Prefabricated substations
description
Transcript of Prefabricated substations
-
Medium Voltage equipment Panorama
MV/LV Prefabricated Substations
Indoor
The MV and LV equipment are delivered directly mounted ensuring a safety, and fast solution.They can be installed in existing building, in a substation or outdoor.
DistributionIndustryBuidings
630 KVA
Reconfiguring the MV network and protecting the MV/LV transformer with our MV switchgear ranges. Supplying LV energy with Minera and Trihal ranges.Distributing and protecting the LV network with Opus and Prisma Plus ranges.Managing functions remotely with Easergy Flair 200C, Easergy T200 and Easergy W200.
IEC
Integrated substation
Indoor/outdoor
2000 kVA
BS
Use of equipment conform to IEC standardsDegree of protectionElectromagnetic compatibilityFunctional testsTemperature classNon-flammable materialsMechanical resistance of the enclosureSound levelInsulation levelInternal arcing withstandEarthing circuit testOil retention
GRC (Glass ReinforcedCement) n
Concrete n
Operation
Design
Use
Application
IEC 62271-202 standard
Metal n
Material of the enclosure
Transformer Max power
Electrical equipment
Max Rated voltage
Compliance with standards
Compact substation
Design
DistributionIndustryBuidings
Outdoor
Outdoor operations type of substation allows reduce footprint and speed of installation. Internal equipment arrangement can be fitted to any type of access.
Distribution
Switching kiosk
IEC/HN
Outdoor
MV/LV
IEC/AS
n
Indoor
1250 kVA
MV/LV
IEC/HN
Indoor operations type of substation provides to operators a protection against bad weather and better working conditions.
Indoor
1 x 1000 kVAor 2 x 630 Kva
MV/LVUnderground
IEC
Indoor
3150 kVA
Tailor made
These substations offer modularity of their dimensions to respond to all equipment requirements.
Primary distribution,Large industries, Oil & Gas, Mine & Metal, Solar & Wind
Walk-in substations Specific
n
n
n
n
n
n
n
n
n
n
n
250 kVA
Schneider Electric Industries SAS89, boulevard Franklin RooseveltF-92505 Rueil-Malmaison cedexTel : +33 (0) 1 41 29 85 00www.schneider-electric.com
NRJED111045EN
As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.
This document has been printed on ecological paper
Publishing: Schneider Electric Industries SASDesign: Schneider Electric Industries SASPrinting Altavia 06-2011
ART. 838
525 -
sch
neider Electric
- All rig
hts reserved
Unisarc
630 A
SM6-36SM6-24
630 A 1250 A
Ringmaster
IEC IECIEC IEC
630 A
21 kA
Compact and modular switch gear combining all MV functional units
Indoor and outdoor
IAC
25 kA
Complete system of modular cubicles
Indoor
IAC
Complete system of modular cubicles
Indoor
IAC
20 kA 25 kA20 kA
Complete system of modular cubicles
Indoor
IAC
SF6 CBSF6 LBS
SF6/vacuum CB SF6 CBVacuum CB
HVL
1200 A
ANSI
20 to 61 kA
IAC
Open-air Switch
HVL/cc
1200 A
ANSI
32 kA
IAC
SF6 switch
Air insulated switchgear
Insulating liquid
Ground Mounted Oil-Immersed Distribution Transformer
Self- Extinguishing CastResin DryTransformer
5 MVA5 MVA
Distribution transformer
Mineral oil
Minera TrihalDV-CASRM6
IEC / ANSIIEC
630 A630 A
25 kA 20 kA
Compactand modularswitchgear combining all MV functional units
Indoor
IAC
Wind dedicated modular switch-gear combiningall MV functional units used in wind farms
Indoor
IAC
Solidinsu l a tion
SF6 CBSF6 LBS
Vacuum CB
Gas insulated switchgear
40 kA
630 A & 1250A
Insulating liquid
High Efficiency Oil-Immersed Transformer
5 MVA
Mineral oil
Minera HE
Insulating liquid
Oil-Immersed Transformer for Photovoltaic Applications
1.5 MVA
Mineral oil
Minera PV
Insulating liquid
Transformers for Hazardous Areas
5 MVA
Mineral oil
Minera ATEX
Biodegradable insulating liquid
Ecological Oil-Immersed Transformer
5 MVA
Vegetal oil
Vegeta
Hire fire pointinsulating liquid Compact design
Compact and Fire Resistant Oil-Immersed Transformer
3,3 MVA
Synthetic or natural ester
SiltrimFluokit
630/1250A
IEC
25 kA
Complete system of modular cubicles
Indoor
IAC
20 kA
630 A
SM6 FBX
IEC
630 A
25 kA
Compact and modular switchgear combining all MV functionnal units
Indoor
IAC
Vacuum CBSF6 LBS
630 Aoption busbar 1250A
21 kA
RATED VOLTAGE
MAX. RATED CURRENT
MAX. RATED SHORT CIRCUIT CURRENT
Flusarc
IEC / ANSI
630 A
25 kA
Compact and modular switchgear combining all MV functionnal units
Indoor
IAC
Vacuum CB
CAS36
IEC
630 A
20 kA
Compactswitchgear combining all MV functional unitsused in RMU
Indoor
IAC
SF6 LBS
Discovering our offer at a glance Products and equipmentfor Medium Voltage distribution networks up to 5 MVA
-
Medium Voltage products Panorama
Load break switch
Remote controlled with Easergy T200 P control unit
Manual or automaticload break switch
Pole mounted switchgear
W seriesRL series U seriesN seriesPM6 PM6 52
630 A 630 A800 A 400 A630 A 630 A
Sectionaliser capabilities
6 kA16 kA 12.5 kA16 kA16 kA 12.5 kA/3 s
ANSIANSI ANSIANSIIEC IEC
Load break switch
Recloser Recloser Single Wire Earth Return (SWER)Recloser
Power factor correction
600 kvar
Power factor correction on MV networks or devices
14400 kvar
31.5 kA
Power factor correction and harmonic filtering on MV networks
Fixed or automatic capacitor banks for motor, substation, or global distribution
Indoor or outdoorinstallation
Instrumenttransformer
2500 A2500 A5000 A
50 kA40 kA50 kA
Outdoor Current Transformer and Voltage Transformer
Ring type and medium voltageLow Power Current Transformer (LPCT)
Ring type and medium voltage Current Transformer, Voltage Transformer
Fuse
AFNORIEC/DIN/UTEIEC/UTEDIN/IEC
250 A2.5 A125 A250A
l1 l1 l1 l150 kA63 kA50 kA63 kA
Motor protection fuse range
Fuse for measurement transformer protection up to 24 kV (Tepefuse) and up to36 kV (Fusarc CF)Back-up technology
Fuses for distribution transformer from 3.6 kV to 36 kV
Switch / disconnector
IEC
630/1250 A
25 kA
Indoor load break switch, disconnector and accessories
vacuum/ epoxy
SF6 vacuum/ epoxy
vacuum/ SF6
SF6"all film" with or withoutinternal fuses
vacuum / SF6drydrydrySF6
CP 200 seriesCT, VTLPCTCT, VTMGKTepefuse, Fusarc CFSolefuseFusarc CFLBSkit
Fault passage indicator
EasergyFlair 200C
Remotemonitoring
digital
MV substation remote monitoring unit
Battery 220 Vac backed-up supply
Embedded web server Local and remote configuration
EasergyT200I - T200E
Substation Control unit
digital
Associated with all types of MV switchgear
T200E associated with Ringmaster only; limited to 4 switches.
Ensure remote control and automated managementEmbedded web serverLocal and remote configuration
SCADA
Easergy L500 Propivar
Detection Phase and earth fault
Installation Wall-mounted
Earthing system: direct, impedent, compensated, isolated
MeasurementU,I, P, Q, S, cos6 D.I., 3 D.O.
ProtocolsIEC 870-5-101, DNP3, Modbus
Communication1 Communcation port , Transmission interfaces: PSTN, Radio,GSM,GPRS, Ethernet, RS232, RS485...
Modbus IEDs concentrator
Switch monitoring and control unit
Fault indicator: phase and earth fault
Capacity1-16 switches
Battery autonomy16 h
Motorisation24 - 48 Vdc
ProtocolsModbus/IP,IEC 870-5-101/104,DNP3, DNP3/IP
CommunicationRadio, PSTN, GSM,GPRS
Modbus IEDs concentrator
Remote control system
Capacity500 Easergy type devices
Network and substation viewsAlarm logs, archives
Data configurationProfessional communicationsand database editorData creation via dialogue boxes
ProtocolsModbus, Modbus IP, IEC 101/104
CommunicationPermanent and non perma-nent: telephone/GSM, radio, direct public and dedicated private linePeriodic call management
OptionWebview, Multistation and Horn/Lamp indication options
Flusarc-PLA
630 A
25 kA
IEC
Load break switch
Manualy operated
SF6
TRLF
1250 A
16 kA
IEC
Air disconnector or switch-disconnector
Manualy operated
Air
SBC
630 A
20 kA
IEC
Air break switch
Manualy operated
Air
IEC
630 A
25 kA
Indoor load break switch disconnector and accessories
SF6
ISR
IEC
400 A630 A
25 kA
Indoor load break switch disconnector and accessories
Air
ISARC
IEC/EN
630 A1600 A2500 A
20 kA
L-TRI 5
Indoor load break switch disconnector and accessories
Air
IEC/EN
20 kA
TRI
Indoor disconnector and accessories
Air
AIR Switch / disconnector AIR disconnector
1600 A max
25 kA
VEIVacuum L
Fixed, removable, or withdrawable circuit breakerSide mounted mechanism
Vacuum
Circuit breaker
630 A
25 kA
Fluvac
Fixed circuit breaker, integrating:Vacuum circuit breaker,Disconnectorearthing switch,Reduced width insulated in SF6(SF6 can be replaced by Nitrogen for 12 kV) and accessories
Vacuum CB/SF6
Easergy Flair
digital
Phase and earth fault indicator for underground network
Lithium battery power
Earthing systemdirect, impedant,compensated, isolated
Detection phase and earth fault
Settingon site by dip switch
Installationwall mounted3 phases or / and earth CT
Easergy Flair 2xd
digital
Phase and earth fault indicator for underground network
Self powered by CTs
Measurementammeter,maximeter
Detectionphase and earth fault
Settingon site by dip switch or with keyboard
InstallationDIN formatintegrated into switch-gear
DAX
digital
Phase and earth fault indicator for underground network
Lithium battery power and/or LV power
direct,impedant
Detectionphase and earth fault
Settingon site by HMI through push buttons
Installationwall mounted3 phases or / and earth CT
Fault passage indicatorOverhead network control units
ADVCEasergyT200P
EasergyFlite
ControlControls recloser
ProtectionPhase and earth current, directional, voltage, frequency, harmonics
DetectionPhase and earth faults, directional
MeasurementCurrent, voltage, real power, power factor, demand, harmonics, supply outages, waveform capture
SettingBy laptop, operator control panel, Scada
InstallationMounted on the pole or substation frame
ProtocolsDNP3, IEC 870-5-101/104Modbus/IP and DNP3/IP
CommunicationRadio, modem, GSM, V23, RS232, RS485, 10BaseT Ethernet
Switch or sectionaliser monitoring and control unitFault indicator: phase and earth fault
MeasurementCurrent, voltage, real power, reactive power, power factor, demand, cos
Capacity2 switches
Battery auto nomy16h
Motorisation voltage24-48 Vdc
ProtocolsModbus, Modbus/IP,IEC 870-5-101/104, DNP3, DNP3/IP
CommunicationRadio, PSTN, GSM, GPRS
Detectionphase and earth fault
Settingon site by dip switch
Installationclip on or polemounted
Earthing systemdirect,impedant,compensated,isolated
Associated with a pole mounted switch
Ensures remote controland automated management
Advanced controller associated with N, U and W Series reclosers, and RL Series sectionaliser
Remote setting with WSOS moni-toring and control software
Electronics sealed to IP65, 316 grade stainless steel enclosure
Earth andphase-to-phase fault indicatorsfor overheaddistribution lines
Lithium battery power
digital digital digital
38
IEC/ANSI
1250 A
25 kA
SF6
Fixed circuit breaker
Front or side mountedmechanism
VIP integrated trip unit (without auxiliary power supply) in SFset up to 24 kV
SF1, SFset
38
Manual or automatic load break switch
Sectionaliser capabilities on voltage and current
Advanced protection, control and communication
Remote controlled with ADVC controller
EasergyFlite 116-SA/G200
Communicating fault cur-rent detector for overhead lines Single-phase ammetric detector
Detection Phase-to-phase and phase-to-earth fault
Installation clip on or G200 pole mounted
Protocols IEC 870-5-101, Serial DNP3 and TCP/IP, Modbus
Communication 915 MHz short range radio communication 1 SCADA communication port Transmission interface: radio, GSM, GPRS