Preisliste Lista de Precios - Home - Röhren- und ... Price List Liste de Prix Lista de Precios B...
Transcript of Preisliste Lista de Precios - Home - Röhren- und ... Price List Liste de Prix Lista de Precios B...
B 2006This price list makes all former lists invalid.Subject to our General Terms of Sale.All prices are quoted ex works Voitsberg excluding legal tax.Construction, design and price are subject to modifications.
Irrigation MachinesRainstar T 1Rainstar T Accessories 2 - 3Rainstar T engine drive and dimensions of machine 4 - 5Duostar 6 - 7Rainstar 65 TX Plus galvanized 8 - 9Rainstar E 11 - E 51 10Rainstar E 11 - E 51 Accessories 11 - 12Rainstar E 11 - E 51 HE hydraulic drive 13Rainstar E 11 - E 51 High flotation tyres and Dimensions of machine 14Booms AS 26, AS 32, AS 50, AS 64 15 - 17Rainstar E 61 18Rainstar E 61 Accessories and Dimensions 19Rainboy 20
Pumps and AccessoriesFAMOS Tractor Gear Pumps and Accessories 21Accessories for Tractor Pumps, Pedestal Pumps, Pump Units 22BAUER Diesel Pump Units and Accessories 23Performance Data for Diesel Pump Units 24
Wide range sprinklers and NozzlesSprinklers and Nozzles 25Wide Range Sprinklers and Accessories 26 - 27
Riser Pipe Couplings and Riser PipesRiser Pipe Couplings S 91 and Riser Pipes 28Sprinkler Supports, Hose irrigation equipment and Water Meter 29Hydrants 30
Pipes, Fittings and CouplingsHK Quick Coupling Pipes 31HK Fittings 32HK Fittings and Hose Connections 33HK Coupling Parts galvanized and black 34
PreislistePrice ListListe de PrixLista de Precios
B 2
006
Engl
ish
Röhren- und Pumpenwerk BAUER GmbHA 8570 Voitsberg, Tel.: + 43 / 3142 - 200-0, Fax: + 43 / 3142 - 23095
Managing Director Otto Roiss , GFHead of Sales - worldwide Heimo Wiesinger, Dir ext. 300 [email protected] of Sales - Austria, Eastern Europe Erich Rauth ext. 325 [email protected] Assistant Karin Wilfling ext. 301 [email protected] team is available for you: Monday to Friday: 8:00 a.m. – 5.00 p.m.Area Sales Manager - Benelux Countries,Germany,Scandinavia,Switzerland André Begg von Albensberg 0049 171 67 70 946 [email protected] Sales Manager - Africa, Asia, Australia, New Zealand Karl-Heinz Reinisch ext. 302 [email protected] Sales Manager - Near and Middle East, Egypt, Libya Herwig Mostegel ext. 306 h.mostegel @bauer-at.comArea Sales Manager Slurry - Belgium, France, French Switzerland, Holland Martin van Engelen 0032 475 63 53 80 [email protected] service - order desk: Fax: 043 3142 200-340 Austria Daniela Pirsterer ext. 327 [email protected], Poland, Serbia, Ukraine, Russia Monika Hallmann ext. 326 [email protected], Romania, Bulgaria, Moldova Claudia Reinprecht ext. 328 [email protected]
Fax: 043 3142 200-320 Germany, Switzerland, Liechtenstein, Luxemburg Waltraud Bäuchler ext. 305 [email protected], Spain, Italy,South-/Central America, Near-/Middle East,Egypt,Libya Elisbeth Langmann ext. 307 [email protected], China, Asia, Australia, New Zealand Bettina Börs ext. 303 [email protected], Scandinavia, Belgium, the Netherlands, USA, Canada Monika Dettenweitz ext. 308 [email protected], Mauritius, Algeria, Tunisia, Morocco, French Switzerland Sabine Helmreich ext. 309 [email protected] sales support :Product Management PIVOT / LINEAR Johann Gallaun ext. 343 [email protected] Management RAINSTAR / PIPES Franz Peter Roll ext. 341 [email protected] Management SLURRY Anton Hois ext. 345 [email protected] Management SLURY TANKERS Karl Binder ext. 447 [email protected] service: Fax: 043 3142 200-350
Johann Benedikt ext. 351 [email protected] spare parts : Fax: 043 3142 200-350
Alfred Kerd ext. 353 [email protected] Bäck ext. 352 [email protected]
Public relation:Heidi Platzer ext. 321 [email protected]
Sales representatives - Austria: Fax: 043 3142 200-340Styria, Carinthia, Tyrol, S&E Salzburg, Vorarlberg Viktor Gross + 43 664 80210 331 [email protected] Salzburg, Upper Austria, Lower Austria Fritz Englmair + 43 664 80210 332 [email protected], Lower Austria, Burgenland Günter Windisch + 43 664 80210 330 [email protected] representatives - worldwide: Fax: 043 3142 200-320Australia, New Zealand Tim Ewens + 61 429 700 786 [email protected]
Robert Hultgren + 1 0800 922 8375 [email protected] A. Coso + 1 0800 922 8375 [email protected]
Brazil Hannes Stabla + 55 41 99 28 02 76 [email protected] - East Thomas Wolfgang Münster + 49 176 13 03 03 03 [email protected] - South/North/West André Begg von Albensberg + 49 171 67 70 946 [email protected] - Agriculture Equipement Rob Heap + 44 7788 4183 18 [email protected] - Industry John Newton + 44 38 53 91 533 [email protected] Marek Kolmus + 48 22 646 4886 [email protected] Anghel Vagai + 40 744 653 689 [email protected] Peter András + 421 903 706 643 [email protected] Imre Bende + 36 56 510 138 [email protected]
BAUER SALES ORGANISATION Tel.: +43 3142 200-0 www.bauer-at.com
North America
Röhren- und Pumpenwerk BAUER GmbHA 8570 Voitsberg, Tel.: + 43 3142 200-0, Fax: + 43 3142 200-320 / -340
Standard extent of supply
- connection HK 76 - T31, T41 HK 108 - T51, T61
Basic unit ModelNozzle range
[mm]PG* Part no.
Price in EUR
T 65-270 14 - 22 2.056 1.400 31 833 0234 9.850,00T 65-300 14 - 22 2.155 1.427 31 833 0178 10.070,00T 65-340 14 - 20 2.288 1.462 31 833 0180 10.540,00T 75-250 14 - 26 2.264 1.453 31 833 0182 10.530,00T 75-270 14 - 26 2.353 1.476 31 833 0184 10.620,00T 75-300 14 - 24 2.485 1.511 31 833 0186 10.710,00T 85-190 16 - 28 2.238 1.480 31 833 0188 10.620,00T 75-330 14 - 24 2.778 1.707 31 833 0190 11.820,00T 75-350 14 - 22 2.866 1.730 31 833 0100 11.940,00T 85-270 14 - 28 2.852 1.711 31 833 0192 12.110,00T 85-300 14 - 28 3.022 1.755 31 833 0194 12.210,00T 85-320 14 - 26 3.136 1.784 31 833 0102 12.270,00T 90-250 16 - 30 2.910 1.739 31 833 0104 11.940,00T 90-270 16 - 30 3.038 1.773 31 833 0106 12.170,00T 90-300 16 - 30 3.229 1.823 31 833 0108 12.340,00T 75-400 14 - 20 3.577 2.309 31 833 0198 12.200,00T 75-420 14 - 20 3.666 2.349 31 833 0200 12.430,00T 85-350 14 - 26 3.796 2.325 31 833 0204 14.340,00T 85-370 14 - 26 3.910 2.378 31 833 0206 14.550,00T 90-330 16 - 30 3.909 2.334 31 833 0212 14.570,00T 90-350 16 - 28 4.037 2.389 31 833 0214 14.880,00T 85-400 14 - 26 4.040 2.443 31 833 0216 16.180,00T 85-450 14 - 24 4.324 2.592 31 833 0218 16.730,00T 90-370 16 - 28 4.124 2.449 31 833 0220 16.260,00T 90-390 16 - 26 4.251 2.512 31 833 0222 16.500,00T 90-420 16 - 26 4.442 2.615 31 833 0224 16.860,00T 90-450 16 - 26 4.633 2.714 31 833 0226 17.150,00
T 100-300 16 - 30 4.126 2.462 31 833 0228 16.310,00T 100-330 16 - 30 4.362 2.531 31 833 0230 16.390,00T 100-350 16 - 30 4.519 2.577 31 833 0232 16.700,00
1) Total weight with cart, sprinkler and 4 balancing weights / weight of the complete unit - PE pipe filled with water and without water (empty weight)
PG... Product group
90 x 370
100 x 330100 x 350
90 x 39090 x 42090 x 450
100 x 300
85 x 40085 x 450
85 x 37090 x 330
T 31
T 51
T 61
75 x 33075 x 35085 x 27085 x 30085 x 320
75 x 25075 x 270
RAINSTAR T- Rainstar with special PE-pipe- 2-wheel undercarriage with adjustable track width and jack - revolving pipe reel with integrated supports - machine supports with mechanical winch additional transmission on T 51, T 64
65 x 27065 x 300
PE –pipeØ [mm] x length [m]
- Rainstar with standard equipment for cart *) without sprinkler
- hot-dip galvanising for pipe drum, undercarriage and turntable - drive with BAUER full-flow turbine TVR 20- irrigation computer ECOSTAR 4000S with back-up battery and solar panel
75 x 30085 x 190
90 x 300
- BAUER 4-speed gearbox with aerated brake and PTO rewind - automatic cart lift for wheel cart
65 x 340
Weight in kg 1)w. water w/o water
*) Important ! Cart supplements according to next page 1/2 are to be provided
90 x 25090 x 270
T 41
75 x 42085 x 350
75 x 400
90 x 350
B 2006 - ex works, without VAT 1
Model PG* Part no.Price
in EUR
T 41 32 834 2750 214,00T 51 – T 61 32 833 7750 214,00
T 41 32 833 9130 254,50T 51 – T 61 32 833 9100 254,50
T 31 – T 41 32 829 1591 169,00T 51 – T 61 32 830 1571 270,50T 31 – T 41 32 831 1375 89,80T 51 – T 61 32 831 1370 98,60
T 31 – T 61 32 833 9000 322,00T 31 – T 61 32 833 9005 525,00
T 31 – T 61 32 833 9080 33,90
T 31 – T 41 32 833 9270 583,00T 51 – T 61 32 833 9260 583,00
T 31 – T 41 32 833 8590 432,50 T 51 – T 61 32 833 8500 432,50
T 51 – T 61 32 833 7620 973,00
T 51 – T 61 32 827 7960 259,50
T 51 – T 61 32 833 8510 953,00
T 51 – T 61 32 833 8550 823,00T 51 – T 61 32 833 8545 800,00
2-valve block*) These options are only possible in combination with the hydraulic supports part no. 833 7620!PG... Productgroup
3-valve block
1.620,00
T 51 – T 61 32 827 8350 950,00
– 4-valve block T 51 – T 61 32 833 8540
T 51 – T 61 833 8555
Part numbers for separate hydraulic options (without option hydraulic supports)
1.440,00
Hydraulic jack - 1-valve blockHydraulic swivel aid - 1-valve block
Hydraul. jack and and hydr. swivel aid 32
832 9290
Hydraulic swivel aid + jack *)
Hydraulic control valve block 2-valve block for separate control of machine supports Hydraulic swivel aid *)
Mechanical swivel aid
Hydraulic supports
Hydraulic jack *)
Tires 185/70-R13 (609 mm Ø-width 199 mm) instead of 165/70-R13 required for boom AS 32
T 31 – T 61
for over and low pressure for ECOSTAR – requires automatic unit shut off
HK 108 / 7 m long
for sprinkler balancing (piece)
Conical filter f. connecting hose HK76Conical filter f. connecting hose HK108
for pulling asymmetric carts
Extension pipe for cart lift
Burdening weights
Cart supplementsPendulum, weight bracket with 2 burdening weights and connector for wheel cart with adjustable track width for symmetric or asymmetric PE-pipe retraction (cart tyres 165 / 70 R 13)
for symmetric and
for symmetric pipe retraction
ACCESSORIES- RAINSTAR TDescription
HK 76 / 7 m long
Unit connection on both sides, HK 76HK 108/108 mm ØUnit connection one side
Connecting hose with 2 x rubber sealing rings
for water meter DN 80, HK 76 for water meter DN 100, HK 108
for asymmetric pipe retraction
567,00833 9010asymmetric pipe retraction T 31 – T 61 32
173,50
Surcharge for bigger cart tiresT 31 – T 61
valve for ECOSTAR – requires automatic unit shut-off
Tool bar extension
66,20
T 31 – T 61 833 7749 34,70
833 9690
219,00
Electric COMBI shut-off valve
for ECOSTAR – requires automatic unit shut-off 510,00
510,00834 2740
833 9250Electric overpressure shut-off valve
T 31 – T 61
Electric low pressure shut-off
Boom pipe for mounting two sprinklers T 31 – T 61 833 9090
T 31 – T 61
32
32
32
32
32
32
2 B 2006 - ex works, without VAT
Model PG* Part no.Price
in EUR
T 31 – T 61 32 834 3710 258,00
T 31 – T 61 32 827 7890 87,50
T 31 – T 61 32 834 2905 165,00
T 31 – T 61 32 827 6190 134,50
T 31 – T 61 42 662 2510 43,10
T 31 – T 61 42 062 2303 196,00
Ø 65 mm 32 831 1775 44,20Ø 75 mm 32 831 1780 44,20Ø 85 mm 32 831 1745 50,60Ø 90 mm 32 831 1755 53,00
Ø 100 mm 32 831 1760 53,00
T 51 – T 61 32 677,00
T 51 – T 61 32 833 9370 851,00
Surcharges per machine for larger tyres – for 2 wheels
for basic tyre dimension swivelling at track tyre dia. tyre width PG* Part no Price
205/R 14 C 1800 - 1980 mm 696 220 32 833 9150 125,50
205/R 14 C 1800 - 1980 mm 696 220 32 833 9155 no surcharge
10,0/75 – 15,3 1800 - 2000 mm 779 277 32 833 9160 108,5031/15,50 x 15/ only at 1850 mm 810 370 32 833 9165 529,00
31/15,50 x 15/ only at 1850 mm 810 370 32 833 9170 482,50
PG... Productgroup
T 51
T 61
instead of tyres 195/70 R 14 Ø 636 mm - 197 mm wide
instead of tyres 195/R 14 C Ø 675 mm - 209 mm wide
instead of tyres 205/R 14 C Ø 696 mm - 220 mm wide
instead of tyres 10,0/75-15,3 Ø 779 mm - 277 mm wide
T 31
T 41
Pipe guiding mechanism lays downPE-pipe precisely between plant rows
Adapter for higher coupling ring
Sliding blocks for PE-pipes
Wedges / pieceabsolutely required in the German RepublicDrive shaft for PTO rewind
Lighting and fastening
Surcharge Portal-type axle clearance 380 mm
Yoke instead of coupling ring (Surcharge)
Height-adjustable trailer coupling with coupling ring (surcharge)
Description
Surcharge ECOSTAR 4200Irrigation computer with real time clock, suitable for input of up to 4 retraction speeds per irrigated strip, totalling of overall irrigation time, input and output for transmitter box SMS 4210
T 31 – T 61 833 2850
Surcharge ECOSTAR 4200 T 31 – T 61 834 3712with transmitter box SMS 4210Pressure switchfor ECOSTAR 4000S and 4200 for pressure start and low pressure shut-off
T 31 – T 61
160,50
1.640,00
265,00834 2900
32
32
32
B 2006 - ex works, without VAT 3
Surcharge for engine drive for RAINSTAR T 31 – T 61
PG*Price
in EUR
8342960 32 2.405,00
8342962 32 3.870,00
PG... Productgroup
Description
Surcharge for combi-drive (engine drive and turbine) for optional operation with engine or turbine for RAINSTAR T 31 - T 61
Drive package with HONDA 3.7 kW fuel engine model GX 160K, mounted on the RAINSTAR, further extent of supply as described above.
In addition:Belt drive from the turbine to the RAINSTAR gearbox. V-belt drive by means of free-wheeling pulleys for optional operation with turbine or engine.
Double unit connection for clear water and slurry operationwith ball and ring HK 76 (T 31 and T 41)with ball and ring HK 108 (T 51 and T 61)
ECOSTAR 4000S suitable for change over from engine drive to turbine drive.
Retraction speeds:T31, T41: 70 – 350 m/hT51, T61: 70 – 310 m/hSpeed range with turbine drive – see performance chart.
Surcharges are valid ex works for factory-mounted drives. Prices for retrofit on existing in-field machines are subject to change.
Drive package with HONDA 3.7 kW gasoline engine model GX 160K, mounted on the RAINSTAR3.6-litre gasoline tank (for approx. 3 hours operating time). Step-down mitre gear 1:2 with centrifugal clutch. Engine with hand-start. V-belt drive from drive motor to the RAINSTAR gearbox.
Connecting bend with ball and ring HK 76 (T 31 and T 41) with ball and ring HK 108 (T 51 and T 61)
Retraction speed control with irrigation computer ECOSTAR 4000S Retraction speeds:T 31, T 41: 70 – 350 m/hT 51, T 61: 70 – 310 m/h
Surcharge for external drive for RAINSTAR T 31 - T 61(without turbine) consisting of:
Surcharge for engine drive (without turbine)
Surcharge for combi-drive with engine and turbine
4 B 2006 - ex works, without VAT
Basic unit Height WidthLength
incl. CartLengthw/o cart
Clear-ance
TyresTrack width
HeightLength
reel - cartLength w/o
coupl. Ring
A B C D E I G HT 31 2445 2267 5270 3570 260 195/70 R14 2185 2750 2965T 41 2840 2267 5270 3570 265 195 R 14 C 2575 2970 3190T 51 3140 2298 5306 4045 275 205 R 14 C 2870 3170 3520T 61 3180 2298 5306 4045 310 10,0/75-15,3 2870 3170 3520
Basic unitT 31T 41T 51T 61
Basic unit
T 31 , T 41
T 51, T 61
symmetric asymmetric
PG... Productgroup
Machine dimensions T (measurements in mm)
Track widthHeight
Tyres
NOTE: on models T 31 - T 61 swivel reel from 1800 mm track width
Drawbar coupling height (measurements in mm)
795
1500
-200
0
Cart dimensions (measurements in mm)
Symmetric cart
229
1200-3000 (3800) 1100
1200-20001100
1200-2000 1100
WH
WH
1200-3000 (3800)1100
165/70 R 13
Asymm. cart
270
Coupling ringtop B498504510545
Coupling ringbottom A
223
235
+ adapter C748754760
B 2006 - ex works, without VAT 5
Overall View of the Machines
Diam. Length sym. asym. Diam. Length sym. asym.
65 - 270 65 270 X (75 - 380) 75 380 X65 - 300 65 300 X 75 - 420 75 420 X65 - 340 65 340 X (85 - 340) 85 340 X
(75 - 240) 75 240 X 85 - 370 85 370 X75 - 270 75 270 X (90 - 320) 90 320 X75 - 300 75 300 X 90 - 350 90 350 X85 - 190 85 190 X (85 - 410) 85 410 X75 - 330 75 330 X (90 - 370) 90 370 X75 - 350 75 350 X 90 - 390 90 390 X
(85 - 280) 85 280 X 90 - 420 90 420 X85 - 320 85 320 X 90 - 450 90 450 X
(90 - 240) 90 240 X 100 - 300 100 300 X90 - 270 90 270 X 100 - 330 100 330 X90 - 300 90 300 X (100 - 360) 100 360 X
PG... Productgroup
DUOSTAR (T31D, T41D, T51D, T61D)
Model ModelType TypePE-pipe Pipe retraction
Extent of Supply- Rainstar with special PE-pipe- revolving pipe reel with integrated supports- machine supports with mechanical winch additional transmission on T 51, T 64- hot-dip galvanising of undercarriage and turntable- drive with BAUER full-flow turbine TVR 20- irrigation computer ECOSTAR 4000S with back-up battery and solar panel- BAUER 4-speed gearbox with aerated brake and PTO rewind- automatic cart lift for wheel cart- Rainstar with basic sprinkler cart without sprinkler- connection HK 76 - T31, T41 HK 108 - T51, T61
These special pipe lengths (types in brackets) must be chosen for the DUOSTAR, if symmetric or asymmetric pipe retraction is requested!
Notice the PE-pipe retraction for each type!
Machine prices according to Price List B 2006 (Rainstar T, page 1)Accessories according to Price List B 2006 (Rainstar T, pages 2-4)
Attention
- 4-wheel undercarriage with adjustable track width 1.500 mm to 2.000 mm- revolving reel from 1.5 m track width- Sliding drawbar on roller base for coupling at both ends; with coupling hole for yoke to lift the machine by tractor hydraulic for transportation
T 31
T 41
T 51
T 61
PE-pipe Pipe retraction
6 B 2006 - ex works, without VAT
Model PG* Part no.Price
in EUR
T 31 D 32 2.335,00
T 41 D 32 2.180,00
T 51 D 32 2.770,00
T 61 D 32 2.400,00
External drive for DUOSTAR
PG... Productgroup
834 2960 2.405,00
834 2962 3.870,00
ACCESSORIES DUOSTARDescription
Surcharge for DUOSTAR UndercarriageUndercarriagewith tyres 4 x 195 R 14 C (Ø 675mm x 209 mm breit)Undercarriagewith tyres 4 x 195 R 14 C (Ø 675mm x 209 mm breit)
T 31 D – T 61 D
T 31 D – T 61 D
Surcharge external drive - without
turbine with HONDA - engine (see page 5) GX 160 K 1 - 3,7 KW at 1.800 rpm, retraction speed 70 - 350 m/h
with HONDA - engine (see page 5)GX 160 K 1 - 3,7 KW bei 1.800 rpm, retraction speed 70 - 350 m/h
Surcharge combi - drive -
32
32
Undercarriage with tyres 4 x 10,0 / 75 - 15,3 / 12 PR (Ø 779mm x 277 mm breit)
Undercarriagewith tyres 4 x 10,0 / 75 - 15,3 / 12 PR(Ø 779mm x 277 mm breit)
B 2006 - ex works, without VAT 7
ModelNozzle range[mm]
PG* Part no.Price
in EUR
14 - 22 1.790 1.270 31 833 0084 8.230,0014 - 22 1.890 1.300 31 833 0086 8.310,0014 - 28 2.050 1.350 31 833 0088 8.410,0014 - 26 1.940 1.330 31 833 0090 8.380,00
with mechanical control (without ECOSTAR)14 - 22 1.790 1.270 31 833 0092 7.630,0014 - 22 1.890 1.300 31 833 0094 7.710,0014 - 28 2.050 1.350 31 833 0096 7.820,0014 - 26 1.940 1.330 31 833 0098 7.790,00
32 827 5500 582,00
32 827 5540 416,50
32 833 6190 211,001) Total weight with cart, sprinkler and 4 balancing weights/weight of the complete unit - PE pipe filled with water and
PG* Part no.Price
in EUR
32 829 1591 169,00
32 831 1375 89,80
32 833 2500 794,00
32 827 5720 201,50
1) for 65 TX gun cart necessary (for nozzle configuration see page 15) PG... Productgroup
32 830 1442 26,90
2 balancing weights32 833 2550 168,00
32 827 5350 211,00
For drawing-out asymmetric cart32 173,50832 9290
2.540,00Cart parts AS 26 complete 1)
for symmetric and asymmetric PE-pipe retraction 32 833 3701
65 - 300 TX Plus 65 x 30075 - 200 TX Plus 75 x 200
65 - 220 TX Plus ²) 65 x 22065 - 250 TX Plus 65 x 250
75 x 200
Hydraulic shut-off valve for overpressure
RAINSTAR 65 TX Plus
PE –PipeØ [mm] x
Length [m] 65 x 220
65 - 250 TX Plus 65 x 250
Standard Extent of Supply – completely galvanised- Rainstar with special PE-pipe- 2-wheel undercarriage with 1500 mm track width and jack- swivel hose reel with integrated machine supports - drum, undercarriage and turntable hot dip galvanised- drive with BAUER full flow turbine TX20- irrigation computer ECOSTAR 4000S with back-up battery and solar panel- BAUER 2-speed gearbox with brake and PTO reeling device - Automatic cart lift for wheel cart- Rainstar without cart/sledge and sprinkler
65 TX
75 - 200 TX Plus
65 - 220 TX Plus ²)
Boom pipe
Tachometer for digital speed indication for mechanical regulation
COMBI wheel cart with adjustable track width for symmetric PE-pipe retraction, sprinkler balancing mechanism with 2 balancing weights and tires 165/70R13
Description
65 - 300 TX Plus
Mechanical winch for machine support
Conical filter for connecting hose HK76
Toolbar extension
Hydraulic shut-off valve for low-pressure
Balancing weight
Modification kit for asymmetric PE-pipe retraction including
for mounting two sprinklers
For sprinkler balancing mechanism – pce
Weight in kg 1)w. water w/o water
65 x 300
ACCESSORIES - RAINSTAR 65 TX Plus
Type
Connecting hose with 2 x rubber sealing ringsHK 76/7m long
without water (empty weight) ²) not suitable for asymmetric wheel cart!
65 TX
8 B 2006 - ex works, without VAT
PG* Part no.Price
in EUR
32 833 2700 509,00
32 833 2720 509,00
32 833 2810 258,00
32 833 2850 160,50
32 827 5600 80,80
32 827 6190 134,50
42 662 2510 43,10
42 062 2303 196,00
Machine Dimensions 65 TX Plus (measurements in mm)
Basic unit
Height WidthLength
with cart
Lengthwithout
cart
Clear-ances
A B C D E65 TX 2320 1900 4700 3000 240
Basicunit
65 TX
Cart dimensions (measurements in mm)Basic unit
Tyredimensions
65 TX 165 / 70 R13
Symmetric wheel cart Asymmetric wheel cart
PG... Productgroup
Description
PTO drive shaft for PTO reeling device
Height adaptor for coupling ring
Lighting complete with brackets
Wedge / pce.absolutely necessary for the German Republic
Electric shut-off valve for overpressure automatic unit switch-off necessaryElectric shut-off valve for low pressureAutomatic unit switch-off necessaryECOSTAR 4200 Irrigation computer with real-time clock and telemetry outputs and inputs (surcharge)Pressure switch for Ecostar 4000S and 4200 for pressure start and low-pressure shut-off
460
Drawbar coupling height (measurements in mm)
Tyres: 185 / 70 R13 Track width: 1500 mm
Eye onbottom
withadapter
710235
Eye ontop
1200 – 29001100
1200 – 18001100
WH
Track widthheight
Wheel cartsymmetric
Wheel cartasymmetric
B 2006 - ex works, without VAT 9
Model Type **A
S 5
0 Nozzle range [mm]
PG* Part no.Price
in EUR
E 90-480 4 16 - 24 5.595 3.548 31 833 0600 19.790,00E 100-350 3 18 - 30 5.290 3.307 31 833 0670 18.500,00E 100-380 3 18 - 30 5.526 3.391 31 833 0604 18.870,00E 100-400 4 18 - 30 5.683 3.515 31 833 0606 19.320,00E 110-300 4 25 - 37,5 5.392 3.350 31 833 0608 18.310,00E 110-330 3 20 - 35 5.677 3.450 31 800 4160 18.740,00E 110-350 - 18 - 30 5.867 3.506 31 833 0610 19.080,00E 100-430 3 18 - 28 6.156 3.878 31 833 0612 21.850,00E 100-450 4 18 - 26 6.313 3.940 31 833 0614 22.220,00E 110-350 4 22,5 - 35 6.105 3.744 31 833 0616 21.320,00E 110-380 3 22,5 - 35 6.390 3.855 31 833 0618 21.790,00E 110-400 3 22,5 - 35 6.580 3.946 31 833 0620 22.150,00E 110-420 4 22,5 - 35 6.770 4.027 31 833 0622 22.570,00E 120-300 4 25 - 37,5 6.115 3.813 31 833 0624 21.270,00E 100-480 3 16 - 26 6.648 4.219 31 833 0626 23.450,00E 100-500 3 16 - 26 6.805 4.275 31 833 0628 23.750,00E 100-520 4 16 - 26 6.962 4.391 31 833 0630 24.110,00E 110-450 3 20 - 32,5 7.154 4.334 31 833 0632 23.980,00E 110-470 3 20 - 32,5 7.345 4.399 31 833 0634 24.260,00E 110-490 4 18 - 30 7.535 4.486 31 833 0636 24.580,00E 125-310 3 25 - 37,5 6.682 4.183 31 833 0638 21.770,00E 125-350 4 25 - 37,5 7.173 4.351 31 833 0640 22.330,00E 100-550 3 16 - 26 7.787 5.093 31 833 0642 24.920,00E 100-590 4 16 - 24 8.101 5.248 31 833 0644 25.390,00E 110-500 3 18 - 30 8.219 5.215 31 833 0646 25.200,00E 110-520 3 18 - 30 8.409 5.284 31 833 0648 25.670,00E 110-550 4 18 - 28 8.694 5.455 31 833 0650 26.200,00E 120-420 4 22,5 - 35 8.217 5.045 31 833 0652 24.810,00E 120-450 3 22,5 - 35 8.557 5.158 31 833 0654 25.190,00E 125-370 3 25 - 37,5 8.008 4.888 31 833 0656 22.680,00E 125-400 4 25 - 37,5 8.376 5.003 31 833 0658 23.360,00E 140-340 - 25 - 37,5 8.855 5.302 31 833 0660 24.440,00E 110-590 4 18 - 28 8.982 5.552 31 833 0662 27.900,00E 110-620 3 18 - 26 9.267 5.698 31 833 0664 28.330,00E 110-650 3 18 - 26 9.552 5.892 31 833 0666 28.900,00E 120-530 4 25 - 35 9.369 5.532 31 833 0668 27.760,00E 120-550 3 25 - 35 9.595 5.705 31 833 0672 28.440,00E 120-570 - 25 - 35 9.822 5.837 31 833 0674 28.830,00
E 120-600 2) - 25 - 37,5 10.160 6.050 31 833 0840 29.940,00E 125-450 3 25 - 37,5 8.897 5.161 31 833 0676 27.000,00E 125-500 4 25 - 37,5 9.511 5.480 31 833 0678 28.000,00E 140-400 3 25 - 37,5 9.533 5.599 31 833 0680 31.000,00
*) If equipped with Boom AS50, a tandem swing axle must be provided for models E51.**) Boom AS50 can be supplied with 3 or 4 wheel cart,depending on which indication given above;- cannot be operated with boom1) Total weight with cart, sprinkler and 4 balancing weights / weight of complete unit - PE pipe filled with water and without water (empty weight)2) A blow-out device for PE-Pipe must be included in the offer for model E51 120-600 (weight > 10.000kg). Bigger Tires 400 / 60 - 15,5 are required
PG... Productgroup
125 x 500
Weight in kg 1)w. water w/o water
E 51*120 x 530120 x 550
120 x 600
110 x 620
120 x 570
110 x 650
110 x 590
125 x 450
100 x 550
RAINSTAR E 11 - E 51
E 21
PE –PipeØ [mm] x
Length [m]90 x 480
100 x 350100 x 380
E 11
110 x 350
Standard Extent of Supply- Rainstar with special PE-pipe- 2-wheel undercarriage with adjustable track width and mechanically adjustable jack- swivel hose reel with integrated hydraulic machine supports- drum, undercarriage and turntable hot dip galvanised- drive with BAUER full flow turbine TVR 60- irrigation computer ECOSTAR 4000 S with back-up battery and solar panel- BAUER 4-speed gearbox with brake and PTO reeling device- hydraulic cart lift (together with machine supports)- Rainstar – without cart and gun
E 41120 x 450
125 x 400140 x 340
125 x 370
110 x 500110 x 520
120 x 420110 x 550
100 x 590
110 x 400110 x 420120 x 300
E 31 110 x 450
125 x 350
100 x 430100 x 450110 x 350110 x 380
140 x 400
100 x 400110 x 300110 x 330
110 x 470
125 x 310110 x 490
100 x 520
100 x 480100 x 500
10 B 2006 - ex works, without VAT
Model PG* Part no.Price
in EURE 11 – E 31 32 834 1110 231,50
E 41 32 834 1120 231,50E 51 32 834 1130 231,50
E 11 – E 31 32 834 1150 298,50E 41 32 834 1160 298,50E 51 32 834 1170 298,50
with 2 x rubber sealing ringsE 11 – E 51 32 831 1370 98,60
E 11 – E 51 32 834 1000 1.250,00
HE 11 – HE 51 1) 32 800 4270 1.250,00
E 11 – E 51 32 834 1060 339,50
E 11 – E 51 32 833 7749 34,70
E 11 – E 51 32 833 9090 219,00
E 11 – E 51 32 827 7960 259,50
32 833 9700 619,00 32 833 9720 619,00
E 11 – E 41 32 833 9730 1.200,00E 51 andall 4WB
32 833 9740 1.200,00
E 11 – E 51 32 827 8350 950,00
E 11 – E 41 32 833 9770 1.895,00
E 51 / all 4WB 32 833 9775 1.895,00
PG... Productgroup
COMBI wheel cart
with adjustable track width for symmetric PE-pipe retraction, sprinkler balancing mechanism with 4 balancing weights and tires 165/70R13
E 11 – E 51 270,50830 1571
Description
Connecting hose HK 108/7m long
Unit connection both sides
Unit connection on one side for water meter DN100
ACCESSORIES - RAINSTAR E 11 - E 51
Hydraulic control *)of machine supports (2-fold valve block)
Boom pipe for two sprinklers
Balancing weight for sprinkler balancing mechanism - pce
overpressure - (surcharge)
pressure - (surcharge)
no surcharge834 1100
Conical filter f. connecting hose HK108
Modification kit f. asymmetric PE-pipe retraction with cart lift width extension
834 1210
631,00834 1230E 11 – E 51
536,00
over and low pressure
834 1200 536,00
E 11 – E 51Connection if no shut-off valve or combi valve exists
Electric shut-off valve for
Electric shut-off valve for low
Electric combi shut-off valve for
E 11 – E 51
E 11 – E 51
E 11 – E41E 51
1) no blow out device can be used
Hydraulic jack *)3-fold valve block
Hydraulic swivel aid + jack *) 4-valve block
Hydraulic swivel aid *)3-fold valve block
Mechanical swivel aid
32
32
32
32
32
B 2006 - ex works, without VAT 11
Modell PG* Part no.Price
in EUR
E 11 – E 51 32 834 3710 258,00
E 11 – E 51 32 833 2850 160,50
E 11 – E 51 32 833 2940 1.835,00
E 11 – E 51 32 833 9750 851,00
E 11 – E 51 32 834 5600 1.945,00
E 11 – E 51 32 1.795,00
E 31 32 1.430,00
E 41 – E 51 32 1.785,00E 11 – E 51 32 834 1290 229,50
E 11 – E 51 32 834 2900 265,00
Yoke adjustable (surcharge) C) E 11 – E 51 32 834 2910 374,50
E 11 – E 51 32 834 2905 165,00
E 11 – E 31 4W 32 834 2915 94,10E 41 – E 51 4W 32 834 2920 94,10
E 11 – E 51 32 827 6190 134,50
Ø 100 32 831 1760 53,00Ø 110 32 831 1765 53,00Ø 120 32 831 1790 59,90Ø 125 32 831 1770 59,90
1) only in connection with *) marked optionsPG... Productgroup
Sliding block for PE-pipe
062 2303 196,00
834 3712 1.640,00
663 1210 57,10
E 11 – E 51
E 11 – E 51
Lighting complete with brackets
for PTO reeling devicePTO drive shaft
Wedge / pce. Absolutely necessary for Germany
Height adjustable trailer coupling with coupling ring (surcharge) B)
Yoke instead of coupling ring (surcharge) D)
32
Chassis with double axle rigid 4WB
mechanical pipe guiding mechanism lays down PE-pipe precisely between plant
Tandem swing axle 4W track 1800 mm – 2250 mm, (surcharge)free clearance 450 mm
Crimped drawbar (surcharge) A)
track 2 600 mmtyre : 4 x 11,5/ 80 – 15,3tyre: 4 x 12,5/ 80 – 15,3 (surcharge)
hydraulical pipe guiding mechanism lays down PE-pipe precisely between plant
42
42
Description
Surcharge ECOSTAR 4200Irrigation computer with real time clock, Input of up to 4 irrigation speeds per irrigated strip, totalling of overall irrigation time, input and output for transmitter box SMS 4210
Pressure switch for ECOSTAR 4000S and 4200 for pressure start and low-pressure shut-off
Blow-out device for PE-pipe with compressor
with transmitter box SMS 4210Surcharge ECOSTAR 4200
E 11 – E 51
Yoke (surcharge) E)
12 B 2006 - ex works, without VAT
PG*Price
in EUR
8342950 32 6.470,00
8342952 32 7.840,00
Price in EUR
800 4275 32 827,00Surcharge for 40-litre fuel tank, mounted on power unit (for
PG... Productgroup
PG*
32
for RAINSTAR E 11 – E 51, consisting of:
1.135,00
Description
Surcharge for control of support legs with hydraulicdrive systemconsisting of reversing valves, hydraulic lines, control blockand bypass switch for motor shut-off.
Part no.
800 4441
Surcharge for combi-drive (hydraulic drive system and turbine drive)
40 litre tank - optional
Hydraulic drive package with HONDA 8 kW gasoline enginemodel GXV 340 mounted on RAINSTAR with directly coupled hydraulic pumpGasoline tank 40 litres (for approx. 16 hours operating time). 120 l tank for hydraulic oil – oil to be provided by the customer. Flow control valve, hydraulic lines, oil filter and pressure relief valve Hydraulic motor directly linked to the RAINSTAR gearbox. Connecting bend with ball and ring HK 108.
Computer-controlled speed regulation with ECOSTAR4000S irrigation computer.
Retraction speeds:E 11, E 21: approx. 15 - 330 m/h E 31: approx. 15 – 300 m/hE 41, E 51: approx. 15 – 330 m/h
Hydraulic drive package with HONDA 8 kW gasoline enginemodel GXV 340 mounted on RAINSTAR with directly coupled hydraulic pumpGasoline tank 2,3 litres (for approx. 1 hours operating time). 120 l tank for hydraulic oil – oil to be provided by the customer. Flow control valve, hydraulic lines, oil filter and pressure relief valve
V-belt drive from the turbine to the hydraulic motor on the gearbox by means of free-wheeling pulleys. Double unit connect with ball and ring HK 108 for water or slurry operation. Ecostar 4000 suitable for change-over between hydraulic and turbine drive.
Retraction speeds:E 11, E 21: approx.. 15 - 330 m/h E 31: approx. 15 – 300 m/hE 41, E 51: approx.15 – 330 m/hSpeed range with turbine drive – see performance chart
Surcharge for external drive for RAINSTAR E 11 – E 51
HE drive
Description
Surcharge for HE hydraulic drive system for E 11 - E 51(without turbine) consisting of:
Surcharge for combi-drive for optional drive with HE-hydraulic drive or turbine, Surcharge for hydraulic drive system (without turbine) for basic units E 11 – E 51
B 2006 - ex works, without VAT 13
ModelTyres Ø
mmTyre width
mmPG* Part no.
Price in EUR
850 391 32 833 9780 273,50875 405 32 833 9781 619,00
875 405 32 833 9782 363,50
868 305 32 800 3637 255,00850 391 32 833 9783 895,00875 405 32 833 9784 1.590,00
875 405 32 833 9788 1.170,00instead of tyres 12,5 / 80 - 15,3 - 915 mm Ø x 322 mm
875 405 32 833 9786 708,00
Basic unit Height WidthLength
with cartLengthw/o cart
Clearance
A B C D EE 11 3480 2530 7600 5450 340E 21 3480 2560 7730 5580 340E 31 3530 2560 7730 5580 340E 41 3730 2670 8120 6160 340E 51 4070 2670 8200 6230 360
E 51 4W 4280 2670 8200 6230 470
Basic modelEye bottommounted A
Eye top mounted B
E 11 340 620E 21 380 660E 31 380 660E 41 400 680E 51 430 710
E 51 4W 570 850
Track widthheight
Wheel cartsymmetr.
Wheel cartasymmetr.
W 1500 - 3000 1500 - 2000H 1600 1600
Height of gun connecting flange: 1900 mm
PG... Productgroup
Surcharge for set of high flotation tyres per Rainstar
10 ply14 ply
14 ply
14 ply
10 ply15,0 / 55 - 17400 / 60 - 15,5
400 / 60 - 15,5
Description
1800 - 22501800 - 2250
Tyres
11,5/80-15,311,5/80-15,312,5/80-15,312,5/80-15,312,5/80-15,310,0/75-15,3
PLEASE NOTE: smallest track width with high flotation tyres on E11 to E51, E11/4W - E51/4W: 1.900 mm
instead of tyres 11,5 / 80 - 15,3 - 868 mm Ø x 305 mm
instead of tyres 12,5 / 80 - 15,3 - 915 mm Ø x 322 mm
instead of tyres 10,0 / 75 - 15,3 - 779 mm Ø x 277 mm
15,0 / 55 - 17
14 ply400 / 60 - 15,5instead of tyres 11,5 / 80 - 15,3 - 868 mm Ø x 305 mmE 31 / 4 WB
E 11 - E 51 4W
830850
790
Machine Dimensions E 11 - E 51 (measurements in mm)
Track width
1800 - 22501800 - 22501800 - 22501800 - 2250
165/70 R13
Cart dimensions (measurements in mm)asymmetric wheel cart
Tyre dimensions
1020
symmetric wheel cart
Machine height with tandem axle:Machine height with 4-wheel cart 4WB:
E 11 - E 21 / 4W: A + 300 mm, E 31 - E 41 / 4W: A + 280 mm, E 51: A + 210 mmE 31 / 4WB: A + 70 mm, E 41 - E 51 / 4WB: A + 90 mm
Drawbar coupling height (measurements in mm)
830
880
with crimped drawbar C
14 ply
E 31, E 41, E 51
E 11, E 21 400 / 60 - 15,5
E 41, E 51 / 4 WB 400 / 60 - 15,5
11,5 / 80 - 15,3 12 ply
14 B 2006 - ex works, without VAT
Model PG* part no. Price
in EURT 31 – T 61 32 833 9050 2.545,00
65 TX 32 833 3701 2.540,00
5 x half circle nozzles 180° and8 x full circle nozzles
Rotator nozzle configuration for 36 m strip widthwith Rotator sray nozzles * consisting of:
5 x half circle nozzles 180° 2 x full circle nozzles and12 x Rotator nozzles R3000 D4-green
Nozzle configuration for 36 m strip widthwith Senninger spray nozzles * consisting of:
3 x half circle nozzles 180°8 x full circle nozzles and2 x circle and part circle sprinklers SV 60
End Nozzle Block for AS 26 compl. with nozzle body Nozzles SØ 4,5 - 5,0 - 5,5 - 6,0 mm and 3 x diffusers( 2 pcs. required per boom)
T 31 – T 61 32 833 9500 5.590,00
5 x half circle nozzles 180° and14 x full circle nozzles
Rotator nozzle configuration for 44 m strip widthwith Rotator sray nozzles * consisting of:
5 x half circle nozzles 180° 2 x full circle nozzles and6 x Rotator nozzles R3000 D4-green
Spray nozzle configuration for 50 m strip width
5 x half circle nozzles 180° 14 x full circle nozzles 2 x end nozzle blocks and17 x pressure reducing valves PSR 20
Rotator nozzle configuration for 50 m strip widthwith Rotator sray nozzles * consisting of:
5 x half circle nozzles 180° 2 x full circle nozzles and12 x Rotator nozzles R3000 D4-green2 x end nozzle blocks and17 x pressure reducing valves PSR 20
End Nozzle Block for AS 32 complete with nozzle body Nozzles SØ 4,5 - 5,0 - 5,5 - 6,0 mm and 3 x diffusers( 2 pcs. required per boom)
T 31 – T 61 32 833 9690 66,20
PG... Productgroup1) for T31 - T61 no cart supplements necessary - for 65 TX gun cart necessary ²) bigger cart tyres necessary3) not possible with portal-type axle
72,50
191,50
124,50
32
32
833 3715
Surcharge for 2 larger tyres on gun cart Tyres 185/70-R13 (609mm Ø - tyre width 199 mm) instead of 165/70-R13 necessary with AS 32 boom
T 31 - T 61 (65TX) 833 3710
T 31 - T 61 (65TX)
32
32
32
32
32 833 3720
Description
Cart parts AS 26 complete 1)
Boom Cart AS 32 1)2)3)Foldable boom cart with 32 m width to mount on wheel cart of T-Rainstar series. Automatic level adjustment: balancing weights hold the pendulous boom construction at a fixed distance from the ground. Boom elements can be folded quickly and easily. Cart complete with supports and safety device for transporting.
Nozzle configuration for 34 m strip widthwith Senninger spray nozzles * consisting of:
for symmetric and asymmetric PE-pipe retraction
Connector for AS 26with HK-coupling for wide-range sprinkler
Nozzle configuration for 40 m strip widthwith Senninger spray nozzles * consisting of:
28,60
T 31 - T 61 (65TX) 833 372632 169,50
T 31 - T 61 (65TX) 32
833 3737
833 3738
833 3736
T 31 - T 61 (65TX)
544 0701
with Senninger spray nozzles * consisting of:
T 31 - T 61 T31D - T61D
T 31 - T 61 T31D - T61D
T 31 - T 61 T31D - T61D
T 31 - T 61 T31D - T61D
T 31 - T 61 T31D - T61D 140,50
32
376,50
723,00
833 3725 169,50
833 3735
961,00
B 2006 - ex works, without VAT 15
Model PG* part no. Price
in EUR
E 11 / E 21 32 834 1320 8.620,00
E 31 – E 51 32 834 1324 8.190,00
E 11 / E 21 32 834 1328 9.340,00
E 31 – E 51 32 834 1332 8.910,00
Nozzle configuration for 58 m strip widthwith Senninger spray nozzles * consisting of:
5 x half circle nozzles 180° and24 x full circle nozzles
Rotator spray nozzle configuration for 62 m strip widthwith Rotator sray nozzles * consisting of:
5 x half circle nozzles 180° 4 x full circle nozzles and10 x Rotator nozzles R3000 D4-green and10 x Rotatordüsen R3000 U4-blau
Spray nozzle configuration for 72 m strip widthwith Senninger spray nozzles * consisting of:
5 x half circle nozzles 180° 24 x full circle nozzles 2 x end nozzle blocks and27 x pressure reducing valves PSR 20
Rotator spray nozzle configuration for 72 m strip widthwith Rotator sray nozzles * consisting of:
5 x half circle nozzles 180° 4 x full circle nozzles and10 x Rotator nozzles R3000 D4-green and10 x Rotatordüsen R3000 U4-blau2 x end nozzle blocks and27 x pressure reducing valves PSR 20
End Nozzle Block for AS 32 complete with nozzle body 1" femaleNozzles SW 19 Ø 4,5 - 5,0 - 5,5 - 6,0 - 6,5 and 7,0 mm and 3 x diffusers ( 2 pcs. required per boom)
PG... Productgroup
831 7150 767,00
32
32
833 3655
584,00
190,50
32
32
32
32
32
If equipped with Boom AS 50, a tandem swing axle must be provided for models E51
833 3670 1.635,00Hydraulic height adjustment
E 11 – E 51for 1,5 - 2,5m free clearance height
Boom AS 50 with 4-wheel cart – adjustable track - for asymmetric PE-pipe retraction
191,50
838,00
833 3641
Description
833 3660
E 11 - E 51
E 11 - E 51
Boom AS50 with 3-wheel cart – adjustable track - for symmetric PE-pipe retraction, foldaway boom with 50 m system width and 1.5 m free clearance
Swivel assembly 360° E 11 – E 51
E 11 - E 51
for boom arms
E 11 - E 51 833 3650
E 11 - E 51
1.235,00833 3640
16 B 2006 - ex works, without VAT
BOOM CART AS 64
Standard extent of supply: boom width: 64 mhydraulic fold-away irrigated strip width: 72 - 86 m 4 wheel carriage with 4-wheel steering, attachable on both sides adjustable track width ball bearing arm balance 360 ° swivelling all steel components hot-dip galvanised Altitude of nozzles approx. 1,60 m
Model PG* part no. Price
in EUR
E 11 – E 51 32 834 1380 34.960,00
E 11 – E 51 32 834 1381 34.960,00
Spray nozzle set for 72 m strip width with Senninger spray nozzles *, consisting of:
6 x half circle nozzles 180° and32 x full circle nozzles
Rotator spray nozzle configuration for 76 m strip width with Rotator spray nozzles * consisting of:
6 x half circle nozzles 180°4 x full circle nozzles20 x Rotator nozzles R3000 D4-green and8x Rotator nozzles R3000 U4-blue
Spray nozzles set for 86 m strip width with Senninger spray nozzles * consisting of:
6 x half circle nozzles 180°32 x full circle nozzles2 x end nozzle blocks and 36 x pressure reducing valves PSR 20
Rotator spray nozzle configuration for 86 m strip width with Rotator spray nozzles * consisting of:
6 x half circle nozzles 180°4 x full circle nozzles and20 x Rotator nozzles R3000 D4-green 8 x Rotator nozzles R3000 U4-blue2 x end nozzle blocks and36 x pressure reducing valves PSR 20
End nozzle block complete with nozzle body Nozzles SW 19 Ø 4,5 - 5,0 - 5,5 - 6,0 - 6,5 and 7,0 mm, 3 x Diffusers ( 2 pcs. required per boom)
PG... Productgroup* Nozzle sizes to be selected from performance charts - nozzle set includes fittings and sealing tape 1 indicates on which side the PE pipe end (right or left side seen from behind)
32
boom cart AS 64 for asymmetrice PE.pipe retraction1
Description
boom cart AS 64 for symmetrice PE.pipe retraction
E 11 - E 51
E 11 - E 51
834 1390 243,00
E 11 - E 51 834 1391 636,00
32
32
833 3641 191,50
E 11 - E 51 834 1392 971,00
E 11 - E 51 834 1393 1.355,00
32
32
B 2006 - ex works, without VAT 17
Model TypeNozzle range[mm]
Trackwidth
PG* Part no.Price
in EUR
E 110-700 18 – 26 12.370 8.435 31 833 0768 43.420,00E 110-750 18 – 26 12.845 8.635 31 833 0770 44.450,00E 120-650 22 – 32,5 12.845 8.575 31 833 0772 44.610,00E 120-690 22 – 32,5 13.615 9.145 31 833 0774 45.840,00E 120-730 22 – 30 14.065 9.430 31 833 0776 46.990,00E 125-550 25 – 35 12.465 8.185 31 833 0778 42.110,00E 125-590 25 – 35 12.960 8.500 31 833 0780 43.900,00E 125-650 25 – 32,5 13.700 8.960 31 833 0782 44.740,00E 125-700 25 – 32,5 14.440 9.700 31 833 0784 46.990,00E 140-430 25 – 37,5 12.430 8.140 31 833 0786 42.040,00E 140-480 25 – 37,5 13.200 8.450 31 833 0788 43.260,00E 110-700 18 – 26 12.370 8.435 31 833 0790 43.680,00E 110-750 16 – 26 12.845 8.635 31 833 0792 44.720,00E 120-650 22 – 32,5 12.845 8.575 31 833 0794 44.900,00E 120-690 22 – 32,5 13.615 9.145 31 833 0796 46.110,00E 120-730 22 – 30 14.065 9.430 31 833 0798 47.260,00E 125-550 25 – 35 12.465 8.185 31 833 0800 42.390,00E 125-590 25 – 35 12.960 8.500 31 833 0802 44.170,00E 125-650 25 – 32,5 13.700 8.960 31 833 0804 45.010,00E 125-700 25 – 32,5 14.440 9.700 31 833 0806 47.230,00E 140-430 25 – 37,5 12.430 8.140 31 833 0808 42.300,00E 140-480 25 – 37,5 13.200 8.450 31 833 0810 43.540,00
Model TypeNozzle range
Trackwidth
PG* Part no.Price
in EURE 110-700 18 – 26 12.370 8.435 31 833 0812 47.080,00E 110-750 18 – 26 12.845 8.635 31 833 0814 48.120,00E 120-650 22 – 32,5 12.845 8.575 31 833 0816 48.270,00E 120-690 22 – 32,5 13.615 9.145 31 833 0818 49.490,00E 120-730 22 – 30 14.065 9.430 31 833 0820 50.640,00E 125-550 25 – 35 12.465 8.185 31 833 0822 45.750,00E 125-590 25 – 35 12.960 8.500 31 833 0824 45.940,00E 125-650 25 – 32,5 13.700 8.960 31 833 0826 47.550,00E 125-700 25 – 32,5 14.440 9.700 31 833 0828 50.640,00E 140-430 25 – 37,5 12.430 8.140 31 833 0830 45.680,00E 140-480 25 – 37,5 13.200 8.450 31 833 0832 46.900,00
PG... Productgroup1 ) Total weight with cart, sprinkler and 4 balancing weights / Weight of the complete unit - PE-pipe filled with water and without water (empty weight)
RAINSTAR E 61
140 x 430125 x 700
120 x 690120 x 650
140 x 480
E 61 H
110 x 700
125 x 550
2580
mm
140 x 480
125 x 590125 x 650125 x 700
Standard Extent of Supply E 61 H – Hydraulic lowering and swivelling- Pipe reel and turntable assembly can be lowered hydraulically and swivelled through 360° for PE-pipe pull-off- 4-wheel undercarriage with tandem swing axle and hydraulic jack- otherwise as described above
110 x 750
120 x 730
125 x 650125 x 590
PE –pipeØ [mm] x
125 x 590
140 x 430
125 x 650125 x 700140 x 430
Standard Extent of Supply E 61 S – Drive-in-field Design- Rainstar with special PE-pipe- Fixed pipe reel for pulling off or laying down the PE-pipe at the rear- 4-wheel undercarriage with fixed running axles and hydraulic jack- drive with BAUER full flow turbine TVR 60- irrigation computer ECOSTAR 4000S with back-up battery and solar panel
E 61 S
120 x 690
125 x 550
140 x 480
110 x 750
120 x 730
110 x 700
2500
mm
und
275
0 m
m120 x 650
Weight in kg 1)w. water w/o water
Weight in kg 1)w. water w/o water
125 x 550
PE –pipeØ [mm] x
Length [m]110 x 700110 x 750120 x 650120 x 690120 x 730
2000
mm
und
225
0 m
m
18 B 2006 - ab Werk, exkl. MWSt.
ACCESSORIES - RAINSTAR E 61Model PG* Part no.
Pricein EUR
E61 S+H 32 831 1370 98,60
E61 S+H 32 834 1000 1.250,00
E61 S+H 32 834 1060 339,50
E61 S+H 32 833 7749 34,70
E61 S+H 32 833 9090 219,00
E61 S+H 32 834 2260 536,00
E61 S+H 32 834 2250 1.250,00
E61 S+H 32 834 3710 258,00
E61 S+H 32 833 2850 160,50
E61 S+H 32 833 2960 1.835,00E 61 S 32 1.035,00
E61 S+H 32 827 6190 134,50
Machine Dimensions E 61 Tyresfor machine:E 61 S: 4 x 12,5 / 80 - 15,3 (Ø 915 mm x 322 mm)E 61 H: 4 x 11,5 / 80 - 15,3 (Ø 868 mm x 305 mm)for cart:165 / 70 R 13 (Ø 578 mm x 170 mm)
H M NE 61 S-2000 4190 7710 2000 / 2250E 61 S-2500 4020 7710 2500 / 2750E 61 H 4155 7710 2580
O Q RE 61 S-2000 2580 755 1150E 61 S-2500 2580 585 980E 61 H 2580 720 1115
PG... Productgroup
E61 S+H
E61 S+H 834 3712 1.640,00
830 1571 270,5032
32
COMBI wheel cart with adjustable track width for symmetric PE-pipe retraction, sprinkler balancing mechanism with 4 balancing weights and tires 165/70 R 13
Boom pipe for two sprinklers
Surcharge ECOSTAR 4200Irrigation computer with real time clock, suitable for input of up to 4 retraction speeds per irrigated strip, totalling of overall irrigation time, input and output for transmitter box SMS 4210
Pressure switch for ECOSTAR 4000S and 4200 for pressure start and low-pressure shut-off
Surcharge ECOSTAR 4200
Electric shut-off valve for low pressure 1)1) automatic unit shut-off necessary
Description
Connecting hose HK108/7m
Conical filter for connecting hose HK108with 2 x rubber sealing rings
Lighting complete with brackets
Balancing weight for sprinkler balancing mechanism – pce
Modification kit for asymmetric PE-pipe retraction with cart lift width extension
Electric shut-off valve for overpressure 1)
Blow-out device for PE-pipe with compressorPipe guiding device for plant rows
with transmitter box SMS 4210
L918091809180
P2580 / 26702820 / 3070
2870
B 2006 - ex works, without VAT 19
RAINBOY
Model Sledge/CartNozzle Range
[mm]PG* Part no.
Price in EUR
50-125 TiS wheel cart 8 – 14 34 829 0051 4.470,00
50-160 TiS wheel cart 8 – 12 34 829 0049 4.855,00
55-110 TiS wheel cart 8 – 16 34 829 0035 4.535,00
ACCESSORIES - RAINBOYPG* Part no.
Pricein EUR
34 829 6791 55,80
34 829 7000 487,50
34 832 8895 211,00
AUTORAIN
Model PG* Part no.Price
in EUR
Model PG* Part no.Preis
in EURAutorain 40 - 120 26 515 0040 64,30Autorain 50 - 74 26 550 0060 127,00
26 061 3267 3,00
PG... Productgroup
Shut-off valve for overpressure
Digital speedometer
- connection with: hose connector 1 1/4" (40 - 120)
- Autorain packed in wooden crate
- winding mechanism for precise reeling of PE-pipe and drum - shut off valve for the water supply at the end of strip
- automatic hook up of the sprinkler cart for easy transportation
female thread 2" (50 - 74)
- sprinkler cart with adjustable track width 1000 - 1800mm and 750mm clearance
Standard Extent of Supply- Rainboy with special PE-pipe- 2-wheel undercarriage with 185/70R13 tires and fixed pipe reel- frame, drum and cart hot dip galvanized- full-flow turbine drive- automatic layering mechanism- final drive shut-off and overwinding guard- automatic loading of cart- wheel cart clearance 75 cm - track width adjustable from 120-180 cm
Description
Connecting hose with 1 x rubber sealing ringHK 50/3 m
50 x 125
50 x 160
55 x 110
PE –PipeØ [mm] x Length [m]
2.555,00
2.555,00
34
34
Standard Extent of Supply- Autorain with PE-Pipe on 2-wheeled trolley on large tires with support and drawbar- fixed Pipe reel for laying down or pull off PE-Pipe- hot dip galvanizing for frame and sprinkler cart- radial turbine with flanged reduction gear and ratchet to large - automatic drive shut off at the end of irrigation strip- speed setting with speed adjustment lever and different
Circle and sector sprinkler SB 82 with nozzles 5, 6, 7, 8, 9, 10mmBauer R 163 with nozzles 10, 12, 14mm and connector 1 1/2" x 1"
40 x 120
50 x 74
40 -120
50 - 74
Threaded Nipple 1 1/2" x 1" necessary for Bauer R 163
834 0003
PE –Pipe [mm] x Length [m]
834 0001
Nozzle Range [mm]
Flow: 3,3 - 7,0 m³/h - Connecting Pressure 3,7 - 6,5 bar
Flow: 7,0 - 16,0 m³/h - Connecting Pressure 3,7 - 7,5 bar10 - 16,0 mm
8,0-9,0-10 mm
Description
20 B 2006 - ex works, without VAT
FAMOS TRACTOR GEAR PUMPS
Pump ModelSuction
connectionDelivery connection Tractor output kW PG* Part no.
Price in EUR
FAMOS III 60 DN 65 DN 50 15 - 30 kW 23 337 0005 963,00FAMOS IV 80 DN 80 DN 65 22 - 45 kW 23 338 0009 1.485,00FAMOS V 100 DN 100 DN 80 25 - 50 kW 23 338 0004 1.485,00
ACCESSORIES - FAMOS TRACTOR GEAR PUMPS
PG* Part no.Price
in EUR
25 315 0001 125,50
25 805 0012 272,00
42 062 2303 196,0042 062 2304 223,00
25 825 1401 428,50
25 062 8094 62,90
25 324 0403 47,80
25 804 0006 124,50
PG... Productgroup
Standard Extent of Supply- volute pump for clean water- pump sealed with rotating mechanical seal- pump connected with flange- built-on gearbox with spiral gearing and PTO shaft 1 3/8" – 6-spline- protecting cap for PTO connection
Safety valve RP 1"for suction lines
Glycerine pressure gauge with cockØ 63 mm with male thread R 3/8"
Diaphragm priming pump including accessories for evacuating the suction line up to dimension HK 133
PTO drive shaft with splined shaft profile 1 3/8", length 710–985mmfor F III 50 and F III 60for F III 80 to F VI 1000
Flow controlfor automatic engine shut-down (requires diesel safety switch)
Description
Mounting frame for attaching the tractor pump to the tractor hydraulics
Pump trolley 2-wheel, with hitch for toolbar
B 2006 - ex works, without VAT 21
Pump Model Pump flange Connection PG* Part no.Price
in EUR
With non-return flap HK 76 25 214 0001 135,50HK 89 25 214 0002 144,00HK 89 25 215 0001 154,50
HK 108 25 215 0002 165,50HK 89 25 216 0005 199,00
HK 108 25 216 0001 212,00HK 133 25 216 0004 242,50HK 133 25 217 0004 413,50HK 159 25 217 0001 467,00
Pump Model Pump flange Connection PG* Part no.Price
in EUR
with G 1" threaded nipple for safety valve HK 761) 12 109 2301 39,00HK 891) 12 104 2801 46,30HK 108 12 105 2901 52,00HK 108 12 105 2801 62,40HK 133 12 110 2901 76,10
HK 1081) 12 105 2301 62,90HK 133 12 110 2801 78,60HK 159 12 107 2901 83,00
Part no. 109 2301 and Part no. 105 2301 is HK 159 12 107 2801 128,50similar to S73 Flanged connector with socket HK 194 12 108 2901 152,501) suction connections without G 1" threaded nipple
Dimension Length PG* Part no.Price
in EUR
with HK coupling HK 76 2 m 25 109 4752 82,30HK 89 2 m 25 104 4752 95,10
HK 108 2 m 25 105 4752 137,50HK 133 2 m 42 110 4751 153,50HK 159 2 m 42 107 4751 203,50HK 194 2 m 42 108 4751 337,00
Dimensionsuitable
up toPG* Part no.
Price in EUR
with foot valve and drain flape HK 76 20 m³/h 25 204 1200 96,80HK 89 40 m³/h 25 204 1300 100,50
HK 108 75 m³/h 25 204 1400 126,00HK 133 120 m³/h 25 204 1600 180,00HK 159 180 m³/h 25 204 1500 225,00HK 194 300 m³/h 25 204 1700 362,00
PG... Productgroup
DN 125
All mentioned flanged fittings include one set of bolts and one sealing.*) Rubber sealing rings must be ordered separately.
ACCESSORIES for Tractor Pumps, Pedestal Pumps and Pumping Units
DN 65
F IV 80 DN 80
F V 100 DN 100
DN 50
DN 65
DN 100
DN 80
Strainer
Delivery connection
Suction connection *)
Spiral Rubber Suction Hose *)
F III 60
F IV 80
F V 100
F III 60
22 B 2006 - ex works, without VAT
Standard Extent of Supply- pump directly flanged to IVECO diesel engine and mounted on a 2-wheel trolley with 2 crank supports and support wheel- integrated frame tank with filling level indicator and mounted oilpan (6 cylinders with wheel case track 1500)- unit with detachable tow-bar, support wheel and roofing
- mounted exhaust primer for evacuating the suction line- with stop valve
8045 E00 4 76 PS MEC-MG 80.4/3 DN 80 DN 100 400 ltr. 24 063 0678 16.180,00
8065 E00 6 105 PS MEC-MG 100/2A DN 100 DN 125 650 ltr. 24 063 0679 19.720,00
8065 SE00 6 T 160 PS MEC-MG 100/2F DN 100 DN 125 650 ltr. 24 063 0689 24.160,00
8065 SRE10 6 T 196 PS MEC-MG 100/2C DN 100 DN 125 650 ltr. 24 063 0690 28.320,00
PG*
24 4.145,00
24 4.360,00
24 4.940,00
24 5.290,00
24 752,00
24
Lifting boom for suction line 24 429,50
Suction and delivery connectionsSuction connection 4-cyl. units 4" - HK 108 S75 socket with pipe thread 12 20,30Suction connection 6-cyl. Units 5" - HK 133 S75 socket with pipe thread 12 33,80
4" - HK 108 S74 ball with pipe thread 12 20,304" - HK 108 S2 lever closure ring 13 14,404" - HK 108 S11 bend 90° 12 42,20
Rubber sealing ring S4 / HK 108 12 1,35Rubber sealing ring S4 / HK 133 12 2,30
PG... Productgroup
- Attention: unit delivered without operating material (lubricating oil, cooling liquid, accumulator acid etc.)
897,00
Tank capa-city
Part no.
8065 E00
Engine output
at 2.200 min-1
Delivery connec-
tion
Sound absorbing hood for engine, made of sheet steel - lined with sound absorbing mat
ACCESSORIES - BAUER DIESEL PUMPING UNITfor Engine
modelDescription
Pricein EUR
8045 E00
BAUER DIESEL PUMPING UNITS
Engine modelCylin-ders
Pump model Part no.
- Control box model "ELCOS" with: starter, engine stop, timer; speed meter/running hour meter, connector plug for flow control, as well as signal and warning light- unit shut-down in case of: engine over-heating, lube oil underpressure, minimum pressure of pump or pump overpressure
PG*Suction connec-
tion
Price in EUR
105 0140
for all models
8065 SE 00
8065 SRE 10
8045 E00
8065 SRE10
8065 SE 00
110 0140
Anti-theft guard fence
105 0501110 0501
Delivery connection 4-cyl. units and 6-cyl. units
105 0801105 0134105 1101
8065 E00
063 0680
B 2006 - ex works, without VAT 23
Q H Q H Q H Q H Q HDN DN m³/h m m³/h m m³/h m m³/h m m³/h m
IVECO 1750 128 127 124 121 118
8045 E00 1450 86 84 82 80 75
IVECO 1750 120 115 110 108 -
8065 E00 1450 85 80 75 70 71
IVECO 2000 130 127 121 113 -
8065 SE00 1900 116 114 107 100 94
IVECO 1750 129 125 119 113 102
8065 SRE10 1450 88 84 77 69 -
Limit of unit output: 35 °C and 500m sea level.
PG... Productgroup
1/min
PERFORMANCE CHART – BAUER DIESEL PUMPING UNITS
140
210
Engine HP * Pump type
90 100125
220
110100
100
120
190160
170
130
140
125
125 100
105
160
196
MEC-MG 100/2A
MEC-MG 100/2F
MEC-MG 100/2B 200
110
110
60 70 80 90
*) Engine output at 2200 min-1
Suction Deliv Q...m³/h -Capacity H...m -Man. head
76 MEC-MG 80.4/3A 100 80 50
24 B 2006 - ex works, without VAT
PG* Part no. Price in EURwith male thread R ¾“, main nozzle Ø 6 mm and plug main nozzle: SW 17 : dia. 4,0 - 7,0 mmsecondary nozzle: SW 14: dia. 2,8 od. 3,2 mm
26 545 0052 11,3026 545 9802 302,00
with male thread R 3/4", with main nozzle Ø 5,15 mmbrass nozzle: dia. 3,96 - 5,55 mm
26 540 0050 30,7026 540 9800 696,00
26 515 0040 64,30
nozzle Ø [mm] PG* Part no.Price in EUR
per piecenozzle Ø [mm] PG* Part no.
Price in EURper piece
2,8 26 545 0502 0,65 3,96 26 540 3310 3,253,2 26 545 0503 0,65 4,36 26 540 3311 3,25
5,15 26 540 3312 3,255,55 26 540 3313 3,25
nozzle Ø [mm] PG* Part no.Price in EUR
per piece3,1 26 508 0402 0,653,5 26 508 0403 0,654,0 26 508 0404 0,654,2 26 508 0412 0,654,5 26 508 0405 0,655,0 26 508 0406 0,655,5 26 508 0408 0,656,0 26 508 0407 0,656,5 26 508 0409 0,657,0 26 508 0411 0,65
Nipple 3/4“ male x 1“ male threadfor sprinkler connection RC 1“ female to 061 3275 3,40riser pipes wtih 3/4" female thread
Socket 1“ female x 3/4“ female thrfor sprinkler connection R 3/4"male thread
to riser pipes R 1“ male thread
PG... Productgroup
26
26 061 3367 1,65
Connectors for Sprinklers to different Riser Pipes
SPRINKLERS
NOZZLES for sprinklers NOZZLES SW 14 secondary nozzles for B 62
NOZZLES SW 17 for B 62/72 and secondary nozzle for B 90
BRASS NOZZLE for part circle sprinkler SV 60
CIRCLE SPRINKLER B 62/B 62 Z
CIRCLE AND PART CIRCLE SPRINKLER SV 60
CIRCLE AND PART CIRCLE SPRINKLER SB 82with female thread RC1", and mounted diffuser, nozzle set consisting of nozzle diameters 5,0 - 6,0 - 7,0 - 8,0 - 9,0 and 10 mm (standard, no selection possible)per unit
single order / per unitbox / 30 pcs.
single order / per unitbox / 25 pcs.
B 2006 - ex works, without VAT 25
Circle and Sector Sprinkler BAUER R 163 PG* Part no. Price in EURwith female threaded connection 1 ½" including diffuser and nozzle Ø 12 mmNozzle range: Ø 8 – 16 mm
26 550 0060 127,00
Wide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 101Sprinkler with standard nozzles: Ø 16, 18 und 22 mmSprinkler connection with flangeTrajectory angle: 24°Nozzle range: Ø 12 – 24 mmWide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 101 – VA:Same extent of supply and technical data as SR 101, however, Trajectory angle: adjustable 10 – 28°
26 550 0070 575,0026 550 0074 729,00
Sprinkler with standard nozzles: Ø 20, 24 und 26 mm Sprinkler connection with flange
Trajectory angle: 24°Nozzle range: Ø 16 – 30 mmWide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 140 – VA:Same extent of supply and technical data as SR 140, however Trajectory angle: adjustable 10– 28°
26 550 0071 701,0026 550 0075 820,00
Wide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 160Sprinkler with standard nozzle: Ø 25, 30 und 32,5 mmSprinkler connection with flangeTrajectory angle: 24°Nozzle range: Ø 20 – 35 mmWide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 160 – VA:Same extent of supply and technical data as SR 160, however Trajectory angle: adjustable 16 – 28°
26 550 0072 820,0026 550 0077 1080,00
Wide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 202Sprinkler with standard nozzle: Ø 25, 30 und 32,5 mmSprinkler connection with flangeTrajectory angle: 24°Nozzle range: Ø 20 – 40 mmWide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 202 – VA:Same extent of supply and technical data as SR202, however, Trajectory angle.: adjustable 16 – 28°
26 550 0073 902,0026 550 0076 1.140,00
PG... Productgroup
WIDE RANGE SPRINKLERS
100 6476 28,50CONNECTOR HK 76/6/4"BAUER R 163
for sprinkler support 76 B 05
BAUER R 163
26
BAUER SR 101 / SR 101-VA
BAUER SR 140 / SR 140-VA
BAUER SR 101BAUER SR 101-VA
Wide Range Slow-Reverse Circle and Sector Sprinkler BAUER SR 140
BAUER SR 202BAUER SR 202-VA
BAUER SR 140BAUER SR 140-VA
BAUER SR 160BAUER SR 160-VA
BAUER SR 160 / SR 160-VA
BAUER SR 202 / SR 202-VA
26 B 2006 - ex works, without VAT
BAUER A 280 Vector Controlwith electronically controlled arc setting and remote controlSprinkler with standard nozzles: Ø 25, 30 und 32,5 mmSprinkler connection with flangeTrajectory angle: 24°Nozzle range: Ø 17,5 – 40 mm
26 550 0090 3880,00
for BAUER SR 160 and SR 202Nozzle Price Nozzle Price Ø [mm] in EUR Ø [mm] in EUR
8 26 550 1301 3,05 20 26 550 2001 11,7010 26 550 1302 3,05 22,5 26 550 2002 11,7012 26 550 1303 3,05 25 26 550 2003 11,7014 26 550 1304 3,05 27,5 26 550 2004 11,7016 26 550 1305 3,05 30 26 550 2005 11,70
32,5 26 550 2006 11,7035 26 550 2007 11,70
37,5 26 550 2008 11,7040 26 550 2009 11,70
12 26 550 0801 11,7014 26 550 0802 11,7016 26 550 2301 11,7018 26 550 2302 11,7020 26 550 2303 11,7022 26 550 2304 11,7024 26 550 2305 11,7026 26 550 2306 11,7028 26 550 2307 11,7030 26 550 2308 11,70
Price in EUR
Diffuser
26 550 0704 6,70
26 550 0702 53,00
26 550 0703 53,00
26 062 6016 18,70
Flange adapterfor BAUER Wide range sprinkler SR 101SR 140, SR 160 and SR 202
PG... Productgroup
26
Pressure gaugefor BAUER wide range sprinkler SR 101 - SR 202
550 1210 30,00
for BAUER R 163
for BAUER SR 101 and SR 140
Part no. Part no.PG* PG*
for sprinkler R 163
for sprinkler SR 101/140
for sprinkler SR 160/202
ACCESSORIES for WIDE RANGE SPRINKLER
Description Part no.PG*
BAUER A 280 Vector Control
BAUER A 280 Vector Control
Wide Range Slow-Reverse Circle and Sector Sprinkler
TAPERED NOZZLE
B 2006 - ex works, without VAT 27
RISER PIPE COUPLINGS AND RISER PIPES galvanizedDimension Pieces / Weight Price
HK box box kg in EUR
with valve and bolts
50 50 20 22 583 5011 14,9076 50 23 22 583 5015 15,8089 50 24 22 583 5013 16,70
for riser pipe coupling S91 50 50 30 22 101 3401 3,6576 50 34,5 22 109 3401 3,9089 50 38 22 104 3401 4,15
dia. 30 mm; sprinkler connection RP 3/4 “ female thread
30 R 03 50 12,5 22 585 0800 7,0030 R 08 50 34 22 585 0805 9,4030 R 14 25 35 22 585 0810 12,90
with valve and R 1“ male thread
S92 50 10 22 574 0701 18,50
Length[m] single nozzle twin nozzle
30 R 03 0,16 22 10 10 / 530 R 08 0,54 22 7 9 / 530 R 14 1,16 22 6 8 / 5 - 7 / 3,1
1) Construction height is the distance between sprinkler nozzle and the ground!
Use riser pipe couplings S 92 for underground pipe systems and threaded quick coupling pipes!
Available in complete boxes or bundles only!
Nipple 3/4“ male x 1“ male threadfor sprinkler connection RC 1“ female to 26 061 3275 3,40riser pipes wtih 3/4" female threadSocket 1“ female x 3/4“ female thrfor sprinkler connection R 3/4"male thread 26 061 3367 1,65to riser pipes R 1“ male thread
PG... Productgroup
of RISER PIPES 30 R
PG*
PG*
TECHNICAL DATA
Type Part no.
RISER PIPE COUPLING S91
TRESTLE for RISER PIPE COUPLING S91
RISER PIPE 30 R
RISER PIPE COUPLING S92
Connectors for Sprinklers to different Riser Pipes
max. nozzle dia. in mmConstr. height 1)[m]
0,30
Type
0,801,40
28 B 2006 - ex works, without VAT
SUPPORT 76 B 05 *) PG* Part no. Price in EUR
Construction height 0.8 m, nozzle dia. max. 22 mm, 22 589 0051 52,70
CONNECTOR *)
For sprinklers SR101 to SR202 and supports HK 76 26 544 0701 28,60
SKID SUPPORT RE 210
Construction height 0,75 m, nozzle Ø max. 5 mm,with skids, sprinkler connection 3/4“ female thread 22 591 0520 37,90and Geka coupling for the hose
HOSE CONNECTING BEND RE 214
with Geka coupling, suitable for S 91 und S 92 22 591 0230 19,50
Threads according to ISO 228.*) ATTENTION: Rubber sealing rings must be ordered separately!
Standard extent of supply:Water meter with flanged connection PN 10/16; housing from grey cast GG25 with epoxy coating,counter in the dry - transmission from the wet part to the counter through a magnetic coupling; 6-digit counter with lock-up metal lid; measuring part detachable and exchangable,Accuracy of measurement: 2% from Qmax to Qg - 5% from Qg to Qmin
DN 100 125 150Qmax 250 350 500
Qn 125 175 250Qg 11 12 15
Qmin 7 8 10L 250 250 300H 260 275 290H 105 120 135
19 24 30
PG*12121212
PG... Productgroup
522525095
801509010
SPRINKLER SUPPORTS galvanized
HOSE IRRIGATION EQUIPMENT
WATER METER for irrigation
Price in EUR
Nominal widthMaximum flow rate m³/hNominal flow rate –m³/hLimiting flow rate-m³/h
with inlet bend and connection HK 76 *)
Minimum flow rate – m³/h
508,00
Construction height –mm
Weight –kg
Flanged water meter DN 150
400,00
062 8943
15
062 8941062 8942
Constructin length –mm
Flanged water meter DN 100 Flanged water meter DN 125
381,00
460,00
Flanged water meter DN 80Part no. 062 8940
Axle height –mm
Description
B 2006 - ex works, without VAT 29
HYDRANTS galvanizedDim. Price Dim. Price HK in EUR HK in EUR
for S 39 galvanized, with valve and plain 76 22 241 2301 83,90 end for welding on a riser pipe89 22 241 2201 85,00 welding end: Ø 127 mm
108 22 241 2101 103,50 22 243 1000 115,50133 22 241 2001 128,00159 22 241 2401 142,00194 22 241 2501 244,00 CONNECTING BEND S 36 / 3“
for S 35 and S 220 with valve spindleand pressure measuring valve
76 22 241 0200 97,10for branch HK 89, 102, 108 89 22 241 0300 101,50
108 22 242 2401 131,00133 22 242 2301 146,00159 22 242 2001 159,50 CONNECTING BEND S 38 / 4“194 22 242 2101 260,50 for S 37 and S 221 with valve spindle
and pressure measuring valve89 22 242 0300 121,50
108 22 242 0200 138,50for S 36 galvanized, with valve riser pipe for 90 cm earth coverFlange: DN 65 / PN10 ³ CONNECTING BEND S 39 / 5“
22 241 4000 102,50 for S 222 / 5“ with valve spindle and pressure measuring valve
133 22 243 0200 195,50
for S 38 and S 38 U galvanized, with PRESSURE GAUGEvalve, riser pipe for 90 cm earth cover for S 36, S 38 and S 39Flange: DN 100 / PN10 ³ range 0 – 10 bar
22 242 4000 130,00 25 522 0200 24,00
for S 36 galvanized, with valve and plain end for welding on a riser pipe
welding end: Ø 76 mm22 241 1000 53,50
for S 38 and S 38 U galvanized, with valve and plain end for welding on a riser pipewelding end: Ø 102 mm
22 242 1000 79,70PG... Productgroup
²) Riser pipe hydrants include one set of bolts and one sealing. Hydrant risers must be wrapped in dense tape before being covered with earth.
1) ATTENTION: rubber sealing rings must be ordered separately!
3) Flange dimensions according to DIN 2501, nominal pressure PN 10.
Part no.Part no.
HYDRANT S 220 / 3“
HYDRANT S 221 / 4“
HYDRANT TEE S 37 / 4“ 1)
RISER PIPE HYDRANT S 220 / 9 2)
RISER PIPE HYDRANT S 221 / 9 ²)
for branch HK 76, 89
PG* PG*
HYDRANT S 222 / 5“HYDRANT TEE S 35 / 3“ 1)
30 B 2006 - ex works, without VAT
Material: cold-rolled high-strength strip steel, electrically welded and hot galvanized.Nominal pressure: 20 bar for dimension HK 50 und HK 89, 12 bar for all other dimensions.Test pressure: 1,5 times the nominal pressureBending angle: 30° for dimensionen HK 50 - HK 108, 20° for dimensions HK 133 - HK 194Length: 6 m in coupled condition
Number ofpipes
inch in bundle50 2 0,65 11 101 0116 29,30 150 11 101 0096 4.180,0076 3 0,70 11 109 0116 43,10 74 11 109 0096 3.030,0089 3 1/2 0,70 11 104 0116 54,70 45 11 104 0096 2.330,00
108 4 1/4 0,85 11 105 0116 76,40 38 11 105 0096 2.765,00133 5 1/4 1,00 11 110 0116 98,70 26 11 110 0096 2.450,00159 6 1/4 1,00 11 107 0116 132,00 17 11 107 0096 2.125,00194 7 5/8 1,10 11 108 0116 188,50 12 11 108 0096 2.140,00
Rubber sealing rings must be ordered separately!When ordering, please state if pipes have to be perforated for riser pipe couplings.
for truck: 8 pipe bundles of size HK 50 - HK 1596 pipe bundles of size HK 194
for trailer: 8 pipe bundles of size HK 50 - HK 1596 pipe bundles of size HK 194
Dim. Dim. Price HK HK in EUR
50/1m 12 101 0111 108/1m 12 105 0111 50,7050/2m 12 101 0112 108/2m 12 105 0112 58,6050/3m 12 101 0113 108/3m 12 105 0113 66,9076/1m 12 109 0111 133/1m 12 110 0111 63,2076/2m 12 109 0112 133/2m 12 110 0112 73,7076/3m 12 109 0113 133/3m 12 110 0113 84,6089/1m 12 104 0111 159/1m 12 107 0111 82,6089/2m 12 104 0112 159/2m 12 107 0112 96,3089/3m 12 104 0113 159/3m 12 107 0113 109,50
194/1m 12 108 0111 125,50194/2m 12 108 0112 145,00194/3m 12 108 0113 167,00
PG... Productgroup
48,30
PG* PG*
32,4037,8035,5041,00
19,6022,6025,6027,60
133159194
in EURPrice
497689
108
Price in EUR one
HK FITTINGS GALVANIZED
Loading capacity of pipe bundles:
ATTENTION:
Price in EUR
one pipe
Wall thick-ness mm
Part no.Part no.
Partno.
Partno.
HK QUICK COUPLING PIPES GALVANIZED
HK light steel quick-coupling pipe with suction and pressure tight lever closure coupling (according to DIN 19 651), without rubber sealing ring.
HK QUICK COUPLING PIPES
Outer diam.-ØType of pipe HK mm
PG*PG*
B 2006 - ex works, without VAT 31
Dim. Price Dim. Price HK in EUR HK in EUR
50 12 101 0201 2,35 50 12 101 1901 34,6076 12 103 0201 3,65 76 12 109 1901 43,4089 12 104 0201 5,20 89 12 104 1901 54,30
108 12 105 0201 7,40 108 12 105 1901 73,30133 12 110 0201 11,60 133 12 110 1901 109,00159 12 107 0201 12,60 159 12 107 1901 137,00194 12 108 0201 28,10
50 12 211 0051 74,9050 12 100 6955 9,00 76 12 211 0052 101,5076 12 100 7052 12,70 89 12 211 0053 132,5089 12 100 7055 15,40 108 12 211 0054 187,50
108 12 100 7057 17,80 133 12 211 0057 400,50133 12 100 7054 24,80 159 12 211 0056 551,00159 12 100 7056 31,40194 12 100 7053 52,30 76-50 12 103 2701 19,20
89-76 12 104 2711 26,20 50 12 101 1101 19,30 108-76 12 105 2711 33,70
76 12 109 1101 24,80 108-89 12 105 2701 34,7089 12 104 1101 32,80 133-108 12 110 2701 46,30
108 12 105 1101 42,20 159-108 12 100 7091 62,00133 12 110 1101 66,40 159-133 12 107 2701 65,60159 12 107 1101 119,50 194-159 12 108 2701 96,00194 12 108 1101 167,00 S82 ENLARGER 1)
50- 76 12 101 1601 20,80 50 12 101 1201 19,30 76-89 12 109 1601 30,20
76 12 109 1201 24,80 89-108 12 104 1601 39,5089 12 104 1201 32,80 108-133 12 105 6701 49,60
108 12 105 1201 42,20 108-159 12 105 1601 63,20133 12 110 1201 66,40 133-159 12 110 1601 63,20159 12 107 1201 119,50 159-194 12 107 1601 115,00194 12 108 1201 167,00 S70 FLANGED CONNECTOR with ball a. Ri
50 12 101 2500 41,9076 12 109 1501 51,10 76 12 109 2500 48,3089 12 104 1501 71,40 89 12 104 2500 64,80
108 12 105 1501 123,00 108 12 105 2500 76,40133 12 110 1501 181,50 133 12 110 2500 103,00159 12 107 1501 212,50 159 12 107 2500 131,00194 12 108 1501 293,00 194 12 108 2500 192,50
S73 FLANGED CONNECTOR with socket 50 12 101 1701 34,60 50 12 101 2301 36,30
76 12 109 1701 43,40 76 12 109 2301 39,0089 12 104 1701 54,30 89 12 104 2301 52,70
108 12 105 1701 73,30 108 12 105 2301 62,90133 12 110 1701 109,00 133 12 110 2301 77,00159 12 107 1701 137,00 159 12 107 2301 94,30194 12 108 1701 226,00 194 12 108 2301 147,00
PG... Productgroup1) Rubber sealing rings must be ordered separately!
HK FITTINGS GALVANIZED
S8 END CAP 1) S27 INLET TEE 1)
Part no. Part no.PG* PG*
S81 REDUCER 1)
S63 BRASS GATE VALVE 1) both sides HK
S21 TEE 1)
S9 END BALL
S11 BEND 90° 1)
S12 BEND 60° 1)
S18 STEP BOW 1)
for pumps, pumping units and tractor gear pumps
32 B 2006 - ex works, without VAT
S77 HOSE CONNECTOR with ball, without Ring12 1212 1212 1212 1212 1212 12
1213 1213 1213 1213
13 1213 1213 12
1212 1212 1212 12
12 1212 1212 12
1212 12
12 1212 1212 1212 1212 12
1) Rubber sealing rings must be ordered separately! 121212
3) Note inside hose diameter !Coupling dimension HK 70 is compatible with HK 76
CONNECTING DIMENSIONS
CONNECTING DIMENSIONS
Dimension HK 50 76 89 108 133 159 194 Dimension HK 50 70 76 893 89 1083 108 133 159 194Nominal width DN 50 65 80 100 125 150 200 Inside hose Ø mm 50 70 75 75 90 100 110 125 150 200Outer flange Ø mm 165 185 200 220 250 285 340 Number of beads 2 2 2 2 2 3 3 3 3 3Pitch circle Ø mm 125 145 160 180 210 240 295 Hose from mm 52 74 80 80 92 104 113 131 149 201Number of bolts 4 4 4 8 8 8 8 inner-Ø to mm 55 79 85 85 97 112 121 139 161 213Bolt hole Ø mm 18 18 18 18 18 23 23 Width mm 22 24 24 24 24 24 24 24 26 26Male thread G inch 2 2,5 3 4 5 6 Design: hot galvanized steel, without rubber sealing ring.All flanged fittings include one set of bolts and one sealing. HK 70 is compatible with HK 76.
PG... Productgroup
HK HOSE CONNECTORS GALV.
S78 HOSE CONNECTOR 1) with socket
HOSE CLAMP
Part no.
33,80
101 0801
105 0801110 0801
769,40
104 05018911,60
101 0501 9,40
29,3045,40
106 0134
105 0501133 110 0501108
108 0134
S75 SOCKET 1) with pipe thread5076 103 0501
159
159
50
194
76
159
89108133
107 0501
194 108 0140
104 0140105 0140
107 0140
101 0140103 0140
S4 RUBBER SEALING RING for water ²)
110 0140
103 0711
104 0711108-100³)
104 0721109 0711
105 0711
7689-75³)
89
105 0721
33,8047,40 108 0711
107 0711110 0711
13,3020,30
HK FITTINGS GALVANIZED
110 1011105 1021105 1011104 1011104 1021109 1011
103 0801104 0801
101 0134
108 1011
101 0711133 110 0134
11,5014,4022,60
20,40
108 105 0134
107 101189 104 0134
159194
76 103 0134
12,3011,50
16,10
47,40
5,40S2 LEVER CLOSURE RING
50
159 107 0801
92-97
40,40
89108133
6,80
8,707,60
7689-75³)
4,806,50
52-55
131-139
133
108133159
5070
Price in EUR
Dim.HK
Part no.PG*Dim.HK
101 1011103 1011
S74 BALL with pipe thread5070
5011,60
PG*
16,1020,40
8,7011,5012,30
4,806,506,807,60
3,103,50
40,40
2,15062 5149
194
74-7980-85 062 5310
062 5089
2) ATTENTION: Rubber sealing rings are only available in bundles of 50 pcs.
Flanges according to DIN 2501, Nominal pressure PN 10, threads according to ISO 228
12,90149-161201-213 062 5067
062 5087062 5086
5,404,35
6,106,707,60
062 5316
062 5082062 5314
Pricein EUR
8,50
89108-100³)
108
13,3020,30
2,302,803,75
Ø [mm]0,700,901,201,35
104-112113-121
B 2006 - ab Werk, exkl. MWST 33
HK COUPLING PARTS galvanized blackDim. Price Dim. Price HK in EUR HK in EUR
Consisting of: 50 13 101 9000 10,10 Consisting of: 50 13 101 9050 7,20 S1, S2, S3, S4 76 13 109 9000 14,10 S1, S2, S3, S4 70 13 103 9050 10,30
89 13 104 9000 21,00 76 13 109 9050 10,30108 13 105 9000 28,15 89 13 104 9050 15,35133 13 110 9000 39,80 108 13 105 9050 18,05159 13 107 9000 54,10 133 13 110 9050 25,70
194 13 108 9000 85,45 159 13 107 9050 33,10194 13 108 9050 60,35
50 13 101 0132 2,0076 13 109 0132 2,35 50 13 101 0182 1,2589 13 104 0132 4,15 70 13 103 0182 1,45
108 13 105 0132 6,00 76 13 109 0182 1,45133 13 110 0132 7,10 89 13 104 0182 2,65159 13 107 0132 10,40 108 13 105 0182 3,30
194 13 108 0132 17,40 133 13 110 0182 3,95159 13 107 0182 5,20
50 13 101 0134 5,40 194 13 108 0182 10,3076 13 103 0134 8,5089 13 104 0134 11,50 50 13 101 0184 3,95
108 13 105 0134 14,40 70/76 13 103 0184 6,40133 13 110 0134 22,60 89 13 104 0184 8,80159 13 106 0134 29,30 108 13 105 0184 10,00
194 13 108 0134 45,40 133 13 110 0184 14,80159 13 106 0184 18,70
50 13 101 0133 2,00 194 13 108 0184 33,7076 13 109 0133 2,3589 13 104 0133 4,15 50 13 101 0183 1,30
108 13 105 0133 6,40 70 13 103 0183 1,55133 13 110 0133 7,80 76 13 109 0183 1,55159 13 107 0133 11,60 89 13 104 0183 2,70
194 13 108 0133 18,90 108 13 105 0183 3,40133 13 110 0183 4,65
50 12 101 0140 0,70 159 13 107 0183 6,4076 12 103 0140 0,90 194 13 108 0183 12,6089 12 104 0140 1,20
108 12 105 0140 1,35 50,70,76 13 101 0180 0,35133 12 110 0140 2,30 89,108 13 104 0180 0,35159 12 107 0140 2,80 133 13 152 0180 0,35
194 12 108 0140 3,75 159 13 107 0180 0,45194 13 105 0181 0,85
50 12 101 0141 1,45 Design: black steel, oiled76 12 103 0141 2,1589 12 104 0141 2,50
108 12 105 0141 3,75133 12 110 0141 6,60159 12 107 0141 7,10
194 12 108 0141 10,70Design: galvanized steelPG... Productgroup1) Rubber sealing ring required! ²) Rubber sealing rings only available in bundles of 50 pcs.!Coupling dimension HK 70 is compatible with HK 76
Part no.Part no.
S2 LEVER CLOSURE RING 1)
S1 BALL
S10 COUPLING completeS10 COUPLING complete
S1 BALL
S2 LEVER CLOSURE RING
PG* PG*
S3 SOCKET without rubber sealing ring 1)
S4 RUBBER SEALING RING for water ²)
S5 RUBBER SEALING RING oil resistant ²)
BACK STOP for S2
S3 SOCKET without rubber sealing ring
34 B 2006 - ex works, without VAT
Labour hours and charges for travelling for installation and service
Description
No. Art.
EUR
Labour hours for every started hour
999 0001
57,00
Charging is based on actual working time. The client has to confirm the working time of the technician on the form „Serviceschein“ (FO 19 – 06). Concerning the charges for travelling we charge the actual travelling costs: flight charges (art. no. 999 0005) or charges for miles when going by car. We charge EUR 1,35 per kilometre (no. art. 999 0002). In this charge also the time of travelling of the technician is included. Board and lodging needs to be provided by the client. We kindly ask you to send in a demand note in written form in case you need a technician for repair work. . This regulation comes into force as from 1st of October 2004 and is valid for all repair work made after this date. This regulation is valid worldwide. The quoted prices are net prices, excl. taxes.
B 2006 - ex works, without VAT 35
1. Validity1.1. These General Terms of Sale shall apply to all deliveries and services of the vendor save as varied by express written agreement in the order
confirmation or other contractual documents.
2. Conclusion of Contract2.1. The sales contract shall be deemed to have been entered into only after receipt of the vendor's written order confirmation. To be valid any
changes to the contract must be made in writing.2.2.
3. Prices3.1. Unless otherwise agreed upon, prices are to be understood ex works or ex stock of the vendor, not including packing.
4. Delivery and Passing of Risk4.1. The delivery date shall be the date stipulated in the order confirmation. If the purchaser has fallen in arrears with payments due for another
contract with the vendor the vendor shall not be obligated to make deliveries for the time of the default.4.2. Should a delay in delivery be caused the vendor shall be granted a reasonable extension of the delivery period. 4.3. The vendor shall also be granted a reasonable additional delivery time in cases of force majeure such as war, revolts, fire, embargo, labour
dispute, and similar circumstances which are beyond his control.4.4. Penalties or any kinds of compensation for late delivery are precluded.4.5. The purchaser shall not be entitled to resort to a remedy before the expiry of the additional time granted to the vendor unless notified by the
vendor that he will not meet his obligations within the extended delivery period.4.6. Unless otherwise stipulated, the goods shall be considered as sold ex works.4.7. Regarding the moment at which the risk passes and the agreed place of delivery, the INCOTERMS shall apply as amended up to the day of the
conclusion of the contract. 4.8. If goods are lost or damaged in transit it shall be incumbent on the purchaser to file a claim with the carrier immediately.
BAUER reserves the right to give a forwarding agent an order for collection 1 week after the confirmed date and to despatch the readymaterial at the consignee's costs and risks, if not organized by the customer within this time.
5. Payment and Retention of Title5.1. Payment shall be made in accordance with the order confirmation or other contractual agreements. Unless otherwise agreed upon the vendor's
invoices shall be payable on receipt without deduction.5.2. In case of default the vendor will recover interest on default at the rate of 8 % over the valid basic interest rate (EU directive 2000/35/EG)
from the time fixed for payment.5.3. All deliveries are made exclusively under reservation of title. Ownership in the delivered goods therefore shall not pass over to the purchaser
until full payment of the purchase price. In case of attachment or other distraint of the delivered goods, the purchaser is under obligation to file the vendor's ownership of the goods and to notify him of it without delay.
5.4. Off-setOff-setting our claims against counter-claims of any kind is prohibited.
5.5. Cancellation
If a part has been delivered or performed, though, the option to pay a cancellation fee is void.5.6.
6. Guarantee6.1. The vendor's guarantee covers only defects of the supplied goods resulting from faulty design, materials or workmanship.6.2. This liability is limited to defects which appear during a period of 24 months commencing from the date of delivery to the ultimate buyer. In any
case, however, the vendor's guarantee shall end not later than 36 months from the date of the shipment of the goods from the vendor's works or warehouse, if this period expires before the 24-month guarantee period. The repair of any defects does not result in a new guarantee or extension of the guarantee period.
6.3. The purchaser can only avail himself of his rights under this clause if he notifies the vendor in writing and without delay of the defect that has become apparen - according to the applicable warranty regulations (warranty card)
6.4. Upon receipt of a rightful claim from the purchaser the vendor, at his sole discretion, will a) either instruct the purchaser to repair the defective goods himself or have the defective good or parts thereof repaired at the vendor's cost, or return them freight free to the vendor for repair, orb) replace the defective good or parts thereof It is expressly agreed that the purchaser, save as provided for in this Clause, shall have no claims on the vendor for compensation in respect of any kind of loss or consequential damage, or for loss of profit.
6.5. The guarantee of the vendor shall apply only on condition that the operating instructions are observed, and precludes defects arising from improper use or maintenance and normal wear and tear.
7. Jurisdiction, Applicable Law, Place of Performance7.1. Venue for any disputes arising out of or in connection with the contract shall be Graz. 7.2. The contract shall be governed by Austrian law with the inclusion of the UN Convention on Contracts for the International Sale of Goods.
Provisions of a contract as well as clauses of these General Terms of Sale differing from said UN-Convention shall be deemed to be agreed variations as defined by Article 6 of this Convention.7.3. Unless stipulated otherwise, Voitsberg shall be the place of performance for purposes of delivery and payment.
Voitsberg, May 2005
GENERAL TERMS OF SALE
Offers made by the vendor are subject to confirmation.
The Buyer has the right to back out of the contract against the payment of a cancellation fee of 20 % of the purchasing price without giving any reasons (§ 909 ABGB)
Return deliveries are only possible after a clear, written agreement from BAUER and against payment of a handling fee amounting to 25 % of the merchandise value. The material has to be in perfect condition.
B 2006 - ex works, without VAT