Prestressed Concrete Lintels - FP McCann Brochures Lo-Res... · fpmccann.co.uk/lintels Prestressed...
-
Upload
hoangtuyen -
Category
Documents
-
view
229 -
download
0
Transcript of Prestressed Concrete Lintels - FP McCann Brochures Lo-Res... · fpmccann.co.uk/lintels Prestressed...
fpmccann.co.uk/lintels
Prestressed Concrete Lintels
Our range of prestressed concrete lintels and padstones are designed to provide a low cost and resilient masonry support for door and window openings. The prestressed casting system used to develop lintels ensures consistent high quality and a smooth finish, providing safer manual handling. Our lintels are manufactured to British and Irish Standards.
To place an order, please contact Nuala McCann on:028 6772 4008 or email: [email protected]
Prestressed Concrete Lintels
Manufacture size to order
Profile EDGE 65X100
FLAT 65X100
EDGE 140X100
FLAT 100X140
EDGE 215X100
FLAT 100X215
Effective Span
600 500 32.04 25.49 128.84 81.49 150.59 103.30
750 650 29.27 23.88 105.62 73.98 140.60 95.83
900 800 26.52 18.00 84.68 51.72 130.61 88.33
1050 950 23.77 13.01 56.64 45.85 108.80 65.43
1200 1100 21.01 10.28 49.74 34.34 99.50 59.39
1350 1250 18.26 9.41 43.14 24.45 72.46 47.39
1500 1400 15.50 8.54 35.94 20.30 65.20 36.74
1650 1550 12.74 7.67 29.04 16.28 58.08 32.02
1800 1700 9.99 6.80 22.14 11.95 50.88 27.29
1950 1850 7.23 5.94 15.30 7.80 43.68 22.57
2100 1950 5.95 4.79 12.60 7.28 36.50 17.84
2250 2100 4.48 3.65 12.15 5.74 29.30 13.12
2400 2250 3.40 2.50 11.70 5.66 22.12 12.00
2550 2400 11.25 5.57 21.04 11.25
2700 2550 10.80 5.50 19.92 9.46
2850 2700 10.37 5.40 18.88 8.78
3000 2800 9.90 5.33 17.82 8.11
3150 2950 16.75 7.44
3300 3100 15.62 6.78
3450 3250 14.60 6.10
3600 3400 13.52 5.43
Lintel Load/Span Table
* Sample CE certification for 1650 PS lintel
FP McCann Ltd.
BS EN 845-2: 2013
*Lintel Type: 100mm x 65mm x 1650mm, intended to be used in masonry walls and partitions*Loading capacity on flat: 7.67kNLoading capacity on edge: 12.7kNDeflection on flat: 4.77mm @ 7.67kNDeflection on edge: 4.77mm @ 12.7kNWater absorption: <6%Water vapour permeability: 50/150Mass per unit area: 149kg/m2Thermal resistance: Thermal conductivity λ10, dry 1.72 W / (m.K). Resistance to fire: Class A1 Durability (against corrosion): 40N ConcreteDurability against freeze thaw: Not to be left exposed.Dangerous Substances: N.P.D.
To place an order, please contact Nuala McCann on:028 6772 4008 or email: [email protected]
Please note: all measurements are in mm.