Ppc 2010 011 Brochure Core Fx Services 2010 02

5
OILFIELD/PETROCHEMICAL EXPERIENCE PPC assists chemical, metallurgical and industrial plant owners in solving their operational and environmental problems and in planning and executing their capital projects. PPC assists chemical, metallurgical and industrial plant owners in solving their opera- tional and environmental problems and in plan- ning and executing their capital projects. We have functional expertise in testing and problem evaluation, process planning, preliminary engi- neering and cost estimating, process licensing and project management. Specific refining and petrochemical process experience follows: Operating experience on a MEK/Toluene Lube Oil Solvent Dewaxing Unit for a major refiner. Process design studies to modify an existing MEK Dewaxing Unit to primarily deoiling ap- plications for a wax-processing refinery. Crude and Vacuum Unit Design. Detailed design of Filter House modifications for a wax processing refinery. Detailed design for tank farm and other off- sites, including new pipe rack and loading rack for a wax refinery. Process studies for naphtha splitting to achieve optimum balance between reforming and isomerization for octane, maximum ben- zene reduction, overall capacity, etc. Process design to revamp an existing re- former to operate at low pressure to improve gasoline and hydrogen yield and minimize C1-C4 yield. PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966 (724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE Adding or moving a process If you are thinking about expanding or modernizing your existing facility, please consider Process Plants Corpo- ration for assisting you in this task. CORE FX OILFIELD AND RESERVOIR SERVICE SPRING 2010 PPC We provide single point re- sponsibility in performing engi- neering, procurement and con- struction (EPC) for projects. PPC has extensive experience in the petrochemical, organic and non-organic chemicals, powder metal, natural gas, syn- fuel, cement and co-generation fields. PPC delivers engineering services and products to process industries including manufacturing, chemical, petrochemical, and power generation industries. We work with our clients to deliver cost- effective and sustainable solutions through state-of-the-art tech- nologies and industry leading expertise.

Transcript of Ppc 2010 011 Brochure Core Fx Services 2010 02

Page 1: Ppc 2010 011 Brochure Core Fx Services 2010 02

OILFIELD/PETROCHEMICAL EXPERIENCEPPC assists chemical, metallurgical and industrial plant owners in solving their operational and environmental problems and in planning and executing their capital projects.

PPC assists chemical, metallurgical and

industrial plant owners in solving their opera-

tional and environmental problems and in plan-

ning and executing their capital projects. We

have functional expertise in testing and problem

evaluation, process planning, preliminary engi-

neering and cost estimating, process licensing

and project management. Specific refining and

petrochemical process experience follows:

• Operating experience on a MEK/Toluene Lube Oil Solvent Dewaxing Unit for a major refiner.

• Process design studies to modify an existing MEK Dewaxing Unit to primarily deoiling ap-plications for a wax-processing refinery.

• Crude and Vacuum Unit Design.

• Detailed design of Filter House modifications for a wax processing refinery.

• Detailed design for tank farm and other off-sites, including new pipe rack and loading rack for a wax refinery.

• Process studies for naphtha splitting to achieve optimum balance between reforming and isomerization for octane, maximum ben-zene reduction, overall capacity, etc.

• Process design to revamp an existing re-former to operate at low pressure to improve gasoline and hydrogen yield and minimize C1-C4 yield.

PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations

PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966

(724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE

Adding or moving a processIf you are thinking about expanding or modernizing your existing facility, please consider Process Plants Corpo-ration for assisting you in this task.

CORE FXOILFIELD AND RESERVOIR SERVICE SPRING 2010 PPC

We provide single point re-sponsibility in performing engi-neering, procurement and con-struction (EPC) for projects. PPC has extensive experience in the petrochemical, organic and non-organic chemicals, powder metal, natural gas, syn-fuel, cement and co-generation fields.

PPC delivers engineering services and products to process industries including manufacturing, chemical, petrochemical, and

power generation industries.  We work with our clients to deliver cost-effective and sustainable solutions through state-of-the-art tech-

nologies and industry leading expertise.

Page 2: Ppc 2010 011 Brochure Core Fx Services 2010 02

Maleic Anhydride Area Polyester Resin Area Ancillary SystemsOur industry leading experts are available

to develop a new process and study, trouble

shoot and optimize an existing process with no

or minimum down time.  Feel free to contact

us, if you have any questions and concerns

about your existing process and process

equipments and need consulting in procuring

new equipments and designing and implement-

ing a new process.

Applicable Experience in Hydrocarbon Processing

Process Plants Corporation is performing

major expansion and upgrade projects. De-

pending on the project, a full complement of

engineering disciplines are being used; proc-

ess, instruments, piping layout, electrical, civil

structural, and construction management.

After these projects have been engineered, they

are competitively bid for material and installa-

tion, and then the construction is managed by

our field personnel.

We have functional expertise in

plant testing and problem evaluation,

process planning, preliminary engi-

neering and cost estimating, process

licensing and project management.

Specific technical, analysis and proc-

ess service experience

PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations

PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966

(724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE

PROJECT LIST

Our background

of experience in propriety process development work with clients or inde-pendently with client ap-proval. PPC’S work has included highly explosive, flammable, highly toxic and high-pressure proc-ess.

We would enjoy meeting with you to present our capabilities in greater detail and assure you of our

interest in working with you on future projects.

Page 3: Ppc 2010 011 Brochure Core Fx Services 2010 02

PPC staff participated in many core analysis projects for different clients located in different countries.

Assignments for major clients

Core fixing, Haradh, Uthmania, Ghawar, Shedgum Fields,

Saudi Aramco.

Core fixing and layout, (Geo Lab) Qatar Petroleum, Core

fixing for Shell Project.

Nitrogen plugging, whole core and plug preservation,

Dukhan Field, Qatar Petroleum

Routine plugging, North Field, Qatar Shell

PVT sampling and testing, Shams field, PTTEP, Oman.

Worked on offshore and onshore rigs for core handling and

core analysis in Middle East and other countries.

Conventional core analysis for ADCO Abu Dhabi,

ADMA Abu Dhabi, ZADCO Abu Dhabi, SHELL Abu

Dhabi, QP Qatar, SHELL Qatar, PDO OMAN, PEDCO

Iran, GNPOC Sudan, in Res Lab premises Abu

Dhabi,

Laboratory Technician, Core Laboratories

PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations

PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966

(724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE

PPC Core staff completed work for

Saudi Aramco

Core Analysis - Conventional Layout and Orientation and Core Fixing.Opening Core from the tubes, cleaning the cores, marking top and bottom as per the stan-dard. Marking the depth and boxing the core. Worked on core fixing project of different Saudi Aramco wells.

LEAD CORECONSULTANT

S.M. Ismail Azam

Conventional core analysis FIXING ANALYSIS DEPTH

Core refixing, Lay out & Orientation, marking top bottom, slabbing, plug matching and re-packing. Supervisition & training of new em-ployees was part of project management responsibility.

Involved in all ma-jor analysis of the Conventional Core Analyses (CCA) Dept. Routine rock proper-ties analysis, Plugs and whole Core (Grain Density, Po-rosity, Permeabil-ity) analysis, Plug-ging (nitrogen, rou-tine), Core gamma, Core photography.

Page 4: Ppc 2010 011 Brochure Core Fx Services 2010 02

Core analyst with 20 years of ex-

perience of routine and conventional

core analysis. Well trained and experi-

enced of operating all conventional

core analysis instruments. Worked in

different companies as core analyst,

lab technician, and have participated

in many core analysis projects for dif-

ferent clients located in different coun-

tries.

As Team Leader Core Restoration,

Gulf Wells Corporation Saudi-

Supervising core restoration pro-

jects in Saudi Aramco responsibilities

include Core refixing, Lay out & Orien-

tation, marking top bottom, slabbing,

plug matching and repacking & Train-

ing of new employees.

Our PPC consultant has technical

skills include drilling, geological

(wellsite/office), geophysical, reservoir

and reservoir engineering, coring, core

fixing, core analysis, petrophysical and

log interpretation.

Having professional experience

with the leading multinational servicing

and oil and gas Operating Exploration

& Production companies he will brings

new skills to our company, the work

on different Exploration Appraisal and

Development well of Big Operating

Companies aids our clients.

Several tours of service with

Schlumberger, we have this experi-

ence for our service.

Schlumberger Logleco Inc Cairo

working as a Senior Bore hole Geolo-

gist and dealing with Operations with

different Oil and Gas Operating Com-

panies. Ensure that proper interpreta-

tion and processing methods are be-

ing used, and that routine training in

Log QC and interpretation is being

provided. Responsibilities includes

MSD, Structural and Stratigraphic

Analysis, Fracture Analysis, Deposi-

tional environment/System/

Orientation/Paleocurrent flow etc. Per-

form 3D reservoir modeling using the

Petrel software.

Nine years as Well Site Geologist/

Mud Logging Geologist, Sperry Sun

Drilling Services (A Halliburton

Company)Houston/Dubai- U.A.E Re-

gion. Mr. Azam as Well-site Geologist/

Geologist (Mud Logging) for different

operating oil and gas companies in

Asia Pacific, Gulf and African Region.

On site and hand on, Ismail performs

all drilling geological and rig site duties

on exploration, appraisal and devel-

opment and data wells as assigned.

Provides advisory support and geo-

logical guidance to drilling division

through their representative on rig site.

Ensures fulfillment of drilling,

geological/reservoir requirements and

fully implementations of well pro-

grams. On rig site work with vertical,

deviated, horizontal and multilateral

wells with different tools used for drill-

ing and logging the well.( LWD, MWD/

Well Placement). Monitor continuously

all drilling activity and gather data

generated from the logging unit. Well

trajectory data, to steer the well on

their target to get maximum reservoir.

Involved in identifying litho stra-

tigraphic formation boundaries, casing

setting depths and coring points.

Logging systems which includes all Drilling Parameters / Gas System (total gas / gas breakdown C1-C7)

In Site Software (Halliburton Mud Logging Software) /Drilling, Gas System, Seconds of Logging- Res-ervoir Integrated System (RIS)

Baker Hughes- Modular Surface System (MSS4)

Baker Hughes- Co Rep (Res lab Software)-

Ergotech Digital Modular. (Poro perm Software)-

STIM LAB DGP 310 System Poroperm- Geoframe 4.4, ELAN and Petrel.

PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations

PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966

(724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE

Page 5: Ppc 2010 011 Brochure Core Fx Services 2010 02

Sadruddin BadruddinPPC Core Analyst Engineer

PPC

As Senior Core Technican & Consultant for Process Plants Corporation, Mr. Sadruddin handles our analysis and tech-nicians in the field. He is our Core analyst with 20 years of experience of routine and con-ventional core analysis. Well trained and experienced of op-erating all conventional core analysis instruments. Worked in different companies as core analyst, lab technician, and have participated in many core analysis projects for different cli-ents located in different coun-tries.

Work Experience

Before joining PPC’s in Techni-cal Operations, Mr. Sadruddin was a Team Leader Core Resto-ration, Gulf Wells Corporation Saudi for several years. Sad-ruddin has supervised core res-toration projects for Saudi Aramco. His responsibilities in-cluded Core refixing, Lay out & Orientation, marking top bottom,

slabbing, plug matching and re-packing. Supervisition & train-ing of new employees was part of project management respon-sibility. Prior seven years Mr. Sadruddin was Core Analyst Engineer for Conventional Core Analysis, Res Lab, Abu Dhabi:

Performs jobs related to Routine Rock Properties analysis includ-ing; core preparation, core gamma, core processing (satu-ration, plugging, cleaning & slabbing), core photography, core preservation (on-site and laboratory), assists with labora-tory analyses (porosity, perme-ability, grain density). Assists with laboratory gas analyses and on-site PVT sampling.

Involved in all major analysis of the Conventional Core Analyses (CCA) Dept. Routine rock prop-erties analysis, Plugs and whole Core (Grain Density, Porosity, Permeability) analysis, Plugging (nitrogen, routine), Core gamma, Core photography.

Sadruddin will be our interna-tional field tech living where the contracts located.

...we consider ourselves a cost-

effective alternative for many of the key ancillary sys-

tems required in such an instal-lation ...PPC is not too small to

do the large projects or the small projects either...be the

lead engineering com-pany for a

PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations

PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966

(724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE