PRESS FITTINGS FOR STEEL PIPE LIST PRICE · PDF filepress fittings for steel pipe list price...

PRESS FITTINGS FOR STEEL PIPE

LIST PRICE BOOK

MALLEABLE CAST IRON PRESS FITTINGSFOR SCH. 10 – 40 BLACK & GALVANIZED STEEL PIPE

Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.comMKT-23_v3 • 09/12 Prices Effective 01/1/2012

FASTLOCK™ fittings are not currently approved for use with gas or fire protection applications.

09/12

FASTLOCK™ fittings provide the quickest and easiest way to connect schedules 10 through 40 black and galvanized ASTM A53 compliant steel pipe.

FASTLOCK™ fittings are available in a complete range of sizes from ½" – 2".

FASTLOCK™ fittings install without the use of threading dies, pipe seal-ants, or pipe wrenches; significantly reducing average installation time, saving time and money. Because they connect without wrenches, FAST-LOCK™ fittings reduce stress on joists and hangers during installation.

FASTLOCK™ press Jaws have an integral indent feature to ensure fast recognition of pressed valves prior to pressure testing.

FASTLOCK™ press jaws are compatible with most press tools on the market, including Ridgid®, Rothenberger®, REMS®, and Stanley® VIRAX®.

FASTLOCK™ fittings feature a special-ized, corrosion-resistant, malleable cast iron body with stainless steel fastening rings and EPDM sealing gaskets.

Applications include water, HVAC, and compressed air systems.

ISO Certified, IAPMO Approved, NSF 61-4 Certified

From Cimberio Valve • Phone: 877.228.9246 • Fax: 877.232.9246 • E-mail: [email protected] • www.fastlockfittings.com


Pipes for FASTLOCK™

FASTLOCK™ fittings are for use with ASTM A53 compliant ½" – 2" schedule 10 through schedule 40 black and galvanized steel pipe only.

Press Tools for FASTLOCK™

FASTLOCK™ fittings must be used with FASTLOCK™ approved press jaws only. FASTLOCK™ jaws are compatible with press tools from Ridgid®, Rothenberger®, REMS®, and Stanley® VIRAX®. The press tool must be for sizes up to 2" with a press force of at least 32kN and operating either at 110 volts or on battery power.

Operating ParametersOperating Temperature: 0˚ – 250˚ FMaximum Operating Pressure: 200 PSI

WarrantyFASTLOCK™ fittings carry a 50 year limited warranty against defects in material and workmanship when properly installed and used under normal circumstances.

ApprovalsISO 9001:2000 CertifiedIAPMO Approved: Uniform Plumbing CodeNSF-61-4 Certified

THE QUICKEST & EASIEST WAY TO CONNECT STEEL PIPE

After Press ConnectionPressing Area

EPDM Gasket

316 Stainless Steel Ring

ASTM A53 Steel Pipe

Pressing Area

EPDM Gasket

316 Stainless Steel Ring

ASTM A53 Steel Pipe

Before Press Connection

FASTLOCK™ fittings are made from malleable cast iron. The annealing process used in their manufacturing provides them with a greater malleability well suited for press connections. During manufacturing, all FASTLOCK™ fittings are hot-dipped in 99.99% pure, molten zinc. This process completely coats the fittings’ surface inside and outside, giving them additional strength and providing a resistance to oxide corrosion, making them excellent for use in drinking water systems.

FASTLOCK™ fittings ensure a tightly sealed connection utilizing a pre-assembled sealing gasket and stainless steel gripping ring. The thick EPDM sealing gasket provides a wide contact surface between the fitting and the pipe, ensuring the con-nection is air and water tight after pressing. The AISI 316L stainless steel ring grips the pipe and prevents it from pulling out, even in cases of very high pressure. Tabs on the fitting end retain the sealing gasket and stainless steel gripping ring.

The diagram below illustrates how all of these features provide FASTLOCK™ fittings with a strong and secure press connection.

Stainless Steel Gripping Ring

Tabs EPDM Gasket

Stop

Malleable Cast Iron Body

Zinc Coating

09/12

NOTE: Connections MUST be made on ASTM A53 compliant pipe using FASTLOCK™ approved jaws ONLY. The instructions above are provided as a brief overview of the installation process. Before using any FASTLOCK™ products, read the complete Technical Manual. Complete installation instructions can be found in the Technical Manual or at www.fastlockfittings.com



QUICK & EASY INSTALLATION

ORDERING INFORMATION

Verify the outside diameter of the pipe is compliant to ASTM A53 standards. Cut the pipe perpendicular to its axis.

Mark the insertion depth on the pipe. Insert the pipe into the fitting until it makes contact with the stop.

Deburr the end of the pipe to avoid damaging the gasket. Make sure the pipe is free of debris, rust, paint, scale, etc.

Complete the press connection using FASTLOCK™ jaws in accordance with your press tool’s instructions.

Verify the presence, integrity and correct positioning of the gasket and metal ring. If necessary, lubricate the pipe and fitting with approved silicone spray.

Verify the press connection.

1 2 3

4 65

FASTLOCK™ fittings are available from Cimberio Valve Company, Inc.

Freight Policy: Cimberio Valve standard freight terms apply to all orders placed for delivery to a single destination in the conti-nental United States. Contact your local distributor for specific details. Otherwise, freight items are F.O.B. Malvern, Pennsylvania 19355. To read Cimberio Valve’s complete freight policy, visit us online at www.cimberiovalve.com and click on the “Policies” link at the bottom of the page.

Order Acceptance: Orders are accepted by fax (877-232-9246) or e-mail ([email protected]). Possession of any of our catalogs or list price books by any person is not to be construed as an offer to sell to that person. All prices are subject to change without notice.

Minimum Order: There is NO minimum order at Cimberio Valve.

Payment Terms: All invoice terms are Net 30 from the date of Cimberio Valve invoices. Invoices may now be paid by credit card. Cimberio Valve accepts Visa, MasterCard, and Discover. Before paying by credit card you must fax a completed Credit Card Autho-rization Form to us at 877-232-9246. This form can be downloaded from www.cimberiovalve.com on the “Policies” page (the link appears on the bottom of the page) or you can request the form by phone at 877-228-9246.

FASTLOCK™ Fittings Are Available Through Wholesalers Only

09/12



Press: Female Press Socket Joint • P.E.: Male Plain End • MIPT: Male Iron Pipe Thread • FIPT: Female Iron Pipe Thread

Contractors Earn Points Towards FREE FASTLOCK™ Products with the

“Get To The Point” Program!Visit www.fastlockfittings.com for more information.

FASTLOCK™ Tools

Part No. Description Price

VALBFKIT01½" – 1" Kit (Includes: ½" Jaws, ¾" Jaws, 1" Jaws,

Pipe Gauge, Pipe Deburrer, and Carrying Case)$696.38

53463-8641 ½" Jaws Only $172.80

53463-8651 ¾" Jaws Only $209.09

53463-8661 1" Jaws Only $212.54

VALBFKIT021¼" – 2" Kit (Includes: 1¼" Collar, 1½" Collar, 2" Collar, 1¼" – 2" Actuator, Pipe Gauge, Pipe

Deburrer, and Carrying Case)$4,222.21

53463-8680 1¼" – 2" Actuator Only $200.45

53463-8671 1¼" Collar Only $1,251.07

53463-8681 1½" Collar Only $1,258.24

53463-8691 2" Collar Only $1,301.18

53105-0105 Pipe Deburrer Only $59.73

1½" COLLAR1¼" COLLAR 2" COLLAR

1½1¼ 2

½" JAWS ¾" JAWS 1" JAWS

½ ¾ 1

ACTUATOR PIPE DEBURRER

Item No. 130Tee: Press Run x Press Branch

SizeBlack Galvanized Carton

Qty.Part No. Price Part No. Price

½" 130BLK-04 $8.37 130HDG-04 $9.12 50

¾" 130BLK-06 $12.27 130HDG-06 $13.37 30

1" 130BLK-07 $16.01 130HDG-07 $17.45 20

1¼" 130BLK-08 $30.79 130HDG-08 $32.91 10

1½" 130BLK-09 $43.25 130HDG-09 $44.90 8

2" 130BLK-10 $58.24 130HDG-10 $60.46 5

PRESSPRESS

PRESS

FASTLOCK™ PRESS FITTINGS

Item No. 90 90˚ Elbow: Press x Press



½" 90BLK-04 $6.46 90HDG-04 $7.04 80

¾" 90BLK-06 $8.52 90HDG-06 $9.29 50

1" 90BLK-07 $12.96 90HDG-07 $14.13 30

1¼" 90BLK-08 $22.10 90HDG-08 $23.62 20

1½" 90BLK-09 $32.16 90HDG-09 $33.39 15

2" 90BLK-10 $52.56 90HDG-10 $54.58 8

PRESS

PRESS

09/12




Item No. 270Coupling: Press x Press



½" 270BLK-04 $4.36 270HDG-04 $4.75 100

¾" 270BLK-06 $6.38 270HDG-06 $6.96 70

1" 270BLK-07 $8.93 270HDG-07 $9.74 50

1¼" 270BLK-08 $15.56 270HDG-08 $16.95 30

1½" 270BLK-09 $17.70 270HDG-09 $19.30 20

2" 270BLK-10 $26.49 270HDG-10 $28.86 10

PRESS PRESS

Item No. 133 Tee - Reducing: Press Run x Reduced Press Branch This item is currently in production and may be supplied as a 130 Tee and 247 Adapter if fitting is unavailable.

Size (Run x Branch)

Black Galvanized Carton Qty.Part No. Price Part No. Price

¾" x ½" 133BLK-0604 $11.58 133HDG-0604 $12.76 30

1" x ½" 133BLK-0704 $16.45 133HDG-0704 $18.12 20

1" x ¾" 133BLK-0706 $14.46 133HDG-0706 $18.12 20

1¼" x ½" 133BLK-0804 $22.83 133HDG-0804 $25.11 10

1¼" x ¾" 133BLK-0806 $24.45 133HDG-0806 $26.89 10

1¼" x 1" 133BLK-0807 $25.48 133HDG-0807 $28.05 10

1½" x ½" 133BLK-0904 $38.90 133HDG-0904 $42.78 8

1½" x ¾" 133BLK-0906 $36.68 133HDG-0906 $40.35 8

1½" x 1" 133BLK-0907 $37.96 133HDG-0907 $41.76 8

1½" x 1¼" 133BLK-0908 $40.52 133HDG-0908 $44.57 8

2" x ½" 133BLK-1004 $63.10 133HDG-1004 $69.39 5

2" x ¾" 133BLK-1006 $61.97 133HDG-1006 $68.19 5

2" x 1" 133BLK-1007 $65.20 133HDG-1007 $71.72 5

2" x 1¼" 133BLK-1008 $67.52 133HDG-1008 $74.26 5

2" x 1½" 133BLK-1009 $68.45 133HDG-1009 $75.30 5

REDUCED PRESS

PRESS PRESS

Item No. 272Coupling: Press x FIPT



½" 272BLK-04 $11.66 272HDG-04 $12.71 100

¾" 272BLK-06 $13.51 272HDG-06 $14.73 70

1" 272BLK-07 $21.60 272HDG-07 $23.55 50

1¼" 272BLK-08 $32.97 272HDG-08 $35.94 30

1½" 272BLK-09 $50.58 272HDG-09 $55.13 20

2" 272BLK-10 $69.48 272HDG-10 $75.74 10

FEMALE THREADPRESS

Item No. 271Slip Coupling: Press x Press



½" 271BLK-04 $7.15 271HDG-04 $7.79 100

¾" 271BLK-06 $9.67 271HDG-06 $10.54 70

1" 271BLK-07 $12.80 271HDG-07 $14.23 50

1¼" 271BLK-08 $16.45 271HDG-08 $18.46 30

1½" 271BLK-09 $23.60 271HDG-09 $26.95 20

2" 271BLK-10 $29.19 271HDG-10 $33.34 10

PRESS PRESS

SLIP

Item No. 274Coupling: Press x MIPT This item is currently in production and may be supplied as a 270 Coupling and 240 Adapter if fitting is unavailable.



½" 274BLK-04 $8.25 274HDG-04 $8.41 70

¾" 274BLK-06 $13.93 274HDG-06 $14.18 50

1" 274BLK-07 $22.26 274HDG-07 $22.71 40

1¼" 274BLK-08 $30.71 274HDG-08 $31.32 30

1½" 274BLK-09 $32.94 274HDG-09 $33.59 20

2" 274BLK-10 $41.60 274HDG-10 $42.41 10

MALE THREADPRESS


09/12




Item No. 247Adapter: P.E. (a) x Reduced Press (b)

Size (a x b)


¾" x ½" 247BLK-0604 $9.42 247HDG-0604 $10.17 100

1" x ½" 247BLK-0704 $12.16 247HDG-0704 $13.13 70

1" x ¾" 247BLK-0706 $12.79 247HDG-0706 $13.81 70

1¼" x ½" 247BLK-0804 $20.26 247HDG-0804 $21.88 50

1¼" x ¾" 247BLK-0806 $21.26 247HDG-0806 $22.96 50

1¼" x 1" 247BLK-0807 $22.33 247HDG-0807 $24.11 50

1½" x ½" 247BLK-0904 $22.71 247HDG-0904 $24.53 50

1½" x ¾" 247BLK-0906 $23.83 247HDG-0906 $25.74 50

1½" x 1" 247BLK-0907 $25.03 247HDG-0907 $27.03 50

1½" x 1¼" 247BLK-0908 $36.49 247HDG-0908 $39.41 30

2" x ½" 247BLK-1004 $31.51 247HDG-1004 $34.03 30

2" x ¾" 247BLK-1006 $33.09 247HDG-1006 $35.73 30

2" x 1" 247BLK-1007 $34.75 247HDG-1007 $37.53 30

2" x 1¼" 247BLK-1008 $26.28 247HDG-1008 $28.38 20

2" x 1½" 247BLK-1009 $38.32 247HDG-1009 $41.39 20

MALE PLAIN END (a)

REDUCED PRESS END (b)

Item No. 240Adapter: P.E. x MIPT



½" 240BLK-04 $4.59 240HDG-04 $5.00 100

¾" 240BLK-06 $10.62 240HDG-06 $11.58 100

1" 240BLK-07 $15.25 240HDG-07 $16.62 100

1¼" 240BLK-08 $18.71 240HDG-08 $20.39 40

1½" 240BLK-09 $23.48 240HDG-09 $25.59 35

2" 240BLK-10 $29.84 240HDG-10 $32.54 15

MALE PLAIN END

MALE THREAD

Item No. 529Adapter: FIPT x P.E.



½" 529BLK-04 $7.26 529HDG-04 $7.91 100

¾" 529BLK-06 $11.27 529HDG-06 $12.29 100

1" 529BLK-07 $15.25 529HDG-07 $16.62 100

1¼" 529BLK-08 $19.30 529HDG-08 $21.03 40

1½" 529BLK-09 $24.28 529HDG-09 $26.46 30

2" 529BLK-10 $34.06 529HDG-10 $37.11 15

MALE PLAIN END

FEMALE THREAD


Item No. 276Coupling - Reducing: Press x Reduced Press This item is currently in production and may be supplied as a 270 Coupling and 247 Adapter if fitting is unavailable.



¾" x ½" 276BLK-0604 $9.34 276HDG-0604 $10.28 50

1" x ½" 276BLK-0704 $9.77 276HDG-0704 $10.84 30

1" x ¾" 276BLK-0706 $10.20 276HDG-0706 $11.21 30

1¼" x ½" 276BLK-0804 $13.50 276HDG-0804 $14.98 20

1¼" x ¾" 276BLK-0806 $13.80 276HDG-0806 $15.32 20

1¼" x 1" 276BLK-0807 $14.50 276HDG-0807 $15.96 20

1½" x ½" 276BLK-0904 $17.33 276HDG-0904 $19.24 10

1½" x ¾" 276BLK-0906 $19.26 276HDG-0906 $21.38 10

1½" x 1" 276BLK-0907 $20.94 276HDG-0907 $23.24 10

1½" x 1¼" 276BLK-0908 $21.73 276HDG-0908 $23.93 10

2" x ½" 276BLK-1004 $22.09 276HDG-1004 $24.30 8

2" x ¾" 276BLK-1006 $22.87 276HDG-1006 $25.16 8

2" x 1" 276BLK-1007 $23.22 276HDG-1007 $25.54 8

2" x 1¼" 276BLK-1008 $23.97 276HDG-1008 $26.36 8

2" x 1½" 276BLK-1009 $24.29 276HDG-1009 $26.73 8

PRESS REDUCED PRESS

09/12




SPECIAL ORDER FASTLOCK™ PRESS FITTINGS

Item No. 9390˚ Elbow: Press x FIPT



½" 93BLK-04 $8.90 93HDG-04 $9.70 80

¾" 93BLK-06 $13.87 93HDG-06 $15.12 50

1" 93BLK-07 $21.87 93HDG-07 $23.84 30

1¼" 93BLK-08 $36.05 93HDG-08 $38.52 20

1½" 93BLK-09 $50.82 93HDG-09 $52.76 15

2" 93BLK-10 $70.04 93HDG-10 $72.72 8

FEMALE THREAD

PRESS

Item No. 9290˚ Elbow: Press x MIPT



½" 92BLK-04 $10.88 92HDG-04 $11.86 80

¾" 92BLK-06 $14.94 92HDG-06 $16.29 40

1" 92BLK-07 $22.09 92HDG-07 $24.08 30

1¼" 92BLK-08 $37.58 92HDG-08 $40.15 20

1½" 92BLK-09 $51.30 92HDG-09 $53.25 15

2" 92BLK-10 $75.36 92HDG-10 $78.22 8

MALE THREAD

PRESS

Item No. 9190˚ Elbow: Press x P.E.



½" 91BLK-04 $8.71 91HDG-04 $9.49 80

¾" 91BLK-06 $11.95 91HDG-06 $13.03 40

1" 91BLK-07 $17.67 91HDG-07 $19.26 30

1¼" 91BLK-08 $30.06 91HDG-08 $32.12 20

1½" 91BLK-09 $41.03 91HDG-09 $42.60 15

2" 91BLK-10 $60.29 91HDG-10 $62.60 8

PRESS

MALE PLAIN END

Item No. 131 Tee - Reducing: Press Run x Reduced FIPT Branch This item is currently in production and may be supplied as a 130 Tee and 243 Adapter if fitting is unavailable.

Size (Run x Branch)


1" x ½" 131BLK-0704 $22.38 131HDG-0704 $24.40 20

1¼" x ½" 131BLK-0804 $28.86 131HDG-0804 $31.46 10

1½" x ½" 131BLK-0904 $39.23 131HDG-0904 $43.17 8

1½" x ¾" 131BLK-0906 $40.95 131HDG-0906 $45.05 8

2" x ½" 131BLK-1004 $49.02 131HDG-1004 $53.93 5

2" x ¾" 131BLK-1006 $56.30 131HDG-1006 $61.93 5

¾" x ½" 131BLK-0604 $15.60 131HDG-0604 $17.14 30

1" x ¾" 131BLK-0706 $24.98 131HDG-0706 $27.50 20

1¼" x ¾" 131BLK-0806 $30.24 131HDG-0806 $33.27 10

1¼" x 1" 131BLK-0807 $32.73 131HDG-0807 $36.01 10

1½" x 1" 131BLK-0907 $43.08 131HDG-0907 $47.39 8

1½" x 1¼" 131BLK-0908 $44.95 131HDG-0908 $49.43 8

2" x 1" 131BLK-1007 $61.21 131HDG-1007 $67.34 5

2" x 1¼" 131BLK-1008 $62.51 131HDG-1008 $68.77 5

2" x 1½" 131BLK-1009 $63.68 131HDG-1009 $70.06 5

REDUCED FEMALE THREAD

PRESS PRESS

Items on this page (91, 92, 93, 131) are special stock quantity. Please contact a sales represenative for

product availability.

From Cimberio ValvePhone: 877.228.9246 Fax: 877.232.9246

E-mail: [email protected]

www.fastlockfittings.com


INDUSTRIE METALLURGICHE SPOLETO SPA (IMS) warrants to wholesalers and licensed plumbing and mechanical contractors in the United States and Canada that:

• FASTLOCK™ Press System Fittings (“AFL” trademark) will be free from defects in materials and workmanship when properly installed and used under normal conditions for a period of 50 years from installation.

IMS is subject to the conditions and limitations contained in this warranty. Under this limited warranty, a claim can only be made if a manufacturing defect causes a leak or failure during the warranty period. This IMS warranty does not apply if a failure or any damage is caused by any of the following:

1. Products, parts or components not manufactured or sold by IMS.

2. Products not installed under recommended instructions (including but not limited to system design, installation, inspection or testing) provided by IMS or applicable code requirements.

3. Any damage caused in part or in whole by the following:

a. Improper handling and protection of the product before, during or after installation. Including but not limited to misuse, abuse, tampering, neglect or accidental damage.

b. Subjection to conditions outside acceptable operating ranges, including but not limited to temperature and pressure.

c. Acts of nature or natural disasters including, but not limited to fire, earthquakes, floods or lightning.

d. External environmental causes due to any external chemical or physical conditions, including but not limited to variation in water quality and aggressive water.

e. Any cause out of the control of IMS.

In the event of a leak or failure the property owner must contact IMS within thirty (30) days of the failure and create a warranty claim. The property owner must remove the product with at least six inches of pipe on each end (where applicable) and mail it at their expense to IMS. It is the burden on the property owner to make and pay for any repairs.

IMS will inspect and test the returned product and will notify the claim holder in writing in a reasonable amount of time the result of the diagnosis.

If it is found that the failure or leak was caused by a defect in material or workmanship, IMS will be responsible for the replacement of the part and/or reimbursement or repair. IMS’s liability under this warranty is limited ONLY to the repair and/or replacement of parts found to contain defect in material or workmanship. This does NOT include loss of business/profits, water damage, mold intrusion, etc... IMS is not liable for any other or consequential damage.

This warranty is in lieu of all other warranties, expressed or implied, including but not limited to implied warranties of merchant-ability. This is the only warranty provided for the FASTLOCK™ product. No agent of IMS (employees, distributors or other person or business) is authorized to create or modify this or any warranty on behalf of the IMS.

This limited warranty gives the product owner specific legal rights. The product owner may have other legal rights which vary from state to state.

WARRANTY ON FASTLOCK™ PRODUCT

PRESS FITTINGS FOR STEEL PIPE LIST PRICE · PDF filepress fittings for steel pipe list price...

Documents

Transcript of PRESS FITTINGS FOR STEEL PIPE LIST PRICE · PDF filepress fittings for steel pipe list price...