poover 曲线图 12V 300ALithium-iron phosphate battery pack series PBLF12-300A 12V 300A | LiFEPO4...
2
POOVER Lithium-iron phosphate battery pack series PBLF12-300A 12V 300A | LiFEPO4 12V 300Ah Lithium-ion battery is a high-performing deep cycle battery, the PBLF12-300A is ideal for material handling or stationary energy storage applications, the module's inherent safety, long cycle life, and zero maintenance Comprehensive cost performance, portability, safety, it is the best solution at present, in addition, the adopted latest square cells, the safety (safety valve device) is the safest among all LIFEPO4 cells. which uses China's top brand cells, has a supercycle life of 4000 Cycles at 81.5% depth of discharge, which is not possible with other types of LiFEPO4 batteries Overview ELECTRICAL SPECIFICATIONS With POOVER professional design and BMS solution, the Built-in Battery Management system (BMS) operates seamlessly with your application, the BMS offer smart monitor & manages all cells module parameters and circuit in real-time, which solution offers end-users another alternative to lead-acid by replacing with this reliable lithium-ion ( LiFEPO4 ) solution performing with at least twice the run-time and <70% of the weight of similarly sized SLA batteries Nominal Voltage : 12.8 V Nominal Capacity : 300Ah( real capacity : 315Ah) Capacity @150A/0.5C 126 min Energy : 3968Wh Resistance ≤20 mΩ 50% SOC，AC 1KHz Efficiency : 99% Self Discharge <3% per Month Maximum Modules in Series : 4S3P MECHANICAL SPECIFICATIONS Dimensions (L x W x H) : 20.5x9.4x8.6” 521*238*218 mm Weight : about 61.7 lbs (28 kg) Terminal Type : M8 Terminal Torque : 80 - 100 in-lbs (9 - 11 N-m) Case Material : ABS Enclosure Protection : IP56 Cell Type Chemistry : Square - LiFePO4 © 2019 POOVER Battery, Phenix ltd. All rights reserved. POOVER Battery is not liable for damages that may result from any information provided in or omitted from this publication, under any circumstances. POOVER Battery reserves the right to make adjustments to this publication at any time, without notice or obligation. B115, Building 7, Shenzhen Bay Science and Technology Ecological Park, No. 1819 Shahe West Road, Gaoxin Community, Yuehai Street, Nanshan, Shenzhen +86 185 8898 4662 +86 186 8207 6556 https://poover.tech POOVER DISCHARGE SPECIFICATIONS Maximum continuous discharge current : 300A BMS Discharge Voltage Cut-Off : 8.8V ( 2.20V±0.0625vpc@800—1300mS) BMS Reconnect Voltage : 10.8V ( 2.7±0.075vpc) Recommended Low Voltage Disconnect : 11V Recommend SOC rate : 10% ~ 90% Peak amps 10 seconds : 800A BMS Discharge Current Cut-Off: 800-1000A(100—800ms) Short Circuit Protection: 50—200uS Recovery status: Automatically Recover CHARGE SPECIFICATIONS Recommended Charge Current：30A - 150A Maximum charging current : 300A Charging voltage: 14.4V Charge voltage Balance : 14.4V (3.60±0.05V) Charge Current Balance : 36±5mA BMS Charge Voltage Cut-Off : 15.6V (3.75 ± 0.025V @800—1300mS) BMS Reconnect Voltage : 14.2V (3.55±0.05vpc) TEMPERATURE SPECIFICATIONS Certifications : MSDS CE (battery) UN38.3 UL1642 & IEC62133 (cells) TEMPERATURE SPECIFICATIONS Discharge Temperature : -4 to 131ºF (-20℃～+55 ℃, humidity ≤ 90%RH) Charge Temperature : 32 to 131 ºF ( 0℃～+55°C ,humidity ≤ 90%RH) Storage Temperature 32 to 95 ºF ( 0℃ to 35 ºC) BMS High Temperature Cut-Off 176 ºF (80 ºC) Reconnect Temperature 122 ºF (50 ºC)
Transcript of poover 曲线图 12V 300ALithium-iron phosphate battery pack series PBLF12-300A 12V 300A | LiFEPO4...
POOVERLithium-iron phosphate battery pack series
PBLF12-300A
12V 300A | LiFEPO412V 300Ah Lithium-ion battery is a high-performing deep cycle battery, the PBLF12-300A is ideal for
material handling or stationary energy storage applications, the module's inherent safety,
long cycle life, and zero maintenance
Comprehensive cost performance, portability, safety, it is the best solution at present, in addition,
the adopted latest square cells, the safety (safety valve device) is the safest among all LIFEPO4 cells.
which uses China's top brand cells, has a supercycle life of 4000 Cycles at 81.5% depth of discharge,
which is not possible with other types of LiFEPO4 batteries
Overview
ELECTRICAL SPECIFICATIONS
With POOVER professional design and BMS solution, the Built-in Battery Management system (BMS)
operates seamlessly with your application, the BMS offer smart monitor & manages all cells module
parameters and circuit in real-time, which solution offers end-users another alternative to lead-acid
by replacing with this reliable lithium-ion ( LiFEPO4 ) solution performing with at least twice
the run-time and <70% of the weight of similarly sized SLA batteries
Nominal Voltage : 12.8 V
Nominal Capacity : 300Ah( real capacity : 315Ah)
Capacity @150A/0.5C 126 min
Energy : 3968Wh
Resistance ≤20 mΩ 50% SOC，AC 1KHz
Efficiency : 99%
Self Discharge <3% per Month
Maximum Modules in Series : 4S3P
MECHANICAL SPECIFICATIONS
Dimensions (L x W x H) : 20.5x9.4x8.6”
521*238*218 mm
Weight : about 61.7 lbs (28 kg)
Terminal Type : M8
Terminal Torque : 80 - 100 in-lbs (9 - 11 N-m)
Case Material : ABS
Enclosure Protection : IP56
Cell Type Chemistry : Square - LiFePO4
© 2019 POOVER Battery, Phenix ltd. All rights reserved. POOVER Battery is not liable for damages that may result from any information provided in or omitted from
this publication, under any circumstances. POOVER Battery reserves the right to make adjustments to this publication at any time, without notice or obligation.
B115, Building 7, Shenzhen Bay Science and Technology Ecological Park, No. 1819 Shahe West Road, Gaoxin Community, Yuehai Street, Nanshan, Shenzhen
+86 185 8898 4662+86 186 8207 6556https://poover.tech
POOVER
DISCHARGE SPECIFICATIONS
Maximum continuous discharge current : 300A
BMS Discharge Voltage Cut-Off : 8.8V
( 2.20V±0.0625vpc@800—1300mS)
BMS Reconnect Voltage : 10.8V ( 2.7±0.075vpc)
Recommended Low Voltage Disconnect : 11V
Recommend SOC rate : 10% ~ 90%
Peak amps 10 seconds : 800A
BMS Discharge Current Cut-Off: 800-1000A(100—800ms)
Short Circuit Protection: 50—200uS
Recovery status: Automatically Recover
CHARGE SPECIFICATIONS
Recommended Charge Current：30A - 150A
Maximum charging current : 300A
Charging voltage: 14.4V
Charge voltage Balance : 14.4V (3.60±0.05V)
Charge Current Balance : 36±5mA
BMS Charge Voltage Cut-Off : 15.6V
(3.75 ± 0.025V @800—1300mS)
BMS Reconnect Voltage : 14.2V (3.55±0.05vpc)
TEMPERATURE SPECIFICATIONS
Certifications : MSDS CE (battery)
UN38.3 UL1642 & IEC62133 (cells)
TEMPERATURE SPECIFICATIONS
Discharge Temperature : -4 to 131ºF
(-20℃～+55 ℃, humidity ≤ 90%RH)
Charge Temperature : 32 to 131 ºF
( 0℃～+55°C ,humidity ≤ 90%RH)
Storage Temperature 32 to 95 ºF ( 0℃ to 35 ºC)
BMS High Temperature Cut-Off 176 ºF (80 ºC)
Reconnect Temperature 122 ºF (50 ºC)
Discharge Voltage Curve at Various Rates25℃ （ 77℉ ）
Cpacity
Volta
gtte
( vol
t )Vo
ltagtt
e ( v
olt )
Cpacity
Discharge Voltage Curve at Various Temperature
Charge Voltage | State of charge ( SOC )
Comparison Capacity at various discharge currentsPOOVER vs. LEAD ACID
Charge 0.2C @ 25℃ （77℉）Charge Voltage Curve at Various temperatures | Charge 0.2C
State of Discharge ( SOC )
Discharge 1C Rate
Volta
gtte
( vol
t )
Cpacity
Volta
gtte
( vol
t )
Rate ( A )Cycle Life ( cycles)
POOVER - LiFEPO4
FLA Battery
AGM Battery
GEL Battery
Capa
city
( Ah
)
Cycle Parameter of Charge & Discharge@ 0.5C @ 25℃ （77℉）
501 1001 1501 2001 2501 3001 3501 4001
PBLF12-300A
B115, Building 7, Shenzhen Bay Science and Technology Ecological Park, No. 1819 Shahe West Road, Gaoxin Community, Yuehai Street, Nanshan, Shenzhen
+86 185 8898 4662+86 186 8207 6556https://poover.tech
For more information, please contact [email protected]
80.00%
85.00%
90.00%
95.00%
100.00%
105.00%
MSDS
PERFORMANCE CHARACTERISTICS
POOVER
