POURNAMI TOOLS Burr off Tools. POURNAMI TOOLS POURNAMI TOOLS is on the business of manufacturing...
-
Upload
silvester-wells -
Category
Documents
-
view
218 -
download
4
Transcript of POURNAMI TOOLS Burr off Tools. POURNAMI TOOLS POURNAMI TOOLS is on the business of manufacturing...
POURNAMI TOOLS
Burr off Tools
POURNAMI TOOLS
• POURNAMI TOOLS is on the business of manufacturing fine / finishing tools for the past 15 years
• Located in Chettiyarpatti, an industrial hub in South India, PT has good access to engineering brains and skilled man power
• Managed by technocrats, PT has specialized in offering custom made solutions directly to end users / OEMs
POURNAMI TOOLS
ISO 9001:2008 certified
For
Design Manufacture Supply
Quality Policy PT respects and implements quality at every level: Material Machines People Procedures
POURNAMI TOOLS
Having produced customized solutions all these years, PT wants to serve the market as a whole across industries with a highly engineered standard unique tool:
With that is born the tool with innumerable benefits and features, the
Burr Off Tool
POURNAMI TOOLSBurr Off Tool
More features
• Burr Off Tools can deburr both side of a punched ,drilled or reamed hole in one operation.
• Eliminate multiple set-ups and increasing efficiency.
• Integral cutting edges prevent obstruction by chips and debris.
• Custom profile can be made to your specification which includes options for countersinking or single side deburring.
POURNAMI TOOLSBurr Off Tool
More features
• Special Coating such as TiN,TiALN,TiCN are available to increase tool life and cutting efficiency in certain Materials.
• Uncoated tools typically deburr 3000 to 5000 holes before requiring reconditioning
• In many cases ,coating may double or triple this amount.
POURNAMI TOOLSBurr Off Tool
1 2 3
3 Simple Steps for Burr-off Working Principle.
1. The Burr on the front side bore gets removed while the tool integral cutting edges removed.
2. While entering inside the bore, the design of the tool head Without damaging the inner surface, even in the bore at 1Ra.
3.The Component rear side get deburred while coming back.
POURNAMI TOOLSBurr Off Tool
Note: The ratio of the main bore and the cross hole should not be less than 2:1
POURNAMI TOOLSBurr Off Tool
General advantages• Applicable for all types of industries
• Low cost of tool as compared to the benefit
• Achievement of high accuracy
• Higher productivity and lower cycle time resulting in huge
savings .
• Suitable for mass,batch production or small series
• Can be performed by unskilled operator
POURNAMI TOOLSBurr Off Tool
S.No Deburring dia(in mm)
Spindle Speed (RPM)
1 4.0 - 5.0 10002 5.1 - 6.0 8303 6.1 - 8.0 8304 9.0 - 11.0 6505 12.0 - 15.0 6006 16.0 - 19.0 4207 20.0 - 24.0 3508 25.0 - 28.0 2509 29.0 - 32.0 250
10 33.0 - 38.0 12011 39.0 - 50.0 12012 51.0 - 70.0 120
Cutting Parameters
Feed Rate: Similar to HSS Drills
The above given speed and feed may vary according to the component material.
POURNAMI TOOLSBurr Off Tool
POURNAMI TOOLS
Address: 32A/15, Karmega Nadar, Chettiyarpatti – 626 122Virudhunagar District, Tamilnadu, INDIA
Contact : Sales departmentMail : [email protected] : +91 95855 32152 / + 91 99947 32602
[email protected]. pournamitools.in
@ PT we Do More
PT