Powis Image Blank™ Print Setup- Epson WP 4020 -

PDF files from Adobe Acrobat - Windows

fig.1

fig.2

fig.3

These following settings are for printing directly from Adobe Acrobat in a Window Environment after installing the Epson WP-4020 print driver software.

How to set a User-Defined Paper Size.

1) Open your Image Blank pdf file.

2) Choose File > Print. In the drop-down menu,select WP-4020 series. (see fig. 1)

3) Click Properties

4) From the document drop down menu,select, user-defined. (see fig. 2)

In the User Define Paper Size Window. (fig. 3) Enter thefollowing information.

- Paper Size Name: 7.65”x 13.5” [194.3mm x 342.9mm] - Paper Width: 7.65” [194.3mm]- Paper Height: 13.5” [342.9mm]- Click the radial button for the correct unit of measure.

5) Click Save

fig.4

fig.5

fig.6

How to set a User-Defined Paper Size (cont’d)

6) Click OK (see fig. 4)

7) Your properties window should show the new page size. Make sure the followings are selected (see fig. 5)

- Paper Source > Rear MP Tray- Document Size > 7.65”x 13.5” [194.3mm x 342.9mm]- Orientation > Portrait- Paper Type > Premium Presentation Paper Matte- Quality > Quality

8) Click OK on your Properties Window

9) Click OK on your Print Window.

Loading Image Blank sheets into the printer

10) Be sure to load the Image Blank Sheets into the rear MP Tray with the short end first. (see fig. 6)

{ PAPER FEED DIRECTION }

How to bind using the Fastback Model 20 (fig.7)

11) Release the printed strips from its back sheet.

12) Select Image Strip mode on the binder’s LCD screen

13) Select Image Setting

14) Select STRIP WIDTH, set STRIP WRAP to desire width and set FEED DIRECTION to normal.

15) Follow the instructions on screen. Insert book back-wards and bind with front wrap of strip toward back of machine.

fig.7