Powering the International Security Industry ” · Email: [email protected] Maurice A.Cowan...
6
“ Powering the International Security Industry ” Power-Plex International @Power_Plex powerplexinternational Power-Plex Technologies International POWER-PLEX Technologies International Ltd, Unit 5, The Business Centre, Phase 3, Northwest Business Park, Ballycoolin, Dublin 15, Ireland. Tel: + 353 – 1 – 861 2277
Transcript of Powering the International Security Industry ” · Email: [email protected] Maurice A.Cowan...
“ Powering the International Security Industry ”
Power-Plex International @Power_Plex
powerplexinternational Power-Plex Technologies International
POWER-PLEX Technologies International Ltd, Unit 5, The Business Centre, Phase 3, Northwest Business Park,
Ballycoolin, Dublin 15, Ireland. Tel: + 353 – 1 – 861 2277
Richard Sheridan Sales Account Manager
Email: [email protected]
Maurice A.Cowan UK Sales Manager
Email: [email protected]
Adam OlkowiczTechnical Support
Email: [email protected]
Powerplex International designs. manufactures & assembles electronicpower supplies for the security industry. We have been the proud suppliers to the international security industry for over 25 years. These powersupplies are used as ‘stand alone sources to power such vital equipmentas cameras, access control systems, intruder and fire alarm systems.Our clients include recognised branded companies along with local SMEcustomers, distributors & wholesalers.
Contact Details: Contact Details: Contact Details:
NOTES
The ‘S’ RangeA range of eco-friendly
switch mode power supplies for Security Access and CCTV applications.
generate less heat, weigh less and perform to a Switch mode power supplies are more e�cient ,
higher level of reliability than linear PSU’s, thereby reducing maintenance costs.
• Range of models - 1.5, 3, 4, 5, 8, 12 and 15Amps
• Available in 12 and 24 Volt DC versions
The ‘ST ’ RangeA proven range of
general purpose DC Linear Power Supplies for use in the Security,
Fire and Associated Industries.
Own Branded by Numerous Major Security Companies Tried,Tested & Proven Since 1994
• Range of models - 1, 2, 5 & 8Amps• Available in 12 and 24 Volt DC versions
• Enhanced Version Available with Battery Deep Discharge Cut-off and Mains Fail Relay output
The ‘SMM ’ RangeAn extensive range of 12 Vdc switching power supplies
with high power and multiple fused outputs, competitively priced and primarily
intended for CCTV applications.
These models can be suppliedwith either PTC auto re-settable circuit breakers or traditional glass fuses, and are available in a variety of metal enclosures.
• Range of models - 5, 8, 10, 12 &16Amps• Available in 12 Volt DC versions• CE Compliant & LED Indication for fuse status
The ‘SX ’ RangeA powerful range of
Switch Mode Power Supplies for use in the Security, Fire & Associated Industries.
with stable voltage & consistent liability. Switch mode equals more power & less heat
• Range of models - 2.5,4,6 and 10Amps
• Available in 12 and 24 Volt DC versions
The ‘MT ’ RangeAn Advanced Range of Fully
Monitored Linear DC Power Supplies for use in the Security, Fire & Associated
Industries Compliant with EN.50131, Pt 6.
An Intelligent Microprocessor controlled power supply for professional installers.
• Range of models from 2 - 8Amps
• Available in 12 and 24 Volt DC versions
• Individual warning relay outputs for: AC Failure, Low Voltage, Fuse Blown & Battery Fault
The ‘AT ’ RangeAn Extensive Range of General Purpose
24 Vac Power Supplies
For Use in CCTV & Other Applications
• Range of models 5 and 10Amp
• Available in 12 and 24 Volt DC versions
• Multi Individual Fused Outputs 1,5, 10, 15, 20
Powerplex Baby Box Power-Plex has designed a smaller enclosure suitable for a
variety of system applications where a standby battery is not required.
Contact sales for further product speci�cations
‘Baby’ models are equipped with the following features:
Decal available in variety of di�erent languages.
Power-Plex manufactures and designs bespoke power supply units for di�erent clients. Our clients give Power-Plex di�erent speci�cations
and we provide a bespoke power supply unit, based on our customer needs.
Power-Plex also o�ers own brand decals for all our product range. This givesour customer a personalised power supply unit for installation.
All products available in above enclosures. Please contact sales for further information
Bespoke or Own Brand Decal Models
We have a wide range of measurements on all Steel Enclosures that we offer!
Steel Enclosure Measurements Steel Enclosure Measurements Steel Enclosure Measurements
Vertical = 335 x 225 x 85 mm Vertical = 335 x 225 x 85 mm Vertical = 335 x 225 x 85 mm Large = 300 x 400 x 110 mmLarge = 300 x 400 x 110 mmLarge = 300 x 400 x 110 mm
Compact = 225 x 200 x 90mm Compact = 225 x 200 x 90mm Compact = 225 x 200 x 90mm
