preshipment inspection services
9
QUALITY STANDARDS FOR INSPECTION AND EVALUATION http://www.asiatextileinspections.com
description
THERE ARE OBVIOUS ECONOMIC BENEFITS TO THE PRODUCTION OF THEIR GOODS IN CHINA OR ASIA, BUT SHOULD ALSO BE WELL AWARE OF THE QUALITY ISSUES THAT MAY ARISE. ALTHOUGH THE RACISM OF THE PAST ON SHODDY GOODS PRODUCED IN CHINA OR ASIA WERE MORE AMERICAN PROPAGANDA HARD FACTS, http://www.asiatextileinspections.com
Transcript of preshipment inspection services
QUALITY STANDARDS FOR
INSPECTION AND EVALUATION
http://www.asiatextileinspections.com
IN INDUSTRY PARLANCE, THE TERM "INSPECTION" GENERALLY REFERS TO THE ACTIVITY OF CONTROL PRODUCTS, WHILE THE "AUDIT" APPLIES TO THE ANALYSIS OF A MANUFACTURING ORGANIZATION.
ISO 2859 OF (DERIVED FROM MIL-STD 105 E) DEFINES AN INSPECTION AS AN "ACTIVITY SUCH AS MEASURING, EXAMINING, TESTING OR MEASURING ONE OR MORE CHARACTERISTICS OF A PRODUCT OR SERVICE AND COMPARING THE RESULTS WITH SPECIFIED REQUIREMENTS TO DETERMINE WHETHER CONFORMITY IS ACHIEVED FOR EACH CHARACTERISTIC. "
ITEMS CAN BE INSPECTED COMPONENTS USED FOR PRODUCTION, INVENTORY, AND WORK IN PROCESS OR FINISHED PRODUCTS. I WROTE THIS ARTICLE TO PROVIDE GUIDANCE TO IMPORTERS WHO BUY FINISHED GOODS
SUPPLIERS.
OBJECTIVES OF INSPECTION 1. FOR INFORMATION ON PRODUCT PERFORMANCE AS SET
STANDARDS
2. USING THE TECHNIQUE OF PRODUCTION, SUPPLY AND QUALITY CONTROL, ETC.
3. TO ADJUST THE POOR QUALITY OF THE PRODUCTS AND THUS MAINTAIN STANDARDS. ESTABLISH AND ENHANCE REPUTATION TO PROTECT CUSTOMERS FROM RECEIVING POOR QUALITY PRODUCTS.
4. IDENTIFY SOURCE OF WEAKNESS AND FAILURE IN THE FINISHED PRODUCTS AND THUS VERIFY THE DESIGNER WORK
http://www.asiatextileinspections.com
PURPOSE OF INSPECTION 1. TO DISTINGUISH THE GOOD LOTS OF BAD BATCHES. 2. TO DISTINGUISH THE GOOD FROM THE BAD PARTS. 3. IN DETERMINING WHETHER THE PROCESS IS CHANGING. 4. IN DETERMINING WHETHER THE PROCESS IS CLOSE TO THE
SPECIFICATION LIMITS. 5. TO EVALUATE THE PRODUCT QUALITY. 6. TO ASSESS THE ACCURACY OF INSPECTORS. 7. IN ORDER TO MEASURE THE ACCURACY OF THE MEASURING
INSTRUMENT. 8. TO ENSURE THAT THE PRODUCTS - DESIGN INFORMATION. 9. TO MEASURE PROCESS CAPABILITY.
http://www.asiatextileinspections.com
STAGES OF INSPECTION (1) INSPECTION OF MATERIAL ENTERING.
(2) AN INSPECTION OF PRODUCTION PROCESSES.
(3) INSPECTION OF FINISHED PRODUCTS .......
http://www.asiatextileinspections.com
WE PROVIDE SEVERAL INSPECTION
DEPENDING ON YOUR NEEDS
http://www.asiatextileinspections.com
1.) QUALITY CONTROL INSPECTION . 2.) AUDIT INSPECTION.
3.) ASIAN TEXTILE QUALITY PRODUCTS. 4.) PRODUCTION CHECK
INSPECTION. ETC….
WE HAVE OVER 100 QCS TO PERFORM INSPECTION AND AUDIT SERVICES IN CHINA, VIETNAM, CAMBODIA, INDONESIA, THAILAND, SOUTH KOREA, BANGLADESH, PAKISTAN, INDIA AND SRI LANKA.
http://www.asiatextileinspections.com
WE PROVIDE OUR SERVICES IN DIFFERENT COUNTRIES IN ASIA:
HTTP://WWW.ASIATEXTILEINSPECTIONS.COM/
YOU CAN ALSO PERSONALLY VISIT OUR COMPANY OR CONTACT US VIA WEB TO THE FOLLOWING ADDRESSES:
Asia Textile Inspections Limited: 15573 Marine Drive, White Rock, V4B 1C9 British Columbia, Canada Tel: +1-604-960-2399 Fax: +1-604-648-8449 Email: [email protected] www.asiatextileinspections.com
Asia Textile Inspections Limited
Address: Suite 1507 Kowloon Plaza,
485-Castle Peak Road, Kowloon,
HONG KONG Tel:
+852-2724-4786 Fax:
+852-2721-5786 Email:
Asia Textile Inspections S.L. Address: Pl. Salvat Papasseit 7 . 08221 Terrassa
SPAIN Tel: +34-63-098-8928
Fax: +34-93-733-6803 Email:
Website: www.asiatextileinspections.com
