Powder Coat Brochure - Madden Manufacturing Coat... · 2021. 2. 4. · Powder coating gives...
Transcript of Powder Coat Brochure - Madden Manufacturing Coat... · 2021. 2. 4. · Powder coating gives...
Madden Metals Powder Coating
573-365-7040
Powder coating gives consumers and businesses one of the most economical, longest lasting and most color-durable quality finishes available on aluminum. Powder coated surfaces are more resistant to chipping, scratching, fading and wearing than other finishes.
Madden Metals Color Guide
Powder Coating Feature Benefit
Creates a thick dense finish on aluminum More durable and longer lasting than conventional painting
Typically, a one coat finish Application is quick and fairly easy
Powders can be expertly manipulated and blended Vast array of colors and textures available for custom and uniquely designed projects
Environmentally safe finish processCombination of recyclable aluminum and a non-toxic finish provides a best-in-class eco-friendly design element for your project
Cured powder creates an extremely even finish No visible drips or brush traces as with conventional painting
ClayPCTT28144
Charcoal Bronze PCTT70252
Copper VeinPCTT23100
Madden WhitePCTT88102
Silver VeinPCTT75422
Madden Hammered BlackPCTT99104
Available as Envirocron coatings (AAMA 2604) only
STOCK COLORS
Round 1.9" ADAHandrails only
Round 1.9" ADAHandrails only
Asset No.
QC �______ ______ Client�__________25 50 100
25
2
2 50 100
PMS.307 BLACK 2604 _Envirocron_UD_2013 REMAY 80553 (7607675536-B )
TRIM: 8.5 x 11 Digital/IAMBLEED: 8.75 x 11.25
SYSTEM OVERVIEW
COMMERCIAL USES
DURABILITY
PRODUCT DESCRIPTION
ENVIROCRON® 04 ultradurable
architectural powder coatings are
spray-applied systems which are
recommended for use in a variety
of architectural applications.
Based on thermosetting polyester
resin technology, they offer
building owners, architects and
specifiers a unique blend of
physical and chemical properties
with excellent resistance to
outdoor weathering.
ENVIROCRON 04 ultradurable
architectural powder coatings are
aesthetically pleasing and can be
custom formulated in a wide
range of color, gloss and effects.
These powder coatings are
designed to meet the physical test
requirements of AAMA1 2604
specifications.
P R O D U C T D ATA
ENVIROCRON® 04 ultradurable
architectural powder coatings offer
excellent color retention and chalk
resistance to meet demanding architectural
needs. Film hardness of H to 2H can be
achieved with ENVIROCRON 04
ultradurable powder coatings.
ENVIROCRON 04 ultradurable powder
coatings offer excellent aesthetics, resulting
in a smooth and beautiful finish and are a
complimentary product to PPG
ACRYNAR® liquid extrusion coatings.
ENVIROCRON 04 ultradurable
architectural powder coatings’
combination of improved mar resistance
and excellent weatherability make them
an excellent choice for use in high traffic
areas such as store fronts, schools,
hospitals, flag poles, high-rise
condominiums, and architectural accents.
ENVIROCRON 04 ultradurable
architectural powder coatings were
designed to meet the AAMA 2604
weathering specifications. For applications
requiring finishes that are easy to apply
and still offer improved long term
durability, our ultradurable powder
coating, ENVIROCRON 04 architectural
powder coatings are an excellent choice.
ENVIROCRON® 04POWDERCOATINGS
ACRYNAR, ENVIROCRON and the PPG logo are registered trademarks of PPG Industries Ohio, Inc.
Asset No.
QC �______ ______ Client�__________25 50 100
25
2
2 50 100
PMS.307 BLACK 2604 _Envirocron_UD_2013 REMAY 80553 (75536-B)
TRIM: 8.5 x 11 Digital/IAMBLEED: 8.75 x 11.25
P R O D U C T D ATA
Colors Available2 White, black, and a full range of solid and pearlescent colors
Dry Film ThicknessASTM D1400 2.5 mils ± 0.5
Apply 2 mils minimum
GlossASTM D523 @ 60° High, medium, & low gloss
Pencil HardnessASTM D3363 H – 2H
Cross Hatch Adhesion1/16” grid No removal
Direct Impact1/10” distortion No removal
Acid ResistanceASTM D1308 15 minutes – No attack10% muriatic acid spot test
Alkali ResistanceMortar pat test 24 hours – No attack100% relative humidity @ 100°F
Detergent Resistance3% immersion @ 100°F 72 hours – No attack
Salt Spray ResistanceASTM B117, 3000 hrs. Meets or exceeds 1/16" maximum undercutting5% NaCl @ 100°F
Humidity ResistanceASTM D714 Meets or exceeds specification of few # 8 blisters maximumASTM D2247, 3000 hrs.100% relative humidity @ 100°F
Exterior Exposure3
5 yrs. @ 45°, South FloridaASTM D3344 Maximum 5 fadeASTM D4214 Maximum 8 chalkFilm Integrity Very GoodGloss Retention Greater than 30%
ENVIROCRON 04 SPECIFICATIONS
ENVIROCRON® 04POWDERCOATINGS
PPG Industries, Inc.151 Colfax St.Springdale, PA 15144(800) 258-6398Fax: (724) 274-2600
www.ppgideascapes.comE-mail: [email protected]
6/13Printed in U.S.A.PPG-93
ENVIROCRON 04 WARRANTY INFORMATION
PPG offers a comprehensive warranty on ENVIROCRON 04 ultradurable extrusion powder coatings.For complete warranty information and a copy of the ENVIROCRON 04 ultradurable extrusionpowder coatings warranty, please call PPG at 1-800-258-6398.
1 American Architectural Manufacturers Association, Voluntary Specification, Performance Requirements and Test Proceduresfor High Performance Organic Coatings on Aluminum Extrusions and Panels. Publication No. AAMA 2604
2 The range of color availability will vary depending upon exposure requirements and architects’ specifications.3 While this coating has been formulated with the intent to meet the specifications in AAMA 2604, completed testing
regarding South Florida Weathering requirements does not exist for all colors.
The color chips in this brochure cannot be considered totally accurate color matches, and are not to be used as approved standards. This document contains general information only and should not be construed as creating any warranties, express or implied. Please contact a PPG representative for additional information.
Coraflon, Envirocron, the PPG Logo and PPG TrueFinish are registered trademarks We protect and beautify the world is a trademark of PPG Industries Ohio, Inc. The Twitter Logo is a registered trademark of Twitter, Inc. The IN Logo is a registered trademark of LinkedIn Corporation. ©2019 PPG Industries, Inc. All rights reserved. 07/19
The powder coating process
573-365-7040
1. Part preparationAlso known as pretreatment, this essential process removes oil, dirt, lubrication greases, metal oxides, welding scale and other impurities prior to the powder coating process.
2. Powder applicationThe most common way of applying powder coating to metal objects is to spray the powder using an electrostatic gun.
3. CuringThe cure process requires a certain temperature for a certain length of time in order to reach full cure and establish the film properties for which the material was designed.
PPG TRUEFINISH® • One PPG Place, Pittsburgh, PA 15272 • 1.866.PPG.TRUE • ppgtruefinish.com