/2” — 221/2”• Load rating: 85lbs.• Available in black only.
EVCPU01 192 14 81/4 73/4
EVWAK1 Adjustable KeyboardClamp & Palm Rest
• Full length gel-foam wrist rest.• 61/2” height adjustment.• Meets or exceeds ANSI/BIFMA
standards.• Available in black only.
EVWAK1 219 7 24 10
EVWAK3A Sit/Stand AdjustableKeyboard Tray & MouseTray
• 26” wide metal keyboard tray.• Full length gel-foam wrist rest.• Anti-skit mat and vinyl cover for mousing.• 12.2” height adjustment (6.2” above/6”
below).• Meets or exceeds ANSI/BIFMA
standards.• Available in black only.
Note: this product replaces EVWAK3
EVWAK3A 462 7 26 10
February 1, 2007
To order accessories, please specify: Model number.Complete ordering guidelines and finish listings can be found in the Introduction section.
162
Notes
Evolve Customer Suppor available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
February 1, 2007
SeatingTips
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
The information listed below provides you with basic information about Evolve seating.
Arlington Seating
• Fire retardant foam is used on all seats and backs.• Available in black (BK) frame only.• Available in a wide range of fabrics including Contract Leather.• COM fabric must be sent into the plant in the appropriate amount to ensure on-time delivery.
COM Material Requirements are listed for every chair.• Teardrop-shaped urethane height-adjustable arms available as an option on models EV9880 and EV9881. If this option is required, specify TD at the
time of order. Add $50.00 (list).• Standard caster C10.
Tangier Seating
• Fire retardant foam is used on all seats and backs.• Available in black (BK) frame only.• Available in a wide range of fabrics including Contract Leather.• COM fabric must be sent into the plant in the appropriate amount to ensure on-time delivery.
COM Material Requirements are listed for every chair.• Task and Multi-Tilter models are available with Vari-Width adapter plates when chair is ordered with adjustable height arms. Vari-Width allows each
arm to move outward an additional 2" (for a total of 4" extra seat width) and lock with an easy-to-use lever.If this option is required, specify WA at the time of order. Add $39.00 (list).
• Vari-Width adapter plates are available on the following chair models: EV9940-18-3, EV9940-18-5, EV9940-16-6, EV9946-16-6, EV9941-16-6, EV9947-16-6 (not identified on product pages).
• Standard caster C10.
Peligro Seating
• Fire retardant foam is used on all seats and backs.• Available in black (BK) frame only.• All chairs feature decorative seat and back stitching.• Available in a wide range of fabrics including Contract Leather.• COM fabric must be sent into the plant in the appropriate amount to ensure on-time delivery.
COM Material Requirements are listed for every chair.• Task and Multi-Tilter models are available with Vari-Width adapter plates when chair is ordered with adjustable height arms. Vari-Width allows each
arm to move outward an additional 2" (for a total of 4" extra seat width) and lock with an easy-to-use lever.• Standard caster C10.
Chatham Seating
• Fire retardant foam is used on all seats and backs.• Available in black (BK) frame only.• COM fabric must be sent into the plant in the appropriate amount to ensure on-time delivery.
COM Material Requirements are listed for every chair.• Multi-Tilter models are available with Vari-Width adapter plates. Vari-Width allows each arm to move outward an additional 2" (for a total of 4" extra
seat width) and lock with an easy-to-use lever. If this option is required, specify WA at the time of order. Add $39.00 (list).• Seat depth option available on mmodes EV9960 and EV9961. This option allows seat to move forward and backward oer a 2" range with 5 locking
positions to provide a more shallow or deeper seat. If this option is required, specify MD at the time of order. Add $62.00 (list).• Teardrop-shaped urethane height-adjustable arms available as an option on models EV9960 and EV9961. If this option is required, specify TD at the
time of order. Add $50.00 (list).• Standard caster C10.
163
February 1, 2007164
SeatingTips
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
The information listed below provides you with basic information about Evolve seating.
Zooey Mesh Seating
• The low and high back tilter hs infinite back lock control, tilt angle adjustment, pneumatic seat height adjustment, and tension control.• The low and high back synchro tilter has a sliding seat pan mechanism, infinite back lock control, tilt angle adjustment, pneumatic height adjustment
and tension control.• The synchro tilter is available in two styles; upholstered seat and mesh back, or upholstered seat and back.• Arm options available are (N1) no arms or (T6) height and width adjustable arms.• The base is standard in black or polished aluminum at a nominal up charge.• Tungsten frame is available with no upcharge on the Zooey side chair only.
February 1, 2007 165
Seating Seating Fabric Specification Sheet
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
FABRIC INFORMATION
MILL OR MANUFACTURER’S NAME:
FABRIC NAME (SERIES) & STYLE #:
FABRIC COLOR NAME AND DESCRIPTION:
FABRIC CONTENT (%COTTON, %POLY., %WOOL):
DESIGNER OR SPECIFIER OF FABRIC:
PRODUCT INFORMATION PURCHASE ORDER: __________________________
NEW FABRIC REQUEST
IF THIS IS A NEW FABRIC REQUEST, FILL OUT THIS FORM WITH YOUR ATTACHED
FABRIC SAMPLE (12”X12”) AND MAIL TO:
GLOBAL CONTRACT SEATING
ATTN: YULIA or JOE
555 PETROLIA ROAD, UNIT 1, DOORS 7, 8, 9
TORONTO, ONTARIO
CANADA M3J2X8
DATE MAILED: ______________________________
PREVIOUSLY APPROVED FABRIC
IF THIS IS A PREVIOUSLY APPROVED FABRIC, A NEW AUTHORIZATION
NUMBER MUST BE ISSUED. FAX OR MAIL THIS COMPLETED FORM TO:
EVOLVE FURNITURE GROUP
17 WEST STOW ROAD
ATTN: COM CONTACT
MARLTON, NJ 08053
FAX 856-552-4001
PREVIOUS LOG #: ______________________________
DEALER NAME: CONTACT:
BILLING ADDRESS: PHONE:
CITY: STATE: ZIP: FAX:
LOCAL GLOBAL DISTRIBUTION CENTER:
USE A SEPARATE FORM FOR EACH FABRIC REQUESTED.
Once the fabric has been approved and/or an authorization number has been issued, a set of forwarding instructions (for the fabric) will be mailed or faxed to you.DO NOT SEND ANY FABRIC WITHOUT THESE DOCUMENTS AND THE COM AUTHORIZATION NUMBER!Global is not responsible for the duty and fees for the fabric to clear customs. These charges will be billed to the dealer.
CHAIRS ORDERED WITH COM FABRIC WILL BE PRICED AT CHAIR’S LOWEST AVAILABLE FABRIC GRADE PRICE. IF QUANTITY IS LESS THAN 6, 10% UPCHARGE WILL APPLY.
Select the appropriate fabric direction:Horizontal Vertical
QUANTITY MODEL/FRAME COLOR OPTIONS FABRIC DIRECTION - HORIZONTAL/VERTICAL
February 1, 2007166
Seating Seating Fabric SampleSend completed form to:EVOLVE Furniture Group 555 Petrolia Road, Unit 1, Doors 7, 8, 9 Toronto, Ontario M3J2X8Attn: Yulia or Joe
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
TOP OF CHAIR
STAPLEONE FABRIC SAMPLE HERE
(MINIMUM 12” X 12”)
BOTTOM OF CHAIR
February 1, 2007 167
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W DDESCRIPTION
SeatingArlington
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9880 High Back Knee-Tilter • Curved urethane teardrop armrests.• Pneumatic seat height adjustment.• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black only.• Teardrop-shaped, urethane height-
adjustable arms available. Specify “TD”at time of order and add $50 (list)
COM Material Requirement:• 3 yds. @ 54” wide
EV9881 Medium Back Knee-Tilter
• Curved urethane teardrop armrests.• Pneumatic seat height adjustment.• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black only.• Teardrop-shaped, urethane height-
adjustable arms available. Specify “TD”at time of order and add $50 (list)
COM Material Requirement:• 21/2 yds. @ 54” wide
EV9882 Armchair • Curved urethane teardrop armrests.• Oval tube cantilever base. Available in
black only
COM Material Requirement:• 21/2 yds. @ 54” wide
EV9882 624 665 698 748 1179 351/2 261/2251/2
EV9880 907 960 1000 1063 1603 421/2 261/2 27
EV9881 879 920 954 1004 1436 37 261/2 26
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W DDESCRIPTION
SeatingTangier
EV9940-18-4
Medium Back Tilter • Impact resistant back shell.• Tension adjustment and single position
tilt lock• Pneumatic seat height adjustment.• 18” deep seat.• Height-adjustable arms with curved
urthane teardrop armrests• Oversized five-legged, injection molded
“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9940-18-4 629 665 695 738 1115 39 251/2261/2
EV9940-18-3
Medium Back Multi-Tilter
• Impact resistant back shell.• Ratchet style back height adjustment and
back angle and pneumatic seat heightadjustment.
• Forward and rearward seat tilt withinfinite tilt lock and freefloating backcontrol.
• Height-adjustable arms with curvedurthane teardrop armrests
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9940-18-3 715 751 780 823 1201 39 251/2261/2
EV9941-18-3
Low Back Multi-Tilter • Impact resistant back shell.• Ratchet style back height adjustment
and back angle and pneumatic seatheight adjustment.
• Forward and rearward seat tilt withinfinite tilt lock and freefloating backcontrol.
• Height-adjustable arms with curvedurthane teardrop armrests
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9941-18-3 675 713 741 784 1162 39 251/2261/2
EV9940-18-5
Medium Back Operator • Impact resistant back shell.• Ratchet style back height and pneumatic
seat height adjustment.• Seat and back angle adjust
independently and lock at any positionwith freefloating feature.
• Height-adjustable arms with curvedurthane teardrop armrests
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9940-18-5 673 709 739 782 1159 39 251/2261/2
February 1, 2007168
DESCRIPTION
SeatingTangier
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W D
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9941-18-5
Low Back Operator • Impact resistant back shell.• Ratchet style back height and pneumatic
seat height adjustment.• Seat and back angle adjust
independently and lock at any positionwith freefloating feature.
• Height-adjustable arms with curvedurthane teardrop armrests
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9941-18-5 635 671 700 743 1121 39 251/2261/2
EV9940-16-6
Medium Back Task • Impact resistant back shell.• Pneumatic seat height adjustment.• 16” deep seat.• Height-adjustable arms with curved
urthane teardrop armrests• Oversized five-legged, injection molded
“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9940-16-6 496 533 562 606 983 39 251/2261/2
February 1, 2007 169
PRODUCT COM COL DIMENSIONS/CODE Gr3 Gr4 Gr5 Gr6 Gr9 H W DDESCRIPTION
SeatingTangier
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9946-16-6
Armless Medium BackTask
• Impact resistant back shell.• Pneumatic seat height adjustment.• 16” deep seat.• Oversized five-legged, injection molded
“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9946-16-6 382 420 449 491 880 39 251/2261/2
EV9941-16-6
Low Back Task • Impact resistant back shell.• Seat depth and pneumatic seat height
adjustments.• Height-adjustable arms with curved
urthane teardrop armrests• Oversized five-legged, injection molded
“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9941-16-6 505 540 570 613 991 39 251/2261/2
EV9947-16-6
Armless Low Back Task EV9947-16-6 382 420 449 491 871 39 251/2261/2
EV9942-18
Armchair • Impact resistant back shell.• 18” deep seat• Curved urethane teardrop armrests.• 1” round tube cantilever base.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9942-18 445 481 510 554 931 39 251/2261/2
• Impact resistant back shell.• Seat depth and pneumatic seat height
adjustments.• Oversized five-legged, injection molded
“spider” base. Available in black only.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9943-18
Side Chair • Impact resistant back shell.• 18” deep seat.• Armless.• 1” round tube cantilever base.
COM Material Requirement:• 13/4 yds. @ 54” wide
EV9943-18 355 392 421 464 841 39 251/2261/2
February 1, 2007170
DESCRIPTION
SeatingPeligro
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W D
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9951-1 Medium Back SynchroTilter
• Decorative outer back shell and backupright cover.
• Height-adjustable arms with curvedurethane teardrop armrests.
• Built-in back height adjustment.• Synchro tilt with multi-position anti-
kickback tilt lock.• Pneumatic seat height adjustment• Oversized five-legged, injection molded
“spider” base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9951-1 795 827 851 888 1211 39 251/2 24
EV9951-4 Medium Back Tilter • Decorative outer back shell.• Height-adjustable arms with curved
urethane teardrop armrests.• Oversized five-legged, injection molded
“spider” base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9951-4 795 827 851 888 1211 39 251/2 24
EV9951-3 Medium Back Multi-Tilter
• Decorative outer back shell.• Ratchet style back height adjustment
and back angle and pneumatic seatheight adjustment.
• Forward and rearward seat tilt withinfinite tilt lock and freefloating backcontrol.
• Height-adjustable arms with curvedurethane teardrop armrests.
• Oversized five-legged, injection molded“spider” base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9951-3 731 764 787 826 1149 39 251/2 24
EV9955-3 Low Back Multi-Tilter • Decorative outer back shell.• Ratchet style back height adjustment and
back angle adjustment and pneumatic seatheight adjustment.
• Forward and rearward seat tilt with infinitetilt lock and freefloating back control.
• Height-adjustable arms with curvedurethane teardrop armrests.
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9955-3 701 732 757 795 1119 35 251/2 24
February 1, 2007 171
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W DDESCRIPTION
SeatingPeligro
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9951-5 Medium Back Operator • Decorative outer back shell.• Ratchet style back height adjustment and
pneumatic seat height adjustment.• Seat and back angle adjust independently
and lock at any position with freefloatingfeature.
• Height-adjustable arms with curvedurethane teardrop armrests.
• Oversized five-legged, injection molded“spider” base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9951-5 692 724 748 785 1109 39 251/2 24
EV9955-5 Low Back Operator • Decorative outer back shell.• Ratchet style back height adjustment and
pneumatic seat height adjustment.• Seat and back angle adjust independently
and lock at any position with freefloatingfeature.
• Height-adjustable arms with curvedurethane teardrop armrests.
• Oversized five-legged, injection molded“spider” base. Available in black only.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9955-5 635 667 691 728 1051 35 251/2 24
EV9955-6
EV9954-6
Low Back Task • Decorative outer back shell.• Pneumatic seat height and seat depth
adjustments.• Height-adjustable arms with curved
urethane teardrop armrests.• Oversized five-legged, injection molded
“spider” base. Available in black only.COM Material Requirement:• 11/2 yds. @ 54” wide
EV9955-6 633 664 689 725 1048 35 251/2 24
Armless Low Back Task • Decorative outer back shell.• Pneumatic seat height and seat depth
adjustments.• Armless.• Oversized five-legged, injection molded
“spider” base. Available in black only.COM Material Requirement:• 11/2 yds. @ 54” wide
EV9954-6 476 507 532 569 892 35 251/2 24
EV99553 Side Chair • Decorative outer back shell.• Armless.• Oval tube cantilever base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9953 387 420 444 481 804 38 20 24
EV9952 Armchair • Decorative outer back shell.• Molded arms with curved urethane
teardrop armrest.• Oval tube cantilever base.
COM Material Requirement:• 11/2 yds. @ 54” wide
EV9952 469 501 525 562 886 38 24 24
February 1, 2007172
DESCRIPTION
SeatingPeligro
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W D
DESCRIPTION
SeatingChatham
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W D
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV9960 High Back Multi-Tilter • High back multi-tilter with decorativeouter back shell.
• Ratchet style back height adjustment andback angle and pneumatic seat heightadjustment.
• Forward and rearward seat tilt withinfinite tilt lock and free floating backcontrol.
• Height adjustable arms with kidneyshaped urethane teardrop armrests.
• Over-sized five-legged, injection molded“spider” base.
EV9960 751 783 807 844 42 241/2241/2
EV9961 Medium Back Multi-Tilter
• Medium back multi-tilter with decorativeouter back shell.
• Ratchet style back height adjustment andback angle and pneumatic seat heightadjustment.
• Forward and rearward seat tilt withinfinite tilt lock and free floating backcontrol.
• Height adjustable arms with kidneyshaped urethane teardrop armrests.
• Over-sized five-legged, injection molded“spider” base.
EV9961 707 740 764 802 38 241/2 24
EV9962 Armchair • Round tube canitlever base.• Synthetic waterfall armrests.
EV9962 521 554 578 615 36 221/2 26
February 1, 2007 173
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
DESCRIPTION
SeatingZooey (Mesh)
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr3 Gr4 Gr5 Gr6 Gr9 H W D
EV8580T6 High Back SynchroKnee-Tilter
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height adjustable arms standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).
COM Material Requirement:• 1 yd. @ 54” wide
EV8580N1 High Back SynchroKnee-Tilter (armless)
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height adjustable arms standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).
COM Material Requirement:• 11/2 yd. @ 54” wide
EV8580UT6 High Back SynchroKnee-Tilter (upholstered)
• Upholstered seat with upholstered andblack mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded “spider”
base. Available in black as standard.• Urethane, height adjustable arms standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 11/2 yd. @ 54” wide
EV8580UT6 1304 1337 1371 1420 1562 1661 40 26 24
EV8580UN1 High Back SynchroKnee-Tilter (armless
upholstered)
• Upholstered seat with upholstered andblack mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).
COM Material Requirement:• 11/2 yd. @ 54” wide
EV8580UN1 1177 1210 1245 1293 1435 1534 40 19 24
EV8581T6 Low Back SynchroKnee-Tilter
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height adjustable arms standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).
COM Material Requirement:• 11/2 yd. @ 54” wide
EV8581T6 1222 1243 1267 1299 1393 1460 36 26 24
EV8580T6 1248 1270 1293 1326 1419 1486 40 26 24
EV8580N1 1121 1143 1166 1199 1292 1359 40 19 24
February 1, 2007174
DESCRIPTION
SeatingZooey (Mesh)
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV8581N1 Low Back SynchroKnee-Tilter (armless)
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black asstandard.
• Aluminum base available. Specify “AL” attime of order and add $99 (list).
COM Material Requirement:• 1 yd. @ 54” wide
EV8581UT6 Low Back SynchroKnee-Tilter (upholstered)
• Upholstered seat with upholstered &black mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height adjustable arms standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 13/4 yd. @ 54” wide
EV8581UT6 1278 1309 1346 1394 1535 1634 36 26 24
EV8581UN1 Low Back SynchroKnee-Tilter (armless
upholstered)
• Upholstered seat with upholstered &black mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 11/2 yd. @ 54” wide
EV8581UN1 1151 1182 1219 1267 1408 1507 36 19 24
EV8581N1 1095 1116 1140 1172 1266 1333 36 19 24
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr4 Gr5 Gr6 Gr7 Gr8 Gr9 H W D
February 1, 2007 175
DESCRIPTION
SeatingZooey (Mesh)
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr4 Gr5 Gr6 Gr7 Gr8 Gr9 H W D
EV8582UT6 High Back Tilter • Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black asstandard.
• Urethane, height-adjustable arms available• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 1 yd. @ 54” wide
EV8582UN1 High Back Tilter(armless)
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).
COM Material Requirement:• 1 yd. @ 54” wide
EV8582UN1 961 983 1006 1039 1132 1199 40 19 24
EV8582UUT6 High Back Tilter • Upholstered seat with upholstered andblack mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height-adjustable arms available• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 11/2 yd. @ 54” wide
EV8582UUT6 1154 1175 1212 1260 1400 1500 40 26 24
EV8582UT6 1088 1110 1133 1166 1259 1326 40 26 24
EV8582UUN1 High Back Tilter(armless)
EV8582UUN1 1027 1048 1085 1133 1273 1373 40 19 24• Upholstered seat with upholstered andblack mesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded “spider”
base. Available in black as standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 11/2 yd. @ 54” wide
February 1, 2007176
DESCRIPTION
SeatingZooey (Mesh)
Evolve Customer Suuport available at 856/552-4000, 888/827-2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856/552-4001.
EV8583UT6 Low Back Tilter(upholstered)
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height-adjustable arms available• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 1 yd. @ 54” wide
EV8583UT6 1020 1042 1065 1098 1192 1258 36 26 24
EV8583UN1 Low Back Tilter (armless upholstered)
• Upholstered seat with black mesh back• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 1 yd. @ 54” wide
EV8583UN1 894 916 939 972 1066 1132 36 19 24
EV8583UUT6 Low Back Tilter • Upholstered seat with upholstered & blackmesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black as standard.• Urethane, height-adjustable arms available• Aluminum base available. Specify “AL” at
time of order and add $99 (list).COM Material Requirement:• 1.5 yd. @ 54” wide
EV8583UUT6 1078 1111 1145 1194 1335 1434 36 26 24
EV8583UUN1 Low Back Tilter(armless upholstered)
• Upholstered seat with upholstered & blackmesh back
• Ratchet style back height adjustment• Pneumatic seat height adjustment• Multiple position tilt lock & infinite
tilt/tension control.• Oversized five-legged, injection molded
“spider” base. Available in black asstandard.
• Aluminum base available. Specify “AL” attime of order and add $99 (list).
COM Material Requirement:• 1.5 yd. @ 54” wide
EV8583UUN1 951 982 1018 1067 1207 1307 36 19 24
EV8585 Side Chair • Side chair with upholstered seat and meshback.
* Tungsten frame available with noupcharge
EV8585 713 728 751 780 866 926 361/2 23 24
DIMENSIONS/PRODUCT COM COL INCHESCODE Gr4 Gr5 Gr6 Gr7 Gr8 Gr9 H W D
February 1, 2007 177
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
INTRODUCTION
Contents 7
Coding and Order 10
Fabrics and Finish Listings 13
Sample Configurations 18
PANELS
Panel Components 41
Panel Tips - Features 42
Panel Summary 46
Panel COM Form 47
Panel Fabric Specification Sheet 48
Panel Fabric Sample 49
EVPFA Fabric Acoustic Panel 50
EVPFP Fabric Acoustic Panel - Premium 51
EVPFAM Fabric Acoustic Panel - Monolithic 52
EVPH1S Laminate Panel - One Side 52
EVPH2S Laminate Panel - Two Sides 52
EVPF1W Write Board Panel - One Side 53
EVPF2W Write Board Panel - Two Sides 53
EVPFGT Fabric Glazed Panel - Tempered Glass 54
EVPFPGT Fabric Glazed Panel - 54Premium Tempered Glass
EVPFGTU Fabric 12” Glazed Panel -Tempered Glass 55
EVPFPGTU Fabric 12” Glazed Panel - 55Premium Tempered Glass
EVPMGTU Monolithic 12” Glazed Panel - 56Tempered Glass
EVPFGTX Fabric 36” Glazed Panel - Tempered Glass 56
EVPXGT Fully Glazed Monolithic Panel - 57Tempered Glass
February 1, 2007178
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVPGPT Fully Glazed Premium Panel - 57Tempered Glass
EVPFOL Open Bottom Panel 58
EVPFPOL Open Bottom Panel - Premium 58
EVPFO Fabric Open Panel-12” Opening 59
EVPFPO Fabric Open Premium Panel -12” Opening 59
EVPFOX Fabric Open Panel - 24” Opening 60
EVPDS Door Panel - Solid 60
EVPDSL Door Handles 61
EVPFE Panel Extension Module 63
EVPFPE Panel Extension Module - Premium 63
EVPW1SE Write Board Extension Module - One Side 64
EVPW2SE Write Board Extension Module - Two Side 64
EVPH1SE Laminate Extension Module - One Side 65
EVPH2SE Laminate Extension Module - Two Sides 65
EVPOE Open Panel Extension Module 66
EVPGTE Tempered Glass Panel Extension Module 67
EVPGPTE Tempered Glass Premium Panel 67Extension Module
EVPVC Variable-Height Connector 68
February 1, 2007 179
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVPER End-of-Run Kit (Wall Mount) 68
EVPIP2 Inline Two-Way Post 68
EVPCP1 One-Way Post 69
EVPCP2 Two-Way Corner Post 69
EVPCP3 Three-Way Corner Post 69
EVPCP4 Four-Way Corner Post 69
Panel Tops - Connectors 70
EVPIC Inline Panel Connector 71
EVPVP2 Two-Way Variable-Height Corner Post 71
EVPVP3 Three-Way Variable-Height Corner Post 71
EVPVP4 Four-Way Variable-Height Corner Post 71
EVPIEC Inline Panel Extension Connector 71Non-Slotted
EVPIECS Inline Panel Extension Connector Slotted 72
EVPCEP1 One-Way Post Extension-Non-Slotted 72
EVPCEPS1 One-Way Post Extension-Slotted 72
EVPCEIP2 Inline Post Extension-Non-Slotted 72
EVPCEIPS2 Inline Post Extension-Slotted 72
EVPCEP2 Two-Way Post Extension-Non-Slotted 72
EVPCEPS2 Two-Way Post Extension-Slotted 73
February 1, 2007180
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVPCEP3 Three-Way Post Extension-Non-Slotted 73
EVPCEPS3 Three-Way Post Extension-Slotted 73
EVPCEP4 Four-Way Post Extension-Non-Slotted 73
EVPCEPS4 Four-Way Post Extension-Slotted 74
EVPVTF Vertical Flat Trim-PVC 74
EVPVTL Vertical “L” Trim-PVC 74
EVPTE Panel Extension Trim-PVC 74
EVPHPT End-of-Run-High Profile-PVC 75
EVPUET12 Upmount Extension Trim-PVC 75
EVPUET66 Upmount End-of-Run Trim-PVC 75
EVPUER Upmount End-of-Run Kit 75
EVPEER End-of-Run Extension-Non-Slotted 76
EVPEERS End-of-Run Extension-Slotted 76
EVPVTU Vertical “U” Trim-PVC 77
EVPTV Panel Trim Variable-Height-PVC 77
EVPERHP High Profile End-of-Run Kit 78(Wall Mount) - PVC
EVDHPT High Profile End-of-Run Post Kit 78(Wall Mount)-PVC
EVDICHP1 Inline High Profile Top Cap 2” High 78
February 1, 2007 181
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVDCPHP1 One-Way High Profile Cap 2” High 78
EVDPCPHP2 Two-Way High Profile Top Cap 2” High 79
EVDCPHP3 Three-Way High Profile Top Cap 2” High 79
EVDCPHP4 Four-Way High Profile Top Cap 2” High 79
EVPERA End-of-Run Post Kit - Aluminum 80
EVPUERA Upmount End-of-Run Post Kit - Aluminum 80
EVPCPA1 One-Way Post - Aluminum Trim 80
EVPIPA Inline Two-Way Post - Aluminum Trim 80
EVPCPA2 Two-Way Post - Aluminum Trim 81
EVPCPA3 Three-Way Post - Aluminum Trim 81
EVPVPA2 Two-Way Variable Height Corner Post 81Aluminum Trim
EVPVPA3 Three-Way Variable Height Corner Post 81Aluminum Trim
EVPVPA4 Four-Way Variable Height Corner Post 82Aluminum Trim
EVPEERA End-of-Run Extensioin - Non-Slotted 82Aluminum Trim
EVPEERSA End-of-Run Extensioin - Slotted 82Aluminum Trim
EVPCEPA1 One-Way Post Extension - Non-Slotted 82Aluminum Trim
EVPCESPA1 One-Way Post Extension - Slotted 83Aluminum Trim
February 1, 2007182
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVPCEIPA2 Inline Post Extension - Non-Slotted 83Aluminum Trim
EVPCEISPA2 Inline Post Extension - Slotted 83Aluminum Trim
EVPCEPA2 Two-Way Post Extension - Non-Slotted 83Aluminum Trim
EVPCESPA2 Two-Way Post Extension - Slotted 84Aluminum Trim
EVPCEPA3 Three-Way Post Extension - Non-Slotted 84Aluminum Trim
EVPCESPA3 Three-Way Post Extension - Slotted 84Aluminum Trim
EVPVTFA Flat Trim-Aluminum 85
EVPVTFEA Flat Extension Trim - Aluminum 85
EVPTVA Flat Trim-Variable Height-Aluminum 85
EVPERTA End-of-Run Trim-Aluminum 85
EVPTEA Panel Extension Trim-Aluminum 86
EVPUETA12 Upmount Extension Trim-Aluminum 86
EVPUETA66 Upmount End-of-Run Trim-Aluminum 86
EVPTTA Panel Top Trim-Aluminum-Factory Installed 87
EVPTTA-F Panel Top Trim-Aluminum-Field Installed 87
EVPTNTA Panel Top Notched Trim-Aluminum - 87Factory Installed
EVPTNTA-F Panel Top Notched Trim-Aluminum- 87Field Installed
February 1, 2007 183
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVPTDNTA Panel Top Double Notched Trim- 88Aluminum - Factory Installed
EVPTDNTA-F Panel Top Double Notched Trim- 88Aluminum - Field Installed
Section D - Electrical
Technical Information 89
EVE8PD Power Distribution Housing 94
EVE8CP Jumper Cable 94
EVE8CP Pass-Through Cable 94
EVE8CI-1 “I” Connector 95
EVE8RD Duplex Receptacles\ 95
EVE8FR1 Reversible Floor Power Entry 95
EVE8FR2 Reversible Floor Power Entry 95
EVE8EC Ceiling Power Entry 96
EVEENY-2 Hardware Power Entry Box - New York 96
EVEJBC-1 Hardware Junction Box - Chicago 96
EVDPE Post Extension Data/Comm Lay-In 96
EVEA54 Desktop Data/Power Receptacle 97
EVEA44 ADAPT Power/Data Module 97
EVETL Under Storage Task Light 98
EVETLV Variable Intensity Task Light 98
February 1, 2007184
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVETL Chicago Task Light 98
EVECC Cord Cover 98
EVEMAE Mini-Adapt Power Module 99
EVEMAD Mini-Adapt Data Module 99
EVH8RC Raceway Covers 100
EVH8RA Raceway Opening Adapter 100
EVE8CT Transition Jumper Cable 100
WORKSURFACES
Technical Information 101
EVWS Straight Worksurface 104
EVWVL Curvilinear Worksurface-Left 104
EVWVR Curvilinear Worksurface-Right 105
EVWNL Notched Worksurface-Left 105
EVWNR Notched Worksurface-Right 106
EVWCC Corner Curved Worksurface 106
EVWCCK Corner Worksurface with Curved 107Keyboard Support
EVWCK Corner Keyboard Worksurface 107
EVWCF Five-Sided Worksurface 107
EVWCEL Extended Curved Corner-Left 108
February 1, 2007 185
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVWCER Extended Curved Corner-Right 108
EVWL “L” Worksurface 109
EVWH Hatchet Worksurface 109
EVWD “D” Worksurface 109
EVWW Wedge Worksurface 110
EVWPT “P” Top Worksurface 111
EVWCD 120 Degree Curved “D” Worksurface 112
EVWP Piano Top Worksurface 113
EVWQR Quarter Round Panel Worksurface 114
EVWQRC Quarter Round Panel Corner Worksurface 114
EVWMP Worksurface Modesty Panel 115
EVWR Radius Worksurface 115
EVWT Straight Transaction Surface 115
EVWTV Straight Transaction Surface with Cut-out 116
EVWTCL “L” Corner Transaction Surface 116
EVWTCT “T” Corner Transaction Surface 116
EVWTE End Transaction Surface 116
EVWTEV End Transaction 117
February 1, 2007186
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVWTD End “D” Transaction Surface 117
EVWTDV End “D” Transaction Surface with Cut-out 117
EVWTDD Double “D” Transaction Surface E.15
EVTTP Teardrop Pivoting Table 118
EVTTE Teardrop Extension Table 118
EVHEP End Panel 119
EVHS Support Leg 119
EVHC Cantilever 119
EVHML Monoleg 119
EVHCB Corner Bracket 119
EVHTB Transaction Bracket 119
EVHFB Flat Bracket 120
EVHZB “Z” Bracket 120
EVHPB Pedestal Bracket 120
EVHV Wall Adapter 120
FS DESKING
Technical Information 121
EVDFSC Five Sided Corner Chassis 122
EVDRL Return - Left 123
EVDRR Return - Right 123
EVDB Bridge Chassis - Modesty 124
EVDSRL Supported Return - Left 125
EVDSRR Supported Return - Right 125
EVDSB Supported Bridge Chassis 126
EVDUD Rectangular Desk Chassis 127
EVDECCL Extended Corner Chassis - Left 128
EVDECCR Extended Corner Chassis - Right 128
EVDCL Conference Top Chassis - Left 129
EVDCR Conference Top Chassis - Right 129
EVDSHF Hutch - Single Door 130
EVDSHF Hutch - Double Door 130
EVDSCCR Modesty Inter-Connect Bracket 131
EVDHPMPR Panel Mount Bracket 131
EVHCBR Corner Bracket 131
EVDHLB End Panel “L” Bracket 131
EVDHMSB Mid Support Bracket 132
EVDHZ “Z” Bracket 132
February 1, 2007 187
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
February 1, 2007188
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVHFB1 Flat Bracket 132
EVDSHP1 Screw Pack 132
EVDMPCL Corner Modesty Panel - Left 133
EVDMPCR Corner Modesty Panel - Right 133
EVDEP End Panel 134
EVDCP Central Support Panel 134
EVDTB Free Standing Tackboards 134
STORAGE
Technical Information 135
File Drawer Opening Capacity 136
Lateral File Features 138
Paint Colors 139
EVSOF12 Overhead Flipper Door Storage Unit 140
EVSOF13 Full Pull Overhead Flipper Door 140Storage Unit
EVSOF17 International Overhead Flipper Door 140Storage Unit
EVSLK Lock for Overhead Flipper Door 140Storage Unit
EVSOF16 Overhead Flipper Door Unit- 141Fully Assembled
EVSOIB International Overhead Back Wall 141
EVSOB Overhead Back Wall 141
EVSOFPB Full Pull Overhead Back Wall 141
EVSBF Freestanding Box, File Pedestal 142
February 1, 2007 189
CODE DESCRIPTION PAGECODE DESCRIPTION PAGE
Index
EVSBBF Freestanding Box, Box, File Pedestal 142
EVSFF Freestanding File, File Pedestal 142
EVSBFM Mobile Box, File Pedestal 143
EVSBBF-M Mobile Box, Box, File Pedestal 143
EVSFF-M Mobile File, File Pedestal 143
EVSBFC Mobile Box, File Pedestal with Cushion 143
EVST4H2F2S 2 File Four High Storage Tower 144
EVST4H2B2S 2 Box, 1 File Four High Storage Tower 144
EVST5H2F2S 2 File Five High Storage Tower 144
EVST5H2B1S 2 Box, 1 File Five High Storage Tower 145
EVST5H3F2S 3 File Five High Storage Tower 145
EVST5H2B2S 2 Box, 2 File Five High Storage Tower 145
EVSPD Pencil Drawer 146
EVSSL Low Profile Shelf 146
EVSOH High Profile Shelf 146
EVSSC Corner Shelf Kit F.5
EV91-FIH Lateral Files 147
EV952-A Storage Cabinet Sub Base 148
February 1, 2007190
Index
EV91-SI/SIE/SIEND Storage Cabinets 148
EV91-4MSL Four High Cabinet 149
EV91-5MSL Five High Cabinet 149
EV91-5WI Wardrobe Cabinets 149
EVSHFB Hanging File Bars 150
EVSFBB Front-to-Back Bars 150
EVSLAB Legal-to-Letter Adapter 150
EVS-PD Divider Plates 150
EVAPDIV Pedestal Divider Plates 151
EVT Lateral File Tops 151
ERRC/EFSC Receding Door Conversion 152
EFSC Fixed Front Drawer Conversion 152
91E-HHD Half Height Drawers 152
91EPS Posting Shelf 152
EVSEDPS EDP Adapter 153
EVSCWB Counterweight Balance 154
EVS Keys 155
Key Alike Form 154
February 1, 2007 191
Index
ACCESSORIES
EVATB Tack Board 155
EVWAWB White Marker Board 155
EVAMT Marker Tray 155
EVDTB18-H Half Width - Tack Board - Hutch 156
EVALB2-H Half Width - Ganging Load Bar - Hutch 156
EVALB2-4 Ganging Load Bar - Hutch 156
EVSHD01 Overhead Divider - Hutch 156
EVALB Load Bar 157
EVALB2 Ganging Load Bar-Top 157
EVALB2-2 Ganging Load Bar-Middle 157
EVALB2-3 Ganging Load Bar-Bottom 157
EVSOFD Overhead Divider 157
EVA011 Binder Bin 158
EVA012 Letter Tray 158
EVA013 Slanted Sorter 158
EVA014 Media Bin 158
EVA015 Utility Tray 158
February 1, 2007192
Index
EVA016 Flip Sorter 158
EVANP Name Plate 159
EVACH Coat Hook 159
EVWAPS Printer Slot 159
EVSPD Pencil Drawer 159
EVAES Easel 160
EVATP Touch-up Paint Kit 160
EVCPU CPU Holder 161
EVWACP CRT Corner Plate 161
EVWAK1 Adjustable Keyboard Clamp & Palm Rest 161
EVWAK3A Adjustable Keyboard Mouse Tray 161
SEATING
Technical Information 163
Seating Tips 164
Seating Fabric Specification Sheet 165
Seating Fabric Sample 166
Arlington 167
Tangier 167
Peligro 170
Chatham 172
Zooey 173
EVOLVE FURNITURE GROUP 17 West Stow Rd, P.O. Box 562 Marlton, New Jersey 08053 T 856.552.4000 888.827.2500 F 856.552.4001 WWW.EVOLVEFURNITUREGROUP.COM
Evolve Furniture Group Showrooms:
Atlanta, Georgia
Charlotte, North Carolina
Chicago, Illinois
Cleveland, Ohio
Dallas, Texas
Detroit, Michigan
Elkridge, Maryland
Ft. Lauderdale, Florida
Glendale Heights, Illinois
Houston, Texas
Los Angeles, California
Minneapolis, Minnesota
New Orleans, Louisiana
New York City, New York
Philadelphia, Pennsylvania
Phoenix, Arizona
Seattle, Washington
Tampa, Florida
Washington, DC
Additional showrooms opening throughout 2007.
The Evolve System is Greenguard certifiedto rigorous indoor air quality standards forlow-emitting interior products.
Paper stock used in printing this brochurecontains post consumer recycled content.
FURNITURE FOR A SUSTAINABLE WORLDevolve furniture group
PRICE LISTEffective February 1, 2007A $25 net handling charge per shipmentwill be applied for non-UPS-able orders ofless than $2000 list.
PRICE LISTEVO
LVE FURN
ITURE G
ROU
PEffective February 1,2007