Post2
-
Upload
divine-villarosa-valledor -
Category
Documents
-
view
6 -
download
0
description
Transcript of Post2
This program create a Log in System that loads different forms for every user type
and if the user type "admin" then the form2 will load, then if the user type
"staff" the form3 will load
POST #2
Submitted By: Divine V. Valledor
IT3B1
Step 3. Select Visual C# and then select Windows Forms Application after that click ok
Edit the name
Of your project
here into log in system
Step 4. Create a Form1 like this As your first form.
Select a control that you want to edit
Its properties
Step 5.Add two forms as your Form2 and Form3. just right click the highlighted word logInSystem, then select Add after that select Windows form
and then just enter and no need to rename.To Add form3 just do it again the instruction in step 2.
1st
2nd
3rd
Step 6.design your Form2 and Form3 just like this.Form2 is almost the same as Form3 except the
label1, just renamethe label1 in Form3 to "User:Staff" the rest is the
same.
Step 7.Here's the coding portion, double click the button1 in Form1.
then copy or type the code below:
then copy the code below:
Step 8.Here's the second coding portion, double click the button1 or log in button in
Form2
Step 9.the same coding instruction in step 5,double click the button1 in Form3 then copy the code below:
Step 10. F5 to run the program and the output is look like this.
username: admin password: admin
or
Username: staff password: staff
Output