PPT on HMT Ajmer unit By Pukhraj palariya
-
Upload
pukhraj-palariya -
Category
Education
-
view
52 -
download
0
Transcript of PPT on HMT Ajmer unit By Pukhraj palariya
GOVT. ENGINEERING COLLEGE BHARATPUR RAJ.
Submitted toMr.Rahul ShrivastavHead of mechanical department
HMT Machine tools LTD. Ajmer unit
Submitted fromPukhraj maliRoll no.:-12EELME035ME final year
Summer training presentation on
HMT Machine Tools Ltd., Ajmer
A Centre of Excellence for Grinding Solutions
Welcome
HMT MACHINE TOOLS LIMITED
MACHINE TOOLS DIVISIONAJMER Inception 1967
About HMT
• Established in 1953.
• is a multi-product, multi-technology, engineering complex with strengths of-
-16 Manufacturing units(22 Product Division) -Asserts worth over US $ 250 million -annual turnover of US $ 300 million -the Widest range of machine tools, ranging from products lathes to CNC turning/ machining centres.
• Source of qualified and experienced manpower
• Over the years diversified into Watches, Tractors, Printing Machinery, Metal Forming Presses, Die Casting & Plastic Processing Machinery, CNC Systems & Bearings
Units of Hmt in india
•Major product of Hmt ajmer is— 1.Grinding Machines :-
(cylinderical, centreless,internal,crankshaft,double disc, Horizantal & vertical tools
&cutter etc.) 2. Wide range of CNC
conventional machine:- (CNC turning centre
PUSHKAR, CNC Training Lathes)
Machine ToolsDepartments
MMS Pattern & melting &
CastingHDMS
AssemblyK130 &GCL
Tools room & Round
Foundary shop
1. Casting • In this process, a liquid material is usually poured into a mould,
which contains a hollow cavity of the desired shape, and then allowed to solidify.
The solidified part is known is as a CASTING. Which is ejected or broken out of the mold to complete the process.
2. FURNACE •Furnace is used for melting the metal . •HMT has 3 furnaces, two of 3MT capacity and one of 1.5MT
capacity •All furnaces are induction type & temperature in the furnaces
reaches up to 1400-1450˚C
3.MOULDING SAND•Moulding sand is defined as the granules particles Resulting from the breakdown of rocks.•moulding sand is also known is foundary sand.
•Main constituents of moulding sand- 1. Silica sand :- Silica 86-90% Alumina 4-8% Iron oxide 2-5%And other smaller oxide Ti, Mn and Ca 2. Green Sand :- Bentonite Clay 50-60% pulverized coal 30-40% Water As require
4.SAND MOULD
•Sand mould is a preformed sand container into which molten metal poured and allowed to solidify.
•After casting it is removed from sand mould about after 24 hours. sand mould generally destroyed.
•Manufacturing1. MMS (MEDIUM MACHINE SHOP)There are following main machine in this shop:-
2. Milling Machine (H & V)
3. Lathe Machine (Centre & Turret)
4. Boring (H & V)
5. Radial Drilling
6. Surface Grinding
ROUNDS SHOP
There are main machine in this shop:-
1. Cylindrical grinding 2. Internal Grinding 3. Centre Lathe 4. Slot Cutting 5. Circular Dividing
CLASSIFICATION OF MACHINING PROCESS
1. Drilling 2. Boring 3. Milling 4. Planing 5. Shaping 6. Slotting 7. Grinding 8. Knurling 9. Turning10. Threading 11. tapering12 Chamfering
slotting threading
Boring Grinding
. Knurling . tapering
drilling
Heat Treatment Section
• Heat treatment is expensive and long process. •In the heat treatment three point are important for this process:- 1. Time 2. Temprature 3. Material code ( which mattle use) -:Operation:- 1. Carburising:- material code - C2R,C2A,C2M Box Carburising - 850°C (8 hour ) Liquid Carburising - 1751C (4- 5 hours )
2.Harding:- material code - T1,T2,T5,T8,C45,C1 etc. Tempreature - 840-860°C ( 12- 14 hours )
3.ASSEMBLY
• K130 :- This is a cylindrical grinding machine. Here alphabet K represent the scientist “Keuring” And Numerical value indicates the maximum diameter of work-piece from ground.
Any Question ??
Thank you
HMT Machine Tools LimitedAJMER