portfolio 2012
-
Upload
alessandro-madami -
Category
Documents
-
view
219 -
download
2
description
Transcript of portfolio 2012
1
# 0 point.
Alessandro MadamiPortfolio 2012
2
3
About me & Porfolio
4
About me
PERSONAL DETAILS
Name Alessandro Madami
Adress
Via Tartini N°2820158 Milano,(MI)
Nationality
Italian
Date of birth
10.01.1984
Telephone
(+39) 349-1460672
EDUCATION
2010/2012 Specialization/ Master degree in Product design at Politecnico of Milan
2007/2010
Graduated at the Architecture Universityof Florence in Industrial design.Degree mark: 105/110.
2001/2007
High school :Professional diploma astour operator
Untill 1994
Until 1994 attending KG and primary classes at international English language schools in Saudi Arabia and Hong Kong.
SKILLS
Languages English:Fluent in written andspoken English (ETS Toeflscore: 70) Spanish basic.
Software
Rhinoceros
Vray
Adobe PhotoshopAdobe IllustratorAdobe Indesign
Autocad.
5
“Designing a product is designing a relationship.”Steve Rogers
6
7
Portfolio
8
Index
_Product Design _Interior Design _Visual design
0.1 Eco-Sound-Trash
0.2 Bamboo
0.3 Concentrica
0.4 Cavalletta
10-15
16-21
22-27
28-31
1.1 kiTchen
1.2 Switch
2.1
2.2
9
PRODUCTDESIGN
10
0.1EcoSound-TrashRecycle BinTeam project.
Description
ECOSOUNDTRASH is a system of modular stack containers designed to provide separate wastecollection. The modules emit a series of birds chirping, each time one is introducing waste through thecollar, by means of a self-powered solar device concealed inside the containers. Each individual modulehas also been designed to be be utilized as a seat or a table.
Year
Material
Processing
With
Inquisitiveness
2010
Alluminium sheet
Laser cut
University of Florence
This project was initially thought to be realized in plastic by injection molding in order to have a smoothershape, but after due consideration to the production cost involved, it was finally decided to create it inalluminium sheet.
687.83
180
140
282
42
72
350
510
420
42
77
223
526
148 14853
350
11
12
13
14
_B
ECOSOUNDTRASH.
15
Multifuntional Product
Eco Sound Trash has been designed in such ashape in order that it may be turned into a stoolor a coffee table, according to needs. Being atrash bin for dry waste like paper, plastic andaluminium there are no problems with odors andhygiene.The EST has on its top a lid covered withalcantara material to be as comfortable aspossible when used as a seat (fig. A ). On theside of the bin there is an handhold to facilitatethe lifting of the lid / seat.(fig.B )The three branches, that are all at the sameheight and are designed to withstand a certainweight, can be used as a stand for a plexigas topwhen transforming the EST into a coffeetable.(fig.C)
_A
_C
16
0.2BambooHouse Lamp
Team Project.
Description
Bamboo is a lamp designed starting from a 3mm thick sheet of PMMA 384x790. How one can easilyimagine our source of inspiration was the bamboo plant. Featuring fascinating properties, this plant iscomposed of cylindrical surfaces alternating with structural nodes. The same pattern was intended torecur in our project where the nodes are represented by the dishes that are so shaped as to hold intension the entire area of coverage.
Year
Material
Processing
With
Course
2011
Polymethacrylate
Laser cut
Politecnico of Milano
Sviluppo prodotto
39.32°
R2.00
31.0
0
R2.02
24.34
15.88
0.30
15.99
52.8
7
14.38
R28.55
R2.00
R2.10
R0.50
R0.13
R0.25
19.38
4.01
17
18
Cutting geometry.
Sizing
Our goal from the beginning was to design a lamp consisting of few parts and is therefore easy to assemble but still with an impact “important” on the environment. This was the choice that immediately led us to avoid techniques such as slicing or other methods of structur-ing “conventional” that surely would have taken a lot of material, so we would penalize the size of the final result. For this reason we have chosen to bend the material.A choice that has quickly turned into a design challenge because we had very few certainties about the possibility of ending the plate without heating.
The tracking we see is what allows our plate bending 180 °. We tested the dimensionally on a prototype of which we see an enlargement
Following tests, corrections and calculations were able to get the desired result. We have removed by laser cutting the material in the bending zone so to facilitate the material to bend.And ‘really interesting as a material such as PMMA is able to bend by 180 ° without the use of heat sources. It is even more fascinating as the tension created by the plate bending contributes structurally fixed bearing in the joints and nodes.Yes, as fascinating as the bamboo.
19
20
BAMBOO
21
22
0.3Concentricakitchen scale
Team Project.
Description
Concentric is a simple kitchen scale. Few pieces, some snap and you’re done.It is in fact a scale that due to its geometry want to simply repeat those complex mechanisms that normally reside in the household scales.
The heart of the Project is the plate made of harmonic steel shaped by laser. The coupling between the cutting geometry and elasticity of the material causes to the center of the shaped plate to go down if loaded and lathes if downloaded just like a spring.
Year
Material
Processing
With
Course
2011
WoodHarmonic steel
Laser cut
Politecnico ofMilano
Sviluppo Prodotto
_Laser cut machine _Harmonic steel after laser cut
23
Geometry We made different cutting tests with regard to the plate. The geometry that we eventuallyselected (blue), is the one that best meets our needs. Since there is no mathematical formula to calculatethe forces acting on that plan, we had decideded to proceed by empirical tests. The calibration that wehave achieved was just satisfactory and we are confident that by a series of additional tests we will be ableto get the optimal result.
24
Assembly
1
2
3
CASE(wood version) turning, milling
(steel version) laser cutting, bending, welding.
CAPThermoforming - ABS 3 mmpressure fixing
GUIDEinjection molding - ABS 3 mm
25
4
5
6
INDICATOR
laser cutting and bending - stainless steel 1mmfixed by bending the ring around the guide
HARMONIC STEELLaser cutting - steel wire 0.3 mmis fixed with four screws
CONTAINERThermoforming - ABS 3 mm
26
CONCENTRICA
27
28
0.4GrasshopperBookshelf.
Team Project.
Description
The starting point of this project, as often happens, was a common technology: the bending of a tube /rod of metal. Fascinating and simple technology that allows you to create complex geometry products intime and at low costs. According to this logic we thought about the module. The module is oftensomething complex that, thanks to his characteristic, offers a variety of combinations. After a brief searchof what the market was offering, we decided that our challenge was to create a modular library. Webelieve that the library is an object that, before any other requirements, has to be adaptable to the needsof users. These were the guidelines that have given birth to Grasshopper, i.e. an extensible library inheight and width thanks to one single module.
Year
Material
Processing
With
Corso
2011
WoodSteel rod
Bending rod
Politecnico of Milano
Product Development
29
Details
Geometry
The geometry of the module has been designedto favor the stackability, thereby reducingthe overall dimensions even during transport.The flaring of the modules also serves toconcentrate load inward avoidingups and unwanted as a support for books.
The product has been designed so as to betotally screwless. The stands are supportedat the base above the pins and remain inposition by gravity. The shelves fit into“channels” created by rods, which span theaxis linking him. Each part of the shelvescan be used. The modules havedimensions studied adequately to allow theinsertion of a variety of objects inside.
30
GRASSHOPPER
31
32
33
INTERIORDESIGNINTERIORDESIGN
34
1.1kiTchenCompact kitchen
Team Project.
Description
Concept
The brief of the progect was to design a kitchen that could fit in a not very big spaces maintening all the function of a normal sized kitchen. So we then started our brainstorming and resarch on what already existed. Thinking about our kitchen concept adhering to the brief, we decided first of all to ensure that the kitchen area and the lounge room should somehow interact with each other, so we started from the fact that the kitchen should be off grid. Hence our first proposal at the conceptual level is the one below.
The design concept is a small kitchen withincorporated a dining table and a sink latchmade of silicone material. It is a kitchenstudied for single people, young couple or aworker, i.e. people that don’t cook often, butwhen they want have got everythingessential to do it.
Year
Material
Processing
With
Course
2009
WoodSteel rod
Bending rod
Politecnico diMilano. Effeti cucine.
Product Development
35
kiTchen.
Side
Perspective
From concept we then passed to the actual project and focused on details in terms of form and function.Being a kitchen which stands at the center of the room,it is designed to ensure that the kitchen could beseen only at times of use and may disappear soon after; so the decision was to make a cock up and downwith a concrete top that can cover the entire area( cook-top-sink-support area.)
36
Render
37
38
1.2SwitchCompact table-food store
Team Project.
Description
“Switch” is a food-store that can switched just by an hand into different forms to interact with your house.
Year
Material
Processing
With
Course
2009
WoodSteel
Università di architettura Firenze. Effeti cucine.
Product Development
39
Switch
Concept
Front 1
Front 2
Perspective
40
41
VISUALDESIGN
42
2.1Graphicsmy own pleasure.
Individual project.
Indaco name written with a 3d modeling program.
Year 2008
43
44
# the end.