Pre-treatment and treatment of water - Caramondani
Transcript of Pre-treatment and treatment of water - Caramondani
Pre-treatment and treatment of water Oil and grease separators
Stormwater treatment units
Dry-docks units
Sludge traps
Options
2016
a competence centre at your service
Located in Normandy, on an industrial site of 8 hectares,
Techneau has developed internally all skills for design,
development, manufacture and commercialization of its
products.
Bi-component coating application unit
Chaudreau has been continuing its development to become within 12 years a major and well-known actor in the production of: • moulds for plastic and polyester industries,• hydraulic equipment (penstocks and flow controllers),• units for water pre-treatment and treatment,• floor equipment (manhole covers, stainless steel
siphons and gutters)
The production site represents 4500 m², it is equipped with 13 overhead cranes and is composed of:• 1 plasma cutting bench of 2 x 4 m• 1 CNC nibbler• 4 half cranes• 1 welding column & boom manipulator• 1 stainless steel treatment unit
Acknowledged industrial expertiseIn 1991 the Techneau adventure began focusing on the creation and development of innovative products destined for the water pre-treatment, pumping, and flow regulation sector.
In 1998, Techneau created the Plasteau company in order to jointly develop the production of rotomoulded polyethylene hollow tanks.
Specialized in the production of on-piece hollow bodies of large volume dedicated to the management and reclamation of rain water for the industry sector and local communities, Plasteau is equipped with 4 machines able to produce spheres of up to dia. 3.5 m.
The industrial boiler manufacturer, Chaudreau, was created in 2001. This allowed Techneau to industrialize its production tool, while keeping
flexibility on customization.
Industrial boiler making
Demonstration of our involvement in sailing
sports: The Class 40 Techneau sailing boat
has participated in the famous transatlantic
solo race “Route du Rhum 2010”.
2
Sales Department for EXPORT
Sales Department for mainland France
Our Research and Development department is composed of 15 technicians and engineers in charge of studying your needs and anticipating tomorrow’s products. The Quality unit tests and validates each product before releasing it to the market.
A Research & Development department Inventing tomorrow’s products…
Prés
enta
tion
A Sales Department as close as possible to your expectations…12 area managers together with 7 sedentary technical salesmen are available to study and propose the most relevant technical solutions for your projects and jobsites.
With more than 25,000 technical offers per year, Techneau remains close to its initial commitment: guarantee you a precise customized study within a 24 to 48 hours deadline.
A large stock at your disposal for an even more efficient responsiveness…70 references, representing more than 350 units, are always on stock ready to be dispatched on the very same day as your order.
Polyester workshop
+33 2 33 56 66 43
3
Rain water treatmentTechneau, a multi-material competence
www.techneau.comwww.techneau.com54 2 016 e d i t i o n2 016 e d i t i o n
*Techneau water treatment apparatuses are made (according to catalogue numbers) of: • recyclable rotomoulded polyethylene • galvanized boiled steel S235JR peened SA 2,5, painted / with internal / external bi-component coating based on polyamid
adduct/epoxy resins, • polyester, by orthogonal filament winding • stainless steel 304L (only for grease separators and mini separators of NS between 0,75 and 15 l/s)
Recommended material*
Installation Polyethylene Painted steel Polyester Stainless steel
Green areas • •
Groundwater table • • •
Roads 15 to 250 kN • •
Road 400 kN • •
Above-ground installation • • •
Installation in saline environment • •
Corrosive effluent Ph <3 • • •
Steel, stainless steel, polyester or polyethylene, the material for a separator is defined on the basis of its installation constraints. Below are our recommendations for the choice of the material according to installation requirements
Specific installation constraints for every material
GRP (polyester)Designed corrosive and salty environment
4
Wide and deep range of fully adaptable products
Steel
Rainwater treatment Innovation at the service of water
www.techneau.comwww.techneau.com54 2 016 e d i t i o n2 016 e d i t i o n
Each material has its own characteristics, which must be taken into consideration before making a decision
According to its advantages
Recommended material*
Criterias Polyetylene Painted steel Polyester Stainless steel
Handling
Storage
Installation easiness
Mechanical resistance
Maintenance
Corrosion resistance
Availability +
Custom-tailored production
: highly adapted : adapted : poorly adapted
5
Stainless steelPerfect for corrosive effluents from food processing industry and catering.
PolyethyleneMono-bloc pieces for out-standing price/performance ratio
76
www.techneau.com2 016 e d i t i o n
Techneau, water engineering departmentA variety of services
A 4 hectares storage area
A polyester workshop
A polyethylene workshop
Boiler workshop
Your sales advisors Sales department
Logistic solutions tailored to your needsA sales department to provide you with information or guide you in choosing your product
In the office1
3
4
5
6
7
8
Pascal SAMSONFR / EN / ESPTel. +33 (0)6 84 78 68 26 [email protected]
Julio PAYO ESP Tel. +34 672 18 18 77 [email protected]
Borys PEŁKA PL / ENTel. +48 42 717 93 93 [email protected]
Lukas ROCEK CZ / SK / FR / ENTel. +420 602 16 71 72 [email protected]
Bernard ISERENTANTBE / NL / EN / DTel. +32 475 24 24 77 [email protected]
Bernard ISERENTANT FR / DE / ENTel. + 32 475 24 24 77 [email protected]
Davor JURISICHR / EN / DTel. +385 99 475 3110 [email protected]
1
3
4
5
67
8
9
10
Gabor FAJCSAKHG / EN / DTel. +36 704 25 9972 [email protected]
910 David LESECQ
Sales directorTel. +33 233 56 66 43 [email protected]
France
Export department, on the field...
Séverine PREVOST FR / EN / ESPTel. +33 233 56 67 78 [email protected]
Stéphanie LEVAUFREFR / EN / ESPTel. +33 233 77 58 02 [email protected]
Anne SIMONLogistics / sales administrationTel. +33 233 56 66 43 [email protected]
6
76
• more calculation software• our catalogues can be accessed online and
printed out • Information on quality: discover our 9001
certificate and environmental measures
www.techneau.com2 016 e d i t i o n
Techneau, for 25 years pleased to help you
Dedicated marketing tools
Access the best of water treatment in one single click
Marquage coté manche T-shirt Proportions bloc cliquable : 9 cm de long
www.techneau.com
A new website
Export department Commissioning Department Floor equipments Department
Commissioning Department ManagerEmmanuel Aumont: Tel. +33 2 33 77 21 19
Assistant: Nadine Mesnil:Tel. +33 2 33 77 21 11
Our subsidiaries in Poland, Czech Republic and Spain are attentive to your needs.
Export ManagerPascal Samson:Tel. +33 2 33 77 21 17 [email protected]
Sales departmentSéverine Prevost: Tel. +33 2 33 56 67 78dept. 971, 972, 973, 976, 977, 978, 987, 988 [email protected]
Stéphanie Levaufre: Tel. +33 2 33 77 58 02dept. 974, 975, 976 [email protected]
7
Rainwater treatment:Oil separators or stormwater treatment units: the challenges of treatment
www.techneau.comwww.techneau.com98 2 016 e d i t i o n2 016 e d i t i o n
We must now deal with different types of pollution and pollutants requiring adapted material for treating stormwater the best way.
1 I Few job site references...
Storm water treatment unit for steel complex Corrugados Getafe (Spain)
Steel oil separator 200 l/s in Toulouse ring (FR-31)Steel oil separator 600 l/s - Peugeot Factory in Etuppes (FR-25)
Tailor made GRP oil separator for Slovakian motorway (Slovak Republic)
Tailor made steel oil separator - Nuclear plant EPR Flamanville (FR-50)
Steel storm water treatment unit Goodman site in Douai (FR-59)
GRP storm water treatment units 80 l/s (HL = 2m/hTown of Poitiers (FR-86)
Rectangular steel separators before shipment in our facility
Steel oil separator in scrapping yard Pamplona (Spain)
GRP oil separator 135 l/s Karlovy Vary ring (Czech Republic)
Commercial premises
GRP oil separators inner harbour - Réunion Island (FR-97)
Industrial sites
Logistics centres
Business areas
GRP oil separator 560 l/s in Gran Canarias Airport - Islas Canarias (Spain)
Urban and suburban transport networks
8
Stormwater treatment:Technical equipment for specific applications
www.techneau.comwww.techneau.com98 2 016 e d i t i o n2 016 e d i t i o n
The illustration below presents our two main product families:
Sludge traps and oil separators
Stormwater treatment units
2 I Treatment ranges of products
3 I Uses This equipment can be used on the following sites:
Petrol stationWashing areaCovered car parkHydrocarbon storage areaTechnical area polluted with hydrocarbons
Uncovered car parkCommercial areaIndustrial parkUrban areaLogistic area Road, highway Port area (1).
Sludge trap, oli separator
or
Stormwater treatment units
(1) The stormwater treatment unit can be developped on specific projects such as dry-docks for boats. Its configuration will change because the requested efficiency treatment is different than the one from jobsites above. The products will be identified under following description: Treatment units of dry-docks.
9
Oil s
epar
ator
www.techneau.comwww.techneau.com1110 2 016 e d i t i o n2 016 e d i t i o n10
Stor
mw
ater
tr
eatm
ent u
nits
Range2016Stormwatertreatment units
www.techneau.comwww.techneau.com4342 2 016 e d i t i o n2 016 e d i t i o n
www.techneau.comwww.techneau.com4342 2 016 e d i t i o n2 016 e d i t i o n
Technical charter and manufacturing p. 44 - 45
Stormwater treatment units: what size based on the surface area? p. 46
Vertical storm-water treatment units without By-Pass p. 47
Vertical storm-water treatment units with By-Pass p. 48
Horizontal storm-water treatment units without By-Pass p. 49
C
onform to
charter
Conforme
à la charte
Conforme
à la charte
Conforme
à la charte
V1 V2
V3 V4
V5
Stormwater treatment unitsRainwater
Technical charter and manufacturing
Polyester
Steel
www.techneau.comwww.techneau.com
Stor
mw
ater
tr
eatm
ent u
nits
4544 2 016 e d i t i o n2 016 e d i t i o n
1.1. Scope of application
”This document applies to outdoor car parks (vehicles) and road networks (roads and motorways), where pollution is characterised mainly by suspended matter to which the majority (80%) of contaminants are attached. These structures are also able to capture long-term and accidental pollution due to lightweight liquids.”
1.2. Purification systemThe most frequently adopted purification system consists of treating rainwater at a fraction of the peak flow rate:• by using a calibrated threshold regulation chamber providing controlled flow rate to the stormwater treatment unit.• downstream of a stormwater basin with controlled upstream flow rate.
1.3. Sizing1.3.1. Nominal size
Depending on the location, rainfalls less than 16 mm/h represent 75% to 95% of rainfall volumes.Using continuous flow operation, rainfall of 16 mm/h, combined with a 90% imperviousness coefficient, produces an associated run-off flow rate of 40 L/s/ha, the value taken as treatment flow rate for a stormwater treatment unit.This threshold of 40 L/s/ha is used to treat:
• run-off water from the leaching phase (characterised by low flow rates and high concentrations at the beginning of the shower),
• a large majority (75% to 95%) of run-off water depending on the region.Given the characteristics of the contaminant loading coming from impervious urban surfaces, the hydraulic loading (or Hazen velocity) of a stormwater treatment unit is set at 2 m/h.
1.3.2. Storage volumes
Several hydraulic sizing criteria have been identified and defined, thus ensuring optimum treatment quality, particularly:
1.4. AccessibilityPriority is given to large-sized access with the following requirements:
• access to all chambers, complying with standard EN 476,• good access to the baffle plate section to facilitate cleaning of the baffles with inspection covers of minimum cross-
section 0.5 m² and minimum total opening surface area of 0.25 m² per linear metre of baffle blocks.
1.5. Structural stability and liningThe structural stability and requirements for materials and linings will comply with requirements defined in standards EN 858-1 and P16-454-1/CN.
The lack of a published standard covering particle settlement led the ISGH association to define a detailed Technical Charter, a true reference guide for the industry. This Technical Charter defines:
• a specific scope of application,
• a purification system,
• sizing,
• accessibility,
• structural stability and lining.
1. Technical Charter
4.1 Installation en by-pass du réseau principale
En amont, pose d’une chambre de régulation à seuil calibré permettant de :
Contrôler et d’analyser les évènements pluvieux. Garantir une maîtrise des flux quel que soit la période de retour prise en considération. Sécuriser l’ouvrage de traitement lors des opérations d’entretien. Réduire l’emprise foncière grâce à une conception très compacte de toute la filière.
Ce dispositif de régulation, véritable innovation de Techneau, fait l’objet d’un brevet dont le dépôt est le n° 13/61517.
Flow velocity
Storage capacity for settled sludges
Definition of the hydraulic loading (2 m/h)
Catchment area
4.1 Installation en by-pass du réseau principale
En amont, pose d’une chambre de régulation à seuil calibré permettant de :
Contrôler et d’analyser les évènements pluvieux. Garantir une maîtrise des flux quel que soit la période de retour prise en considération. Sécuriser l’ouvrage de traitement lors des opérations d’entretien. Réduire l’emprise foncière grâce à une conception très compacte de toute la filière.
Ce dispositif de régulation, véritable innovation de Techneau, fait l’objet d’un brevet dont le dépôt est le n° 13/61517.
Flow velocity
Storage capacity for settled sludges
Definition of the hydraulic loading (2 m/h)
Catchment area
Stor
mw
ater
tr
eatm
ent u
nits
Stormwater treatment unitsTechnical charter and manufacturing
Rainwater Polyester
Steel
www.techneau.comwww.techneau.com4544 2 016 e d i t i o n2 016 e d i t i o n
3. Hydraulic flow
TECHNEAU stormwater treatment units are manufactured either from welded steel sheet S235JR (standard EN 10025) with an interior and exterior bi-component epoxy lining, or from polyester.
2.1. Common equipment
From 2 to 5 cylindrical manholes for easy maintenance.A high capacity sand trap (2 m3/ha) to trap the maximum of floaters and heavy matter.A grille to capture floaters. Its mesh is smaller than the hydraulic diameter of the tubular cluster located downstream.An ® recycled PVC tubular cluster, inclined at 60° and removable, all specially developed by Techneau for this application.A high capacity sludge sump (3 m3/ha).A discharge baffle system splitting the hydraulic flow uniformly over the entire filter.Effluent collection channels (out of water when no water circulating).
2.2. Equipment specific to horizontal models
A 0.3 m2 hatch to inspect the sludge sump located below the filter.
One or more drainage columns for sludge, DN 100, on horizontal NH systems.
Techneau stormwater treatment units, made according to the charter, consist of 3 successive chambers:
C
onform to
charter
Conforme
à la charte
Conforme
à la charte
Conforme
à la charte
V1 V2
V3 V4
V5
2. Manufacturing Fabrication française
B
Effluents to be treated
3rd chamber
Sand trap
Macro-waste trap
Treated water
collection
1st chamber
2nd chamberSettling and storage of
suspended matter
Tubular cluster
Detail of the 0.3 m2 inspection hatch
Discharge baffle for equal distribution of hydraulic flow, ensuring maximum
efficiency
Syphon-trap outlet to stop lightweight liquids
Large openings for easy maintenance and better accessibility, particularly to
the tubular cluster
Sand trap stopping as much heavy and floating matter as possible
Drainage column to facilitate sludge removal
removable tubular cluster to settle suspended matter
®
Large capacity sludge storage sump (3 m3/ha).
By being isolated from passing flow, prevents resuspension of
trapped sludge.
innovationinnovation innovation innovation innovation
innovation
innovation
innovation innovation
new new new new new new
new new new
Stormwater treatment unitsTypes of installation, what size based on the surface area?
Rainwater Polyester
Steel
www.techneau.comwww.techneau.com
Stor
mw
ater
tr
eatm
ent u
nits
4746 2 016 e d i t i o n2 016 e d i t i o n
4.1. Installation upstream of a storm basin configuration recommended by ISG
S urface imperméabilisée
Area By-Pass integrated
in m²
400 NVB004EA
800 NVB008EA
1200 NVB012EA
1600 NVB016EA
2000 NVB020EA
3000
NVB030EA
NH030EA
4000 NH040EA
5000 NH050EA
6000 NH060EA
7000 NH070EA
9000 NH090EA
NV030EANVB030EA
NVB020EA
NV030EA
NH050EA
NH060
NH030EA
NH040EA
EA
NH070EA
NH090EA
de repris e > 1 ha
in m²
10000 NH100EA
11000 NH110EA 12000 NH120EA 13000 NH130EA 15000 NH150EA 16000 NH160EA 18000 NH180EA 20000 NH200EA 22000 NH220EA 24000 NH240EA 26000 NH260EA 28000 NH280EA 32000 NH320EA 34000 NH340EA 36000 NH360EA 38000 NH380EA 40000 NH400EA 42000 NH420EA 44000 NH440EA 48000 NH480EA 50000 NH500EA
NV020EA
NV016EA
NV012EA
NV008EA
NV004EA
exterior
de repris e jusqu’à 1 ha
S urface imperméabilisée
Area By-Pass exterior
5. The size of a settling tank depends on the surface area to be treatedImpervious catchment surface area up to 1 ha.
For larger surface areas, ask our
engineering design office.
4.2. Installation down- stream of a storm basin with a flow rate regulator.
4.3. Installation as by-pass of the main pipeUpstream, install a calibrated threshold regulation chamber, to:• Test and analyse rainfall events.• Ensure control of flows, whatever the re-
turn period considered.• Secure the treatment facility during main-
tenance operations.• Reduce the land required using a very com-
pact design for the entire system.
This truly innovative regulating system from Techneau is covered by patent appli-cation 13/61517.
Labyrinth-type (SLE type) calibrated threshold regulation chamber
innovationinnovation innovation innovation innovation
innovation
innovation
innovation innovation
new new new new new new
new new new
4. Different installations:
Co
nform to
charter
C
onforme
à la charte
C
onforme
à la charte
C
onforme
à la charte
V1V2
V3V4
V5
Stor
mw
ater
tr
eatm
ent u
nits
Stormwater treatment unitsVertical without by-pass / from 0.04 to 0.3 ha
Stormwater PolyesterSteel
HL 2 m/h Sizes 0.04 to 0.3 ha
www.techneau.comwww.techneau.com4746 2 016 e d i t i o n2 016 e d i t i o n
• Steel tank with hoisting rings. • Bi-component coating based on
polyamid adduct/epoxy resins.• Tubular Cluster
• 2 cylindrical manholes without cover• Flat or dished bottom according to
models and treated area. • Efficiency of treatment > 75%.
OPTIONS • Visual and audible alarm see p. 83• Emptying column see p. 86
• Obturating closure device see p. 86• Safety grid (s) see p. 85
®
S urface imperméabilisée
Area By-Pass integrated
in m²
400 NVB004EA
800 NVB008EA
1200 NVB012EA
1600 NVB016EA
2000 NVB020EA
3000
NVB030EA
NH030EA
4000 NH040EA
5000 NH050EA
6000 NH060EA
7000 NH070EA
9000 NH090EA
NV030EANVB030EA
NVB020EA
NV030EA
NH050EA
NH060
NH030EA
NH040EA
EA
NH070EA
NH090EA
de repris e > 1 ha
in m²
10000 NH100EA
11000 NH110EA 12000 NH120EA 13000 NH130EA 15000 NH150EA 16000 NH160EA 18000 NH180EA 20000 NH200EA 22000 NH220EA 24000 NH240EA 26000 NH260EA 28000 NH280EA 32000 NH320EA 34000 NH340EA 36000 NH360EA 38000 NH380EA 40000 NH400EA 42000 NH420EA 44000 NH440EA 48000 NH480EA 50000 NH500EA
NV020EA
NV016EA
NV012EA
NV008EA
NV004EA
exterior
de repris e jusqu’à 1 ha
S urface imperméabilisée
Area By-Pass exterior
NV
LD
n
Fe
SH
E
ø A1 ø A2M1 M2
P1 P2
Dn
L
Dn
Fe
SH
E
ø A1 ø A2M1 M2
P1 P2
Dn
RefRange
NVø P L Dn E S Fe H M1 M2 ø
A1ø
A2 WeightStorage volume
Net volume
Total volumeSand Sludge Light liquids
NV020EA 1600 1916200
1993 1847630
2487 421 1047780
780 659 400 1301 603 3734 4336
NV030EA 1900 2282 2025 1872 2512 630 1256 950 745 600 1934 851 5336 5938
RefRange
NVP1 P2 L Dn E S Fe H M1 M2 ø
A1ø
A2 WeightStorage volume
Net volume
total volumeSand Sludge Light liquids
NV004EA 685 880 1875 100 1073 1006 434 1448 320 1239 580 580 266 80 236 293 1308 1542
NV008EA 900 1080 2335
150
10981014
530 1544 500 1414 780 780 384 160 355 497 2223 2729
NV012EA1260 1430
2135 1119580
1594 400 1313 780 780 464 240 403630
2887 3441
NV016EA 2241 1642 1514 2094 500 1320 780 780 563 320 954 3719 4273
innovationinnovation innovation innovation innovation
innovation
innovation
innovation innovation
new new new new new new
new new new
removable tubular cluster in PVC with inclination 60° to settle suspended matter
®
For upper sizes, please ask our design officeSize is given in hectares, dimensions are given in mm, weight in kg
OutletInlet
OutletInlet
Steel
HL 2 m/h Sizes 0.04 to 0.3 haStormwater treatment units
Vertical with by-pass / from 0.04 to 0.3 ha
Stormwater
www.techneau.comwww.techneau.com
Stor
mw
ater
tr
eatm
ent u
nits
4948 2 016 e d i t i o n2 016 e d i t i o n
• Steel tank with hoisting rings. • Bi-component coating based on
polyamid adduct/epoxy resins.• Tubular Cluster
• 2 cylindrical manholes without cover• Integrated by-pass• Flat or dished bottom according
to models and treated area. • Efficiency of treatment > 75%.
®
NV
B
LD
n
Fe
SH
E
ø A1 ø A2M1 M2
P1 P2
Dn
L
Dn
Fe
SH
E
ø A1 ø A2M1 M2
P1 P2
Dn
Ref Range NVB
øP L Dn E S Fe H M1 M2 ø
A1ø
A2 WeightStorage volume
Net volume
Total volumeSand Sludge Light liquids
NVB020EA 1600 1916 300 1993 1870 630 2487 421 1047 780 780 589 400 1301 603 3734 4336
NVB030EA 1900 2282 300 2023 1887 630 2512 630 1256 780 950 755 600 1934 851 5336 5938
Ref Range NVB
P1 P2 L Dn E S Fe H M1 M2 ø
A1ø
A2 WeightStorage volume
Net volume
Total volumeSand Sludge Light liquids
NVB004EA 685 880 1875 200 1073 1015 434 1448 320 1239 580 580 273 80 236 293 1307 1541
NVB008EA 900 1080 2335 300 1090 1017 530 1544 500 1414 780 780 394 160 355 497 2207 2721
NVB012EA 1260 1430 2135 300 1111 1020 580 1594 400 1313 780 780 474 240 403 630 2867 3429
NVB016EA 1260 1430 2241 300 1634 1525 580 2094 500 1320 780 780 575 320 954 630 3698 4260
OPTIONS • Visual and audible alarm see p. 83• Emptying column see p. 86
• Obturating closure device see p. 86• Safety grid (s) see p. 85
innovationinnovation innovation innovation innovation
innovation
innovation
innovation innovation
new new new new new new
new new new
removable tubular cluster in PVC with inclination 60° to settle suspended matter
®
For upper sizes, please ask our design officeSize is given in hectares, dimensions are given in mm, weight in kg
OutletInlet
OutletInlet
Stor
mw
ater
tr
eatm
ent u
nits
Stormwater treatment unitsHorizontal without by-pass / from 0.3 to 1 ha
Stormwater Steel
HL 2 m/h Sizes 0.3 to 1 ha
ø A1N2N1
M1
ø 780ø 780
M2
ø A1
L
Fe
DnD
n
SEH
ø D
ø A1N2N1
M1
ø 780ø 780
M2
ø A1
L
Fe
DnD
n
SEH
ø D
M1
ø 780ø 780
M2
ø 780N1
L
Fe
DnD
n
SEH
ø D
M1
ø 780ø 780
M2
ø 780N1
L
Fe
DnD
n
SEH
ø D
www.techneau.comwww.techneau.com4948 2 016 e d i t i o n2 016 e d i t i o n
• Steel tank with hoisting rings. • Bi-component coating based on
polyamid adduct/epoxy resins.• Tubular Cluster• Emptying column DN 100
• Hydraulic load 2 m/h• Until 4 cylindrical manholes without
cover• Efficiency of treatment > 75%. • Polyester production: please ask us.
For larger surface areas, ask
our engineering design office.
®
NH
Ref Range NH
Ø D L Dn E S Fe H M1 M2 N1 Weight
Storage volume Net
volumeTotal
volumeSand Sludge Light liquids
NH030EA 1600 4547 200 1235 1105 645 1750 693 2930 1710 976 1005 1067 751 6291 8539
Ref Range NH
Ø D L Dn E S Fe H M1 M2 N1 N2 ø A1 Weight
Storage volume Net
volumeTotal
volumeSand Sludge Light liquids
NH040EA 1600 5047 200 1235 1105 645 1750 693 3430 1110 1100 780 1080 1005 1265 805 7031 9544
NH050EA 1600 5547 200 1235 1105 645 1750 693 3930 1360 1350 780 1188 1005 1561 722 7772 10550
NH060EA 1600 6047 315 1206 1105 645 1750 693 4530 1880 1500 780 1302 1206 1858 640 8513 11555
NH070EA 1600 7047 315 1206 1105 645 1750 693 5430 2180 2000 780 1476 1407 2155 787 9994 13566
NH090EA 1900 6145 315 1506 1336 714 2050 823 4450 1800 1500 950 1989 1843 2899 778 12452 16572
NH100EA 1900 6645 315 1506 1336 714 2050 823 4950 1900 1800 950 2136 2056 3199 853 13517 17990
OPTIONS • Visual and audible alarm see p. 83• Safety grid (s) see p. 85• Chassis speed see p. 84
innovationinnovation innovation innovation innovation
innovation
innovation
innovation innovation
new new new new new new
new new new
removable tubular cluster in PVC with inclination 60° to settle suspended matter.
®
Size is given in hectares, dimensions are given in mm, weight in kg
For upper sizes, please ask our design officeSize is given in hectares, dimensions are given in mm, weight in kg
OutletInlet
OutletInlet
Your dealer:
Z.A. La Chevalerie50570 MARIGNY - FranceTél. : +33 (0)2 33 56 62 08Fax : +33 (0)2 33 56 61 93E-mail : [email protected]
L’INGENIERIE de l’EAU :Tél. : 02 33 56 62 08Fax : 02 33 56 61 93
. Pré-traitement des eaux Séparateurs d’hydrocarbures Séparateurs de graisses de fécules. Traitement des eaux Décanteurs dépollueurs Stations d’épuration. Equipements hydrauliques Régulateurs de débit Contrôleur de débit VORTEX Vannes murales Clapets d’extrémité. Relevage des eaux Petites collectivités Collectivités. Epuration
LES EQUIPEMENTS de SOL :Tél. : 02 33 05 36 14Fax : 02 33 77 71 01
. Couvercles de regard
. Siphons & Caniveaux
L’INGENIERIE de l’EAU :
. Pré-traitement des eaux Séparateurs d’hydrocarbures Séparateurs de graisses de fécules. Traitement des eaux Décanteurs dépollueurs Stations d’épuration. Equipements hydrauliques Régulateurs de débit Contrôleur de débit VORTEX Vannes murales Clapets d’extrémité. Relevage des eaux Petites collectivités Collectivités. Epuration
LES EQUIPEMENTS de SOL :Tél. : 02 33 05 36 14Fax : 02 33 77 71 01
. Couvercles de regard
. Siphons & Caniveaux
www.techneau.com
Z.A. La Chevalerie50570 MARIGNY - FranceTél. : +33 (0)2 33 56 62 08Fax : +33 (0)2 33 56 61 93E-mail : [email protected]
L’INGENIERIE de l’EAU :Tél. : 02 33 56 62 08Fax : 02 33 56 61 93
. Pré-traitement des eaux Séparateurs d’hydrocarbures Séparateurs de graisses de fécules. Traitement des eaux Décanteurs dépollueurs Stations d’épuration. Equipements hydrauliques Régulateurs de débit Contrôleur de débit VORTEX Vannes murales Clapets d’extrémité. Relevage des eaux Petites collectivités Collectivités. Epuration
LES EQUIPEMENTS de SOL :Tél. : 02 33 05 36 14Fax : 02 33 77 71 01
. Couvercles de regard
. Siphons & Caniveaux
L’INGENIERIE de l’EAU :
. Pré-traitement des eaux Séparateurs d’hydrocarbures Séparateurs de graisses de fécules. Traitement des eaux Décanteurs dépollueurs Stations d’épuration. Equipements hydrauliques Régulateurs de débit Contrôleur de débit VORTEX Vannes murales Clapets d’extrémité. Relevage des eaux Petites collectivités Collectivités. Epuration
LES EQUIPEMENTS de SOL :Tél. : 02 33 05 36 14Fax : 02 33 77 71 01
. Couvercles de regard
. Siphons & Caniveaux
www.techneau.com
WATER ENGINEERING
• Water pretreatment Oil separators Grease / Starch separators• Water treatment Storm water treatment units Sewage treatment plants• Hydraulic equipments Flow regulators Vortex flow controllers Penstocks Non return valves• Treatment
Tel.: 00 33 2 33 56 62 08Fax: 00 33 2 33 56 61 93
FLOOR DRAIN EQUIPMENTS
• Manhole covers• Floor drains & gutters
Tel.: 00 33 2 33 05 36 14Fax: 00 33 2 33 77 71 01
is also
Your dealer:
Company certified member of
WATER ENGINEERING
• Water treatment Polyethylene, polyester, steel oil
and grease separators• Water pumping Polyethylene, polyester pumping
stations• Hydraulic equipments Flow regulators Vortex flow controllers Penstocks Non return valves
Phone: +33 2 33 56 62 08 Fax: +33 2 33 56 61 93
FLOOR DRAIN EQUIPMENTS
• Manhole covers• Stainless steel floor drains & gutters
Tel.: +33 2 33 77 58 05 Fax: +33 2 33 77 71 01
www.techneau.com
Z.A. La Chevalerie50570 MARIGNY - FranceTél. : +33 2 33 56 66 43Fax : +33 2 33 56 61 93E-mail : [email protected]
is also
Company certified member of
Ocean races: mini-Transat, Route du Rhum, Fastnet Race, ...
Promotion of young people in water sports (French RAID championship)
Multi-stage sailing races: the Solitaire du Figaro.
Our commitment
to water sports
Ref
. 92
720.
06-
2016
Edi
tion
. Com
mitte
d to
con
tinu
ous
impr
ovem
ent
of it
s ra
nge,
Tec
hnea
u re
serv
es t
he r
ight
to
mod
ify t
he d
imen
sion
al c
hara
cter
istics
of
its
prod
ucts
witho
ut p
rior
not
ice.
.