PowerStor Series SS Single-Wall Indirect Water Heater · SS-40-L SS-50-L SS-75-L SS-120-L H Floor...
2
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. PowerStor Series ® and Hydrojet ® are registered trademarks of Bradford White ® Corporation. 556-E-0220 PowerStor Series ™ SS Single-Wall Indirect Water Heater The PowerStor Series ™ SS Models Feature: ■ Stainless Steel Tank and Heat Exchanger—Made from chromium molybdenum - titanium ferritic 444 stainless steel alloy. ■ Stainless Steel Heat Exchanger—Single-wall 1" (25mm) O.D. stainless steel coil. Maximum supply temperature from the boiler must not exceed 240°F (116°C). ■ Factory-Installed Hydrojet ® Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank (excluding SS-120-L). ■ Immersed Adjustable Honeywell Aquastat—Supplied with a fast acting immersion aquastat for automatic temperature control (adjustable from 80-160°F / 27-71°C). ■ Supply and Return Connections—1" (25mm) NPT female connections are located on the front for both the boiler supply and boiler return. ■ Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity. ■ Potable Water Connections—3/4" (19mm) NPT (1" (25mm) NPT on SS-120-L). ■ T&P Relief Valve—Included. ■ Low Restrictive Brass Drain Valve—Durable tamper proof design (excluding the SS-120-L). ■ AHRI Certified—These water heaters are rated by the Air-Conditioning, Heating, and Refrigeration Institute to provide accurate performance data within the standards of the certification. This certification provides a recognized standard for proper comparison of hydronic appliances. Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts. 5-Year Limited Tank Warranties on Commercial Models / 1-Year Limited Warranty of Component Parts. For more information on warranty, please visit www.bradfordwhite.com For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater. SS-50-L
Transcript of PowerStor Series SS Single-Wall Indirect Water Heater · SS-40-L SS-50-L SS-75-L SS-120-L H Floor...
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. PowerStor Series® and Hydrojet® are registered trademarks of Bradford White® Corporation.
556-E-0220
PowerStor Series™ SSSingle-Wall Indirect Water Heater
The PowerStor Series™ SS Models Feature:
� Stainless Steel Tank and Heat Exchanger—Made from chromium molybdenum - titanium ferritic 444 stainless steel alloy.
� Stainless Steel Heat Exchanger—Single-wall 1" (25mm) O.D. stainless steel coil. Maximum supply temperature from the boiler must not exceed 240°F (116°C).
� Factory-Installed Hydrojet® Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank (excluding SS-120-L).
� Immersed Adjustable Honeywell Aquastat—Supplied with a fast acting immersion aquastat for automatic temperature control (adjustable from 80-160°F / 27-71°C).
� Supply and Return Connections—1" (25mm) NPT female connections are located on the front for both the boiler supply and boiler return.
� Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
� Potable Water Connections—3/4" (19mm) NPT (1" (25mm) NPT on SS-120-L).
� T&P Relief Valve—Included.
� Low Restrictive Brass Drain Valve—Durable tamper proof design (excluding the SS-120-L).
� AHRI Certified—These water heaters are rated by the Air-Conditioning, Heating, and Refrigeration Institute to provide accurate performance data within the standards of the certification. This certification provides a recognized standard for proper comparison of hydronic appliances.
Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.5-Year Limited Tank Warranties on Commercial Models / 1-Year Limited Warranty of Component Parts.For more information on warranty, please visit www.bradfordwhite.comFor products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.See complete copy of the warranty included with the heater.
SS-50-L
©2020, Bradford White Corporation. All rights reserved.
For field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 n Fax 215-641-1612Technical Support 800-334-3393 n Email [email protected] Warranty 800-531-2111 n Email [email protected] International: Telephone 1-215-641-9400 n Email [email protected] / www.bradfordwhite.com
Ambler, PA
PowerStor Series™ SS Single-Wall Indirect Water HeaterPowerStor Series™ SS Models Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
80% Recovery Efficiency
ModelNumber
Capacity FFloor to
ExchangerOutlet
in.
Approx.ShippingWeight
lbs.
EFloor to
Cold WaterConn.
in.
AFloor toTop ofHeater
in.
DFloor to
Hot WaterConn.
in.
CFloor to
T&PConn.
in.
BJacketDia.
in.Gal.U.S.
29385073111
SS-30-LSS-40-LSS-50-LSS-75-LSS-120-L
2431426092
315/8
381/4
4865 5/8
633/8
221/2
291/8
393/4
561/2
653/4
321/2
387/8
487/8
661/4
531/2
10101010
113/4
225/8
243/4
291/4
335/8
40
161/2
183/4
191/2
191/2
313/8
7591
103142217
32 1/2
387/8
487/8
661/4
211/16
24242424
301/4
Gal.Imp.
GFloor to
ExchangerInlet
in.
HFloor toAquastat
in.
ModelNumber
Capacity FFloor to
ExchangerOutlet
mm.
Approx.ShippingWeight
kg.
EFloor to
Cold WaterConn.
mm.
AFloor toTop ofHeater
mm.
DFloor to
Hot WaterConn.
mm.
CFloor to
T&PConn.
mm.
BJacketDia.
mm. Liters
GFloor to
ExchangerInlet
mm.
803972121916671610
610610610610768
572740
101014351670
826987
124116831359
826987
1241168368
254254254254299
575629743854
1016
419476495495797
3441476498
110142189274420
SS-30-LSS-40-LSS-50-LSS-75-LSS-120-L
HFloor toAquastat
mm.
———
423/4
———
177/8
KFloor to
Spare 3/4"Hot Water
Conn.in.
———
1086
KFloor to
Spare 3/4"Hot Water
Conn.mm.
LFloor to
Spare 3/4"Cold Water
Conn.in.
———
454
LFloor to
Spare 3/4"Cold Water
Conn.mm.
GeneralAll units are certified at 300 PSI (2068 kPa) test pressure and 150 PSI working pressure (1034 kPa). All potable water connections are 3⁄4" (19mm) NPT (1" (25mm) NPT on SS-120).Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable water side. The potable side of this unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance. The heat exchanger side of the unit may be used in space heating applications.
ModelNumber
AHRI Certified Water Heater Ratings
StandbyHeat Loss
Rating
°F/Hr.
ContinuousDraw
@135°F
Gal./Hr.
First HourDeliveryRating
Gal./Hr.SS-30-LSS-40-LSS-50-LSS-75-LSS-120-L
179237269367409
160209229307319
0.80.60.50.40.3
105,000135,000145,000193,000199,000
14.014.014.014.09.0
MinimumHeat
SourceFlow RateGal./Min.
MinimumHeat
RequiredRate
BTU/Hr.
ModelNumber
StandbyHeat Loss
Rating
°C/Hr.
ContinuousDraw
@57°C
Liters/Hr.
First HourDeliveryRating
Liters/Hr.SS-30-LSS-40-LSS-50-LSS-75-LSS-120-L
678897
101813891548
606791867
11621208
0.440.330.270.220.16
30.839.640.556.658.3
53.053.053.053.034.0
MinimumHeat
SourceFlow RateLiters/Min.
MinimumHeat
RequiredRate
kW/Hr.
Printed in U.S.A.556-E-0220
MODEL: SS-120-L
NOTE: These certified ratings were obtained with a heat source output and flow rate as specified and a 180°F (82°C) boiler water supply temperature. Other results will be obtained under different conditions.
B
C
A DG
HF
E
B
C
A DG
HF
E
MODELS: SS-30-L, SS-40-L, SS-50-L, SS-75-L
D/E
A
CG
HF
B
8"(203)
(mm)
HOT
AQUASTAT
COLD
D/E
A
CG
HF
B
8"(203)
(mm)
HOT
AQUASTAT
COLD
