1

1 2 3

5

4

6

1 2 3

4

6

1 2 3

4

6

CV1205CV7205

CV7205B CV9605

CV9605G CV9605H CV9605P

V4805 V4805Y

V4806 V4807 V6005

Powerful Solutions TM

www.blackanddecker.co.uk

2

English (Original instructions) 6

3

8

7

5 9

1

1

2

3

A B

C D

E F

4

G

I

K

9

10

9

10

3

12 11

13

14

H

J

L

5

15

16

17

N.eps

M N

6

Intended useYour Black & Decker Dustbuster® hand held vacuum cleaner has been designed for light dry vacuum cleaning purposes.

Safety instructionsu Warning! When using battery-powered

appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.

u Read this manual carefully before using the appliance.

u The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

u Retain this manual for future reference.

Using your applianceu Do not use the appliance to pick up

liquids or any materials that could catch fire.

u Do not use the appliance near water. Do not immerse the appliance in water.

u Never pull the charger lead to disconnect the charger from the socket. Keep the charger lead away from heat, oil and sharp edges.

After useu Unplug the charger before cleaning

the charger or charging base.u When not in use, the appliance should

be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairsu Before use, check the appliance for

damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

u Do not use the appliance if any part is damaged or defective.

u Have any damaged or defective parts repaired or replaced by an authorised repair agent.

u Regularly check the charger lead for damage. Replace the charger if the lead is damaged or defective.

u Never attempt to remove or replace any parts other than those specified in this manual.

Residual risksAdditional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use, etc.

Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:u Injuries caused by touching any

rotating/moving parts.u Injuries caused when changing any

parts, blades or accessories.u Injuries caused by prolonged use of a

tool. When using any tool for prolonged periods ensure you take regular breaks.

u Impairment of hearing.u Health hazards caused by breathing

dust developed when using your tool (example: working with wood, especially oak, beech and MDF).

Safety of othersu This appliance is not intended for use

by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

u Children should be supervised to ensure that they do not play with the appliance.

Additional safety instructions for batteries and chargers

Batteriesu Never attempt to open for any reason.u Do not expose the battery to water.u Do not expose the battery to heat.u Do not store in locations where the

temperature may exceed 40 °C.

7

u Charge only at ambient temperatures between 10 °C and 40 °C.

u Charge only using the charger provided with the appliance/tool.

u When disposing of batteries, follow the instructions given in the section "Protecting the environment".

u Do not damage/deform the battery pack either by puncture or impact, as this may create a risk of injury and fire.

u Do not charge damaged batteries.u Under extreme conditions, battery

leakage may occur. When you notice liquid on the batteries, proceed as follows:

u Carefully wipe the liquid off using a cloth. Avoid skin contact.

u In case of skin or eye contact, follow the instructions below.

Warning! The battery fluid may cause personal injury or damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek medical attention.

ChargersYour charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a regular mains plug.u Use your Black & Decker charger

only to charge the battery in the appliance/tool with which it was supplied. Other batteries could burst, causing personal injury and damage.

u Never attempt to charge non-rechargeable batteries.

u If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

u Do not expose the charger to water.u Do not open the charger.u Do not probe the charger.u The appliance/tool/battery must be

placed in a well ventilated area when charging.

Electrical safetyYour charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate. Never attempt to replace the charger unit with a regular mains plug.

Symbols on the charger

# Your charger is double insulated; therefore no earth wire is required.

Fail safe isolating transformer. The mains supply is electrically separated from the transformer output.

The charger automatically shuts off if the ambient temperature becomes too high. As soon as the ambient temperature has decreased, the charger will resume operating.

$ The charger is intended for indoor use only.

Features 1. On/off switch 1. Two-speed on/off switch (CV1205) 2. Release button 3. Dust bowl 4. Charging base 5. Filter cleaning wheel (CV9605/

CV1205) 6. Charging indicator

Fig. A 7. Crevice tool 8. Brush tool

Installation

Fitting the charging base to the wall (fig. B)The charging base can be placed on a worktop or fitted to the wall to provide a convenient storage and charging point for the appliance.

8

Assembly

Fitting the accessories (fig. A & C)These models are supplied with the following accessories:u a crevice tool (7) for confined spacesu a brush tool (8) for furniture and stairs

To fit an accessory, proceed as follows:u Take the accessories from the

appliance.u Insert the appropriate accessory into

the front of the appliance.

Useu Before first use, the battery must be

charged for at least 24 hours.u Place the appliance on the charging

base whenever it is not in use.

Charging the battery (fig. B)u Make sure that the appliance is

switched off. The battery will not be charged with the on/off switch in the on position.

u Place the appliance on the charging base as shown.

u Plug in the charger. Switch on at the mains.

The charging indicator (6) will be lit.u Leave the appliance to charge for at

least 24 hours.Whilst charging, the charger may become warm. This is normal and does not indicate a problem. The appliance can be left connected to the charger indefinitely. The charging indicator will be lit as long as the appliance is connected to the plugged-in charger.

Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40 °C.

Switching on and off (fig. D)u To switch the appliance on, slide the

on/off switch (1) forward.u To switch the appliance off, slide the

on/off switch back.

CV1205/CV9605 - Optimising the suction force (fig. E)In order to keep the suction force optimised, the filter must be cleared regularly during use.u Rotate the wheel (5) a few turns to

shake out dust clogging the filter (9).

Cleaning and maintenanceWarning! Regularly clean the filters.

Cleaning the dust bowl and filters (fig. F - J)The filters are re-usable and should be cleaned regularly.u Press the release button (2) and

remove the dust bowl (3) (fig. F).u Empty the dust bowl (fig. G).u Remove the filters (9 & 10) by twisting

them clockwise (fig. H).u Brush any loose dust off the filters.u Wash the filters in warm, soapy water

(fig. I). The bowl can also be washed if necessary. Do not immerse the appliance in water (fig. J).

u Make sure the dust bowl and filters are dry.

u Refit the filters (9 & 10) onto the appliance, twisting them counterclockwise until they lock into place.

u Refit the dust bowl onto the appliance. Make sure the dust bowl clicks into place.

Warning! Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl.

CV1205/CV7205/CV9605 - Cleaning the exhaust filter (fig. K)u Open the lid (11).u Remove the filter (12) from the recess.u Wash the filter in warm, soapy water.u Make sure the filter is dry.u Refit the filter (12).u Close the lid.

9

Replacing the filtersThe filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (catalogue number: VF45 for CV9605H, catalogue number: VF40 for all other models).u Remove the old filters as described

above.u Fit the new filters as described above.

Protecting the environment

Z Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Battery (fig. L - N)

Z Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment.

If you want to dispose of the product yourself, the battery must be removed as described below and disposed of in accordance with local regulations.u Preferably discharge the battery by

operating the appliance until the motor stops.

The battery is located under the back end of the appliance.u Take the accessories from the appliance.u Remove the screws (13).u Unlock the tabs (14) holding the

accessory holder in place.u Remove the accessory holder (15).u Remove the screws (16) holding the

battery in place.u Slide the battery (17) backward as

shown.u Remove the battery.u Place the battery in a suitable

packaging to ensure that the terminals cannot be short-circuited.

u Take the battery to your service agent or a local recycling station.

Warning! Once removed, the battery cannot be refitted.

10

Technical data CV1205 H2 CV7205 H2 CV7205B H2Voltage V 12 7.2Weight kg 1.4 1.1

CV9605 H2 V4805 H2 CV9605G H2 V4805Y H2 CV9605H H2 V4806 H2 CV9605P H2 V4807 H2Voltage V 9.6 4.8Weight kg 1.3 0.9

Technical data V6005 H2Voltage V 6.0Weight kg 1.0

Charger **090020D **100015DModel V48 V60Input voltage VAC 230 230Output voltage VAC 9 10Amperage mA 200 150Approx. charging time h 24 24Weight kg 0.3 0.3

**110020D **140020DModel CV72 CV96Input voltage VAC 230 230Output voltage VAC 11 14Amperage mA 200 200Approx. charging time h 24 24Weight kg 0.3 0.3

CHA002014*Model CV12Input voltage VAC 100-240Output voltage VDC 7.2-24Amperage mA 85Approx. charging time h 24Weight kg 0.3

Level of sound pressure according to EN 60704-1:

Sound pressure (LpA) < 70 dB(A), uncertainty (K) 3 dB(A)

GuaranteeBlack & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:u The product has been used for trade,

professional or hire purposes;u The product has been subjected to

misuse or neglect;u The product has sustained damage

through foreign objects, substances or accidents;

u Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk

11

12

TYP.

ww

w.2

help

U.c

om05

- 01

- 10

E159

31

CV7

205(

B) -

V48

05(Y

) - V

4806

- V4

807

- V60

05Pa

rtia

l sup

port

- O

nly

part

s sh

own

avai

labl

eN

ur d

ie a

ufge

fuer

ten

teile

sin

d lie

ferb

arR

epar

atio

n pa

rtie

lle -

Seul

es le

s pi

eces

indi

quee

s so

nt d

ispo

nibl

esSu

ppor

to p

arzi

ale

- Son

o di

spon

ibili

sol

tant

o le

par

ti ev

iden

ziat

eSo

lo e

stan

dis

poni

bles

las

peiz

as li

stad

asSo

se

enco

ntra

m d

ispo

nive

is a

s pe

cas

lista

das

Ged

eelte

lijke

ond

erst

euni

ng -

alle

en d

e ge

toon

de o

nder

dele

n

zijn

bes

chik

baar

H2

1

10

6

7

8

20 21

TYP.

ww

w.2

help

U.c

om05

- 01

- 10

E159

30

CV9

605(

G)(H

)(P) -

CV1

205

Part

ial s

uppo

rt -

Onl

y pa

rts

show

n av

aila

ble

Nur

die

auf

gefu

erte

n te

ile s

ind

liefe

rbar

Rep

arat

ion

part

ielle

- Se

ules

les

piec

es in

diqu

ees

sont

dis

poni

bles

Supp

orto

par

zial

e - S

ono

disp

onib

ili s

olta

nto

le p

arti

evid

enzi

ate

Solo

est

an d

ispo

nibl

es la

s pe

izas

list

adas

So s

e en

cont

ram

dis

poni

veis

as

peca

s lis

tada

sG

edee

ltelij

ke o

nder

steu

ning

- al

leen

de

geto

onde

ond

erde

len

zi

jn b

esch

ikba

ar

H2

1

2 10

6

7

8

20 21

ENGLISH

Do not forget to register your product!www.blackanddecker.co.uk/productregistration

Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.

S/T-12/0990558404 REV 0

AustraliaBlack & Decker (Australia) Pty. Ltd. Tel. 03-8720 510020 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New ZealandBlack & Decker Tel. +64 9 259 11335 Te Apunga Place Fax +64 9 259 1122Mt WellingtonAuckland 1060

United KingdomBlack & Decker Tel. 01753 511234210 Bath Road Fax 01753 551155Slough, Berkshire SL1 3YD Helpline 01753 574277