Powertekk Nordic Tile Isola Data sheet CZ 14.8 › assets › pdfs ›...
Transcript of Powertekk Nordic Tile Isola Data sheet CZ 14.8 › assets › pdfs ›...
I s o l a D a t a s h e e tC Z 1 4 . 8 . 2 0 1 5
Powertekk Nordic TileSteel roof covering
Product description
Isola Powertekk is a steel based, light weightroof covering system designed to provide anattractive and economic finish for all types ofroofs down to 8° pitch. The Isola PowertekkNordic tile is manufactured from cold rolled,galvanized steel and weighs only 7.7 kg/m². Thesteel thickness combined with the Nordic profileprovides superior strength and stability of thetiles.
Material descriptionClear sealantColored granuled stonesColored acrylic coatingEpoxy primerGalvanization (275 g/m2)Cold rolled steel 0,45 mmGalvanizationPolyesterApplication
New building and renovation for all slopes from8º - 90º. Good quality breathing underlayer isrecommended.
Installation
Isola Powertekk can be installed at alltemperatures likely to be met in roofing works.However at temperatures below 0°C extracare is required, particularly when drivingnails and cutting and bending tiles. On roofpitches above 8° there shall as a minimum beinstalled a breather membrane designated foruse in supported and unsupported pitched roofapplications, including warm, hybrid and coldroofs. Counterbattens and battens 30 x 50 mmare recommended. Other dimensions may beused according to local regulations and goodpractice. Standard flashings are made to fit 30mm high battens. Where the rafters are widelyspaced, the dimension of the tile battens shouldbe chosen accordingly to comply with localregulations for load bearing capacity. Please notethat the maximum width of the batten is 65 mm.Installation should be done from ridge to eaves,starting with the second horisontal row from theridge, which will be the first row of full tiles.
Storage
No special recommondations.
Powertekk Nordic TileSteel roof covering
Accessories Colours
A comprehensive range of accessoriesfor Nordic including eaves, ridge, gableend covers and ventilators completes thesystem.
Article number Color780001 Gray structure780013 Black780024 Red780025 Rustic red780036 Green780042 Brown
Technical data
Properties Value
Steel thickness: 0,45 mm
Zinc coating: 275 g/m²
Batten distance: 369 mm
Roof slope: 8º - 90º
Tile dimension: 1198 x 418 mm
Covered area: 1110 x 369 mm
Consumption: 2,44 pcs/m²
Side overlap: 88 mm
Weight / tile: 3,15 kg
Weight / m²: 7,7 kg
Snow load capacity: 2,1 kN/m²
Dimensional changes: 12 x 10-6 K-1 for steel
Working temperature: min 0ºC
External fire performance: Broof(t1), Broof(t2), Broof(t3)
Technical aproval: EN 14782:2005 / SINTEF Byggforsk (No.2265)
Packaging: 360 tiles / pallet, 147 m² / pallet