POPULAR MECHANICAL LOCK - codelocks.us
Transcript of POPULAR MECHANICAL LOCK - codelocks.us
POPULARMECHANICALLOCKPremium range of light duty mechanical locks. Multiple options available suitable for a wide range of applications.
Locks in the CL200 range allow various ways to manage entry - by code, key or hold back feature operations. The key can be used to retract the latch without the need for the code. On request, multiple locks can be supplied coded or keyed alike. Back to Back versions are also available, suitable for environments where a code is required on both sides of the door.
FEATURES
• Multiple models and options available• Dual backset deadlatch - 23/8” and 23/4”• Key bypass option available across all models• Suitable for interior and exterior use• Dual backplate allows option of hold back feature• Tumbler alignment for easy code change• Selected models available in stainless steel or polished brass finish• Suitable for wooden/metal doors between 13/8” - 23/8” thick• Neoprene seals included
Easy to install
8,191Total code
combinationsKey bypass
options
LIFETIME
LIMITED
GUARANTEE
Limited lifetime warranty*
www.codelocks.com
Scan to shop!
Hold Back FeatureLatch models are supplied with a hold back feature enabled allowing free entry when required, without having to use a code. The function can be disabled during installation requiring code input to open the door.
PRODUCT DIMENSIONS
TECHNICAL SPECIFICATIONS
LOCK MODELS
Tubular LatchLight duty tubular latch retracts by turning inside lever freely, or the outside knob after code input. Features passage function.
FEATURE DESCRIPTIONSpindle Type Flat spring loaded spindle
Tubular Latch Light duty deadlocking latch
Material Zinc Alloy
Finish Color Stainless Steel (All) & Polished Brass (Excludes CL200)
Non Handed Locks will fit doors hung on the left or right
Door Thickness 13/8” - 23/8” (35mm - 60mm)
Codes 8,191 non sequential code combinations available
Code Storage Single Code
Buttons 14 stainless steel buttons
Key Bypass Available to order with any model
Keyed Alike Locks can be supplied keyed alike on request
Install Options Vertical only
Suitable For Interior and exterior use
Surface DeadboltBolt slides on inside of door, to lock or unlock. Bolt is moved manually by outside knob after code input and freely by inside knob at all times.
Back to Back Option (BB)Light duty tubular latch. Two coded plates for installation on both sides of the door. Provides coded access in both directions.
CL200 CL210 CL190
Tubular DeadboltBolt is moved manually by outside knob after code input and freely by inside knob at all times. Bolt extends 1” (25mm) beyond door edge when locked.
CL290CL255
Tubular Latch:
CL200
Code Change MethodRequires removal of the lock from the door. The code can be changed by repositioning the tumblers in the code chamber. Locks are supplied with a random code commencing with the ‘C’ clear button.
ADDITIONAL FEATURES
Key BypassKey bypass is available to order on any model within the CL200 range. Locks can be keyed alike on request.
15/8” (43mm)
HOLD OPEN BUTTON1”
(25mm)
21 /4”
(57m
m)
23/4” (70mm)
5 9 /1
6 ” (1
41m
m)
15/8” (41mm)
CL255
PASSAGE FUNCTIONBUTTON
*Codelocks mechanical locks offer a limited lifetime warranty and will be repaired, service or replaced free of charge if they develop a manufacturing fault. Faults caused by misuse, abuse and/or poor fitting are not covered under warranty.All our door locks (excluding the CL50, CL160, CL200 and CL2000 which comes with dual backset) come with 2 3/4” standard backset. 2 3/8” backset can be substituted upon request at no additional charge. © 2019 Codelocks Ltd. All rights reserved.
25mm (1”)
57mm
(21/4 ”)
70mm (23/4”)
60mm (23/8”)
Requires 1”(25mm) cross bore hole
Standard Supply