Press Release - Custom Products of Litchfield, Inc. · Custom Products of Litchfield, Inc. · Box...

2
Custom Products of Litchfield, Inc. · Box 718 · Litchfield, MN 55355 · www.800cabline.com Press Release For Immediate Release Date: Fall 2006 CP Show Contacts: Randy Reinke 612-386-3443 Jim Cottington 612-695-9599 Harley Davenport 612-805-9140 CP Office Contacts: Dennis Witthus 320-693-4817 Jim Schmitt 320-693-4870 SUCCESSFUL DESIGN AND TEST OF ISO DIS 21299 ROPS STANDARD COMPLETED Custom Products of Litchfield, Inc. recently completed its first successful design and test of an economical, lightweight, non-folding, low vertical clearance ISO DIS 21299 ROPS (Roll-Over Protective Structure). The advantages of the ISO DIS 21299 ROPS design alternatives, versus conventional SAE or OSHA ROPS, may reduce turf maintenance machine users' resistance to the application of ROPS to their equipment. ISO (International Standards Organization) recently published a new draft ROPS qualifi- cation procedure to enhance the safety of operators of powered ride-on turf mainte- nance equipment. Prior to this, there was no specific ROPS standard for these prod- ucts. Under the support of OPEI (Outdoor Power Equipment Institute), a panel was formed that brought together an international group of ROPS experts that presented the best learned practices regarding off-highway vehicle operator crush protection. The result of this undertaking is a standard dedicated to protecting operators of powered ride-on turf maintenance equipment. ISO DIS (Draft International Standard) 21299 will be the first ROPS standard specifically developed for turf maintenance equipment. It has factored in various configurations of powered ride-on turf maintenance equipment and is scaled to the weight and geometry of this specialized equipment. The CPSC (Consumer Products Safety Commission) recognized the 'tip-over' hazard associated with the use of 'riding mowers and garden tractors' over 30 years ago, states Jim Schmidt, Director of Engineering and Regulatory Compliance at Custom Products of Litchfield, Inc. "Yet the type or form of the recommended operator protective device is still undefined. This new standard will allow the industry to develop their own compli- ance standards, before the domestic and foreign regulators impose their own versions of appropriate mower ROPS standards." The ISO DIS 21299 ROPS test model developed by Custom Products of Litchfield, Inc. will be on display at both the EXPO and GIE Tradeshows in October and November of 2006. Industry experts will also be on hand to discuss the benefits and drawbacks of the ISO DIS 21299 ROPS standard.

Transcript of Press Release - Custom Products of Litchfield, Inc. · Custom Products of Litchfield, Inc. · Box...

Custom Products of Litchfield, Inc. · Box 718 · Litchfield, MN 55355 · www.800cabline.com

Press Release

For Immediate Release Date: Fall 2006

CP Show Contacts:Randy Reinke 612-386-3443Jim Cottington 612-695-9599Harley Davenport 612-805-9140

CP Office Contacts:Dennis Witthus 320-693-4817Jim Schmitt 320-693-4870

SUCCESSFUL DESIGN AND TEST OF ISO DIS 21299 ROPS STANDARD COMPLETED

Custom Products of Litchfield, Inc. recently completed its first successful design and testof an economical, lightweight, non-folding, low vertical clearance ISO DIS 21299 ROPS(Roll-Over Protective Structure). The advantages of the ISO DIS 21299 ROPS designalternatives, versus conventional SAE or OSHA ROPS, may reduce turf maintenancemachine users' resistance to the application of ROPS to their equipment.

ISO (International Standards Organization) recently published a new draft ROPS qualifi-cation procedure to enhance the safety of operators of powered ride-on turf mainte-nance equipment. Prior to this, there was no specific ROPS standard for these prod-ucts. Under the support of OPEI (Outdoor Power Equipment Institute), a panel wasformed that brought together an international group of ROPS experts that presented thebest learned practices regarding off-highway vehicle operator crush protection. Theresult of this undertaking is a standard dedicated to protecting operators of poweredride-on turf maintenance equipment.

ISO DIS (Draft International Standard) 21299 will be the first ROPS standard specificallydeveloped for turf maintenance equipment. It has factored in various configurations ofpowered ride-on turf maintenance equipment and is scaled to the weight and geometryof this specialized equipment.

The CPSC (Consumer Products Safety Commission) recognized the 'tip-over' hazardassociated with the use of 'riding mowers and garden tractors' over 30 years ago, statesJim Schmidt, Director of Engineering and Regulatory Compliance at Custom Products ofLitchfield, Inc. "Yet the type or form of the recommended operator protective device isstill undefined. This new standard will allow the industry to develop their own compli-ance standards, before the domestic and foreign regulators impose their own versionsof appropriate mower ROPS standards."

The ISO DIS 21299 ROPS test model developed by Custom Products of Litchfield, Inc.will be on display at both the EXPO and GIE Tradeshows in October and November of2006. Industry experts will also be on hand to discuss the benefits and drawbacks ofthe ISO DIS 21299 ROPS standard.

Custom Products of Litchfield, Inc. · Box 718 · Litchfield, MN 55355 · www.800cabline.com

Press Release

Diagram of ISO DIS 21299 ROPS standard application.

Photograph of ISO DIS 21299 ROPS standard once applied to actual equipment.