Port of Hastings Handbook and Harbour Masters Directions ... · Port of Hastings Operating Handbook...
Transcript of Port of Hastings Handbook and Harbour Masters Directions ... · Port of Hastings Operating Handbook...
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 1 of 61
Port of Hastings Operating Handbook
&
Harbour Master’s Directions
July 2014 Edition
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 2 of 61
AMENDMENT NOTIFICATION FORM
Suggested amendments:
Page Details
…….. …………………………………………………………………………… …….. …………………………………………………………………………… …….. …………………………………………………………………………… …….. ……………………………………………………………………………
Forward by mail to;
Captain Shane Vedamuttu
Harbour Master
Patrick Ports Hastings
PO Box 204 CRIB POINT
VICTORIA 3919
E-mail. [email protected]
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 3 of 61
1.0 Port of Hastings - Overview 05 1.1 Preamble 05 1.2 Victorian Regional Channels Authority 08 1.3 The Harbour Master 09 1.4 Shipping Control & Communications 10 1.5 Vessel Operations Generally 11 1.6 Port Administration Procedures 13 2.0 Port Information 14 2.1 Port management 14 2.2 Channel Description 14 2.3 Tides and Tidal Information 15 2.4 Harbour Control 15 2.5 Pilotage 16 2.6 Navel Gunnery Range 16 2.7 Berth Particulars 17 3.0 Harbour Master’s Directions 20 3.1 Definitions 20 3.2 General Requirements 21 3.3 Anchoring & Mooring 23 3.4 Navigation within Port Waters 26 3.5 Approaches to Port Waters 28 3.6 Vessels engaged in Diving Activities 28 3.7 Small Vessels 29 4.0 Safety & Environmental Requirement 30 4.1 Environmental protection 30 4.2 Port of Hastings requirements 30 4.3 Dangerous Goods 31 4.4 Entry into confined spaces/cargo tanks 37 4.5 Hot work on ships 37 4.6 Hull cleaning 38 4.7 Waste discharge & garbage 39 4.8 Immobilisation of main engines 39 4.9 Discharging flares, rockets & explosives 39 4.10 Vessels engaged in diving operations 40 4.11 Application for regattas, boat races etc 40
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 4 of 61
5.0 Emergency Management Procedures 41 5.1 Marine Incidents 41 5.2 Western Port Emergency Management Plan 41 5.3 Reporting of Incident in Port Waters (other than pollution) 42 5.4 Marine Pollution 43 5.5 Emergency Contact Numbers 44 6.0 PORT SECURITY 45 6.1 Information and obligations 45 6.2 Port Security Officer 45 6.3 Harbour Master 46 6.4 Port Security Committee 46 6.5 Responsibilities 46 6.6 Levels of Security Alert 47 6.7 Notification of Security Alert Level 47 6.8 Declarations of Security 47 6.9 Ship Security Certificates 48 6.10 Restricted Zones 48 6.11 Reporting of Security Breaches or Suspicious Behaviour 48 7.0 APPENDICIES 49 Appendix 1 Key Contact Details 49 Appendix 2 Chartlets 50 Appendix 3 Hastings Harbour Control Procedures 55
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 5 of 61
1.0 PORT OF HASTINGS OVERVIEW
1.1 PREAMBLE
1.1.1 General Description
The Commercial Port of Hastings is situated in the North Arm of Western Port, a large inlet
named by explorers George Bass and Matthew Flinders in 1798 as the most “Westward
Harbour” discovered during their voyage from Sydney. Western Port is more commonly
referenced as being 70 km South East of Melbourne.
There are two large islands within Western Port; the larger to the north is French Island with
Phillip Island to seaward. The Western Entrance is the main entrance and the only entrance
suitable for commercial shipping having a least depth of 14.9 m. The Eastern Entrance is
narrow, shallow and suitable only for small Vessels with local knowledge.
Height of tide within the commercial port varies, typically 2.1m at neap tides to 3.4m at
springs.
The port facilities namely:-
Stony Point Jetty, Crib Point Jetty and Long Island Point Jetty are owned by the State of
Victoria through the Port of Hastings Development Authority.
The Steelworks Jetties and the land adjoining are owned by BlueScope Steel.
The land adjoining the State owned jetties is Crown land vested in the Port of Hastings
Development Authority
The Port Waters are the responsibility of the Victorian Regional Channels Authority (VRCA)
On the 1st July 1997 the State of Victoria through the Port of Melbourne Authority awarded a
Port Management Agreement to TNT Australia Pty Ltd., a subsidiary of KPN, a Dutch postal
company. This included a Channel Operating Agreement with the Victorian Channels
Authority and a Lease agreement on the adjoining Crown Lands for ten years with two five
year options.
On the 1st December 1997 KPN sold TNT Logistics to TOLL Holdings. The Port of Hastings
management company, TNT WesternPort was part of TNT Logistics and became TOLL
WesternPort, a part of the Ports Division of TOLL Logistics. In 2006 Toll Holdings Ltd
acquired PATRICKS and in June 2007 Toll Holdings Ltd split into two separate companies;
ASCIANO was set up to encompass all the infrastructure businesses including the ports. This
entailed a name change from Toll WesternPort to Patrick Ports Hastings.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 6 of 61
1.1.2 About this Handbook
This Handbook is intended to provide information and guidance to Ships’ Masters,
Agents and Owners to facilitate the safe and efficient operation of shipping within the
Port Waters of the Port of Hastings. The details are correct at the time of publication
but may be subject to variation, it has been compiled as a guide only and should not be
regarded as a comprehensive coverage of or a substitute for appropriate Acts and
Regulations
It provides Port Information on anchorages, channels and berths, tidal information as
well as port services details and contacts for the Port of Hastings.
It also provides Harbour Master’s Directions for the navigation and operation of
Vessels in Port Waters. A section on Safety and Environmental Requirements to be
complied with by Vessels in Port Waters and emergency management procedures are
also covered.
1.1.3 Revisions & Updates
It is the responsibility of persons using this Handbook to ensure that they refer to the
latest edition of this Handbook which can be obtained from Hastings Harbour Control
or downloaded the Patrick website: http://asciano.com.au/patrick/ports
It is also the responsibility of persons using this Handbook to ensure they also refer to
any relevant “Notices to Mariners” which are available on the Victorian Regional
Channels Authority website www.regionalchannels.vic.gov.au
1.1.4 Disclaimer
PATRICK PORTS HASTINGS (PPH) shall not in any way be or become responsible in
law or otherwise to any third party whomsoever for any consequences of any errors in
or omissions from this Handbook of whatsoever nature and howsoever occurring nor
shall PPH be liable or responsible for any third parties reliance upon any information
compiled by PPH and contained in this Handbook.
The information provided in no way whatsoever supersedes or detracts from that
available in Admiralty Charts or publications, RAN Hydrographic Charts,
Commonwealth or State Acts, ordinances, rules or regulations, or from publications of
other relevant organisations, both public and private, and should thus be read not only
in conjunction with but also subject to such material, documents and publications.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 7 of 61
1.1.5 Abbreviations
AMSA: Australian Maritime Safety Authority
AQIS: Australian Quarantine & Inspection Service
COLREGS: Convention on the International Regulations for Preventing Collisions
at Sea
DHM: Duty Harbour Master.
DTPLI: Department of Transport, Planning and Local Infrastructure
HHC: Hastings Harbour Control
MARPOL: The International Convention for the Prevention of Pollution from
Ships
TSV: Transport Safety Victoria
PMA Port Management Agreement
PPH Patrick Ports Hastings
PPSP: Port Phillip Sea Pilots
UKC: Under Keel Clearance
VRCA: Victorian Regional Channels Authority
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 8 of 61
1.2 The Victorian Regional Channels Authority
1.2.3 Role & Responsibility
The Victorian Regional Channels Authority (VRCA) was established under the Port
Services Act 1995 (PSA) in April 2004 to manage Victoria’s regional channels. Its main
objective is to ensure that Port Waters and channels in Port Waters are managed for use
on a fair and reasonable basis. It is responsible for the commercial navigation channels
in the Port Waters of Geelong, Portland and Hastings. Its primary functions are:
• Shipping Control
• Provision of Navigation Aids
• Dredging of Channels
• Marine Environment Protection and Safety.
The VRCA has a Channel Operating Agreement as a Schedule to the Port Management
Agreement between The Port of Hastings Development Authority and Patrick Ports
Hastings. The Channel Operating Agreement delegates the roles and responsibilities the
VRCA has under the Port Services Act for the Port Waters of the Port of Hastings to
Patrick Ports Hastings
1.2.4 Jurisdiction
This Handbook applies to the Port Waters and associated assets of the Port of Hastings.
(See Appendix 3)
1.2.5 Mission Statement
The Mission of Patrick Ports Hastings is to manage shipping channels and their use in
a safe, fair, reasonable and commercial basis.
In pursuit of its mission, Patrick Ports Hastings will:
• Maintain the safety and efficiency of shipping channels that are their responsibility
• Provide a quality service to its customers at a reasonable charge
• Manage all assets and liabilities under its control on a prudent basis
• Fulfil its obligations under the Port Operating Agreement to manage the Port,
provide port services, and provide oil spill response capability as directed by the
Department of Transport, Planning and Local Infrastructure (DTPLI)
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 9 of 61
1.3 THE HARBOUR MASTER
1.3.1 Appointment
Transport Safety Victoria is empowered under the Marine Safety Act, as amended, to
licence Harbour Masters and determine standards for the training of Harbour Masters.
Pursuant to the PSA, the Port Operator must appoint a licensed Harbour Master.
1.3.2 Powers to Direct
The general powers of a Harbour Master are provided under the Marine Safety Act.
In summary, a Harbour Master may give directions in respect of:
• The time and manner in which a Vessel may enter or leave Port Waters
• The navigation and movement within those waters
• The position and manner of anchoring or securing a Vessel in Port Waters
• The time and manner of taking or discharging cargo, stores, fuel, fresh water or
ballast
• The securing or removing of a Vessel within those waters
• The prohibition from entry into or the removal from Port Waters of a Vessel in
imminent danger of sinking.
• Any other matter that affects the safety of navigation within Port Waters
Harbour Master’s Directions given in respect of the Port Waters of Hastings are
contained in Section 3 of this Handbook, but may be revised, amended or altered from
time to time at the sole discretion of the Harbour Master.
1.3.3 Other Powers
In addition to giving Directions a Harbour Master may:-
• Board and cause a Vessel to be dealt with as required by the Harbour Master
• Authorise a person approved by TSV to exercise the Harbour Master’s functions
• It is an offence to fail to comply with a direction of or to obstruct a Harbour Master
when he is carrying out his duties.
1.3.4 Assistant Harbour Master
Patrick Ports Hastings may, having first-
(a) Consulted the Harbour Master engaged by that body, and
(b) Obtained the approval in writing of the Director of TSV
Authorise, in writing, a person to act as an assistant Harbour Master for the waters that
have been so declared to be part of the Port.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 10 of 61
1.4 SHIPPING CONTROL & COMMUNICATIONS
1.4.1 Communication & Control
The Duty Harbour Master (DHM) who is authorised to exercise the functions of the
Harbour Master is in charge of all of Harbour Control functions and is accountable
directly to the Harbour Master.
The prime function of the DHM is to facilitate the safe, efficient movement of shipping
within Port Waters, including all necessary coordination of port services, dissemination
of relevant information, to ensure that a continual program of shipping movements can
be affected to the advantage of all commercial shipping in an impartial manner.
Hastings Harbour Control is manned on an as required basis as directed by the Harbour
Master. VHF Channel 14 is usually monitored by the DHM/Harbour Control as follows.
� One hour prior to ETA at the Pilot Boarding Ground until safely
berthed or at anchor.
� 30 minutes prior to ETD from a berth until safely anchored or departed
Port Waters.
� One hour prior to ETD from an anchorage until safely berthed or
departed Port Waters.
A VHF listening watch is not usually maintained by Harbour Control except as listed
above. However, the Harbour Control Office may be manned at the discretion of the
Harbour Master. This may be, but not limited to, times of inclement weather, i.e. fog or
during periods of high winds, when critical tidal information is required by a Vessel or
during an emergency.
Note The DHM must be contacted by mobile telephone 0428 549 235 (Prior to
09:00 Hours & 16:00 as required – See 1.53 below) for all shipping orders in
relation to Pilots, Tugs, Linesmen, linesboats and any other shipping services
requirements.
The DHM is contactable 24 hours a day on a mobile phone which reverts to a
paging service when the phone is engaged, out of range or turned off while the
DHM is on a tanker berth.
1.4.2 Communication Frequencies
Radio Telephone VHF (International Channels).
(a) Channel 14 156.700 MHz Calling and Port Working Frequency
(b) Channel 08 156.400 MHz Pilots and Tugs
(c) Channel 16 156.800 MHz Safety
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 11 of 61
1.5 VESSEL OPERATIONS GENERALLY
1.5.1 General Requirements for Vessels
(a) All Vessels entering the Port Waters must comply with relevant International,
National and State legislation/regulation/direction. All vessels using the Port
must also comply with the Harbour Masters Directions and follow the
practice of good seamanship.
(b) The Master and Owner of any vessel entering Western Port must comply with
all of the requirements outlined in the ‘Port Standards & Procedures” and the
“Port Operations Handbook” which include the Harbour Masters Directions.
These can be downloaded from the Patrick Ports Hastings website. All users of
Western Port are reminded that the breaking of any Direction made by the
Harbour Master is an offence under Victorian Legislation.
(c) The Master and Owner of any vessel entering Western Port must not interfere
with, come into contact with, approach or cause any damage to any
Navigational Aid, or structure associated with the safe Navigation of Vessels
in Western Port.
(d) No person or vessel is to interfere with the safe navigation of a vessel within
Western Port and it is forbidden to approach or pass under a vessel in Western
Port without the permission of the Master of that vessel.
(e) No person or vessel is allowed to pass under any of the jetties in Western Port
without the permission of the Harbour Master.
(f) The Master and Owner of a Vessel within the Port must ensure that the Vessel
does not come within 100 metres of any tanker terminal or Vessel at a tanker
terminal unless permission is obtained by the Harbour Master to do so.
(g) The Master and Owner of a Vessel shall ensure that the speed of a Vessel is at
all times commensurate with safe navigation.
(h) If a vessel berthed at Western Port becomes unberthed due to force majeure,
the Master of the vessel is to ensure that the vessel is anchored a safe location
as soon as practicable. After such an event, on no account is the vessel to be
moved from the anchorage or brought back alongside any berth in Western
Port without the permission of the Harbour Master
(i) The Master and Owner of a Vessel shall ensure that navigation within the Port
is carried out in compliance with all directions given by the Harbour Master.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 12 of 61
1.5.2 Compliance with Provision of Handbook
The Master and the Owner of the Vessel, and where applicable, the ship’s agent, are
jointly and severally responsible for the due performance of and compliance with the
requirements set out in this Handbook, the “Port Standards & Procedures” and
compliance with all relevant laws, regulations, rules and directions applicable to
Western Port.
When a Vessel is under the direction of a Pilot, the pilot is responsible for the due
performance of and compliance with the provisions of this Handbook. However, the
engagement of a Pilot does not relieve the Master and the Owner of the Vessel of their
responsibilities. The ultimate command, and thus responsibility, for the safe navigation
of a Vessel remains with the Master of the Vessel.
1.5.3 Order of Priority
It is the responsibility of the DHM to optimise the programming of all movements and
available services, to the best advantage of commercial shipping. Orders for ship
services are finalised prior to 09:00 hours for Vessel movements between 13:00 hours
and 19:00 hours on that day and prior to 16:00 hours for Vessel movements between
19:00 hours on that day and 13:00 hours the next day. The DHM has the authority to
exercise discretion on these matters particularly in an emergency or in abnormal
circumstances. As far as is possible in such circumstances consultation will be
maintained with affected parties. Priorities for vessel movements are below.
(a) Any ship which is in an emergency situation shall have priority of
movement and services over all others.
(b) In general, a ship ready to move takes priority over a ship which is not ready
(c) Any ship whose movement is governed by tidal or navigational conditions.
(d) A ship that is ready to depart or ship that is occupying a berth of another
ship that has labour waiting.
(e) Inward ships have priority in order of readiness, which have been cleared by
Quarantine and have labour waiting.
1.5.4 Pilotage & Exemptions
The Master of a Vessel that is required to carry a Pilot when navigating within Western
Port must not cause or permit the Vessel to be navigated within Port Waters unless the
Vessel is under the direction of a Pilot duly licensed by Transport Safety Victoria or the
Master holds a valid certificate of exemption from Pilotage issued by Transport Safety
Victoria. The Master of a Vessel must, if pilot exempt, ensure a white flag is displayed
where it can best be seen whilst entering or leaving Port Waters during daylight hours.
1.5.5 Use of Tugs & Line Launches
While there are no criteria or prescribed requirements for the use of tugs or line
launches in Western Port, it is the responsibility of Owners, Masters and Pilots, in
consultation with the Harbour Master, to ensure that Vessels under their control are
manoeuvred safely and to avail themselves of towage and launch services of sufficient
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 13 of 61
capacity to manoeuvre the Vessel under prevailing conditions. Any concern or question
relating to the use of tugs or line launches must be referred to the Harbour Master for
direction. Adverse weather forecasts, storm surges or other exceptional circumstances
may cause the Harbour Master to require a “standby tug” to be made available while a
vessel is in port. Irrespective of circumstance, the cost of such a tug will be the
responsibility of the vessel which the tug is put on standby for.
1.5.6 Assistance to be given to the DHM
The Master of a Vessel which is within Port Waters must by every means consistent
with the safety of the Vessel, assist the DHM in boarding or leaving the Vessel in the
execution of his or her duties including the supply of information and documents
regarding the status of the Vessel. No person on board the Vessel may interfere with or
obstruct the DHM whilst carrying out his or her duties.
1.5.7 Quarantine Report
Vessels arriving from overseas must submit a Quarantine Declaration for Vessels form
to the Australian Quarantine and Inspection Service (AQIS) prior to the Vessels arrival
in Port Waters. If a Certificate of Vessel Quarantine Clearance is issued by AQIS the
Vessel may proceed direct to her berth. If a Vessel has not received clearance, the
Master is to inform Hastings Harbour Control of this and not enter Port Waters until
clearance is obtained from Harbour Control.
If there is a death or illness on board of an unknown cause or any other reason which
requires the Vessel to be quarantined, then a Non-granting of Vessel Quarantine
Clearance is issued, the Vessel will proceed to quarantine anchorage and await
inspection before establishing other communication and will fly the appropriate flag
signal until Vessel Quarantine Clearance is obtained.
Vessels must declare if they intend to discharge ballast water into Australian waters.
Written permission must be granted by AQIS (for Vessels arriving from overseas) or
the EPA (for domestic trade) before discharge may commence. All Vessels discharging
ballast will be subject to a ballast water verification audit and must produce logbooks
on request to an Authorised Quarantine Officer. For further details on ballast water
management requirements refer to Section 4.7.
1.5.8 Australian Customs Service
(1) Masters are reminded that all crew leaving the Vessel in Australia must carry
valid personal identification.
(2) Masters are to ensure that all Australian Customs Service documents required to
be produced to Customs have been submitted.
(3) The Australian Customs Service will check a number of your certificates for
currency on behalf of other government agencies.
(4) The removal of any goods from Vessels including alcohol and tobacco is
prohibited unless the goods have Customs clearance(s). This also applies to ships
equipment and fittings going for “repair and return” in Australia, these also
require prior Customs clearance(s).
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 14 of 61
1.6 PORT ADMINISTRATION PROCEDURES
1.6.1 Appointment of Ship’s Agent
Prior to entering Port Waters, the owner of a Vessel must, unless PPH otherwise agrees
in writing, appoint an agent for the Vessel. The agent must be authorised to act on
behalf of the owner in all matters relating to the Vessel while it is in Port Waters.
1.6.2 Flying National Colours
The Master of a Vessel of 200 gross tons or more must ensure the Vessel flies its
national colours between sunrise and sunset whilst within Port Waters.
1.6.3 Port Documentation Requirements
The following Port of Hastings documentation is required to be used in the
appropriate circumstances;
• Application for Channel & Berth Form
• Dangerous Goods Permit Form
• Notification to Convey or Handle Bulk Liquid or Bulk Dangerous Cargo
Form
• Notification to Convey or Handle Dangerous Substances Form
• Permit to undertake Repairs to Vessel Form (which includes
immobilisation requests, hull cleaning, etc.)
• Tanker Declaration Form (Note that tankers must have the H2S levels their
cargo compartments below 100 PPM prior to entering Western Port)
• Aquatic Events Advice
This website also contains the “Port Operations Handbook” and the “Port
Standards and Procedures” which must be adhered to by all Port users.
All documents mentioned on this page are available on Patrick Ports Hastings
website at; http://asciano.com.au/patrick/ports
Note: The website is updated on a regular basis. Users must check that they downloaded
the latest edition each time they refer to the documentation mentioned on this page.
All applications must be lodged with Harbour Control by email to:
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 15 of 61
2.0 PORT INFORMATION
2.1 Port Management
The Port of Hastings Waters, Long Island Point, Crib Point and Stony Point Jetties are
managed by Patrick Ports Hastings.
• Steel Wharf Nos 1 & 2 are owned and managed by BlueScope Steel
• Long Island Point Jetty is operated by Esso Australia
• Crib Point Jetty is operated by United Terminals
• Stony Point is operated by Patrick Ports Hastings
2.2 Channel Description
The commercial shipping channels are marked by buoys and beacons IALA SYSTEM A.
Reference Charts Aus 150, Aus 151 and Aus 152.
The Western Entrance buoyed channel has a minimum width of 400 metres and a swept
clearance of 14.9 metres. It is a two way traffic channel.
The main channel in the North Arm has a maintained depth of 14.3 metres and a width of 180
metres between Hanns Inlet and Crib Point Jetty swing basin (between Nos.19 and 23 buoys);
and a width of 245 metres between Crib Point Jetty and Long Island Point Jetty swing basins
(between Nos.25 and 29 buoys). It is a one way traffic channel.
The secondary channel in the North Arm to the East of the main channel has a least depth of
10 meters. It is marked on the East side by piles along the 10 meter contour adjacent to
Middle Spit.
The swing basins at Long Island Point Jetty & Crib Point Jetty have a maintained depth of
14.3 metres with berth pockets of 15.8 metres (350 metres long 90 metres wide).
The channel north of Long Island Jetty swing basin has a maintained depth of 9.1 metres and
a width of 200 metres. It leads to the swing basin off the Steel wharves which has a
maintained depth of 9.1 metres. The berth pockets at both steel wharfs have depths of 12.1
metres and are 290 metres long and 30 metres wide.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 16 of 61
2.3 Tides and Tidal Information
The height of tide within the commercial port varies from 2.1m at neap tides to 3.4m at
springs. Tides can be considerably higher or lower than predicted. Tidal currents of up to 3
knots are usually experienced at the berths and up to 4 knots in the fairways, the ebb
generally being stronger than the flood. Currents at the berths and in the fairways may be
higher than stated above, depending on meteorological conditions and storm surges.
Chart Datum
Chart datum is the datum for soundings on the latest edition of the largest scale Australian or
Admiralty Chart of a locality. This is generally based on a local determination of lowest
predicted tide. There is often a different Chart Datum for each port. Chart Datum used in
Victoria is at or near the Lowest Astronomical Tide (LAT). Extremes in meteorological
conditions influence tidal levels and on some occasions the tide level falls below LAT,
though this is infrequent.
Chart Datum is referenced to local benchmarks and they can be related to the Australian
Height Datum which is based on a determination of mean sea level at a number of tide gauge
stations around the coast of the Australian continent.
Weather Effects
The water level and tidal streams in Western Port are greatly affected by barometric pressure
and by the direction and duration of the winds in the Bass Strait.
NOTE - Tidal heights may vary by more than half a metre above or below prediction
and may be more than an hour on either side of predicted times.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 17 of 61
2.4 Harbour Control
Hastings Harbour Control is located at Stony Point. Lat 38o22'31" S. Long 145o13'21" E. An
as required radio watch is kept on VHF Channels 16 (156.80 Mhz) and 14 (156.70 Mhz) All
port operations are directed through Hastings Harbour Control. Vessels underway or at
anchor within the port should maintain a continuous listening watch on VHF Channel 14
(156.70 Mhz) and 16 (156.80 Mhz) DHM/Harbour Control is contactable on mobile phone
0428 549 235 at all times. The working channel for the Pilots and Tugs during berthing
operations is VHF Channel 08 (156.400 MHz)
Note - See Appendix 3 for Hastings Harbour Control Rules
2.5 Pilotage
Pilots are licensed by Transport Safety Victoria (TSV). Pilotage is compulsory for all
commercial ships exceeding 35m length except those who’s Master is specifically exempt
from Pilotage. Pilots for Western Port are available on a 24 hour basis. ETA must be given
not less than 48 hours prior to ship's arrival.
Pilot Boarding Ground
Ships will normally embark their Pilot at the outer Pilot boarding ground, in position
approximate 38º 32.7’ S, 145º 01.8’ E, from a launch showing the signals and lights
prescribed for a pilot launch. That is, by DAY approximately 3.5 miles 180o from West
Head. By NIGHT in the white sector of McHaffie's Point Light, with Cape Schanck light
bearing 295o (white).
Alternative Pilot Boarding Ground - Flinders Bight
An alternate Boarding Ground for use by ships of up to 9.75 m draught is situated east of
Flinders Jetty in position approximate 37º 28.3’ S, 145º 04.6 E. A yellow buoy showing a
yellow light flashing every 4 seconds (flash 1 second, eclipse 3 seconds) marks its centre.
Note: Vessels are NOT to use this alternate Pilot boarding ground unless directed by
Hastings Harbour Control or the Pilot.
2.6 Naval Gunnery Range (AREAS R.312A and R.312B)
A Naval Gunnery Range is situated south and west of West Head, and active 0930 to 1500
(local time) on weekdays. Area R.312B is the area used for surface gunnery practice.
Vessels entering or leaving the Port should keep out of Area R.312B.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 18 of 61
2.7 BERTH PARTICULARS
2.7.1 Crib Point Jetty (2 berths)
Approach channel has depth of 14.3m with 15.8 metres alongside at No 1 Jetty and 12.0
metres at No 2 Jetty. The berths were constructed in 1965 as the marine terminal for the
former Western Port Refinery which ceased operations in 1986. No 1 Crib Point jetty
continued as a crude oil loading facility until 1989 when this activity ceased. Between 1989
and 1995 the berths were not used other than for occasional shipping requiring repair and lay
up facilities. During 1996 refurbishment work was completed for the import of motor spirit
and white oils through No 1 Crib Point in tankers of up to 100,000 DWT. No 2 Crib Point
berth is decommissioned awaiting development opportunities.
Crib Point No.1 (CP1)
Berth is State owned and utilised by United Australia for the discharge of motor spirit and
automotive diesel to their terminal in Hastings. Discharge is through flexible hoses to a
300mm pipeline fitted with booster pump. The hose string is supported by ships gear. A
shore gangway is available which rests on ships rail.
Hose Strings: 3 x 10" (10:20:40 feet)
Discharge Line: 1 x 12" (300mm)
Fresh Water: Not Available
Bunkers: Not Available
Dirty Ballast Reception: Not Available
Crib Point No.2 (CP2) (Repair Berth)
Berth is State owned and decommissioned awaiting future developments.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 19 of 61
2.7.2 Long Island Point (LIP) (1 berth)
Berth is State-owned and utilised by Esso Australia Ltd. The approach channel has a depth of
14.3 m. The swing basin has a diameter of 548m and a depth of 14.3m. There is 15.8 m
alongside the berth. Berth used for export of Gippsland Crude Oil and LPG on tankers of up
to 100,000 DWT (see information relating to acceptance of large tankers into Western Port).
Shore gangway used.
Hose and pipeline diameters: (All metal Chiksan arms used instead of Hoses).
Crude: 2 x 16" (400mm) 1 x 12" (300mm) diameter
loading/ballast arms numbered from South: 8:7:6:
2 x 30" (760mm) diameter pipelines
Maximum height of manifold 16 metres
Max pumping rate 7,000 TPH
LPG 5 x 12" (300mm) diameter loading/vapour arms 5:4:3:1:
1 x 20" (500mm) diameter refrigerated pipeline
1 x 12" (300mm) dia vapour pipeline
Max pumping rate, refrigerated product 1400 TPH
Maximum height of manifold 21 metres
Max pumping rate, pressure product 45 TPH
1 x 8" (200mm) diameter loading arm for refrigerated and pressure LPG No 2
Arm is also fitted with a 4" (100mm) vapour return line
Reducers 6" (150mm), 8" (200mm), 10" (250mm) and 12" (300mm)
150/300 ASA
Loading arms connected by Esso
Fresh Water Limited quantity Available on request
Bunkers Not available
Dirty Ballast Facilities Not Available
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 20 of 61
2.7.3 BlueScope steel Wharves (2 berths)
Berths are owned by BlueScope Steel. The approach channel has depth of 9.1m. Depth
alongside both berths is 12.0m. Swing basin diameter 457m. (see chartlets Appendix 2)
Steel Wharf No.1 (SW1)
Ro-Ro berth. Ships up to 16,000 DWT with a starboard quarter ramp
Concrete landing pad ashore appropriate for a quarter ramp of 10 metres width, 50
metres length overall and angled at approximately 31o to ship's centre line.
Stern of Vessel approximately 17 metres off ramp for stern door Vessels.
Steel Wharf No.2 (SW2)
Conventional general cargo wharf 152m long, 24 to 15.6m wide. Reinforced concrete
wharf with wooden fendering. A mooring dolphin is provided 30 metres northeast.
No.2 berth is adjacent & extends in a N.E. direction from No.1 berth. Maximum size
of ship up to 190 meters LOA & 50,000 DWT.
Note: Vessels wanting to berth at the BlueScope steel Wharves must get
permission from BlueScope Steel to use these wharves in addition to all
other Port entry requirements.
2.7.4 Stony Point Jetty (SPJ)
This wharf is 190 m long and 6.5m wide. Concrete and timber construction with
wooden fendering. Depth of water alongside 2.5m at southern end and 6.0m at
northern end. (see chartlet Appendix 2)
The wharf is used by Harbour service craft including two Tugs, Passenger Ferries and
small commercial Vessels up to 70m in length. Defence Maritime Services have their
RAN contracted training Vessel “Seahorse Spirit” based at Stony Point Jetty.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 21 of 61
3.0 HARBOUR MASTER’S DIRECTIONS
These “Harbour Master’s Directions” are made by Capt. Paul Shane Vedamuttu being the
Licensed Harbour Master for the Port Waters of the Port of Hastings.
These directions are amended, varied and further directions made from time to time. Set
out below are the Harbour Master’s Directions in force as at the date of publication of
this Handbook. Users of Western Port must make their own enquires as to any further
amended or varied directions in force from time to time.
3.1 DEFINITIONS
• “Berthed Vessel” means a Vessel secured to a wharf, jetty or pier or to another berthed
Vessel.
• “Channel” or “Fairway” means that part of the body of water within the Port Waters of
Hastings of sufficient depth to be used by “Vessels of Commerce” for navigation that is
either marked with Navigation aids or an open water area that connects with the marked
channel or channel approaches.
• “Gas Free”; a tank, compartment or container is gas free when sufficient fresh air has been
introduced into it to lower the level of any flammable, toxic, or inert gas to that required for
a specific purpose, eg: hot work, entry, etc. Gas freeing will be carried out to the relevant
Australian and International standards and certified by a competent person.
• “Gross Under keel Clearance” means the difference between the dynamic draught of a
Vessel and the declared depth of the seabed it is traversing.
• “Hampered Vessel” means a Vessel restricted in her ability to manoeuvre and has the same
meaning as a hampered vessel as defined in the International Regulations for Preventing
Collisions at Sea.
• “Harbour Master” includes a person authorised by a Licensed Harbour Master to exercise the
functions of the Harbour Master.
• “Licensed Harbour Master” means a Harbour Master licensed by Transport Safety Victoria
for the Port Waters of the Port of Hastings.
• “Master” means a person having command or charge of a Vessel.
• “Port Waters” has the same meaning as waters in Western Port as declared under the Port
Services Act.
• “Ship” where appearing in these directions or in referenced publications shall where the
context permits have the same meaning as Vessel.
• “Tanker” means a Vessel constructed or adapted for the carriage of liquid Cargo or gas in
bulk (including oil, chemicals or liquefied gas)
• “Vessel” means any kind of Vessel that is used, or capable of being used, in navigation by
water, however propelled or moved, and includes, but is not limited to;
(1). A barge, lighter, floating restaurant or other floating Vessel; and
(2). An air-cushion vehicle or similar craft that is used for navigation by water.
(3). Aircraft capable of manoeuvring on the water, for as long as the aircraft is on the water.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 22 of 61
3.2 GENERAL REQUIREMENTS
3.2.1 Applications
These directions apply to all Vessels within Western Port, other than as provided in
Section 3.7
3.2.2 Compliance with other Acts, Regulations and Provisions
The Master of a Vessel shall ensure that the Vessel, while in Port Waters,
(1) Complies, insofar as they are not inconsistent with these specific directions, with the
International Regulations for Preventing Collisions at Sea and with all rules and regulations
relating to the waters of Western Port.
(2) Displays the signals prescribed under the International Code of Signals;
(3) Carries copies of and complies with:
(i) Victorian Notices to Mariners (or their equivalent) affecting Port Waters
(ii) Corrected to date charts Aus 150, Aus 151 and Aus 152 ,
(iii) Australian National Tide tables or Victorian Tide Tables; and
(iv) The Australian Pilot Vol. II (NP 14)
(v) Have access to AMSA Marine Orders
3.2.3 Seaworthiness
(1) Where the Master of a Vessel becomes aware of any condition or circumstance relevant to
the seaworthiness of the Vessel that may impact upon the safe navigation of the Vessel, or
any other Vessel in Port Waters, or which may in any way affect the day to day operations or
environment of the Port Waters; the Master shall immediately notify the Harbour Master.
Note - Notifying the Harbour Master of unseaworthiness does not relieve the Master of his
obligations under the State Marine Act and Commonwealth Navigation Act
(2) The Master of a Vessel seeking permission to enter Port Waters under the circumstances
described in 3.2.3 (1) above shall give notice to the Harbour Master of the nature of the
vessels deficiency as early as practicable prior to entering Port Waters and not enter Port
Waters until permission is granted to do so by the Harbour Master.
(3) To ensure manoeuvrability is maintained, the Master of a Vessel, while in Western Port,
shall ensure that:
(a) The Vessel’s propellers & rudder are immersed sufficiently to ensure control.
(b) The bow is deep enough to provide adequate vision from the bridge.
(c) The Vessel’s anchors are unlashed and ready for letting go.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 23 of 61
3.2.4 VHF Listening Watch
The Master of a Vessel shall ensure that at all times that a Vessel is underway or at anchor
within Western Port, a listening watch is maintained on VHF Channels 14 and 16.
3.2.5 Sound Signals
The Master of a Vessel shall ensure that the sound signals required by the International
Regulations for Preventing Collisions at Sea are adhered to, and, if appropriate for the
purpose of warning another Vessel, ensure that the following sound signals are made in
relation to swinging in a fairway or narrow channel:
(a) If the Vessel is proceeding up or down a fairway or channel:
(i) When the Vessel is at least 500 meters distant from the point at which it
intends to swing, a warning signal consisting of four short blasts on the whistle
(ii) Immediately prior to the commencement of swinging, a repeat of the sound
signals described in (a) (i) and also, after a short interval, the international
signal to indicate the movement of the Vessel’s head or engines going astern.
(iii) Immediately prior to departing the Main Channel to the east or west the
appropriate sound signal required by the Col. Regs.
(b) When the Vessel is a tug towing another Vessel not under power, the sound signals
described in paragraph (a) shall be made on the tug.
(c) When the Vessel is leaving a berth to swing at a point in the fairway or channel at a
distance of less than 500 metres from the berth, the sound signals described in (a) (i)
shall be given immediately on letting go.
Note. Masters should keep a sharp lookout for recreational Vessels and give the appropriate
warning in plenty of time
3.2.6 Incidents in Western Port
The following requirements relate to Masters, Owners or Agents of Vessels that have sunk,
stranded or collided within Western Port and Owners of objects that obstruct Port Waters.
(a) If a Vessel sinks or strands within Port Waters or if any object impedes the
navigation or use of Port Waters, the Master, owner or agent of the Vessel and the
owner of the object by which the obstruction is caused, shall immediately:
(i) Notify the Harbour Master of the position of the obstruction, and
(ii) Take the necessary steps for removal of the obstruction.
(a) If a collision takes place causing damage to any Vessel, wharf or property within port
waters, or if a Vessel strands or sinks within Port Waters, the Master of every Vessel
involved shall immediately:
(i) Report the circumstances to the Harbour Master, and
(ii) As soon as possible, confirm the report in writing to the Harbour Master.
Note - For information regarding reporting of incidents in Port Waters refer to the Emergency
Management Procedures section of this Handbook.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 24 of 61
3.3 ANCHORING & MOORING
3.3.1 Vessels to be properly anchored
(1) The Master of a Vessel proceeding to anchor is required to ensure that sufficient water is
available for safe anchoring at the intended anchor position and its surrounds.
(2) The Master of a Vessel at anchor shall ensure that at all times the Vessel is properly and
effectively anchored.
(3) The Master of a Vessel at anchor in Port Waters shall not cause or permit the Vessel to
change its position without permission from the Harbour Master
(4) If a Vessel parts from its anchor, or drags from its anchoring position, the Master of the
Vessel shall immediately notify the Harbour Master of that event.
(5) The Master of a Vessel anchored in Port Waters shall ensure that:-
(a) The Vessel is anchored in a position that will permit the Vessel to swing clear of the
channels and fairways;
(b) There is sufficient cable out considering the holding ground and the prevailing and
forecast weather conditions;
(c) When the Vessel is “brought up” the Master shall advise the time and position of
anchoring to Hastings Harbour Control.
(d) A listening watch is maintained on VHF Channel 14 and 16 for relevant navigation
information including weather bulletins.
(e) The safety and security of the vessel is maintained at all times
(6) The Master of a Vessel at anchor in Port Waters shall not permit the immobilisation of main
engines without prior permission of the Harbour Master.
(7) Vessels anchoring in the designated anchorage areas in Western Port must report the time of
anchoring and their anchor position to Hastings Harbour Control
3.3.2 Vessels not to Anchor in Certain Locations
(1) The Master of a Vessel shall ensure that an anchor is not dropped in a position which may
endanger the safety of the Vessel or of other Vessels.
(2) The Master of a Vessel shall not cause or permit the Vessel to be anchored or lie at a
distance of less than 200 metres from any wharf except for the purpose of swinging the
Vessel or immediately hauling alongside that wharf.
3.3.3 Watch to be on Deck
The Master, owner or agent of a Vessel within Western Port shall ensure that sufficient
competent persons are on watch on the Bridge and on Deck at all times.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 25 of 61
3.3.4 Crewing of Vessels - The Master of the Vessel in Western Port shall ensure that
sufficient crew are available to man the Vessel at all times.
3.3.5 Avoid Obstruction of Fairways or Channels
(1) Unless compelled by unavoidable circumstances, the Master of a Vessel shall not, without
the permission in writing of the Harbour Master.
(a) Cause or permit the Vessel to anchor or lie in any fairway or channel.
(b) Cause or permit any cable, chain, hawser, rope or other obstruction across,
(through, below or above) any fairway, or channel.
(2) Where unavoidable circumstances have compelled a Vessel to anchor or lie in any fairway
or channel, the Master of the Vessel shall:
(a) Immediately notify the Harbour Master of the position of the Vessel, and
(b) As soon as possible, move the Vessel to a place where it does not interrupt or
interfere with the passage of other Vessels.
(c) The Master of a Vessel shall notify the Harbour Master immediately the Vessel has
cleared the fairway or channel.
3.3.6 Boats Astern of Vessels - The Master of a Vessel which is lying at anchor shall not,
without prior permission of Harbour Control;
(1) Cause or permit any boat to ride astern of or be attached to the Vessel at a greater distance
there from than six metres.
(2) Cause or permit any lighter or deeply-laden boat or other floating, entirely or partially
submerged object likely to obstruct or damage any other Vessel to ride astern of or be
attached to the Vessel.
3.3.7 Vessels to be properly moored - The Master of a Vessel berthed at a jetty must ensure that
(a) The Vessel is adequately secured alongside with a mooring plan to the satisfaction of the
Harbour Master.
(b) Moorings are tended as required, keeping the lines evenly tight, thus ensuring that the Vessel
remains alongside the berth and prevents undue movement of the Vessel.
(c) Mooring wires or ropes are fastened only to the proper fixtures provided for this purpose.
(d) Self tensioning winches are not used in automatic mode.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 26 of 61
3.3.8 Mooring of Vessels Alongside
If directed by the Harbour Master, the Master of a Vessel which is berthed at a wharf shall
permit other Vessels to moor or lie alongside that Vessel and give free passage to persons
and goods across and over the deck of that Vessel and to and from the wharf and any other
Vessel moored or lying alongside that Vessel.
3.3.9 Removal of Vessels
If directed by the Harbour Master, the Master of a Vessel shall remove the Vessel from the
berth or anchorage allocated to it in accordance with the directions of the Harbour Master.
3.3.10 Use of Propellers at Wharves
The Master of a berthed Vessel shall not cause or permit a propeller to be worked without
the prior permission of Harbour Control and if permission is granted, the Master shall notify
the Masters of Vessels at adjacent berths and the berth operator of his intention to work the
propeller. He must also ensure that the Vessels moorings are of sufficient quantity and in a
suitable condition for the operation, that there is no danger to boats or personnel in the
vicinity and there is no danger of causing any damage due to the working of the propeller for
the entire duration of the operation.
3.3.11 Watch to be on Deck
The Master, owner or agent of a Vessel shall ensure that sufficient competent persons are at
watch on deck at all times, unless suitable alternative arrangements to ensure security and
safety are in place, while the Vessel is alongside a berth.
3.3.12 Crewing of Vessels
The Master of the Vessel alongside a jetty shall ensure that there is sufficient crew available
on board to shift the Vessel if required.
3.3.13 Passenger Vessels at Anchor
The Master of a Passenger Vessel at Anchor is required to enter into a Declaration Of
Security (DOS) with the Port Security Officer (PSO) prior to entering Port. All security
arrangements are determined by the DOS. The provision of any passenger screening,
surveillance/monitoring will be undertaken by the Vessel. If the Master of a Vessel requires
a Water side Restricted Zone enforced, the Vessel is responsible for monitoring this zone.
Note: - Unauthorised persons are not allowed onto the jetty head during mooring and
unmooring operations. Western Port is subject to strong currents and sudden gusty gale
force winds, which may or may not have been predicted. Vessels have broken out from the
berth in such conditions through mooring lines being slack and/or winch brakes not
being fully applied.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 27 of 61
3.4 NAVIGATION WITHIN PORT WATERS
3.4.1 Traffic Control (For Hastings Harbour Control Procedure see Appendix 3)
(1) The Master of a Vessel shall not enter inwards, or depart from a berth or anchorage without
prior permission from Hastings Harbour Control. A dynamic under keel clearance of 0.6
metres or 10 % of maximum draft, which ever is greater, must be maintained by all Vessels
within Western Port.
(2) The Western Entrance channel from the FWB to Buoy No 13 is a two way traffic channel.
(3) The main buoyed channel in the North Arm between Buoys No 13 & 31 is a one way traffic
channel. Outward bound Vessels have priority. An inbound Vessel must not proceed past the
East Arm anchorage, unless asked to do so by Hastings Harbour Control.
(4) The Secondary Channel to the East of the Main Shipping Channel in the North Arm may be
used as a passing channel if required. Permission must be obtained from Hastings Harbour
Control prior to using the secondary channel.
(5) Vessels using the Secondary Channel must remain in the Main Channel as long as practical
and indicate with the appropriate sound signals when departing the Main Channel.
(6) The channel North of Buoy 31, leading to the Steel Wharves, is a one way channel and
departing Vessels have priority. Inbound Vessels should adjust their speed to pass the
outbound Vessel well south of Long Island Point Jetty.
(7) Vessels proceeding to the Steel Wharves should give as wide a clearance as possible to Long
Island Point Jetty and proceed at the slowest speed possible commensurate with safety when
any other Vessel is lying alongside the Jetty at Long Island Point.
(8) Vessels proceeding to the Steel Wharfs must stay within the 9.1 meter channel North of
Buoy no 31. Vessels that want to proceed outside the 9.1 m channel must obtain prior
permission from Hastings Harbour Control.
(9) The Eastern Entrance to the Steel Wharves swing basin between buoys No.33 and No. 35
has a minimum water depth of 7 metres and is subject to strong tidal sets. Vessels using this
entrance must inform Hasting Harbour Control prior to entering Port Waters.
(10) Vessels that intend proceeding North of Buoy 31with a draft of 8.5 m or over must get
permission from Hastings Harbour Control prior to proceeding North of Sandy Point.
(11) Vessels with arrival or departure draughts in excess of 13.0 metres will consult with the
Harbour Master prior to entering Western Port. For such vessels, permission will only be
granted to enter Western Port if their intended maximum drafts permit safe, tide assisted
transit of Port Waters.
(12) Masters of Vessels which want to pass other Vessels within Port Waters must do so only
after prior agreement with the other Vessel and Hastings Harbour Control.
(13) It is the responsibility of all Vessels in Western Port to monitor the weather and ensure that
the Vessel’s safety is monitored at all times while in Western Port.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 28 of 61
(14) The Master and Owner of any vessel entering Western Port must comply with all of the
requirements outlined in the ‘Port Standards & Procedures” and the “Port Operations
Handbook” which include the Harbour Masters Directions. These documents can be
downloaded from the Patrick Ports Hastings website or a copy may be obtained directly
from the Harbour Master. All users of Western Port are reminded that the breaking of any
Direction made by the Harbour Master is an offence under Victorian Legislation.
(15) The Master and Owner of any vessel entering Western Port must not interfere with, come
into contact with, approach or cause any damage to any Navigational Aid, or structure
associated with the safe Navigation of Vessels in Western Port. No person or vessel is
allowed to pass under any of the jetties in Western Port without the permission of the
Harbour Master.
(16) No person or vessel is to interfere with the safe navigation of a vessel in Western Port and it
is forbidden to approach or pass under a vessel in Western Port without the permission of
the Master of that vessel.
3.4.2 Declared Depths
The declared depths in the channels are listed below. Consultation with the Harbour Master
is required if the Master of a Vessel is in doubt as to her maximum allowable draught or if
the Vessel requires tidal assistance to transit Port Waters. These declared depths are reduced
if there is a negative tide or tides are lower than predicted.
(a) Declared depth in the Main Channel from Fairway Buoy to No. 13 Buoy
metres with no tide - 14.9 meters
(b) Declared depth in the Main Channel from No. 13 Buoy to No 31 Buoy
meters with no tide – 14.3 Meters
(c) Declared depth in the main Channel between No 31 Buoy and No 35 Buoy
9.1 metres with no tide.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 29 of 61
3.4.3 Under keel clearance
While in Western Port, the Master of a Vessel is at no time to allow the dynamic under keel
clearance of the Vessel to fall below 0.6 meters or 10% of the Vessels maximum draught,
which ever is greater
Masters of Vessels transiting the channels north of Sandy Point using the maximum
allowable depths above are required to reduce their Vessels speed to minimise the effects of
squat.
Masters of Vessels transiting the Steel Wharves Channel using the maximum allowable
depths above should keep their speed to a minimum to eliminate the effects of squat
Masters should be aware that meteorological conditions can adversely impact predicted tides
by more than half a meter.
3.4.4 Vessels with drafts of 13.0 meters and over.
Vessels with draughts inwards or outwards of 13.0 metres or greater must advise the
Harbour Master at least 48 hours prior to arrival in Port Waters. Conditions of entry,
departure, berthing and unberthing for such vessels will be stipulated by the Harbour
Master on a case by case basis.
3.4.5 Speed of Vessels in Port Waters
The Master of the Vessel shall ensure that a safe speed is maintained at all times in order to
ensure the safety of his own vessel and other vessels navigating and working in the vicinity.
A safe speed is also one that takes into consideration, prevailing conditions such as, but not
limited to - squat, other Vessel traffic, Vessels alongside, Vessels at anchor, Vessels engaged
in diving operations etc.
3.5 Approaches to Port Waters
General traffic rules:-
(1) Vessels should contact Port of Hastings Harbour Control on VHF. Channel 14 one
hour prior to arrival at the Outer Pilot Boarding Ground in position approximate 38º
32.7’ S, 145º 01.8’ E (3.5 miles south of West Head) for pilot boarding instructions
and/or traffic movement instructions.
(2) Vessels should not proceed to the north of the Outer Pilot Boarding Ground unless
instructed by Harbour Control.
(3) An alternate Boarding Ground for use by ships of up to 9.75 m draught is situated
east of Flinders Jetty in position approximate 37º 28.3’ S, 145º 04.6 E. A yellow
buoy showing a yellow light flashing every 4 seconds (flash 1 second, eclipse 3
seconds) marks its centre.
NOTE: Vessels are NOT to use the alternate Pilot boarding ground mentioned above in
3.5 (3) unless directed by Harbour Control.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 30 of 61
3.6 Vessels engaged in Diving Activities
• No professional, commercial, recreational or maintenance related diving activities
are to be conducted within Port Waters without the prior permission of the Harbour
Master.
• Vessels or persons conducting diving activities in Western Port must also ensure that
appropriate signals indicating that diving activities are being conducted are
displayed.
• The Harbour Master must be informed immediately prior to commencement of
diving operations and also be informed on completion of the diving operation within
Port Waters.
• Diving operations must not be conducted unless the above criteria are complied with.
3.7 SMALL VESSELS
3.7.1 Navigation of small Vessels
(1) The Master of a Vessel less than 35 metres in length (other than a port working Vessel) shall
ensure that the Vessel keeps out of the way of:-
(a) Vessels more than 35 metres in length
(b) A tug or line boat assisting the movement, berthing or unberthing of another Vessel.
Note; If in doubt the Master should assume the other Vessel’s length is more than 35 metres and
keep out of the way
(2) The Master of a Vessel less than 35 metres in length (other than a port working Vessel) must
not:-
(a) Anchor in a channel.
(b) Approach within 100 metres of an oil jetty and/ or tankers berthed at oil jetties in
compliance with the waterside restricted zones declared under the Maritime
Transport and Offshore Facilities Security Act.
(c) Navigate Port Waters while taking part in any regatta, contest or race or other event
unless the Harbour Master has been advised of the event taking place.
Note. The Harbour Master requires notification of aquatic events which take place in the Port
Waters. The notification of an event to the Harbour Master must be in the form “Aquatic
Events Notice” as posted on the Patrick Website (http://asciano.com.au/patrick/ports)
Copies of this form can also be obtained by contacting Hastings Harbour Control.
(3) The Harbour Master may at any time suspend or cancel any aquatic event in Port Waters in
the interest of safety or efficient commercial operations.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 31 of 61
4 SAFETY AND ENVIRONMENTAL REQUIREMENTS
4.1 ENVIRONMENTAL PROTECTION
4.1.1 Statutory Provisions and conventions
The Environment Protection Authority (EPA) is the statutory body having primary
responsibility for the enforcement of environmental protection laws in Port Waters.
4.1.2 Ballast water
Vessels wanting to discharge ballast require EPA (Domestic trade) or AQIS (International)
approval prior to arrival in the port. Only clean ballast from segregated ballast tanks is
permitted to be discharged into Western Port, i.e. no ballast water from any tank capable of
carrying oil is permitted to be discharged into Western Port notwithstanding the cleanliness of
the tank or the previous cargo carried in the tank.
4.2 Port of Hastings Requirements
Patrick Ports Hastings is strongly committed to the protection of the marine environment and
to cooperation with the EPA. Without limiting or detracting from any wider environmental
provisions or requirements, Patrick Ports Hastings requires the Master of a Vessel within
Western Port to:-
(a) Comply with the requirements of POWBONS, MARPOL, State Environment
Protection Policy (Victorian Waters) and all relevant legislative requirements
for the protection of the environment within Western Port
(b) Comply with the requirements of Patrick Ports Hastings Safety and
Environmental Plan (SEMP).
(c) Not cause or permit refuse or marine pollutant of any kind to be discharged
from the Vessel into Port Waters.
(d) Not cause or permit a person to pump or discharge any oil, oily water, spirit
or any flammable liquid into Port Waters or to release by venting into the
atmosphere above Port Waters any noxious or hazardous fumes or gas.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 32 of 61
4.3 DANGEROUS GOODS
4.3.1 Containerised Dangerous Cargo
As containerised dangerous goods are not handled through the Port of Hastings on a regular
basis; Masters, Owners and Agents should contact the Harbour Master for current
requirements as these shipments are handled on a case by case basis.
4.3.2 Bulk Liquid Dangerous Cargo
Vessels loading or unloading bulk liquid dangerous cargo are to comply with the procedures
and requirements of all current legislative requirements.
Patrick Ports Hastings requires notification of the intention to load or discharge dangerous
cargo including manifest details which must be lodged with the Harbour Master at least 48
hours prior to ship’s arrival. (see section 1.6.3)
4.3.3 Gas Freeing and/or Tank Washing
(a) Vessels engaged in gas freeing or tank washing whilst at berth are to comply
with the requirements of the Port of Hastings and the terminal.
(b) Generally, the planning for gas freeing and or tank washing is discussed on arrival at
the berth whilst undertaking the Ship/Shore Check List and Exchange of Information
briefing. The timing and process of these operations are agreed with the Harbour
Master and Loading Master
4.3.4 Information relating to acceptance of large Vessels into the Port of Hastings
The following parameters should be used by ship charterers and agents as a general guide to
determine the acceptability of tankers into the Port of Hastings.
1. Deadweight tonnage of 100,000mt
2. LOA to 300m.
3. Draught up to 13.0 m.
4. Distance from manifold centreline to waterline:
16.0m at Crib Point jetty
17.5m at Long Island Point jetty
5. Distance from manifold flange to ships side:
Minimum 1m - Maximum 5m
Note – Irrespective of the information provided above in 4.3.4, consultation
with the Harbour Master is required prior to the acceptance of any Vessel over
100,000 Displacement or having a draught of over 13m into Western Port.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 33 of 61
4.3.5 Additional requirements for ships conveying dangerous substances/oil in bulk.
(1) Declaration prior to arrival
The Master of a ship capable of carrying liquid Bulk Dangerous Substances or Oil in bulk,
other than oil fuel used for the propulsion or operation of the ship, shall ensure that
Harbour Control is advised, in writing, with answers to the Tanker Declaration in Section
1.6.3 at least 48 Hours prior to arrival in port.
(2) Ship/Shore Checklist
A ship/shore safety checklist (as per the latest ISGOTT Edition, as amended) is to be
completed prior to commencement of operations by a representative of the Ship and
Terminal. The DHM will issue a signed Permit to Transport, Handle Dangerous Goods on
satisfactory completion of the Ship/Shore safety check list.
(3) Emergency documents
The Master of the ship having on board or intending to load liquid bulk dangerous
substances shall prepare the following documents and deliver them to the DHM for
placement in the emergency document box at the jetty gate:-
(a) Material Safety Data sheet for the cargo on board or to be loaded;
(b) A current crew list
(c) General arrangement plan of the ship, and
(d) A cargo plan and transfer arrangements.
(4) Alternative access to ship
The Master shall ensure that:-
(a) The outboard accommodation ladder is turned out and rigged ready for immediate
lowering;
(b) The outboard lifeboat is at the embarkation deck and is ready for immediate
lowering:
Note Where it is not possible to turn out the outboard accommodation ladder a pilot ladder
shall be rigged overside in its place.
(5) Anchor ready for letting go
The Master shall ensure that immediately after the ship is secured at the berth the outboard
anchor is walked back clear of the hawse pipe and is kept ready for letting go.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 34 of 61
(6) Towing wires (Fire Wires)
Fire wires are no longer required. However if the Master of a vessel in Western Port requires
them, wire hawsers of adequate strength to allow the ship to be towed from the berth are to
be placed over the outboard side at the fore and aft ends of the ship.
(a) Such wires shall have an eye in the outboard end, be made securely fast to the ship at
the inboard end & shall be tended and adjusted to remain within 1 metre of the water level
to meet changes in the draught of the ship;
(b) In order that sufficient wire can pay out to enable the tugs to tow effectively, 60
metres of slack wire or such other lengths as required by the DHM shall be retained
between bollard and fairlead; and,
(c) To prevent the slack wire from running out, it shall be stopped by a rope yarn or
other easily broken means.
(7) Fire precautions
(a) Ship's fire fighting appliances, including main & emergency fire pump shall be ready for
immediate use as required by ISGOTT (Latest edition, as amended) and the Vessel’s
management procedures. Pressure shall be maintained on the fire main whilst alongside.
(b) A fire hose supplied by the ship is connected between the fire hydrant nearest the
gangway of the ship and a fire hydrant on the berth
Note Where the ship & berth connections are incompatible, an International Fire
Connection supplied by the ship is connected to the shore hydrant.
(c) No person shall, except in an approved location:-
(i) Smoke or have in his possession or under his control any matches, fire or
other means of ignition or any light other than an approved safety lamp;
(ii) Create any spark, fire or flame or use any telephone, tool, electrical apparatus
or other equipment capable of creating any spark, fire or flame
(d) The Master is responsible for ensuring that shore fire fighting arrangements are
understood on board.
(8) State of readiness
Whilst a ship is berthed at a tanker terminal, its boilers, main engines, steering machinery
and other equipment essential for manoeuvring shall be maintained in a state of readiness so
as to permit the ship to move from the berth at short notice.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 35 of 61
(9) Weather precautions
Operations shall be stopped during severe electrical storms, periods of high wind or during
still air conditions, at the discretion or either the Harbour Master, Vessel’s Master, Berth
Operator or Port Operator Representative. When operations are stopped, all tank openings
and cargo valves shall be closed. All vessel’s Masters are required to and are responsible for
monitoring the weather at all times while within Western Port
(10) Receipt and display of port information
Transfer operations shall not begin until:-
(a) The Master has signed a letter which acknowledges possession of safety
requirements and of pertinent terminal and port information;
(b) Notices in the appropriate language bearing the words:
NO ADMITTANCE EXCEPT ON BUSINESS
SMOKING AND NAKED LIGHTS STRICTLY PROHIBITED
have been displayed in prominent positions on board, including access to the ship;
(c) The Master or his representative has signed the Safety Check Lists with the Berth
Representative certifying that all necessary valves ashore and on board are properly
set; that the agreed signals and procedures are understood and that all other matters
relating to safe operations are being carried out.
(11) Emergency telephone
A telephone will be installed on board any ship berthed at the tanker terminals. STD
(Subscriber Trunk Dialling) or ISD (International) is not available from these
telephones.
Note - This telephone is for emergency communications, communication with the
terminal and ship’s husbandry use only.
(12) Ships visitors
Persons other than the ship's crew and persons actually engaged in the work of loading or
unloading Dangerous Goods or Oil in Bulk shall not be allowed on any ships without the
written permission of the berth operator and the consent of the Master of such ship
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 36 of 61
4.3.6 Ship to ship transfers (Petroleum or Liquefied Gas)
The Master of a Vessel in Western Port shall not cause or permit a ship to ship transfer to or
from the Vessel unless the written permission of the Harbour Master has been obtained; and
(a) The Vessels involved in the operation must be compatible
(b) Vessels involved ensure the provision of appropriate fendering.
(c) Pre-planning to cover navigational, operational and safety aspects to be held between
Representatives of the Harbour Master, Pilots and Operators of both Vessels
(d) The requirements of the International Safety Guide for Oil Tankers and Terminals
and, the Ship to Ship Transfer Guide (Petroleum) or (Liquefied Gas) are followed
(e) The receiving tanker will be in all respects ready to load prior to the Vessels coming
alongside each other.
(f) Pre-washing and/or flushing of tanks is not permitted once Vessels secured
alongside each other.
(g) Satisfactory communication skills along with a competent and experienced crew.
(h) The Harbour Master may require a representative in attendance during mooring &
transfer.
(i) Oil pollution, emergency management and security arrangements must be decided
upon for the proposed operation
(j) A comprehensive risk assessment has been carried out and signed off on by all
parties involved in the proposed operation
Not withstanding the above provisions, the Harbour Master may monitor safety and pollution
prevention requirements during the transfer operations.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 37 of 61
4.3.7 Bunkering
Bunkering must not be carried out in Port Waters without the written permission of Hastings
Harbour Control which must be obtained by Submitting the “Dangerous Goods Permit”
form which is available on the Patrick Website. It can also be obtained from Hastings
Harbour Control.
In addition, the following requirements apply prior to and during bunkering operations.
The Master or agent of a Vessel intending to take bunkers while in Port Waters shall
notify Harbour Control in writing or by email. The notification shall include:
• Name of Vessel
• Name of berth bunkering will take place
• Quantity and type of bunkers
• Anticipated start date/time & anticipated finish date/time.
• The Master of a Vessel must not carry out bunkering in adverse weather conditions
• There has been an exchange of all relevant information between the Vessel and all
parties involved in the bunkering operation.
• The bunker hose(s) are of sufficient length and are in good condition and in test in
accordance with the appropriate Australian standard and the test certificate(s) are
available on request.
• All bunker hose connections have a good seal and a tightened bolt is used in every bolt
hole of the bunker hose connection flanges.
• Effective communications are established between Vessel and all parties involved in
the bunkering operation.
• There is safe access between the barge/truck and the Vessel.
• An effective deck watch is maintained.
• The pumping rate has been agreed.
• An emergency shut-down procedure has been agreed.
• Fire fighting equipment on board & ready for immediate use.
• Scuppers on barge/jetty and Vessel are closed off or sealed.
• Unused cargo connections are blanked.
• Unused valves are closed.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 38 of 61
• Compliance with naked light requirements.
• Provision for emergency escape.
• Emergency pump stops are operational.
• Window type air conditioners disconnected.
• Drip trays are in place
• Absorbent material is on site.
• A fire hose is connected to the shore using an international shore connection.
If any of the above requirements cannot be complied with, bunkering operations must
not commence or, if during the course of bunkering cease to be complied with, then
bunkering must stop immediately.
(2) If a bunker spillage occurs the following actions are to be implemented immediately:
(a) Cease bunkering operations
(b) Take measures to stop or limit the spillage
(c) Notify Harbour Control
(d) Provide formal notification of a pollution incident
(3) On completion of bunkering equipment is to be disconnected and care is taken to
avoid spillage.
(4) Harbour Control is to be advised promptly of commencement and completion times.
The Harbour Master may monitor pollution prevention requirements at any time.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 39 of 61
4.4 Entry into confined spaces/cargo tanks
When personnel are required to enter a cargo tank or other confined space that has
previously held a bulk dangerous cargo or where the condition of the atmosphere is
not known, the following procedures shall apply: -
(1) Where a member of the ship’s crew is required to enter a cargo tank or confined
space, the entry procedure must be fully documented with the ship’s own operating
procedures & in accordance with guidelines such as in the latest edition of ISGOTT.
(2) Where a person other than a member of the ship’s crew is required to enter a cargo
tank or confined space, an independent chemist must issue a gas free certificate for
the particular cargo tank or confined space, approving it Safe for Entry.
4.5 Hot work on Vessels in Western Port
Hot work in the Port of Hastings requires a permit to be issued by Harbour Control. Hot
work is not to commence prior to a permit being issued by Harbour Control.
Hot work on board that involves ship’s crew only must be fully documented and conducted
in accordance with well established guidelines such as in the latest edition of ISGOTT and
the ship’s own operating procedures.
Hot work done with the assistance of a person who is not a member of the Vessel's crew
must be carried out by a suitably qualified person with who is covered by all statutory and
commercial insurance requirements.
If the work is to be carried out in a confined space the requirements for entry into a confined
space or cargo tank also apply.
In addition, hot work is not to be commenced prior to a gas free certificate being issued by a
suitably qualified person stating that the area is "Safe for Hot Work". Depending on the type
of ship and area that the hot work is to be conducted in, a gas free certificate by an industrial
chemist may be required, prior to a permit being issued by Harbour Control.
4.5.1 At Anchor
In addition to the requirements of 4.5 above, if hot work is to be carried out at anchor with
the assistance of a person who is not a member of the crew, a boat must be kept on standby
for transfer of persons ashore in case of an emergency.
4.5.2 Hot work at berth
In addition to the requirements of 4.5 above, hot work must not take place on board a Vessel
at a berth without the permission of the Berth Operator.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 40 of 61
4.6 HULL CLEANING
4.6.1 Background
In recent years much attention had been focused on the introduction of exotic marine
organisms via ship’s ballast. Another way of transporting exotic marine organisms is via a
ship’s hull.
To minimise the risk of further exotic organisms establishing in Victorian waters, the
following Code of Practice for Hull Cleaning has been established in consultation with the
Environment Protection Authority and Australian Quarantine Inspection Service.
Application
(1) These requirements shall apply in Western Port.
(2) These requirements are to be used in conjunction with any relevant EPA requirements.
4.6.2 Code of Practice for Hull Cleaning
(1) No part of a Vessels hull is to be cleaned without obtaining written permission
from the Harbour Master.
(2) In-water hull cleaning or polishing of ship’s propellers is prohibited, except under
exceptional circumstances and prior written permission must be obtained from
the Harbour Master.
(3) The cleaning of sea chests, sea suction grids and other hull apertures may be
permitted provided that any debris removed (including encrustation, barnacles, and
weeds) is not allowed to pass into the water column or fall to the sea bed and subject
to any other conditions attached to the permit. An application seeking permission to
carry out this work must be lodged with the Harbour Master at least five (5) working
days prior to commencement of the anticipated start date. Such application will detail
how encrustations, barnacles and other debris will be contained and or collected for
disposal as well as the method of disposal.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 41 of 61
4.7 WASTE DISCHARGES & GARBAGE
4.7.1 General Prohibition
(1) Discharge into Port Waters or upon any wharf pier or jetty of ships refuse, rubbish,
offensive liquid or other waste matter is prohibited.
(2) Sewage must be retained on board unless disposed of in compliance with EPA
requirements. Sewage collection is available, arranged through agent.
(3) Garbage collection is available, arranged through agent.
(4) Prescribed wastes may only be disposed of in accordance with EPA Regulations
(5) Work that involves atmospheric pollution, such as sand blasting, is not permitted
(6) Work that involves noise that exceeds EPA regulations is not permitted
4.7.2 Collection Procedures
(1) Containers used for the collection of ship’s garbage and discharge ashore must be in
sound condition, i.e., containers must not be perforated to allow drainage of liquids
onto either the wharf or spring-fendering.
(2) Tail ropes when in use should be affixed in a manner, which does not require
perforation of the drum type container.
(3) In order to avoid inadvertent contamination of the wharves or Port Waters garbage
containers should be placed inboard and in a position on deck where facilities are
available for discharge from the ship to the refuse removal vehicle.
(4) It is the responsibility of the ship to deliver garbage to the refuse removal vehicle.
(5) Garbage containers must be discharged only at the time when a refuse removal
vehicle is in attendance.
(6) Attention is drawn to the Quarantine requirement that all ship’s garbage containers
are to be covered with a well fitting lid.
(7) An approved garbage collection service provider must be used when garbage is to be
removed from a Vessel in Western Port.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 42 of 61
4.8 Immobilisation of main engines
The Master of a Vessel which is within Western Port must not cause or permit any
immobilisation or repairs to engines or other repairs that immobilise the Vessel to be carried
out without the prior permission of the Harbour Master. When the Vessel is berthed at any
wharf, the permission of the Port Facility Operator must also be obtained. If a Vessel wants
to immobilise while at anchor, it may be necessary to have a tug standing by at the Vessels
expense. The decision to have a tug on standby will be made by the Harbour Master or his
representative on a case by case basis.
4.9 Discharging flares, rockets or explosives
A person must not, whilst on board any Vessel within Port Waters, discharge or use any gun,
firearm, flares, rockets or other explosive without the prior written permission of the
Harbour Master except in an emergency.
4.10 Vessels engaged in diving operations
The Master of a Vessel underway or at anchor in the Port Waters must not without the prior
permission of the Harbour Master allow any professional, commercial or recreational diving
activities to be conducted.
4.11 Application for regattas, boat races etc.
Notice pursuant to paragraph 3.7.1 must be lodged with the Harbour Master not less than 5
working days before the event. An “Aquatic Event Notification” form can be downloaded
from Patrick Ports Hastings website http://asciano.com.au/patrick/ports or obtained by
contacting Hastings Harbour Control.
The notice must contain:-
(1) Name, telephone contact and facsimile number of the organisation or person
organising the event.
(2) The proposed start and finish dates and times of the event.
(3) The approximate number of boats expected to take part.
(4) The size and type of boats expected to take part.
(5) The course and waypoints for the event.
(6) Communication methods.
(7) Details of any waivers sought in relation to the provisions of this Handbook
for Vessels participating in the event.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 43 of 61
5.0 EMERGENCY MANAGEMENT PROCEDURES
5.1 Marine Incidents
Powers of the Harbour Master
The Harbour Master may give directions prohibiting the entry into or requiring the removal
from Port Waters of any Vessel that the Harbour Master has reasonable cause to believe is
unseaworthy, or in danger of sinking and causing an obstruction to navigation in those
waters, or is in imminent danger of causing damage to the marine environment or property.
5.2 Port of Hastings Emergency Management Plan
(1) The Port of Hastings Emergency Management Plan details agreed arrangements for
the prevention of, response to and recovery from emergencies that could occur within
the Port of Hastings. The Plan is underpinned by local Municipal Emergency
Management arrangements. This will ensure the response to an emergency with the
Port of Hastings is a cooperative one and conducted with a coordinated approach
from the Port community and outside agencies.
(2) The plan may be activated at any time by the Harbour Master or an officer authorised
by the Harbour Master.
(3) Management and combat of the emergency may involve relevant authorities such as
Police, Water Police, Country Fire Authority, State Emergency Service, the Marine
Safety Victoria, the Environment Protection Authority and the Master of the Vessel
involved. Organisations such as Tyabb Airfield, ESSO, BLUESCOPE, UNITED and
other industries, local Municipal Authorities, and ship’s agents may be affected and
called on for assistance.
(4) The Master of a Vessel in respect of which the emergency plan may be invoked, or
who observes any incident which may call for combat action, should communicate
with the Duty Harbour Master who will take appropriate action as detailed in the Port
Emergency Management Plan. The cooperation of Masters is requested to stabilise
and contain emergencies at the earliest possible moment.
(5) Masters of Vessels carrying commodities which present particular hazards should
determine with Hastings Harbour Control, at least 48 hours prior to arrival, the action
to be taken in the event of an emergency arising during the Vessel’s stay in Port. This
information will then be recorded and available for the use of combat authorities.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 44 of 61
5.3 Reporting of Incidents in Port Waters
In the event of the occurrence of any incident that is likely to affect navigation in Port
Waters or cause Marine Pollution, any person causing or observing such incident should, as
soon as possible, provide as much information as available and applicable to Hastings
Harbour Control. The template below may be used to provide this information to the
Harbour Master.
To: Harbour Master - Port of Hastings
Name of Vessel…………………………… Port of Registry……………………………
Official No. ………………………………... Gross Tonnage…………………………….
Type of Vessel…………………………….. Name of Master…………………………...
Name, address and contact number of Owner……………………………………………..
Name, address and contact number of Agent………………………………………………
Classification Society………………………………………………………………………
Nature of Cargo……………………………………………………………………………..
Number of Crew…………………………… ………………………………………………
Number of Passengers………………………………………………………………………
Date & Time of Incident…………………………………………………………………….
Location of Incident……………………….... ……………………………………………..
Arriving or Departing ………………………………………………………………………
Draught (Fore & Aft)………………………………………………………………………..
Details of Incident ………………………………………………………………………….
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
Note: Masters should note that Transport Safety Victoria (TSV) may conduct an investigation
following any incident involving a vessel in Western Port. The occurrence of any incident on
board a vessel in Western Port must be notified immediately to The Harbour Master.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 45 of 61
5.4 MARINE POLLUTION
5.4.1 Western Port Region Marine Pollution Contingency Plan (WPRMPCP)
(1) The WPRMPCP is prepared by the Regional Marine Pollution Committee to the
requirements of the Victorian Marine Pollution Contingency Plan (VICPLAN),
which is in turn established under the authority of the Administrative Arrangements
of the National Plan to Combat Pollution of the Sea by Oil. (National Plan).
(2) VICPLAN is an integral component of the Victorian State Emergency Response
Plan.
(3) Patrick Ports Hastings has been designated under VIC Plan as the Lead Agency for
initial response to marine pollution on the Victorian coast between Cape Schanck
and Wilsons Promontory.
5.4.2 Mandatory Notification (Marine Pollution)
All marine pollution events between Cape Schanck and Wilsons Promontory (including the waters within Western Port) must be reported to the Harbour Master on 0429 008 812 or the Duty Harbour Master on 0428 549 235 as soon as possible.
Additionally, in the event of a discharge or probable discharge from a Vessel within the area
described above the Master must:-
(1) Take immediate steps to prevent further discharge of the pollutant and to contain it
within the vicinity of the ship.
(2) Make an immediate report to Hastings Harbour Control, the DHM or the Harbour
Master by telephone or VHF radio on the numbers/frequencies listed in Appendix 1
(3) The report should contain the following information as relevant.
(a) Name, radio call-sign and flag of ship.
(b) Frequency or frequencies of radio channel or channels monitored.
(c) Name of owner and address, telex, facsimile and telephone number of
principal place of business of owner.
(d) Name, address, telex, facsimile and telephone number of principal place of
business of the charterer, manager or operator of the ship or the agent in
Australia of the charterer, manager or operator of the Vessel.
(e) Type of ship (eg oil tanker, chemical tanker, dry cargo ship) and gross
tonnage.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 46 of 61
(f) Date and time (state whether UTC, EST or Daylight Saving EST) of the
occurrence of the incident.
(g) A description of the incident including any damage sustained.
(h) The position, course and speed of the ship at the time of the incident.
(i) The technical name (or, where the technical name is not known, the trade
name) UN number, Classification in the International Maritime Dangerous
Goods (IMDG) Code (where applicable), name of the manufacturer, quantity,
concentration, of the oil or oily mixture discharged or likely to be
discharged into the sea.
(j) Type & quantity of cargo carried, including details of harmful substances
carried.
(k) Ability to transfer cargo and ballast.
(l) Assistance which has been requested from or which has been provided by
others.
(m) Cause of the discharge.
(n) Whether the discharge is continuing and the approximate quantity discharged.
(o) Weather, sea and current conditions in the vicinity of the discharge.
(p) Where applicable, an estimate of the discharge movement and the surface
area of the discharge.
(q) Actions being taken with regard to the discharge and the movement of the
ship.
Note – The Harbour Master must be advised in all instances of marine pollution as this is a
statutory requirement. However, reporting to the Harbour Master does not relieve the
Vessels Master of his obligation to report to all other relevant authorities.
5.5 Emergency Contact Numbers
Police/Fire brigade/Ambulance/Marine Rescue 0 0 0
Hastings Harbour Control 0428 549 235
Harbour Master 0429 008 812
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 47 of 61
6.0 PORT SECURITY
6.1 Information and obligations
Introduction
The Port of Hastings is a security regulated port as set out in the Maritime Transport and
Offshore Facilities Security Act 2003 as amended and its associated regulations.
Operators or other stakeholders in the Port of Hastings as well as operators of Australian or
foreign registered ships who are unsure of their obligations under the Maritime Transport
Security Act should seek advice from the Office of Transport Security at:-
Mailing Address Office of Transport Security
Department of Transport and Regional Services
GPO Box 594
Canberra ACT 2601
Office Address Office of Transport Security
Department of Transport and Regional Services
111 Alinga Street
Canberra ACT 2601
Operations Centre Tel: 1300 307 288
Email [email protected]
Website www.infrastructure.gov.au
6.2 Port Security Officer
A Port Security Officer (PSO) has been appointed for the Port of Hastings. Contact details
for the PSO are set out below:-
Address Stony Point Depot
Stony Point Road
Crib Point
Victoria 3919
Mailing Address PO Box 204
Crib Point
Victoria 3919
Telephone Office
Mobile
Alternate
03 5983 9406
0429 008 812
0428 549 235
Alternate Email
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 48 of 61
6.3 Harbour Master
The Harbour Master may, at any time and for any period of time restrict entry to the port for
all or any Vessels in the interests of Port security. Such restriction will include any Vessel
which does not meet the requirements of the International Ship and Port Facility Security
(ISPS) Code.
6.4 Port Security Committee
A Port Security Committee has been established in the Port of Hastings.
All enquires to the Port Security Committee should be directed to the Port Security Officer
6.5 Responsibilities
It is the responsibility of the Port Facility Operators and Port Service Providers within the
security regulated Port of Hastings to submit to the Australian Department of Transport and
Regional Services maritime security plans in accordance with the Maritime Transport and
Offshore Facilities Act 2003 as amended and its associated regulations.
A Port Facility is described as an area of land or water within a security regulated port
(including buildings, installations or equipment in or on the area) used either wholly or
partly in connection with the loading or unloading of ships.
A Port Service Provider is one of the following:-
• Tug/towage operator
• Bunker barge operator
• Lighter operator
• Pilot boat operator
• Line Handling operator.
Self identification forms to enable entities to identify whether they are required to submit
Maritime Security Plans to the Office of Transport Security for approval can be obtained from
the Department’s internet site
Operators of Australian or foreign registered ships should contact Office of Transport Security in
order to ascertain their requirements.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 49 of 61
6.6 Levels of Security Alert
In line with the International Ship and Port Facility Security (ISPS) Code December 2002,
the following three security levels have been adopted by the maritime industry:-
(a) Security Level 1 –Normal. The level for which standard security measures shall
be maintained at all times.
(b) Security Level 2 - Heightened The level for which appropriate additional security
measures shall be maintained for a period of time as a result of heightened risk of a
security incident.
(c) Security Level 3 – Exceptional. The level for which further additional security
measures shall be maintained for a limited period of time when a security incident
is probable or imminent, although it may not be possible to identify the specific
target.
In addition to these the Commonwealth of Australia has four (4) security levels of alert. The
following table shows the correlation between Commonwealth levels & ISPS Code levels.
Commonwealth Levels of Alert ISPS Code Levels of Alert
Low Security Level 1
Medium Security Level 1
High Security Level 2
Extreme Security Level 3
Note - The Port of Hastings always refers to the ISPS Code levels of Alert.
6.7 Notification of Security Alert Level
The Security Level for the Port of Hastings will be notified via the HM, DHM or Hastings
Harbour Control.
6.8 Declarations of Security
Ship Security Officers seeking a Declaration of Security (DOS) need to contact either the
Port Security Officer, Port Facility Security Officer for their berth or the Port Service
Provider servicing their ship depending on the circumstances. Contact details for the
relevant security officer can be obtained from the Port of Hastings Harbour Control.
Note (a) Long Island Point and Crib Point oil jetties facilities require a DOS
between all Vessels at their respective berths.
(b) Passenger ships requiring to anchor must exchange a DOS with the Port
Security Officer prior to the Vessels arrival.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 50 of 61
6.9 Ship Security Certificates
At Security Level 1, Vessels entering the Port Waters of the Port of Hastings are required to
provide the DHM, on request, with the following:-
(a) A valid International Ship Security Certificate
(b) A statement of compliance with the ISPS Code
(c) A Declaration of Security when required.
This information is expected to be provided through the ship’s agent in advance of arrival of
the Vessel in port. Failure to provide the information on request may result in the Vessel
being denied entry to the port by the Harbour Master or entry being delayed.
In addition to the above information, more detail may also be required from Vessels at
Security Levels 2 & 3. The frequency of such requests at shall be based on risk and shall be
at a frequency recommended by the Port of Hastings Port Security Committee.
The Harbour Master can restrict entry to the port for any or all Vessels based on security or
safety grounds. Such restrictions will be communicated to the ship’s Master or agent either
verbally or in writing or to all Vessels by a Notice to Mariners.
6.10 Restricted Zones
In accordance with the Maritime Transport and Offshore Facilities Security (MTOFS) Act
2003 as amended and its associated regulations, a number of land-side and water-side
restricted zones exist within the Port of Hastings.
Land-side restricted zones are in place:-
(a) At all times at the oil jetties.
(b) At the Steel Wharves when there is a vessel alongside.
Water-side restricted zones are in place all the time at the oil jetties within 100 meters
of the jetty or Vessel alongside the jetty and all Port Waters at Security Level 3
Note Unauthorised access to a land-side or water-side restricted zone is an offence under the
MTOFS Act and severe penalties apply.
6.11 Reporting of Security Breaches or Suspicious Behaviour
Ship’s Masters, all operators and other stakeholders in the Port of Hastings must report all
breaches of security, criminal activity or suspicious behaviour. Immediate reports of security
breaches, criminal activity or suspicious behaviour should be made to:-
Victoria Police emergency number 000
and
Port of Hastings Harbour Control 0428 549 235
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 51 of 61
7.0 APPENDICES
APPENDIX 1 - CONTACT NUMBERS
TELEPHONE NUMBERS
Patrick Ports Hastings Office (03) 5983 9406
Hastings Harbour Control 0428 549 235
EMERGENCIES 000 and Harbour Master on 0429 008 812
Water Police 1800 135 729
Police Hastings (03) 5970 7800
Hospital Frankston (03) 9784 7777
Police Frankston (03) 9784 5555
BlueScope Hastings Main Gate (03) 5979 6106
BlueScope Hastings Jetty Gate (03) 5979 6109
ESSO Hastings Office (03) 5970 7500
ESSO Hastings Jetty Gate (03) 5970 7560
ESSO Hastings Jetty Operator (03) 5970 7561
United Hastings Office (03) 5979 7177
United Hastings Jetty Gate (03) 5983 6455
SHIP TELEPHONE NUMBERS
Crib Point Jetty 0407 685 180 POH Ships Phone
Long Island Point Jetty 0407 845 057 POH Ships Phone
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 52 of 61
APPENDIX 2 - CHARTLETS NORTH ARM – Between Stony Point and the Steel Wharves
Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 53 of 61
BLUESCOPE STEEL WHARVES & SWING BASIN Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 54 of 61
LONG ISLAND POINT JETTY and SWING BASIN Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 55 of 61
CRIB POINT JETTIES and SWING BASIN
Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 56 of 61
STONY POINT JETTY & APPROACH Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 57 of 61
Western Entrance & Cowes Anchorage
Not to be used for navigational purposes
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 58 of 61
Appendix 3 - Hastings Harbour Control Procedures
Hastings Harbour Control
Mission Statement
Patrick Ports Hastings is committed to facilitating the safe, efficient, environmentally responsible and commercially viable use of the “Declared Port Waters of the Port of Hastings” by Vessels using the berths at BlueScope Steel, Crib Point, Long Island Point, Stony Point and Anchorages within the Port of Hastings. Patrick Ports Hastings Harbour Control Service will have the “call-sign “Hastings Harbour Control”.
Categories of Vessels expected to comply
All Vessels that are required to submit an “Application to use Channel and Berth” to Patrick Ports Hastings must comply with the requirements of Hastings Harbour Control. Vessels which are not required to submit an “Application to use Channel and Berth” to Patrick Ports Hastings may be required to comply with requirements of Hastings Harbour Control at the discretion of the Harbour Master.
Note: For purposes of clarification;
Hastings Harbour Control is an information service. The ultimate responsibility for the safe navigation of a Vessel always remains with the Master of the Vessel.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 59 of 61
5) Harbour Control tasks and activities that Hastings Harbour
Control undertakes
(a) To collect, monitor and disseminate information on Vessel traffic movements within Port Waters by all means reasonably available.
(b) To collect and disseminate information from sources reasonably available on hazards to navigation and any other information likely to be of relevance to port users. (c) To provide pertinent information, such as tide and weather information, to port users on request and at the discretion of Hastings Harbour Control.
(d) To ensure, as far as reasonably practicable, that the quantity and quality of the information provided to port users is appropriate to
assisting Vessels in their shipboard navigational decision making. (e) To operate in conjunction with the Harbour Masters directions and the requirements of Patrick Ports Hastings.
6) Times of Operation
Hastings Harbour Control is made operational on an as required basis at the discretion of the Harbour Master. It usually operates from one hour prior to the expected time of arrival and 30 minutes prior to the expected time of departure of a Vessel that is expected to comply with Hastings Harbour Control requirements until the Vessel is berthed, anchored or has cleared Port Waters. Hastings Harbour Control is non operational and does not maintain a VHF listening watch at all other times.
Note: Hastings Harbour Control will not be operational for Vessels that
arrive earlier than their advised time of arrival or for Vessels at anchor. Hastings Harbour Control is contactable by telephone 24 hours a day, every day of the year, on 0428 549 235.
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 60 of 61
7) Service Area
The area covered by Hastings Harbour Control shaded in blue in Figure 1 below
Port of Hastings Operating Handbook including Harbour Masters Directions
July 2014
Page 61 of 61
Hastings Harbour Control Rules - Vessels that are expected to comply
with the requirements of Hastings Harbour Control must
a) Report to Hastings Harbour Control on Marine VHF CH 14, one hour prior to arrival at the outer Pilot boarding ground. Not proceed to the inner Pilot boarding ground unless authorised to by Hastings Harbour Control.
b) Not enter Port Waters until the Pilot has boarded unless authorised to do so by Hastings Harbour Control. The Pilot does not take charge of the navigation of the Vessel until such time as it is mutually agreed to between the Pilot and the Master of the Vessel. Report Pilot boarding & disembarking times to Hastings Harbour Control on Marine VHF CH l4.
c) Not arrive or depart from a berth or anchorage unless authorised to do so by Hastings Harbour Control.
d) Report to Hastings Harbour Control on Marine VHF CH l4, the time of passing the Fairway Buoy, inbound and outbound.
e) Report to Hastings Harbour Control on Marine VHF CH l4, the time of passing Sandy Point, inbound and outbound,
f) Only anchor in areas, specified on a case by case basis, by Hastings Harbour Control.
g) When anchoring or departing an anchorage, report the time and position of anchoring or the time of departing the anchorage to Hastings Harbour Control on Marine VHF CH l4.
i) Monitor Marine VHF Channels 08, 14 and 16 while underway, at anchor, lying alongside a berth and when carrying out cargo operations.
j) Report to Hastings Harbour Control discrepancies in aids to navigation or hazards to navigation that may be observed while in Port Waters
k) Report to Hastings Harbour Control deficiencies on the Vessel prior to entering Port Waters and deficiencies on the Vessel that develop after entering Port Waters
l) Comply with Harbour Masters Directions and relevant Port, State, National and International legislation and regulation.
m) While in Port Waters, at no time allow either the dynamic or static under keel clearance of the Vessel to fall below 0.6 meters or 10% of the Vessels maximum draught, which ever is greater. Vessels with draughts inwards or outwards of 13.0 metres or greater must advise the Harbour Master at least 48 hours prior to arrival in Port Waters.