[PPT]Click To Add Title, Arial 30 pts - Rockwell...
Transcript of [PPT]Click To Add Title, Arial 30 pts - Rockwell...
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 5700 Industrial Switch OverviewCompact and scalable solutions for EtherNet/IP networks
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Today’s Pain Points
Ethernet networks continue to grow: Each machine adds another 5 - 50 Ethernet nodes Every line adds another 250 - 1,000 Ethernet nodes Each new product solves a new problem but adds more nodes A consequence of convergence is so many more devices are connected to the same
flat network
You need products and solutions that can help you simplify your network
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Get the Right Information to the Right Person, at the Right Time
3
z
Plant Management View• Provide performance rollup• View asset utilization/yields
Maintenance View• Keep your machines running in peak
condition to increase your OEE• Identify root cause to minimize MTTR
Operator View• Simplify your machine operations• Diagnostics where you need them
Increase customer value by simplifying the integration of your machine into their existing network infrastructure
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Presentation
Source
Delivery
Real-time Information
Rockwell Automation & our partners have the right solutions to meet your network requirements
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Agenda
Hardware & Advanced Features
Stratix 5700 Overview
Simple Configuration & Maintenance Tools
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
The Stratix PortfolioIntegrating industrial and enterprise environments
• Productivity• Energy Savings• Safe Operations
• Time to Market• Scale & Modularity• Protecting IP
Switches for: Applications for small to complex
networks Monitor and control distributed devices Plant floor and enterprise integration
Addressing the needs of automation professionals…
Stratix 8000/8300Layer 2, Layer 3
Stratix 2000Unmanaged
Stratix 6000Layer 2
Stratix ETAPs
Stratix 5700Layer 2
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
The Stratix PortfolioIntegrating industrial and enterprise environments
Technology that offers: Scalable solutions Common, familiar tools
Cisco IOS & Configuration tools
Premier Integration within RA Integrated Architecture
Advanced switching, routing & security features Operator / maintenance-ready with built-in back-upManufacturing IT
… as well as operations & IT professionals
Stratix 8000/8300Layer 2, Layer 3
Stratix 2000Unmanaged
Stratix 6000Layer 2
Stratix ETAPs
Stratix 5700Layer 2
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
The Stratix 5700Layer 2 Managed Switches with Cisco Technology
Premiere Integration to the Integrated Architecture CIP interface
Studio 5000 AOP ControlLogix tags FactoryTalk View faceplates
Built with Cisco technology (IOS) Common feature set with Stratix 8x00 Common IT development tools
(CLI, CNA, DM, CiscoWorks) Simple to Deploy & Maintain
Easy integration Default configurations Common Smartports DHCP per port IP addressing
Easy maintenance Secure Digital card for configuration backup Diagnostics & network management tools
Compact & Scalable
Best of Rockwell & Cisco in a compact size
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Stratix 5700 Configurations 3 base platforms offering 20 configurations
6, 10 & 20 port base units 6 copper & 4 copper + 2 SFP slots 8 copper + 2 combo* 16 copper + 2 combo* + 2 SFP slots
2 Gig port option SFP slots support multi & single mode fiber
Wide variety of SFPs available Compatible with other Cisco SFPs
Advanced feature set to address: EtherNet/IP applications Security Resiliency & Redundancy
Two software packages to choose from Lite & Full versions
Conformal coating option for harsh environments*Combo ports can be either copper or SFP
Ideal for simple to complex applications
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Hardware Features
Dual (independent) power inputs 12/24/48VDC
Secure Digital storage card (optional) Stores configuration and IOS of
switch Alarm Relays
Two 24V configurable alarm inputs and single output
Console port Serial and USB port for direct
switch access Port and mode LEDs Dual ground contacts Din rail mount Temperature
-40° C to 60° C OperatingSecure Digital card
for backup(1784-SD1)
Redundant power
Configurable Alarm Relays
Port & mode LEDs
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
H x W x D
6 Port 5.1” x 2.95” x 4.3”130mm x 75mm x 109mm
10 port 5.1” x 3.6” x 4.3”130mm x 91mm x 109mm
10 port w/1588+NAT
5.1” x 3.6” x 5.05”130mm x 91mm x 128mm
20 port 5.1” x 5.0” x 5.05”130mm x 127mm x 128mm
Product Dimensions
Reduce cabinet space with a smaller form
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
The Stratix 5700 Engine = Cisco IOS
Cisco IOS® Software is the most widely leveraged network infrastructure software in the world
Currently operating on millions of active systems, ranging from the small home office router to the core systems of the world's largest service provider networks
Cisco's leadership in switching & routing is now in industrial Ethernet applications
Providing Robust, Reliable and Secure networking at the machine and plant levels
Copyright © 2012 Rockwell Automation, Inc. All rights reserved. 13
Optional Software Feature Set
Based of of Cisco IOS® Software World's leading network infrastructure software
Common feature set and configuration tools with Stratix 8x00 family
Software option: Lite - Ideal for machine level networks with
limited integration into a plant-wide infrastructure
Full – Ideal when machines that need to integrate with a converged plant-wide infrastructure
Includes IT- friendly features and functions
Hardware and software options helping to reduce your costs yet give you the performance & functionality you need
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Highlighted Features:Automation
Optimizing network performance QoS – Quality of Service - default configurations are set to ODVA standards for EtherNet/IP industrial applications for
discrete, motion, safety and process applications IEEE1588 (CIP Sync) - ODVA implementation of the IEEE 1588 precision time protocol ensures performance when
connecting EtherNet/IP devices
Securing the machine CIP port control and fault detection - enable/disable port access based on Logix controller program or controller
mode (idle/fault) to limit access to the network based on machine conditions
Simplify design, deployment and maintainability DHCP per port - assign a specific IP address to each port, ensuring that the device attached to a given port will get the
same IP address Broken Wire Detection - detect cabling problems like, open, broken, cut or shorted twisted-pair wires, with status
availability in Logix Network Address Translation – NAT – A 1:1 IP address translation to help segment machine level network devices
from the plant network, translate only the devices that need to be visible to the plant network (Future Release 1.5 Q1CY13)
Designed & developed for EtherNet/IP applications
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Highlighted Features: Security
Protecting the machine Application/Project (CIP) based port access
Controller based port control (on/off) Port access based on controller mode (idle/fault) Unauthorized device identification (tags) per port
Configurable port security Preconfigured port security set-up via smartports Configure number of devices allowed per port Configurable device MAC ID authentication
Protecting the plant Encrypted administrative traffic
SSHv2, SNMPv3, and HTTPS Advanced security features
802.1x for user authentication Multiple layers of password protection Access Control Lists (ACLs) to apply security policies per port TACACS+ and Radius for centralized authentication
Simplified tools to help machine builders protect their machinesAdvance feature set to meet IT standards and policy
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Highlighted Features:Resiliency & Redundancy
Spanning Tree Protocol (STP/RSTP) <1sec recovery time
Resilient Ethernet Protocol (REP) Ring Topology <70ms recovery time
Flex Links – Redundant Star Topology <60msec recovery time
EtherChannel - Redundant Star Topology Port link aggregation - load sharing &
redundancy <100msec recovery time
The right technology to meet your needs
When network availability is critical to the application
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
NAT OverviewNetwork Address Translation
Provides 1 to 1 IP address translations Maximum 1 subnet and 127 single translations Translations provided on uplink ports
One or both ports for ring support Translation table is stored as part of switch configuration
Line Controller
Send message to Machine 2 PAC at address 10.10.11.2
192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5
Machine 1 NAT Translation192.168.1.2 = 10.10.10.2
192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5
Machine 2 NAT Translation192.168.1.2 = 10.10.11.2
Stratix 8300
Send message to Machine 1 PAC at address 10.10.10.2
REP
Cable break
Improve system uptime by adding a Ring using REPContinue to send messages to Machine 1 PAC at address 10.10.10.2 when broken connection
Easily integrate machines into existing network architectures
Available in Q1CY13
Can help segment machine network from plant network
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Agenda
Hardware & Advanced Features
Stratix 5700 Overview
Simple Configuration & Maintenance Tools
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Common Toolsets for Controls & IT
Automation Professionals FactoryTalk Services
Tightly integrates into the Integrated Architecture (IA)
IT Professionals Cisco CNA, CLI, CiscoWorks
Tightly integrates into joint Cisco and Rockwell Automation Converged Plantwide Ethernet (CPwE) Reference Architectures
The right tools for the right person
Configure, Manage and Diagnose your network with familiar tools
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Premier Integration into the Integrated Architecture
Advanced status and diagnostic information Logix Predefined Tags Product identification I/O connection Port Status Alarms Broken wire detection Save and restore Link Status Unauthorized device Threshold exceeded Bandwidth Utilization Alarm relays Port Control
Device Profiles, Configuration Wizards, Operator Faceplates
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Integrated into Studio 5000™
Add On Profile (AOP) Add Stratix switches into the
project just like you would I/O, Drives, Communication modules
Simple configuration and diagnostic tags available in the profile
Advanced diagnostics, including broken wire detection
You don’t need to be an IT professional to configure or manage the switch
Simplifies configuration and maintenance
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
FactoryTalk™ View Faceplates
Helps provide the diagnostics where you need them to get equipment back up and running… quickly
Help
AlarmsConfiguration
Status
Trending
Pre-engineered faceplates for network monitoring
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Express Setup
Tailored for industrial automation applications Automatically sets many parameters including:
Enables CIP Configures network traffic prioritization
(QoS) settings for EtherNet/IP CIP, CIP Safety, CIP Sync, CIP Motion,
time synchronization (PTP) and other network traffic
Enables Layer 2 loop prevention (STP) Enables alarms, SYSLOG, and SNMP
notifications Enables IGMP snooping and querier
Automatically sets up the switch for control system applications
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Device Manager
Web based graphical device management tool Dashboard, Configure, Monitor and
Maintenance views to help manage and diagnose network issues
Displays real-time views of configuration and performance
Simplifies task of setting up switch ports Express Set-up, Smartports
Graphical displays to easily monitor & diagnose the switch
Alarm tools to alert, identify and help solve network problems
Connect securely from your internet browser
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Smartports Are a set of recommended configurations that can
be set on a specific switch port
Pre-defined settings for common devices like Logix controllers, I/O, ETAPs, Desktop devices
Optimizes traffic through the network Minimizes latency
Create, modify, import, export and develop custom Smartport macros
Select the device to the assigned port, the configuration parameters are assigned to the port
Create your own Smartport to customize and develop your own standards
Simplifies deployment and commissioning of equipment
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Cisco Command Line Interface - CLI
CLI is the Cisco primary user interface for configuring, monitoring and maintaining Cisco devices
It is the primary tool used by IT professionals today
Used for advanced configurations Global macros and Smartports are
simply user friendly CLI scripts Available on Stratix 8000/8300 & 5700
IT professionals know and understand the language, helps with product acceptance when IT is involved
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Single management tool for both IT and plantSame tool already monitoring the plant network
Cisco Network Assistant – CNA
Network management tool for: Configuration Monitoring Troubleshooting Maintenance
Compatible with Stratix 5700 & 8x00 family Free download from Cisco website
http://www.cisco.com/cisco/software/release.html
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Configuration Copy and Backup Options
Secure Digital (SD) support Contains switch configuration and IOS Simple device replacement
Quickly duplicate and manage configurations Standard configurations copied to:
Multiple SD cards Multiple switches
Store and copy on a PC Configuration file can be edited on PC as .txt file Edit and copy to SD card for fast deployments
Store configuration as part of Studio 5000 project
Simplify duplication & storing switch configurations
A
B
C
A
A
AA
B
C
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Easy Switch Replacement Simplifies On-site Maintenance
SD card stores entire configuration Operating system (IOS) Configuration parameters
Install SD card from failed switch into replacement switch
Power on and the switch is back to its required configuration
NO PC, NO set-up, NO configuration required!
Get your machines back up and running FAST!
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Tools and Solutions
Simplifies the configuration, deployment and maintainability of
the network
Differentiate normal and priority traffic – Motion, Information, I/O,
Safety, Video, etc.
Reduces risk of down networks due to human error or threats
When resiliency and redundancy is critical to your applications
Simplifying network design & management
Performance of the Network Standard QoS with CIP Policies Time Synchronization
IEEE 1588 Precision Time Protocol
Security Programmatic port control Industry standard user authentication (802.1x) Encrypted management traffic Advanced Cisco compatible features (ACLs)
Resiliency & Redundancy REP (Resilient Ethernet Protocol) – Ring
<70ms recovery time Flex Link – Redundant Star
<60msec recovery time EtherChannel – load sharing & redundancy Spanning Tree Protocol – Redundant star
<1 sec recovery time
Common Program & Monitoring tools Rockwell Automation Tools:
RSLogix Add On Profile (AOP) Pre-defined Logix tags, View Faceplates
Cisco Tools: Command Line Interface (CLI),Cisco Network Assistant (CAN)
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
We have Product & Services to help
Products•Switching and routing
•Media•Gateways
Service•On-site Assessments
•Installation•Training•Network and security services
Support• Remote diagnostics• Real-time phone and chat support
• Knowledgebase• Forums• On-site support• Migration• Commissioning• Asset management
Rockwell Automation & our partners have the right solutions to meet your network requirements
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
Questions?
For more information http://ab.rockwellautomation.com/Networks-and-Communications/Ethernet-IP-Infrastructure
37