7/22/2019 PotPlayer Guide

1/1

PotPlayer guide: [OUTDATED]

Installers:PotPlayer(x86):

http://www.dvbsupport.net/download/index.php?act=view&id=230madVR: http://madshi.net/madVR.zip

LAV Filters: http://files.1f0.de/lavf/LAVFilters-0.52.exeHaali Media Splitter: http://haali.su/mkv/MatroskaSplitter.exexy-VSFilter: http://xy-vsfilter.googlecode.com/files/xy-

VSFilter_3.0.0.65_Installer.exe

Installation:Install Potplayer and Haali with the default settings.Install Lav filters and uncheck anything that you don't need (x64 and the

audio if using ffdshow)Extract madVR and run install.bat as an administrator.Install xy-VSFilter.

PotPlayer Setup:

Start PotPlayer and go to options (F5):Filter Control:Source/Splitter: Set Damage AVI and Damage ASF to 'Built-in'Source/Splitter: Set Matroska to '*Haali Media Splitter'Source/Splitter: Set everything else to '*LAV Splitter Source'Video Decoder: Set everything to '*LAV Video Decoder'Audio Decoder: Set everything to '*ffdshow Audio Decoder' or '*LAV

Audio Decoder' depending on preferenceCustom filter manager>add external filter>add xy-VSFilter.dll

Video:Set Video renderer to 'Madshi Video Renderer'

Audio:Set audio renderer to output DirectSound

madVR Setup:Play a Video file and right click on the madVR tray icon to access it's

settings page 'Edit madvr Settings...'Devices:name of monitor/TV:properties:

Set RGB output to 0-255 and bit depth to 8-bit or higherDisplay Modes:

add any refresh rates that your monitor supports.e.g '1080p23, 1080p24, 1080p25, 1080p29, 1080p30, 1080p50,

1080p59, 1080p60'check 'restore original display mode when media player

closes'

processing:decoding:

uncheck everything

Hardware Acceleration:To enable hw acceleration goto 'LAV Video Configuration' (can be

found in the start menu)Select the appropriate hardware decoder e.g 'NVIDIA CUVID'Set the algorithm to 'Adaptive' and the mode to 'Video'Check 'High-Quality Processing'