Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed...
Transcript of Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed...
![Page 1: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/1.jpg)
Marco Ricco
Quality Management
![Page 2: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/2.jpg)
2
Process
Quality Management
Gear production
Tensioner production
Plastic component production
Lyra Bearing
Lyra Bearing Quality Management
![Page 3: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/3.jpg)
3
Chain production
Pin production
Certification
Chrome-plating in rotary
barrel*
Every 2 hours on 8-10 pcs
of production:
- Dimensional checks
Every 100 Kg product / 5 pieces
checked:
- Dimensions
- HV Hardness
- Roughness
Chain assembly
External and internal link
productionEvery 2 hours on 8-10 pcs
of production:
- Dimensional checks
Every 100 Kg product / 5 pieces
checked:
- Dimensions
- HV Hardness
- Roughness
*Rotary barrel: This chrome-plating process allows an even
distribution of Cr on all pins.
Lyra Bearing Quality Management
![Page 4: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/4.jpg)
4
Chain production
Certification
Chain assembly
Measuring equipment:
Every 2 hours on 8-10 pcs of production:
- Check of resistance to pressure on
pin rivets
Dynamic test (200 hours) or based on
Customer requirements:
- Chain elongation
200 hours or
Based on
Customer
requirements
Oil 15W40
Oil is filtered, not
changed
Report showing
elongation % every
20 hours.
Lyra Bearing Quality Management
![Page 5: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/5.jpg)
5
Chain productionCertification
Gear production
Every 2 hours on 8-10 pcs of production:
- Dimensions
- HV Teeth Hardness
Teeth with induction
hardening
Lyra Bearing Quality Management
![Page 6: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/6.jpg)
6
Tensioner production
Certification
Tensioner production
Every 2 hours on 8-10 pcs of production:
- Dimensions
- HV Teeth Hardness
- Roughness
Pin
20% of every supply:
- Torsion test
Spring
Every 2 hours on 8-10 pcs of production:
- Dimensions
- HV Teeth Hardness
Tensioner body
Check based on Customer requirements:
- Check of pressure loss, if any
Lyra Bearing Quality Management
![Page 7: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/7.jpg)
7
Plastic component production
Certification
Plastic component
production
Every 2 hours on 8-10 pcs of production:
- Dimensions
100 % of production:
- Surface finish
Lyra Bearing Quality Management
![Page 8: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/8.jpg)
8
Checks Performed at Our Premises
Certification
Checks on incoming
goods
Based on AQL II Standard:
- Dimensions
100 % of production:
- Checks on kit composition
after assembly
Lyra Bearing Quality Management
![Page 9: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/9.jpg)
9
Tests Performed by Third-party
Certified Laboratories
References
Tests performed once a
year
Tensile test *
Microhardness test (all components of the chain)
Micrographic examinations
Dimensional controls
EDS Microanlysis
Chemical analysis Test method: ASTM E1019-11, POI88, MTI8
Average obtained from three measurements
UNI EN ISO 17639:2013
UNI EN ISO 18265:2008
Tests performed on
every supply
Microhardness test (pin of chain) In section 0,02 mm from the surface
Lyra Bearing Quality Management
![Page 10: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/10.jpg)
10
Chain PPAP – Document lists Lyra Bearing Quality Management
![Page 11: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/11.jpg)
11
Quality management
Raw Materials Supplier Manufacturing Distribution Customer
Lyra Bearing is ready to introduce/adapt any control procedure according to Customer’s needs.
Lyra Bearing Quality Management
![Page 12: Presentazione standard di PowerPoint...UNI EN ISO 17639:2013 UNI EN ISO 18265:2008 Tests performed on every supply Microhardness test (pin of chain) In section 0,02 mm from the surface](https://reader035.fdocuments.us/reader035/viewer/2022062609/6100cd231efddf25d8257ea9/html5/thumbnails/12.jpg)
Lyra Bearing srl
Sede legale: Via Vasari, 16 Cadoneghe (PD)
Sede operativa: Via Inghilterra, 4 Vigonza (PD)
Grazie
Tel. +39 0498952907 / +39 049 8934736
email: [email protected]
www.lyrabearing.com
Thank you