Preparing for Exhibition
-
Upload
jade-delaney -
Category
Art & Photos
-
view
61 -
download
2
Transcript of Preparing for Exhibition
Experimenting with Foam Board and Layout
Jade Delaney
Here I was trying out using spray mount for the first time on scrap
pieces of paper to get a feel for it. I also used a craft knife board to
place what I was working with on. I worked outside because of the
fumes.
I took the A3 foam board and sprayed each section of it before carefully placing individual pieces of paper on it.
I carefully used a craft knife on this board with a metal ruler to cut out my pieces of text.
I measured out coloured pieces of paper and cut them out to replicate what my photographs would look like on the wall. I experimented with different layouts by moving
the paper around.
I spaced the replica photographs by doing 4cm and 2cm however I think it would look better if they were equally spaced out.
I then tried out all the texts that I had done on foam board to see which looked better
I found that this text worked best because it was the largest, it meant that it was clear. I also preferred it to a label on the side because this way its more coherent with the rest of the work.