Jandy’s Pool Link provides cost effective timing

functions in an easy to wire module that can be

added to any AquaLink RS Power Center providing

basic automation. Dual timers provide you with the

operational features you’ll need for a single speed

filter pump plus a cleaner booster pump, in-floor

cleaning system or two-speed pump operation. Dual

circuit control will provide the functionality needed to

keep the water flowing and your pool sparkling clean.

Simple to install and operate, the Pool Link is perfect

for basic automation and easily upgraded later to any

AquaLink RS advanced control system.

Bring Basic Automation toany AquaLink® RS Power Center

™

SECONDARY TIMERAutomates operation of a cleaner booster pump or two-speed filtration pump a with a simple DIP switch setting. This secondary timer allows a subset of the primary timer for energy efficient operation to keep your pool sparkling clean.

SERVICE FEATURES

FITS ANY AQUALINK RS POWER CENTERThe Pool Link Dual Timer Module fits perfectly into the low voltage area of any AquaLink RS Power Center including PureLink. Easy installation and wiring makes this an obvious choice for basic pool automation with a chlorine generation system.

The 24-hour primary timer automates start and stop times of a single speed filter pump or two-speed pump and in-floor cleaning system. This highly reliable timer is designed for 24 hour operation and is capable of multiple on/off cycles per day.

PRIMARY TIMER

Conveniently located services switches allow three modes, “Manual”, “Off’, or “Auto Mode” for ease of operation and maintenance of the pool.

Pool Link

Dual

Timer

Module

The first, simple step towards

cost effective pool automation.

ALL JANDY PRODUCTS WORK

SEAMLESSLY TOGETHER

Jandy Control Systems

manage our complete line of

technologically advanced products.

1.800.822.7933 • www.jandy.com • info@jandy.com • ©2009 Zodiac Pool Systems, Inc. SL55

11 R

ev A

2/

09

Pumps • Filters • Heaters • Heat Pumps • ControlsLights • Water Purification • Valves • Water Features

Water Leveling • Cleaners • In-Floor • Pool Covers • Accessories

The Pool Link’s primary time clock is activated

by standard pull-to-trip tabs, providing your

daily automation of filtration cycles. If you are

looking to keep your energy bills down, set your

filtration cycle to activate during non-peak hours.

Each pulled tab represents 30 minutes of pump

activation, so you can set your filtration cycles for when you want and however

long you need. Rest assured that, each and every day, the Pool Link will keep

your pool sparkling clean. With the addition of a JVA, this system will also

automate an in-floor cleaning system by rotating the JVA every 20 minutes.

In addition to controlling a single speed filter

pump, the Pool Link will activate a cleaner booster

pump through DIP switch settings. Just like

clockwork, the Pool Link dutifully performs it’s task

of keeping your pool clean every day.

If your pool uses a two-speed pump for energy

efficiency, you can activate it from the Pool Link.

Simple settings of a DIP switch will operate your pump

in low speed for energy savings then switch to high

speed when necessary.

Since life is rarely timed perfectly, overriding the Pool Link is easy. With a

simple flick of a switch, you can override your setting and provide custom

filtration to clean up after a windy storm or in advance of a pool party

with friends and family. You can also switch off your pump for scheduled

maintenance or when you need instant peace and quiet.

Freeze protection and heater connection are standard with the Pool Link

control system, as well as control of an in-floor cleaning system with the

addition of a JVA. Automation of Jandy’s PureLink water

purification system is also a benefit when partnered

with the Pool Link Module.

A clean pool is guaranteed with the Pool Link Dual Timer

Module. Let the Pool Link automate the filter pump, automatic pool cleaner cycles and in-floor cleaning systems for efficient and safe operation of your pool equipment.

Jandy’s Two-Speed Stealth Pump

Polaris® Cleaners

PrimaryFilterPump Timer

Secondary TimerService Switches

Wiring Diagram

and Operating Instructions

Fits any AquaLink RS Power Center or PureLink Power Center

When Keeping Your Pool Clean, Timing is Everything.

Specifications

Pool Link Timer Module:

The Primary time switch sets the time and duration of filtration. The Secondary time switch sets duration of cleaner booster pump or HIGH SPEED operation of two speed pumps.

Pool Link Bracket Dimensions: 5”h X 10.5”w X 2”d to mount onto AquaLink RS Power Center bracket and install into low voltage area.

Item # Power Supply:

PLINK 120 VAC, 60 Hz, 3A

High Voltage: 25A; 3HP @ 240 VAC, 1.5 HP @120 VAC, 1500 Watts IncandescentLow Voltage: Class Two, 1A @24 VAC

Pool Link Timer Module Includes:• Pool Link bracket and PCB• Primary 24 hour time clock• Secondary timer switches• Service switches for both timers• Freeze protection sensor

Required and Sold Separately:AquaLink RS Standard or Sub-Panel Power Center or PureLink Standard or Sub-Panel Power Center

Contact Rating:

SINGLE SPEED PLUS CLEANER CONTROL

EASY OVERRIDE BY DESIGN

TWO SPEED PUMP CONTROL

ADDITIONAL PROTECTION & AUTOMATION

DAY TRIPPER