Presentation title | Month 00, 201X 1
Transcript of Presentation title | Month 00, 201X 1
Presentation title | Month 00, 201X 1
RE 500 V3 & RE 100 NEWINJECTION MORTAR
Amal Benalil
June 2018
HILTI INNOVATION CONTINUE WITH NEW RE 500 V3
3
Building on the trust and popularity of its predecessor, RE 500 V3 sets new standards for epoxy mortars in
the construction industry for both post-installed rebar connections & anchor installations
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
NEW EPOXY MORTARS RE 500 V3 & RE 100 ADDRESS DIFFERENT NEEDS OF SPECIFIERS AND CONTRACTORS
4
RE 500 V3 Ultimate-performance epoxy mortar for rebar
connections and heavy anchoring
RE 100 Standard epoxy mortar for anchoring and rebar
connections in concrete
Highest bond strength15-30% higher than Fischer
Best in class approvalsApproval for ‘seismic rebar’ from
CSTB, C1 & C2 seismic
approval for anchors
Professional Services PROFIS software, engineering
consultancySystem solution
Mortar, dispenser, tools
Faster curing time4.5H@35C & 5H@35C
Highest productivitySmaller drilling holes Strong approvals
Cracked & un-cracked concrete,
variant setting
Professional Services Installation training
System solutionMortar, dispenser, tools
Competitive
pricing
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
5
RE 500 V3
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
RE 500 V3 KEY VALUE PROPOSITION AND CUSTOMER BENEFITS
6
Highest bond
strengthStrongest approval Fastest curing time
RE 500 V3 offers
optimyzed & cost
effective solution
• Shorter embedment
depth
• Less drilling
• Less motar
consumption
RE 500 V3 reduces
project risks
• ETA & ICC approval
• Approved for cracked
concrete, fire, shock,
fatigue & seismic
• Safeset approved
RE 500V3 provides solution for nearby all civil engineering application
RE 500 V3 enable
projects to move
faster
• Cures in 4.5 hours at
300C
Professional
service
RE 500 V3
professional
services
• Design support
• Profis sofware
• On-site support &
training
1 2 3 3
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HIGHEST BOND STRENGTH FOR RE 500 V3
7
0
1
2
3
4
5
6
7
8
9
10
11
9,3
+8%0%
6,7
8,0
+20%
Ø 30
6,26,7
+30% +30%+20%
8,7
Ø 32
6,2
Ø 28
8,78,0
9,3
8,0
6,2
7,2
Ø 25
7,1
6,3
10,7
8,0
9,3
Ø 10Ø 8
9,3
7,1
10,7
8,0 8,0 8,0
Ø 16 Ø 20
7,2
6,2
8,7
6,7
8,08,7
9,3
Ø 14
8,08,7
8,0
9,3
6,7 6,7
9,3
Ø 12
10,0
7,1
t rd
[MP
a]
0%
Design bond comparison (uncracked concrete) rebar (TR029) ETA world (temp I)
RE500 V3 RE 500 SDFIS-EMHY200R
• 14 & 16 : same bond strength against FIS-EM
• 20 & bigger : higher bond strength against FIS-EM
1
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
STRONGEST APPROVAL FOR RE 500 V3 VS. EM 390S
8Bond strength of rebar ,anchor M16, ETA approval
2
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
Technical comparison RE 500V3 FIS EM 390S Argument for RE 500 V3
Ap
pro
val
Un cracked and cracked (anchor) Both Both
Seismic for Anchor C1, C2 C1, C2 Highest C1 C2 performance with HIT-V and AM rods
Seismic for Rebar Yes - Approved by CSTB for TR023 seismic rebar
Fire resistance Yes Yes Tested in fire for rebar application and approved with ETA
Shock approval (BZS) Yes - RE 500 V3 approved for shock loading
Fatigue approval for rebar Yes - RE 500 V3 approved for fatigue connections
Approval for electric insulation Yes Not Known RE 500 V3 is tested for electrical insulation as barrier for stray current
100 years qualification for rebar ( CSTB) Yes Not Known The highest qualification for working life of chemical anchor
Approval for water tightness (under
pressure) by BAUTECHNISCHE
VERSUCHSANSTALT
Yes Not Known With RE 500 V3 no water penetration when tested at 500 kPa
Ap
plicati
on
ran
ge
Diameter range (rebar) 8 - 40 mm 8 - 40 mmCovers all application range, additional Hilti technical data with V3 beyond M30
Diameter range (anchor) M8 – M39 (M80) M8 – M30
Max. Rebar embedment 3200 mm 2000 mm Max. embedment depth for rebar in ETA
Moment design with Profis Yes No HRM offers moment connections with strut and tie model
DD holes with roughening tool Yes - Same performance as hammer drilled holes with roughening tool
Perf
orm
an
ce
Design bond strength un cracked
concrete (M16 anchor rod)10.7 N/mm2 9.3 N/mm2 RE500 V3 >15% higher bond strength vs. FIS-EM in UC
Design bond strength cracked concrete
(M16 anchor rod)5.3 N/mm2 4.0 N/mm2 RE500 V3 >30% higher bond strength vs. FIS-EM in CC
Design bond strength un cracked
concrete (D20 rebar- ETAG 001)10.0 N/mm2 7.2 N/mm2
RE500 V3 >30% higher bond strength vs. FIS-EM in UC
Design bond strength cracked concrete
(D20 rebar ETAG 001)5.3 N/mm2 4.0 N/mm2
RE500 V3 >30% higher bond strength vs. FIS-EM in CC
Insta
llati
o
n
Working Time at 30~39°C 12 min 7 min Longer working time
Curing time at 30~39°C 4.5 h 5h Faster curing time
Chemical savings with cordless
dispenser Yes No HDE 500 A22 saves 10%-15% on chemical consumption
FASTEST CURING TIME & LONGEST WORKING TIME. SAFE & PRODUCTIVE INSTALLATION WITH HILTI FULL SOLUTION
9
8,0
4,55,0
RE 500 SD FIS EM 390s RE 500 V3
Working time / minute @ 35C
Fastest curing time in the market
RE 500 V3FIS EM 390s
12,0
15,0
RE 500 SD
7,0
Longest working time
Safe solution
Design Software On-site services
Safe & productive installation
Right volume in borehole
10% less volume
Fastest installation
No cleaning & no performance drop
Fastest and easier drilling
3
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
Curing time / hour @ 35C
10
RE 100
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
RE 100 KEY VALUE PROPOSITION AND CUSTOMER BENEFITS
11
Reliable solution Competitive pricing
RE 100 is an
everyday solution
on-sites
• Loading data for rebar
applications
• All drilling conditions
• Dry, wet, cracked and un-
cracked concrete
RE 100 is price
aggressive vs.
Competitors
• Smaller drilling diameters
vs. G5
• Less wastage and
productive : soft foils,
condense liquid and best
dispenser platform
RE 100 provides competitive positioning to win against every competitor
Professional
service
RE 100
professional
services
• Aproval & technical data
• On-site support & training
ETA approval
RE 100 offers
better performance
than competitors
• RE 100 is ETA approved,
more relevant for EC
market
• For rebar as anchors,
RE100 has higher bond
strength vs. G5 (6.7
N/mm2 with ETA vs. 5.2
N/mm2 with ICC) No Profis design
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
RE 100 OFFERS BETTER RELIABILITY, APPROVALS & PRODUCTIVITY
12RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
Technical comparisonRE 100 Epcon G5
Argument
Type of cartridge Soft foil Hard cartridge Waste volume is reduced compared to conventional hard cartridges
Ap
pro
va
l
Approvals : ETA & ICC ETA ICC ICC In Vietnam, all submissions require ETA approval
G5 has ICC approval and doesn’t have ETA approval
Approval for cracked concrete Yes Yes*Since No ETA approval unlike RE 100, however cracked concrete is
covered in the ICC approval
Fire Resistance Yes Yes Additional fire resistance report for post installed rebar from MFPA
Types of reinforcement bar Fractional & Metric Fractional ICC report for RE100 covers both fractional and metric rebar sizes
unlike G5 ICC approval covers fractional
Special report
LEED certificate
VOC content
NSF drinking water
Not known RE 100 has special reports for extended applications
Ap
plic
ati
on
& In
sta
lla
tio
n
Diameter range (rebar) 8 - 40 mm 10 - 32 mmCovers all application range as per ETA approval
Diameter range (anchor) M8 – M30 M10 – M30
Smaller drilling holes for anchor/rebar T10 (12mm drill dia.)
T12 (14mm drill dia.)
T20 (24mm drill dia.)
T10 (13mm drill dia.)
T12 (15mm drill dia.)
T20 (25mm drill dia.)
Saving mortar, drilling cost & labor cost (from G5 data sheet)
Drilling method More flexibility
Cleaning ( CAC: compressive air; MC:
manual cleaning)
CAC: 2 x 2 x 2
MC: 4 x 4 x 4
CAC: 4 x 4x(4 x 4)
MC: no approval
Extra 4 times process of cleaning for competition is time consuming
Competition is not approved for manual cleaning
Chemical savings with cordless dispenser Yes No >10%-15% saving on chemical consumption with HDE 500
Working Time at 30~39°C 12 min 9 min Higher working time
Curing time at 30~39°C 8 h 24 h Faster curing time
RE 100 SMALLER DRILL HOLES SAVE ON INSTALLATION TIME AND COST
13
Rebar
diameter
Min Embed.
depthDrill hole diameter
Chemical saving
from smaller hole Ø
RE 100 Epcon G5 RE 500 V3 EM 390s RE 100 vs. G5
8 mm 80 mm 10 mm 12 mm 10 mm 10 mm 122%
10 mm 100 mm 12 mm 13 mm 12 mm 12 mm 118%
12 mm 120 mm 14 mm 15 mm 14 mm 14 mm 115%
16 mm 160 mm 20 mm 20 mm 20 mm 20 mm 0%
20 mm 200 mm 24 mm 25 mm 25 mm 25 mm 28%
25 mm 250 mm 30 mm 30 mm 30 mm 30 mm 0%
28 mm 280 mm 35 mm 35 mm 35 mm 35 mm 0%
30 mm 300 mm 37 mm 40 mm 37 mm 37 mm 49%
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
We can easily overtake Ramset (G5) where drill holes are shown in submittal documents
REFERENCE, G5 SUBMITTAL SHOWS BIGGER DRILL HOLES DIAMETERS
14RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
On top no approval for manual cleaning and 2 times cleaning by compressive air
15
NOT ANCHORS ONLY HDE
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HDE 500-A22 - PRODUCT FEATURES
16
Speed regulation for precise
bore hole filling
Automatic release mechanism
(no dripping, accurate filling)
• Dosing knob for accurate mortar
injection ( 1=5.4-5.6 ml)
• Black numbering is impossible to
scratch out
High battery capacity 60 foil
packs/full battery*
* With Battery 22 volts 2.6 Ah
Compatibility: 330 & 500 ml
(RE or HY chemical anchor)
Life time =950 foils
Insensitive to dust, concrete or mortar
coating on pushing road
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
DOSING KNOB
• Each number displayed on the knob corresponds approximately to a factor of 6 ml.
17RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HDE LIFETIME & BATTERY CAPACITY
18
Lifetime of HDE
Hard job site condition
Lots of dust and moisture,
high dispensing force
Normal job site condition
Less of dust and moisture
normal dispensing force
950 foil packs 950 foil packs
Battery pack type Battery capacity in number of foil packBattery capacity in number of holes
(12x110)
22 volts 5.2 Ah 130 foil packs 3200 holes
22 volts 2.6 Ah 60 foil packs 1500 holes
HDE 500-A22 is insensitive to dust, concrete or mortar coating on pushing rods !
Influence of foil pack temperature on performance :
-5°C : -50% less quantity due to higher force needed to dispenser the mortar
+40°C : +10 to 20% more quantity can be dispensed
Note that the battery temperature doesn’t influence the performance (capacity) of the tool because the HDE has a very low current
consumption
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
ELECTRICAL DISPENSERS LAST LONGER, SAVE INSTALLATION COST, EASY TO HANDLE & DRIVE PRODUCTIVITY
19
HDM 500
Manual Dispenser
HDE 500-A22
Electrical DispenserArgument
Lifetime of
dispenser
• 200 foil packs • 950 foil packs • ~5 times more lifetime with
HDE
Chemical
saving
• Wastage with inaccurate filling • Accurate filling with dosing knob • Minimum 10% chemical saving
Labor • Manual • Productivity with battery operated (22
volts 2.6 Ah / 5.2 Ah)
• High productivity with time
saving
Lifetime
Service
• Manufacturer’s warranty • Covered under 6 months no cost for
battery, RCL and Manufacturer’s
warranty
OUTLAST
OUTPERFORM
OUTSERVICE
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
20
VFM
RE 500 V3 FOR ANCHORING & REBAR APPLICATIONS AND DIFFERENT DESIGN METHODS
RE 100
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
DUE TO HIGHEST BOND STRENGTH OF RE 500 V3, WE CAN DOWNSIZE COMPARED TO FISCHER
21
M20 M16
RE 500 V3 high bond strength can significantly reduce anchoring applications cost
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
RE 500 V3 ENABLE ANCHOR DOWNSIZING, CUSTOMER CAN SAVE 18% ON INSTALLATION COST
22RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
WITH ITS HIGHEST BOND STRENGTH, RE 500 V3 ENABLE A MINIMUM
COST SAVING OF 12% WHEN REBAR ARE DESIGNED AS ANCHORS
23RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
WHEN REBAR ARE DESIGNED AS REBAR, INSTALLATION COST IS THE SAME FOR RE 500 V3 AND FIS EM 90S BUT…
24RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HRM, THE UNIQUE HILTI REBAR DESIGN METHOD, ENABLE
INCREDIBLE SAVING UP TO 50% UNDER SPECIFIC CONDITION
25RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
WITH SMALLER DRILLING HOLES, RE 100 ENABLES 16% INSTALLATION COST SAVING COMPARED TO EPCONG G5
26RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
CUSTOMER SAVES MIN. 10% ON
CHEMICAL USING HDE 500-A22! T16 rebar
Hole dia. 20mm
Hole depth 160mm
HILTI HIT-RE 100
Chemical purchasing price:
KVND 423/pc for 500ml
OUTPERFORM
Customer saves minimum
8.5% by using HDE.
It’s MVND 34 over the
lifetime of a HDE!
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HDM 500 HDE 500-A22
~10% of wastage
Overflow and dripping due to
inconsistency of trigger pull
Usage / hole:
~ 4 trigger pull
~ 20 ml
NO WASTAGE!
Accurate mortar volume
(with Dosing knob function)
No dripping
(with Automatic release mechanism)
Usage / hole:
~ 3 trigger pull
~ 18 ml
(11% saving compared with HDM)
HDM HDE
Life time , pcs 500 ml 220 950
RE 100 price class C, vnd/ foils 422,620 422,620
No of dispenser if dispense 950 pcs (A) 4 1
Cost of dispenser , class C, vnd (B) 1,246,488 11,091,094
Total volume can dispense, ml (C) 475,000 475,000
Volume saving,% 0 10%
Volume saving, ml - 47,500
Chemical saving, vnd 0 40,148,900
Chemical cost, vnd (D = C* price/ml) 401,489,000 401,489,000
Total cost , vnd (A*B + D) 406,474,953.20 372,431,194
Total saving, vnd 34,043,760
CUSTOMER SAVES MIN. 10% ON
CHEMICAL USING HDE 500-A22! T16 rebar
Hole dia. 20mm
Hole depth 160mm
HILTI HIT-RE 500V3
Chemical purchasing price:
KVND 486kvnd/pc for 500ml
OUTPERFORM
Customer saves minimum
10% by using HDE.
It’s MVND 46.2 over the
lifetime of a HDE!
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB - OPK
HDM 500 HDE 500-A22
~10% of wastage
Overflow and dripping due to
inconsistency of trigger pull
Usage / hole:
~ 4 trigger pull
~ 20ml
NO WASTAGE!
Accurate mortar volume
(with Dosing knob function)
No dripping
(with Automatic release mechanism)
Usage / hole:
~ 3 trigger pull
~ 18 ml
(11% saving compared with HDM)
HDM HDE
Life time , pcs 500 ml 220 950
RE 500V3 price class C, vnd/ foils 486,026 486,026
No of dispenser if dispense 950 pcs (A) 4 1
Cost of dispenser , class C, vnd (B) - -
Total volume can dispense, ml (C) 475,000 475,000
Volume saving,% 0 10%
Volume saving, ml - 47,500
Chemical saving, vnd 0 46,172,470
Chemical cost, vnd (D = C* price/ml) 461,724,700 461,724,700
Total cost , vnd (A*B + D) 461,724,700.00 415,552,230
Total saving, vnd 46,172,470
29
EXAMPLES OF SPECIFIED PROJECTS WITH RE 500 V3
ENGINEERING TEAM ALREADY IN ACTION
RE 500 V3 and RE 100 launch | MO Vietnam | April 2018 | AB
BINH HUNG WASTE WATER TREATMENT
Presentation title | Month 00, 201X 30
PPROJECT PICTURE INFORMATION
Application / Products
▪ Application: Valve fixing
▪ Specified Product : RE 500 V3 + HIT- V
Project Information
▪ Name: BinhHung Waste Water Treatment
▪ Location : Binh Chanh, HCMC
▪ Total spec value( USD) : $14.000
▪ Duration: Q4 - 2018
▪ Designer: AVK
▪ Owner: ODA
▪ Consultant : Hitachi
▪ Contractor: TBC
ALPHA 2 PROJECT
Presentation title | Month 00, 201X 31
PPROJECT PICTURE INFORMATION
Application / Products
▪ Application: Structure renovation
▪ Specified Product : Re 500 V3
Project Information
▪ Name: ALPHA 2
▪ Location : Ton Duc Thang Str., D1, HCMC
▪ Total spec value( USD) : $108.000
▪ Duration: Q4 - 2018
▪ Designer: Indochine Engineering
▪ Owner: ALPHA King Holdings
▪ Consultant : TBC
▪ Contractor: CSCEC - Coteccons
COMPARISON TABLE
Presentation title | Month 00, 201X 32
TABLE 1- RE 500 V3 IS THE BEST IN CLASS COMPARE CURRENT RE 500 & RE 500 SD
11
Technical comparison RE 500 RE 500SD RE 500V3 Argument for RE 500 V3
Ap
pro
val
Un cracked and cracked (anchor) Only un cracked Both Both
Seismic for Anchor - C1 C1, C2 Highest C1 C2 performance with HIT-V and AM rods
Seismic for Rebar - - Yes Approved by CSTB for TR023 seismic rebar
Fire resistance Yes Yes Yes Tested in fire for rebar application and approved with ETA
Shock approval (BZS) - - Yes RE 500 V3 approved for shock loading
Fatigue approval for rebar - - Yes RE 500 V3 approved for fatigue connections
Approval for electric insulation Yes Yes Yes RE 500 V3 is tested for electrical insulation as barrier for stray current
100 years qualification for rebar ( CSTB) - - Yes The highest qualification for working life of chemical anchor
Approval for water tightness (under pressure) by
BAUTECHNISCHE VERSUCHSANSTALT Yes Yes Yes With RE 500 V3 no water penetration when tested at 500 kPa
Ap
plicati
on
ran
ge
Diameter range (rebar) 8 - 40 mm 8 - 40 mm 8 - 40 mmCovers all application range, additional Hilti technical data with V3
beyond M30Diameter range (anchor) M8 – M39 M8 – M39 M8 – M39 (M80)
Max. Rebar embedment 3200 mm 3200 mm 3200 mm Max. embedment depth for rebar in ETA
Moment design with Profis Yes Yes Yes HRM offers moment connections with strut and tie model
DD holes with roughening tool - - Yes Same performance as hammer drilled holes with roughening tool
Perf
orm
an
ce
Design bond strength un cracked concrete (M16 anchor
rod)7.1 N/mm2 7.1 N/mm2 10.7 N/mm2 RE500 V3 >15% higher bond strength vs others
Design bond strength cracked concrete (M16 anchor rod) - 3.3 N/mm2 5.3 N/mm2 RE500 V3 >30% higher bond strength vs. others
Design bond strength un cracked concrete (D20 rebar-
ETAG 001)6.7 N/mm2 6.7 N/mm2 10.0 N/mm2 RE500 V3 >30% higher bond strength vs. others
Design bond strength cracked concrete (D20 rebar ETAG
001)- 3.3 N/mm2 5.3 N/mm2
RE500 V3 >30% higher bond strength vs. others
Insta
llati
on Working Time at 30~39°C 12 min 12 min 15 min Longer working time
Curing time at 30~39°C 8h 8h 4.5 h Faster curing time
Chemical savings with cordless dispenser Yes Yes Yes HDE 500 A22 saves 10%-15% on chemical consumption
TABLE 3- RE 100 IS REALIZABLE PRODUCT & HAS EVEN MORE FEATURES THAN RE 500
13
Technical comparison RE 500 RE 100 Argument for RE 100A
pp
rov
al
Un cracked and cracked
(anchor)Only un cracked Both RE 100 can use in both cracked & un-cracked concrete
ETA& ICC approval Yes Yes Reliable product with ETA approval
Fire resistance Yes Yes Tested in fire for rebar application and approved with ETA
Ap
plicati
on
Rn
ge
Diameter range (rebar) 8 - 40 mm 8 - 40 mm
Covers most of application range
Diameter range (anchor) M8 – M39 M8 – M30
Max. Rebar embedment 3200 mm 3200 mm Max. embedment depth for rebar in ETA
Working life, years 50 50 Reliable products in long-term
Insta
llati
on
Working Time at 30~39°C 12 min 12 min Same working time
Curing time at 30~39°C 8h 8h Same curing time
Drilling methodHammer drilling
Diamond coring
Hammer drilling
Diamond coring Same
Chemical savings with
cordless dispenser Yes Yes HDE 500 A22 saves 10%-15% on chemical consumption
TABLE 4- RE 100 HAS SAME MOST OF FEATURES AS EM 390S
14
Technical comparison RE 100 FIS EM 390S Argument for RE 100
Ap
pro
val
Un cracked and cracked
concrete(anchor)Both Both Same
ETA & ICC approval Yes Yes Have both reliable international approval
Fire resistance Yes Yes Same
Ap
plicati
on
Diameter range (rebar) 8 - 40 mm 8 - 40 mm
Covers same application range
Diameter range (anchor) M8 – M30 M8 – M30
Max. Rebar embedment 3200 mm 2000 mm Max. embedment depth RE 100 higher than EM 390S
Insta
llati
on
Working Time at 30~39°C 12 min 7 min Longer working time
Curing time at 30~39°C 8h 5h Longer curing time
Cleaning method
Manual cleaning
Compressive air
cleaningCompressive air cleaning
Fischer EM 390S is not approved for manual cleaning
Chemical savings with cordless
dispenser Yes No HDE 500 A22 saves 10%-15% on chemical consumption
(Except seismic)