Portable - Analox Military Systems STAN 59-411 Part 3 Annex B US DOD: Mil Std 464A US DoD: Mil Std...
2
concept sheet Technology Analox MEC intelligent electrochemical oxygen sensor Analox 5S3 intelligent NDIR sensor Analox MEC intelligent PID sensor Analox MEC intelligent electrochemical sensor Water vapour sensor using capacitive technology Measurement Range Accuracy Oxygen 0 to 50% ±(0.035% O2 + 1% of reading + 0.15% of reading/ºC) Carbon 0 to 1000ppm ±(25ppm CO2 + 1% of reading + 1ppm CO2/ºC) dioxide VOC 0 to 100ppm ±(1ppm VOC + 5% of reading + 0.25% of reading/ºC) Carbon 0 to 20ppm ±(1ppm CO + 5% of reading + 0.1ppm CO/ºC + 0.5% of reading/ºC) monoxide Water 0 to 100mg/m 3 ±(0.15mg/m 3 H2O + 20% of reading) vapour The ACG is built upon Analox's latest innovations in sensor technology. The new range of 5S3 and MEC intelligent sensors are Analox's most compact, miniaturised range of sensors to date. Each sensor comes with its own electronics for signal processing and temperature compensation which enables each sensor to become a field replaceable item. Portable
Transcript of Portable - Analox Military Systems STAN 59-411 Part 3 Annex B US DOD: Mil Std 464A US DoD: Mil Std...
concept sheet
Technology
Analox MEC intelligentelectrochemical oxygensensor
Analox 5S3 intelligentNDIR sensor
Analox MEC intelligentPID sensor
Analox MEC intelligentelectrochemical sensor
Water vapour sensorusing capacitivetechnology
Measurement Range Accuracy
Oxygen 0 to 50% ±(0.035% O2 + 1% of reading + 0.15% of reading/ºC)
Carbon 0 to 1000ppm ±(25ppm CO2 + 1% of reading + 1ppm CO2/ºC)dioxide
VOC 0 to 100ppm ±(1ppm VOC + 5% of reading + 0.25% of reading/ºC)
Carbon 0 to 20ppm ±(1ppm CO + 5% of reading + 0.1ppm CO/ºC + 0.5% of reading/ºC)monoxide
Water 0 to 100mg/m3 ±(0.15mg/m3 H2O + 20% of reading)vapour
The ACG is built upon Analox'slatest innovations in sensortechnology. The new range of 5S3and MEC intelligent sensors areAnalox's most compact,miniaturised range of sensors todate. Each sensor comes with itsown electronics for signalprocessing and temperaturecompensation which enables eachsensor to become a fieldreplaceable item.
Portable
The following standards have been identified as theminimum standards that should be achieved forEMC field environment for both AC and DC powersources.
UK MOD:DEF STAN 59-411 Part 3 Annex B
US DOD:Mil Std 464A
US DoD:Mil Std 1399 Section 070
Shock and impact:MOD UK Shockrequirement are as follows;
The system is required to meet BR3021 mediumweight shock standards as per NATO STANAG4141 tested in accordance with NES814.
US Military standards:MIL STD-810G Sect 522.1
Analox has a policy of continuous improvement and we reservethe right to upgrade or change specifications without prior notice.Full technical specifications are available upon request.
15 Ellerbeck Court,Stokesley Business Park,North Yorkshire, UK.TS9 5PT.T: +44 (0)1642 711400F: +44 (0)1642 713900W: analox.net Ref 01/12
concept sheet
Power:Input voltage: 24V DCPower consumption: 24 W (max)
Optional power supply:Universal mains adaptor;Input: 95 to 250VAC, 50/60Hz
Sensor response time:T90 < 120 secsT90 < 15 mins (water vapour sensor)
Flow rate:5LPM (max)
Inlet pressure:4 to 7 bar gauge
Operating temperature:-5˚C to 50˚C
Storage temperature:-10˚C to 60˚C
Humidity:0 to 99% RH (non condensing)
Environmental protection rating:IP54
Outputs:1x Normally open relay contacts1x Normally closed relay contacts3x 24V DC switched output
Portable
