Presentation on Production Planning and Control

13
Presentation on PRODUCTION PLANNING AND CONTROL Submitted By Md. Sirajul Islam Dept. of Textile Daffodil International University Submitted To Abrar Ahmed Apu Assistant Professor Dept. of Textile Engineering Daffodil International University

Transcript of Presentation on Production Planning and Control

Page 1: Presentation on Production Planning and Control

Presentationon

PRODUCTION PLANNING AND CONTROL

Submitted By

Md. Sirajul IslamDept. of TextileDaffodil International University

Submitted To

Abrar Ahmed ApuAssistant ProfessorDept. of Textile EngineeringDaffodil International University

Page 2: Presentation on Production Planning and Control

PRODUCTION: That transformation of raw materials to finished goods.

Topic Analysis

Page 3: Presentation on Production Planning and Control

PLANNING: Looks ahead, anticipates possible difficulties and decides in

advance as to how the production, best, be carried out.

Topic Analysis

Page 4: Presentation on Production Planning and Control

CONTROL: Phase makes sure that the programmed production is constantly

maintained.

Topic Analysis

Page 5: Presentation on Production Planning and Control

It helps entrepreneur to work out the quantity of material manpower, machine

and money requires for producing predetermined level of output in given period of time.

Production planning

Page 6: Presentation on Production Planning and Control
Page 7: Presentation on Production Planning and Control
Page 8: Presentation on Production Planning and Control

Production control is the process of planning production in advance of

operations, establishing the extract route of each individual item part or assembly, setting, starting and finishing for each important item.

Production control

Page 9: Presentation on Production Planning and Control
Page 10: Presentation on Production Planning and Control

Who was responsible for original plans?

How did that work? Right set of people? Was project well defined from beginning?

Was there an actual written plan? How was Production plan communicated? How well did that work?

How Was the Production Planned?

Page 11: Presentation on Production Planning and Control

Was the plan a good one?

What was good? What was missing? Was the plan realistic? How did the plan evolve over time?

Was the change good or bad? How did the changes affect the project?

Was the Plan the Right One?

Page 12: Presentation on Production Planning and Control

Production planning and control address a fundamental problem of low

productivity, inventory management and resource utilization.

Key Lessons

Page 13: Presentation on Production Planning and Control

Questions & Comments