Portable Closed Circuit Impactor/Screen Plant CRH1113R
Transcript of Portable Closed Circuit Impactor/Screen Plant CRH1113R
Portable Closed CircuitImpactor/Screen Plant
CRH1113R
A world working better™
Cedarapids® Portable Plants
CRH1113R Closed Circuit Impactor/Screen Plant
The CRH1113R portable closed circuit impactor/
screen plant features the TI4250 impact crusher and
a 6x16 2-deck inclined screen. The crusher is hydraulic
clutch driven direct from a 450hp Scania diesel. All
other components are electric driven from the 150kw
generator. With its large screen, wide conveyors, and low
maintenance electric driven components, this is a high
production, high value plant.
Standard Features
• TI4250 impact crusher
• 6’ x 16’ 2-deck screen
• 450 hp T4F Scania Diesel with hydraulic clutch
crusher/generator drive
• 150 kW generator
• 48” x 18’ vibrating grizzly feeder with 6’ stepped
2-deck grizzly
• 24” reversible conveyors can feed both screen decks
to return conveyor
• Gas powered hydraulic leveling jacks & screen lift
• Removable CCM automatic switchgear panel
• Travel: 11’-11” wide, 13’-11” tall, 4-axle suspension
48” x 18’ long VGF provides large hopper
for large loaders
Convertible 6’ grizzly uses sloped punch plate or stepped grizzly bars
One piece tow provides a portable crushing and
screening solution
50” wide TI4250 impact crusher
Hydraulics provide quick and easy set-up
Low maintenance electric components and easy maintenance access
Large capacity 6’x16’ adjustable dual slope
2-deck screen
Return 1 or 2 decks to crusher for maximum
screening capacity
450 hp engine & 150 kW generator with hood scoop filter
option
Working Dimensions - Standard
Estimated Weights Kingpin Axle Tag Total Hopper
Quad axle plant* 54,939 78,546 133,485
Quad axle plant with hopper module removed* 53,416 58,901 112,317 21,168
Optional 3+1 axle plant* 57,986 59,207 19,725 136,918
*All weights include select options: 24” dirt conveyor, run-on jacks, magnet, hood scoop, walkways, pan feeder
Transport Dimensions - Standard
13’-9”Feeder Hopper Height
13’-11”Transport
Height
4’ Kingpin
3°
6’11’-4”13’-2”14’-1”
75’-11”
60’-5”
33’-3”
11”
4’-10”4’-10”4’-10”
6’-6”Axle Track
8’-6”Tire Contact Width
11’-11”Travel Width
13’-11”Transport
Height
4’-10”4’-10”4’-10”
13’-9”Feeder Hopper Height
75’-11”
33’-3”
18’-10”Operation
Height
74’-4”
10’-6”Fines
Discharge Height 5’
4’-5” 14’-1” 33’-3”
11”
17’-11” 4’-9” 3’-5” 6’-9”Beam Centers
3’-10”
6’-8”Opt Dirt Conv
Discharge Height
Adjustable Screen Top Deck 18° - 22°
(Shown at 20°)
Adjustable Screen Bottom Deck 16° - 20°
(Shown at 18°)18’-6”
14’-8”
74’-4”
TI4250 Imperial Metric
Maximum feed size* (cube size)
20” 500 mm
Maximum feed size*(recycle slab)
10” x 32” x 32”
250 x 800 x 800 m
Feed opening (feeder discharge)
47” wide x 25.5” high
1190 x 650 mm
Adjustment of aprons Hydraulic assist
Overload protection Hydraulic
*Pending feed material characteristics and blowbar metallurgy
Power Requirements hp kW
Impactor (all electric only) 300 225
Screen 20 15
VGF 25 21
Return conveyor 7.5 5.6
Cross conveyors, reversing 2 x 5 2 x 3.7
Fines conveyor 10
Grizzly reject conveyor (optional) 5 3.7
Self-cleaning magnet (optional) 2 1.5
Hydraulic power unit 2 1.5
Undercrusher pan feeder (optional)
2 x 3 2 x 2.2
Remove tag for operation
6’-9”Beam Centers
18’-7”
19’-6” 14’-1”33’-3”
76’
4’-5”
18’-10”Operation
Height
11’-4”
58’-9”6’
11’-11”Travel Width
13’-11”Transport
Height
8’-6”Tire Contact Width
6’-6”Axle Track
11” 4’-10” 14’-1”4’-10”
13’-9”
10”
October 2021. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment.
Failure to follow the appropriate Operator’s Manual when using our equipment or failure to act responsibly may result in serious injury or death.
The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale, and Terex makes no other warranty, express or implied. Terex, the Terex Crown design, Cedarapids, Canica, Simplicity, Jaques, El-Jay and Rollercone are trademarks of Terex Corporation or its subsidiaries. All rights are reserved. © 2021
www.terexmps.com
Working Dimensions - Optional 3+1 axle configuration
Transport Dimensions - Optional 3+1 axle configuration
Optional Equipment
• 48” x 144” VM Series pan feeder and double deck
pre-screen (replaces standard VGF)
• Undercrusher pan feeder
• Off-plant starters & radio remote
• Screen platforms & ladder
• Dual pinned hydraulic run-on jacks
• Economical self-cleaning cross belt permanent
magnet, mid plant
• Rolling grizzly reject conveyor with 6’ discharge
• Various grizzly options for bar spacing, punch plate, &
2nd deck wire
• All electric (no diesel)