Powerwave MCU 7070.30
description
Transcript of Powerwave MCU 7070.30
POWERWAVE Master Control Unit
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7070.30 (24 V) Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply 24V
DC / Current consumption 24V / <5.0A
ALD supply voltage +24 V DC
Max current draw per connector 2.7 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 ±1 V
Output current at closed 5 ± 2mA
LOCAL CONTROL PORTS (Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 IEC 60130-9 (Ed. 3.0)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*
D031-08237 Rev A Updated: Nov 8 2011 5:20PM © Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.