Power Hub Basic A POWER HUB SERIES PRODUCT unit: inch [mm ...
Transcript of Power Hub Basic A POWER HUB SERIES PRODUCT unit: inch [mm ...
10.70271.9
10.32262.2
TOP VIEW
1.6040.5
4.86123.5
1.3033.1
1.2631.9 2.99
75.9
.9825
3.4687.9
2.0752.5
.6817.3
3.94100.1
.6817.3
1.7344
1.2030.5
1.2030.5
1.2030.5
BACK VIEW
DUAL, ANALOG 9-PIN D-SUB +RJ45 RS485 (FNET) MODULE CONNECTORSARE SHOWN IN THIS VIEW
ANALOG ONLY MODULE, 9-PIN D-SUB HAVESAME RELATIVE LOCATIONS OF D-SUBCONNECTORS AS SHOWN IN THIS VIEW.
11.82300.3
6.97177
2x1.86
(MODULE WIDTH)47.16.65
168.9
3.89
(TOUCH SCREEN)98.9
2.2757.8
2.3559.6
1.3834.9
RACK MOUNT
DESIGNED TO FITIN STANDARD 4U
ARE SOLD SEPARATELY
CONTACT SELLER IF RACK MOUNT ISREQUIRED, MOUNTING BRACKETS
FRONT VIEW
EnvironmentalWorking Temperature: 0 to 65 CelsiusWorking Humidity: 20 to 95% RH non-condensingStorage Temperature: -20 to 85 Celsius
Regulatory ComplianceCE Certi�edRoHS Compliant
Input Power Input Voltage Range: 100 - 240 VAC, auto ranging, IEC receptacleFrequency: 50 - 60 HzMaximum Current: 5 Amps, fuse protectedLeakage Current: Less than 1 mA at 240 VACPower Factor: > 0.95 at 230 VAC
User DisplayDisplay Type: Color TFT LCDColors: 65,536Display Size: 4.3 inch diagonal (53.9mm X 95mm)Viewing Angle: 130 degreesScreen Resolution: 480 x 272 (WQVGA)Display Brightness: 350 cd/m2
Contrast Ratio: 400:1User Interaction: Touch screen, resistive
Communications PortsType: RS232, local, DCE Connector: Female DB9Protocol: ASCII based commandsInteraction: See manual for command set
Expansion SlotsNumber: 2Maximum number of mass �ow devices: 8Supported combinations: 8 Analog or 8 Digital or 4 Analog + 4 DigitalModule Con�gurations: Any combination of two (control or control + logic)Compatible Module Types: Analog MFC, Digital MFC, and Logic I/O module
© 2012 Simplex Connect, All rights reserved
Power Hub Basic Electrical and Environmental Speci�cations
Austin Location 9701 Dessau Rd., Suite 605 Austin, Texas 78754 Tel: 512.539.4817 • Fax: 512.836.8054 www.horiba.com/powerhub
Available exclusively from:Due to continuous product improvements, all speci�cations are subject to change without notice.
19" Rack mount kit
Optional Accessories
Dimensions unit: inch [mm]
061112B1_HII
POWER HUBBASIC
A POWER HUB SERIES PRODUCT
Complex Connections, Made Simple....The Power Hub Basic simpli�es the complex and time consuming task of integrating multiple mass �ow devices and related control components. Mass Flow Controllers, Mass Flow Meters, Solenoid Valves, and similar devices can all be con�gured and controlled from a single intuitive interface. Different communication protocols whether analog or digital, are handled internally by the Power Hub and presented to the user in one format. The Simplex Connect Power Hub Basic along with its interchangeable modules give the user a true turn-key, plug and play solution.
View and Respond to Alarms• Alarms are prominently displayed on the Home Screen
• Alarms are displayed at the channel level for quick assessment
• Program any channel to trigger an alarm if �ow falls below or
rises above an alarm set point.
Single View Home Screen• Simple layout provides all vital information for each channel
• Color coded labels make it easy to read the status for each channel (Purge, Closed, On or off)
• User customizable channel labels mean no more look up tables or sticky notes
• Actual �ow is continuously displayed
Setup Automatic Logic for Alarms• With a Simplex Logic I/O module installed, High or Low alarms
can activate external devices such as buzzers, solenoids,
shut down devices, etc.
• Logic inputs can trigger events that activate MFC actions
Intuitive Setup Screen• Assign gas names or custom labels for each channel
• Set High and or Low alarms
• Purge, Close or Activate from one screen
• Single button control to switch between Mass Flow
Controllers and Mass Flow MetersOne: Insert modules of choice and
connect your devices
Remote CommunicationsThe Power Hub Basic includes an RS232 serial port for remote communication. A software package is available that includes remote control capabilities, data logging, and a software update utility.
If you prefer to write your own custom applications, the Power Hub Basic includes a complete ASCII command set. All local variables can be read or written remotely allowing users to create their own customized software for complete remote control.
Two:Con�gure scaling, alarms, and
logic control for each device
Three:Program MFC's set points
Four: Be productive, not frustrated with
complex setups, programming or
creating custom cabling
Typical System Examples
Control and/or monitor up to 8 mass �ow devices
Set up and Control a Complete System in 4 Simple Steps
Result: Low cost integration with flexibility and ease of use
Two 4-channel controller modules One controller module (base system)
SHOWN WITH TWO MODULES INSTALLED
SIMPLEXCONNECT
SIMPLEXCONNECT
SIMPLEXCONNECT
SHOWN WITH TWO MODULES INSTALLED
EXTERNAL ALARMS
SOLENOID ACTUATED ON-OFF VALVESRELAY OUTPUTS
DIGITAL INPUTS
ANALOG OR DIGITAL MFCs
EXTERNAL SWITCH
Control external devices or monitor switches and sensors with a Simplex Digital Logic I/O Card
PRESSURE SENSOR SWITCHES
One 4-channel controller module and one logic I/O module
SIMPLEXCONNECT
SIMPLEXCONNECT
SIMPLEXCONNECT
Control and monitor mass �ow controllers and mass �ow meters with Simplex Analog or Digital MFC controller modules
SEC-
N100
SEC-
N100
SEC-
N100
SEC-
N100
SEC-
N100
SEC-
N100
SEC-
N100
SEC-
N100
SIMPLEXCONNECT
SIMPLEXCONNECT