Pressing Advancement

36
Shenzhen Chuangyi Garment Ironing Equipment Co., Ltd. is a professional company engaging in production of industrial ironing equipment and related accessories. After several years of efforts, CYC Chuangfeng Series Fusing Machine produced in our company has gained deep trust of large numbers of garment manufacturers and distributors. The maintenance service center of our company can maintain fusing machine, needle detector and other ironing equipment from various countries. We have built up good service image among the customers. Our company has firm economic basis and strong professional technical strength. Nowadays, the garment industry requirement is constantly changing, our company bravely develops and innovates. Sticking to the tenet of joint advancement and common benefit creation, we continuously develop new products to suit for various requirements of customers. Coexistence of Quality and Development and Coexistence of Credit and Cooperation. We will set up a friendship bridge based on our sincerity and jointly create beautiful future for both of us!

description

Fabric pressing

Transcript of Pressing Advancement

Page 1: Pressing Advancement

Shenzhen Chuangyi Garment Ironing Equipment Co., Ltd. is a professional company engaging in production of industrial ironing equipment and related accessories. After several years of efforts, CYC Chuangfeng Series Fusing Machine produced in our company has gained deep trust of large numbers of garment manufacturers and distributors. The maintenance service center of our company can maintain fusing machine, needle detector and other ironing equipment from various countries. We have built up good service image among the customers. Our company has firm economic basis and strong professional technical strength. Nowadays, the garment industry requirement is constantly changing, our company bravely develops and innovates. Sticking to the tenet of joint advancement and common benefit creation, we continuously develop new products to suit for various requirements of customers. Coexistence of Quality and Development and Coexistence of Credit and Cooperation. We will set up a friendship bridge based on our sincerity and jointly create beautiful future for both of us!

Page 2: Pressing Advancement

Categories: Bonder

Product number:

CR-400

Product name: Small fusing press CR-400/300/200

clicks: 29 times

Description: This machine aesthetic, and rational sturcture, appleed to small pieces of adhesion.

Unique anti-deflecting device guarantee for the normal operation of the.

Low-power, operation simple and convent.

the appearance of color and electrical configurations are difference between CY and CR machine.

MODEL CR-400 CR-200

POWER SUPPLY 1P-220V 1P-220V

RATED HEATER3.2Kw 1.2Kw

Page 3: Pressing Advancement

OUTPUTMOTOR25W 25W

FUSING WIDTH 380mm 180mm

MAX FUSING SPEED

0-8m/min(max) 0-8m/min(max)

PRESSURE 1.5kg/cm(max) 1.5kg/cm(max)

TEMPERATURE 200℃(max) 200℃(max)

DIMENSION 1630(L)×820(W)×38(H)mm1610(L)×600(W)×255(H)mm

WEIGHT 100kg 65kg

Categories: Bonder

Product number:

CY-900L

Product name: Continuous straight linear pusing press CY-900L/600L

clicks: 4 times

Page 4: Pressing Advancement

Description:

Continuous operations, and improve production efficiency.

Using automatic devices that will ensure normal transport belt line.

Using seamless Teflon transport belt, and extended belt life, while increasing joint effect.

A special heating designed to control temperature difference between the two sides and middle are in normal rang.

Set up front / rear, upper / lower dual-use heating select switch, according to different piece to select; at the same time using the advanced electronic thermostat and solid state relay(SSR), to achieve accurate temperature control.

Using compressing air to ensure the pressure more evenly and accurately, adjust more simple.

Installed a cooling devices in material outlet to ensure that the pieces in a short period of time cooling shape.

MODEL CY-900L CY-600L

POWER SUPPLY3P-380V 3P-380V

RATED OUTPUT

HEATER

12Kw 9.6Kw

MOTER230W 230W

FUSING WIDTH 900mm 600mm

MAX FUSING SPEED

5 sec(max) 5 sec(max)

PRESSURE 0-4.5kg/cm2 0-4.5kg/cm2

TEMPERATURE 0-200℃ 0-200℃DIMENSION

2940(L)×1500(W)×1200(H)mm

2740(L)×1200(W)×1200(mm

WEIGHT 474kg 390kg

Page 6: Pressing Advancement

Description: Air-driven is adopted, and oil pressure effect can be achieved through pressurization.

The heating lines are distributed rationally with three controlling regions. Heat is transferred through high quality aluminium sheet and temperature on each part of the operating panel is even, and an ideal adhering effect can be reached.

This machine is suitable for adhering high quality Tube-Shaped part and collar of T-Shirt.

MODEL CY-I

POWER SUPPLY

3P-380V

RATE OUTPUT

5.4KW

TABLE SIZE

1000×250mm

PRESSURE4-6kg/cm2

WEIGHT 0-200℃MCAHINE SIZE

1300(L)×1120(W)×1560(H)mm

WEIGHT 705kg

Page 7: Pressing Advancement

Categories: Bonder

Product number:

CY-450SB

Product name: Small automatic fusing press CY-450SB

clicks: 9 times

Description: This machine is equipped with automatic adjust belt device;double way belt stop device will automatically stop to deviate from the belt.

Using seamless Teflon transport belt, and durable.

Rectification micro-switch designed long-handled "R" in the effective protection the belt.

All four upper and lower heating plates are evenly distributed, with a belt close touch, enhance adhesion effect.

The use of advanced electronic thermostat and solid state relay (SSR). TO achieve accurate temperature control.

CY-450SB were improved base on characteristics of trademark manufacture, Air-cooled system of enter bracket and income material can

Page 8: Pressing Advancement

be choose to use.

MODEL CY-450S/450SB

POWER SUPPLY 1P-220V

RATED OUTPUT

HEATER4.0Kw

MOTER

FUSING WIDTH 450mm

MAX FUSING SPEED 8.5m/min

PRESSURE 1.5kg/cm(max)

TEMPERATURE 200℃(cax)

DIMENSION 1660(L)×880(W)×490(H)mm

WEIGHT 180kg

:: Garment Pressing Machinery ::

Simons Boiler Co. sell a wide range of inexpensive top quality dry cleaning equipment and clothes pressing machinery, including innovative vacuum ironing tables and clothes steamers. Our garment pressing products include clothes steamers, ironing boards, irons and formers.

Our vacuum ironing tables, ironing boards, steam boilers and clothes presses can be used for commercial dry cleaning and clothes pressing. If you are after a professional clothes iron, browse through our range of steam irons. Our clothes steamers offer an effective solution to removing creases from clothing, tablecloths, upholstery and drapes. Formers also use steam for a perfect, non-crease iron.

Page 9: Pressing Advancement

:: Steam Irons ::

It has long been known that pressing without the aid of steam makes the task a much more difficult & lengthy process. New materials being released make this job even tougher without steam as Polyesters, Rayons, Natural Fibres etc. will not press well without the aid of steam.

Simons carry the largest range of steam ironing equipment in Australia and can offer a solution to business ranging in size from small home pressing services up to the requirements of large clothing manufacturers and Dry Cleaners. Please browse our range of units.

Simons Domina 1000

High output steam generator with stainless steel boiler and professional iron . High standard quality components and minimum maintenance.

Ideal for use in Laundries, Retail Stores, Fashion Houses & for the home.

Approved by Workcover & Electricity Authorities.

Technical Data:

Electrical power supply: 230V 50HZ

Boiler capacity: 2 liters

Water level: 1,4 liters

Average usage duration : 2hrs

Iron resistance: 450W

Boiler resistance: 700W

Net weight: 7,5Kg

High-yeld steam generators with iron for household

Page 10: Pressing Advancement

or light professional use.

Stainless steel boiler with high capacity for up to

2 hours of non-stop usage

Long lasting, self-cleaning heating element

Two safety thermostats in the boiler

Safety cap

Professional iron with double thermostat protection

Low maintenance

Low power consumption: only 1150W

Uses tap water

Iron rest and cable stand included.

Simons All Steam Non Electric Irons ::

Page 11: Pressing Advancement

BS-3PC Features include stainless steel base, special rubber handle, waste water valve, steam volume adjustment, teflon braided steam hose cover, Magic teflon shoe optional

Technical data:

Weight: 1.35kg

Base size: 191mm x 108mm

Simons Gravity Feed Bottle Steam Irons ::

ES-94A Features include:

comfortable superb quality handle,

long lasting button,

sharp body design,

Magic teflon shoe (optional),

demineralizer (optional).

Technical data:

Wattage: 1000W

Weight: 2.1kg

Base size: 205mm x 124mm

Page 12: Pressing Advancement

:: Vacuum Ironing Table ::

Since the early 1980's, the addition of a vacuum suction fan to heated ironing tables has seen a drastic improvement in the quality of finish of garments being pressed. These tables also allowed for much greater speed of pressing and therefore a greater output of garments could be achieved.

Simons stock a large range of "Trevil" Vacuum Ironing tables from Italy. These tables are also fitted with heating elements to keep the tables dry and to allow pre-heating to the underside of a garment being pressed.

:: Simons Domostir Plia ::

Semi-professional folding, height adjustable and heated suction table. Equipped with movable suction command foot pedal

Technical Data:

Electrical power supply: 230V. 50Hz.

Suction motor: 0,06 kW

Table resistance: 0,4 kW

Board dimensions: 110x38x25 cm

Overall dimensions: 135x38x85-90 cm

Net weight: 17 Kg

Gross weight: 19 Kg

Page 13: Pressing Advancement

Packing dimensions: 119x36x48 cm

THE ADVANTAGES OF SIMONS AUTOMATIC ELECTRIC STEAM IRONING UNITS

AND ELECTRICALLY HEATED IRONING TABLES

• The Simons Automatic Electric Steam Ironing Unit manufactured by W Simons & Sons (Aust) Pry Ltd

consists basically of an electric fully automatic steam boiler, thumb switch controlled electric steam iron

and, if required, an electrically heated ironing table.

• The steam is produced in a miniature fully automatic packaged electric steam boiler measuring 250mm x

350mm x 640mm high and is situated adjacent the ironing table as illustrated on our brochure.

• Simons miniature steam boilers of the size indicated above are available in capacities to produce an

adequate quantity of steam for l, 2, 3, 4, 5 or 6 irons. The boiler produces steam at between 550 - 690

kPa, is fully automatic in that it has a built-in feedwater pump which automatically during the day pumps

water into the boiler as and when required, and is fitted with a fully automatic pressure switch which

maintains the pressure at the desired working pressure without any operator's supervision. The automatic

electric steam boiler is enclosed in an attractive marvi-plate sheet metal enclosure which consists of vinyl

covered sheet metal to ensure maintenance free care and attractive appearance. The boiler is fitted with

a pressure gauge, safety valve and pilot lights. In addition a blowdown valve is fitted to the side of the

boiler beneath the automatic feedwater pump for thorough draining and cleaning of the boiler.

• The boiler requires only switching on in the morning and switching off at the end of the day's work. There

is no supervision, no attention, no operator required to ensure the satisfactory operation of the boiler.

Page 14: Pressing Advancement

Once switched on it will automatically maintain the desired pressure and water level to produce the steam

required for the number of irons for which the boiler is selected. The steam from the boiler is transferred

to an electric solenoid valve as illustrated on the brochure. The electric solenoid valve which controls the

flow of steam to the iron is controlled from a thumb switch fitted to the handle of the iron. The thumb

switch and solenoid valve controlling the flow of steam to the iron is reduced in voltage to 24V so that

there is no danger from the micro switch fitted to the thumb switch on the handle of the iron should

damage occur to same. Steam is supplied to the iron via a P.T.F.E. tefane steam hose which is supported

from a spring stanchion to provide a neat assembly of hoses and flexes as illustrated on the brochure.

• The steam iron is available in four weights - 1½, 2½, 3 and 4½ kg. The l½kg iron is fitted with a polished

aluminium base whilst the 2½, 3 and 4½kg irons are fitted with a gun-metal base, bright nickel plated. All

model steam irons are fitted with a fully automatic thermostat to control accurately the temperature of the

base of the iron, adjustable between 90 C and 230 C so as to provide a full range of temperatures for the

ironing of all types of garments. The thermostat adjustment knob is located beneath the iron handle as

illustrated on the brochure. The construction of the iron is such that maintenance may be carried out with

the least possible inconvenience. The iron is constructed with the base from which two studs rise

vertically and each component, which includes an element, superheater and thermostat are placed in turn

on the base before the fitting of the iron bonnet. Therefore, for maintenance, by the removal of the iron

bonnet each component may be individually replaced without the destruction of any other one

Page 15: Pressing Advancement

component, thus maintenance costs are kept to an absolute minimum.

• The steam produced in the boiler when transferred from the boiler through the solenoid valve and teflon

steam hose to the steam iron leaves the steam iron with such velocity that it has the capacity to blow a

distance of 15 metres from the iron. The actual amount of steam used for steam pressing is a quantity of

steam equal to a blow of approximately l½ metres and this flow is controlled from a needle valve fitted to

the solenoid valve, as can be seen on the illustration. A table is included at the end of this precis detailing

approximate "Pressing Time" for various types of garments when using a Simons automatic steam iron

and which has been compiled from information supplied by Australian Clothing Manufacturers using

Simons steam irons.

• The steam iron unit can be supplied as a one-iron unit, two-iron unit, three, four, five or six-iron unit. A

typical example of the lay-out of a two-iron unit is as illustrated on our brochure. The first iron is served

from the solenoid valve located immediately on top of the boiler, the second iron is served from the

solenoid valve fixed to the table where the second iron is to be located, and steam is supplied to the

second iron via pipework which is connected into a socket provided on the right hand side of the boiler.

The unit can be further extended to a three-iron unit as illustrated on our typical "3-iron unit lay-out"

drawing. The configuration and lay-outs as illustrated and as detailed on our drawing are typical only, but

with these types of lay-outs they ensure a very economical installation utilising the principle of gravity

condensate drainage, thus avoiding expensive pipework and steam traps, etc. A close study of the

drawings and illustrated brochure will indicate to the user the simplicity of installation, pipework lay-out

and freedom of maintenance.

Page 16: Pressing Advancement

-ELECTRICALLY HEATED IRONING TABLES-

• The substantial quantity of steam available from the Simons automatic electric steam ironing unit which is

essential for industrial steam ironing to ensure immediate relaxation of the tensions of the fibres of the

garment being ironed, provides a problem of condensation of steam into the cotton padding ironing

surface covering the ironing table. To overcome this problem Simons manufacture an electrically heated

ironing table, the ironing table is of cast aluminium with an electric element and thermostat fitted to the

underside. The electric element heats the aluminium table to a temperature of 90 C under the control of

the thermostat. The principle of operation is that the heated surface of the ironing table withdraws the

moisture which would normally collect in the cotton padding to re-evaporate same to ensure a continuous

and perfectly dry ironing. surface. It is essential that the ironing surface on the table is bone dry, as the

garment prior to ironing is dry and the garment on completion of ironing must again be dry to ensure

retention of tension, shape and finish created by the ironing operation.

• The ironing tables are available in several shapes and sizes, the most common being for the frock trade

300mm wide x 1.2m long and tapered to one end; for the frock and slack trade 360mm wide x 1.4m long

tapered to one end; for the tailors a table 180mm wide increasing in size to 430mm and for trouser leg

seam busting a seam buster table 100mm wide x 1.2m long. All tables are of cast aluminium, are fitted

with an electric element, are thermostatically controlled to maintain a surface temperature of 90 C and are

mounted on an attractively finished steel column and aluminium base for securing to the floor, generally

Page 17: Pressing Advancement

as illustrated on our brochure.

-SIMONS SUCTION ELECTRICALLY HEATED IRONING TABLES-• The Suction (Vacuum) Electrically Heated Ironing Tables as illustrated on the reverse side of the SteamIroning Unit brochure incorporates all the features of the standard electrically heated ironing table referredto above plus a powerful suction fan to provide quicker ironing with extra dry cool garments, surpassingeven the existing standard range of Simons electrically heated ironing tables.

The Simons Suction (Vacuum) Heated Ironing Tables feature:

- Powerful suction (vacuum) guarantees extra dry cool garments

- Table tapered to ensure proper ironing of shaped garments

- Electrically heated corrosion-free pressing surface with automatic variable temperature control

- Supplied with fitted heat resistant ironing covers

- Lifelong construction with suction tub of rust-free cast aluminium and suction plate of perforated

aluminium

- Suction controlled by a single foot pedal

- Fitted with continuous suction manual over-ride switch with indicator lamp for ease of operation

- Quiet operation and fitted with directional discharge outlet

Options: Sleeve arm with powerful suction and swivel action. Suction is automatic, no levers or arms

to pull.

Simons 'Presrite' electric steam iron low-boy unit. readily fitted.

Simons Alisea ::

Page 18: Pressing Advancement

Height adjustable heated suction ironing tables with interchangeable forms. Ergonomic design unbeatable for its price and quality

Technical Data:

Electrical power supply: 230V. 50Hz.

Suction Motor: 0,45 kW 1ph

Table resistance: 0,4 kW

Table dimensions: FU 112x38x23 cm

Overall machine dimensions: FU 130x38x75-95 cm

Net weight: FU 60 Kg.

Gross weight (carton): FU 69 Kg

Packing dimensions: FU 135x46x78

:: Simons Planora ::

Height adjustable rectangular heated suction table. Available in three different ironing surfaces and fitted for manual exclusion of suction when arm forms are utilized.

Technical Data:

Electrical power supply: 230V. 50Hz.

Suction Motor:0,55 kW 1ph / 0,55 kW 3ph

Page 19: Pressing Advancement

Suction discharge outlet: Ø 160

Table resistance: 0,8 kW

TableTop dimensions:

- PLS 120x65 cm

- PL 130x80 cm

- PLM 180x90 cm

Overall machine dimensions:

- PLS 140x82x78:95 cm

- PL 160x95x78:95 cm

- PLM 200x95x78:95 cm

Simons Framar ::

Portable light duty non-suction, non-heated superior ironing table with iron stand. Features include 122 cm x 35 cm ironing surface with cover and padding, varnished folding steel tube frame with automatically adjustable steel top.

Steamers ::

Clothes Steamers often preferred over a traditional hand iron for their ease of use and functionality. Wrinkles are wiped away quickly and easily with a strong continuous flow of warm moist steam.

So whether you are a technician operating a large professional shop, a world-class globetrotter looking for a portable travel steamer or a home owner looking for that personal professionalism

Page 20: Pressing Advancement

when using a personal clothes steamer, you will quickly depend on the Steamer's quality for dozens of tasks.

SIMONS Garment Steamer - Model 203 ::

Page 21: Pressing Advancement

The powerful Simons Steamer. Use it on clothing, drapery, furniture and any fabric to remove wrinkles quickly and easily. Steamers remove wrinkles while being gentle on the fabric. Your Simons Steamer with proper maintenance will last through years of demanding use.

-Warm, moist steam removes wrinkles from your personal wardrobe helping to reduce dry cleaning bills.

-Care for delicate and difficult-to-treat apparel in a matter of minutes.

-Hang pants by the cuff for quick and easy wrinkle removal.

- FEATURES -

3.2 Litre water bottle

Quick 2-minute heat-up time

1350 watt heating element

2 hours operation between fills

good quality castors able to swivel 360

Page 22: Pressing Advancement

lint removing brush on steam wand head

simple on/off switch operation

low water level alarm & auto cut out

- TECHNICAL DATA -

Electrical Power240V / 50Hz

Rated Power 1350W

Water Volume 3.2 Litres

Continuous Operation 2 Hours

Hose Length 1600 mm

Steam Temperature 98 C

Net Weight 7.1 kg

Gross Weight 8.1 kg

:: Trevilpress - 6003 Series ::

Page 23: Pressing Advancement

The new line of presses respond to several needs.

- Balanced upper board for a supple alignment of the boards.

- Upper board descent through pedals with hand safety frame.

- Mobile and pneumatic control pedals.

:: Technical Data ::

Ironing press with universal surfaces equipped with hand safety frame feature. Optionals: boiler aspirator iron.

Electrical power supply: 400v 50hz

Steam pressure: 500 kPa (5 bar)

Steam consumption: 15÷20kg/h

Aspirator connection: Ø 100 mm

Suction pressure: 250mm h20

Page 24: Pressing Advancement

Suction consumption: 400M3/h

Water supply: Ø 16 mm

Boiler discharge: 1/2"

Aspirator discharge: Ø 100 mm

Boiler resistance: 12÷15kW

Suction motor: 0,45kw

Pump motor: 0,55kw

Overall dimensions: 130x120 cm

Net weight: 360kg

Gross weight: 400kg

Packing dimensions: 140x115x140 cm

Volume: 2,25 m3

:: Roller Ironers ::

Roller ironers, since their first appearance, arose interest and appreciations for their originality, for the quality of finishing and innovative technological solutions. From the commercial point of view, these products grant to Distributors an exclusiveness image, not being confusable with others already present on the Market. A series of international Patents protects the originality of mechanical system, while aesthetic, constantly improved, consents a charming product presentation.

Roller ironers are identified through their diameter and roller length. These dimensions, together with heating power and other technical characteristics, determine machine performances.

:: Series 20 ::

Page 25: Pressing Advancement

The Series 20 is divided into GMP 1000 and GMP 1200

These models are the smallest GMP produces. Marking sign of these ironers is the extreme constructive simplicity, which makes them the ideal products for a sporadic use. Usually matched with small washing machines and dryers they allow ironing linen with residual moisture up to 25%.

Simple to use and absolutely safe also for operators having little expertise, they grant good performances and ironing quality, further to long time gaps between maintenance interventions thanks to the reduced number of mechanical components. A lot of space can be saved thanks to their reduced dimensions and the frontal return of ironed linen

Technical data

GMP 1000 GMP 1200

ROLLER DIMENSIONS

Ø200x1000 mm Ø200x1200 mm

IRONING SPEED 3,3 m/min 3,3 m/min

SUPPLYV.230/1+N/50Hz - V.400/3+N/50Hz

V.230/3+N/50Hz - V.400/3+N/50Hz

HEATING POWER 4,6 kW 5,6 kW

TOTAL POWER 4,78 kW 5,78 kW

ABSORPTION 24 A - 8,5 A 17 A - 10 A

HOURLY OUTPUT 20 kg 25 kg

Page 26: Pressing Advancement

IRONER DIMENSIONS

1305x420x993 mm 1505x420x933 mm

PACKING DIMENSIONS

1420x540x1120 mm - 0,86 m³ 1620x540x1120 mm - 0,98 m³

NET/GROSS WEIGHT74 / 85,5 kg 80,5 / 93 kg

:: Series 25 ::

The Series 25 is divided into GMP 100/25, GMP 120/25, GMP 1400ES and GMP 1400ES.

The range of ironers with roller diameter 250 mm is the natural evolution of smaller models GMP 1000 and GMP 1200. During last years markets in which GMP is operating refer to these models as the most suitable products for little integrated laundry (a laundry installation inside a predominant activity). Thanks to their very simple and practical use and to the extreme competitiveness of acquisition and operating costs these ironers allow obtaining better performances and ironing quality than smaller models without renouncing to maximum safety for operators. In comparison to models of series 20, the range 25 has got a larger ironing surface, a higher ironing pressure and a bigger heating power. To these, other characteristics must be added for GMP 1400ES.A. Analysing the name of this model, GMP 1400ES.

"ES" means Energy Saving, to indicate a study purposely done to obtain good performances saving electrical energy (only 7,5 Kw power), while the initial "A" indicates the presence of an efficacious

Page 27: Pressing Advancement

exhaust suction system (application typical of products with bigger dimensions), which allows obtaining higher output and saves roller padding from hydrolysis effects. The model GMP 1400ES.A in particular, represents a link with the range of professional machines (with roller diameter 300 mm), being planned for users of middling size. Equipped with double switch pedal, second ironing speed and exhaust suction system it offers great performances and mechanical reliability, minimizing operating and maintenance costs. Last but not least feature of this model is the great competitiveness in comparison to similar models already present on the market.The series 25 includes four basis-model that, to satisfy most exigent markets, GMP can equip with accessories planned and expressly realised thanks to our experience to obtain performances, which can satisfy specific needs of final customer.

Technical data

GMP 100/25 GMP 120/25 GMP 1400ES*

ROLLER DIMENSIONS

Ø250x1000 mm Ø250x1200 mm Ø250x1400 mm

IRONING SPEED 3,8 m/min 3,8 m/min 3,8 m/min

SUPPLYV.230/3+N/50Hz - V.400/3+N/50Hz

V.230/3+N/50Hz - V.400/3+N/50Hz

V.230/3+N/50Hz - V.400/3+N/50Hz

HEATING POWER

6 kW 6,9 kW 7,5 kW

TOTAL POWER 6,18 kW 7,08 kW 7,68 kW

ABSORPTION 18 A - 10,5 A 20,5 A - 12 A 21,5 A - 13 A

HOURLY OUTPUT

25 kg 30 kg 35 kg

IRONER DIMENSIONS

1440x420x1003 mm 1640x420x1003 mm 1840x420x1003 mm

PACKING DIMENSIONS

530x1560x1160 mm - 0,96 m³

530x1760x1160 mm - 1,08 m³

530x1960x1160 mm - 1,21 m³

NET/GROSS WEIGHT

94 / 119 kg 100 / 124 kg 106 / 128 kg

Page 28: Pressing Advancement

:: Series 30 ::

The Series 30 is divided into GMP 1400, GMP 1600 and GMP 2000.AWith these models, equipped with roller diameter 300 mm, we enter in the range of GMP professional products. Planned for a continuous and professional use, they fulfil requirements of solidity and reliability and offer high output (superior the average) and low using costs. This, together with the using simplicity and the high safety level for the operator, has allowed our ironers to assert successfully even in the most exigent markets. The components (electronic thermostat T2SK, heating elements, roller padding, etc.), studied to respond to the solicitations, which are typical of the use of these machines, grant a constant production both for quality and quantity and reduce maintenance interventions. These models can count on a complete range of rational and economic accessories such as exhaust suction system, variable speed, exclusive roller paddings realized with lamellar springs, introduction and expulsion belt conveyors.

Technical data

GMP 1400 GMP 1600 GMP 2000.A

ROLLER DIMENSIONS

Ø300x1400 mm Ø300x1600 mm Ø300x2000 mm

IRONING SPEED 2,7 - 4,3 m/min 2,7 - 4,3 m/min 2,7 - 4,3 m/min

VARIABLE SPEED 1,8 ÷ 4,6 m/min 1,8 ÷ 4,6 m/min 1,8 ÷ 4,6 m/min

SUPPLYV.230/3+N/50Hz - V.400/3+N/50Hz

V.230/3+N/50Hz - V.400/3+N/50Hz

V.230/3+N/50Hz - V.400/3+N/50Hz

HEATING POWER 9,9 kW 11,4 kW 15 kW

TOTAL POWER 10,82 kW 12,32 kW 15,92 kW

ABSORPTION 32 A - 19,5 A 36,5 A - 21 A 46 A - 26 A

HOURLY OUTPUT 40 kg 50 kg 55-60 kg

EXHAUST SUCTION

80m³/h 80 m³/h 80 m³/h

Page 29: Pressing Advancement

CAPACITY

EXHAUST SUCTION DIMENSIONS

Ø75x55 mm Ø75x55 mm Ø75x55 mm

IRONER DIMENSIONS

1890x552x1073 mm 2090x552x1073 mm 2490x552x1073 mm

PACKING DIMENSIONS

2000x660x1250 mm - 1,65m³

2200x660x1250 mm - 1,82m³

2600x660x1250 mm - 2,15 m³

NET/GROSS WEIGHT

209 / 232 kg 221 / 245 kg 243 / 271 kg

:: Series G ::

The series G is divided into G 15-35, G 18-35. G 21-35, G 12-25 and G 14-25.

These new models of drying ironers are gas heated and were born from GMP experiences in the field of thermoregulation, from over a year of laboratory tests and from a planning careful to basic-parameters. Among them, constructive simplicity, maximum efficiency in the components and quality results superior to what already present on the market. Equipped with frontal linen return and characterised by a particularly compact structure, these ironers can be positioned at few centimetres from the wall, allowing working in little space but comfortably and in safety. The machines of series "G" have a rotary roller hauled by drying belts purposely created.

The combustion chamber created inside the roller is heated by an innovative titanium-steel burner, which we believe being nowadays the most performing and reliable in our sector. A long research, realised by a primary Brand in the burner sector and developed in cooperation with our technical department, has allowed to optimise combustion through the right exhaust fumes suction and the distribution of power along the whole roller surface.

The burner surface is realized with laser for a perfect flame distribution, while inside are installed the components creating the so called "Venturi effect", at the base of the excellent results of "G" range. Also for the version with electric heating GMP has used the experience of a big manufacturer, obtaining results, which are superior to the actual market level in terms of performances and duration of the single components. To the technical solutions we must add the extreme care of the

Page 30: Pressing Advancement

details and the quality of the materials chosen by GMP. The technical and project choice of this version offers further advantages, such as, by way of example, the reduced maintenance costs thanks to the simplicity of the system.

The belts keep constant the pressure over the roller, thanks to the quality of Nomex material and to an efficacious tensioning system.

Pressure, together with heating power and temperature regulation is one of the basic parameters to consider the quality and the efficiency of an ironing machine. Exhaust fumes and vapours suction systems are separated, following the most recent norms concerning pollution and safety on working place. Every component of these systems has been dimensioned and tested to grant efficiency and safety. The ironing speed can be regulated from 1,6 to 5 m/min, using last generation motors and inverter. Thermoregulation and heating power control are the strong points of "G" series.The electronic thermostat has been studied by GMP for obtaining great precision and saving energy with performances superior the average. The heating power is controlled trough quality products, hardly tested during the certification. Innovative solutions have allowed us to obtain a rapid answer to temperature subtraction without creating that costly thermal inertia which negatively weights on machine performances.

The burner ignition and shutdown during work are obtained by pressing a comfortable pedal, which also has the function of "rapid stop", as safety device. The safety devices planned for "G" range go farther than EC directives, including split devices, safety thermostats purposely calibrated, pressure switches on the fumes exhaust system and an electrical system modernly planned and easy to inspect, which is installed separately from gas components location.

The ironers are aesthetically pleasant and solid, with a strong structure in electro-zinc plated plate, epoxy powder painted. Controls are easy to identify and to reach. GMP's traditional constructive planning, already shown with the electric-heated products, finds its confirmation in this range of products, for instance in the facility of access to a great part of mechanical components, with minimum equipment and waste of time.“G” range, tested by the certifying society 0063, has obtained EC certification with excellent results.

Technical data

G 15 - 35 G 18 - 35 G 21 - 35 G 12 - 25 G 14 - 25

ROLLER DIMENSIONS

Ø325x1500 mmØ325x1800 mmØ325x2100 mm1200 x Ø 270 mm

1450 x Ø 270 mm

IRONING SPEED 1,6 ÷ 5 m/min 1,6 ÷ 5 m/min 1,6 ÷ 5 m/min 0,8 ÷ 3 m/min 0,8 ÷ 3 m/min

GAS CONNECTION

1/2" 1/2" 1/2" 1/2" 1/2"

HOURLY OUTPUT32-34 kg - r.h. 50-54%

38-40 kg - r.h. 50-54%

44-46 kg - r.h. 50-54%

20 kg/h (r.h. 50%)

24 kg/h (r.h. 50%)

Page 31: Pressing Advancement

SUPPLY TENSIONV.400/3+N/50Hz

V.400/3+N/50Hz

V.400/3+N/50Hz

V.230/1/50Hz (gas)V.400/3N/50Hz (electric)

V.230/1/50Hz (gas)V.400/3N/50Hz (electric)

THERMAL CAPACITY (gas heating)

22 kW 25,6 kW 27 kW 11,2 kW 13,6 kW

HEATING POWER (electrical heating)

18 kW 23,4 kW 23,4 kW 9 kW 12 kW

CALENDER DIMENSIONS

550x2010x1100 mm

550x2340x1100 mm

550x2640x1100 mm

510x1805x1080H mm

510x2010x1080H mm

MOTORS POWER 1 kW 1 kW 1 kW 0,37 kW 0,37 kW

PACKING DIMENSIONS

640x2100x1400 mm1,88 m³ - 474 kg

640x2440x1400 mm2,19 m³ - 520 kg

640x2840x14000 mm2,54 m³ - 580kg