About Us

Specialists in cost effective super absorbent, lineal & flocculating polymers to assist in

the management & efficient use of water, soil & pollution since 2000.

Initially producing polymers to assist local mines with day to day functions developed

into creating polymers to seal dams, assist local agriculture & reclaim pollution from

local coal mines.

Nowadays, Polymer Innovations is one of the most unique greentech companies in

Australia. Our products seal leaking dams, save water, prevent soil erosion, control

coal sludge, stabilise run-offs or maintain roads & crops.

While still maintaining the original polymers that make artificial snow, assist with

gardens, parks & landscaping or stabilising floral arrangements for your displays.

All products are manufactured at the highest quality,

environmentally friendly, biodegradable & non toxic.

Polymer Innovations is located in Singleton, NSW, Australia.

The heart of the Hunter Valley.

Pol ym e r I nno va t io ns P t y. L td .

Location: 2/129 Maison Dieu Rd Singleton NSW 2330 AUS Postal: PO Box 431 Singleton NSW 2330 AUS Phone: +61 65 715 177 Fax: +61 65 712 505 Email: info@polymerinnovations.com.au Website: www.polymerinnovations.com.au Online Store: www.polyinn.com.au

SEND TO:

Follow Us

Specialists in cost effective super absorbent, lineal & flocculating

polymers to assist the management & efficient use of water, soil &

pollution. Easy to use products that seal leaking dams, save water,

suppress dust, prevent soil erosion, control toxic pollution, stabilise

run-offs or maintain roads & crops. We also make artificial snow,

assist with gardens, parks & landscaping or even stabilise floral

arrangements for your displays.

Complete Product Catalogue 2012

Page 2

Cal l : +612 65 715 177 Emai l : in fo@polymer innovat ions.com.au

Why Polymer Innovations?

All polymer products are 100% non toxic.

Environmentally friendly & biodegradable.

Simple & easy for you to use.

Our polymers are designed to save you time & money.

High quality polymers manufactured in Australia.

Sourced from the best suppliers in the global market.

Customised solutions.

We manufacture polymers to suit your specific requirements.

Ongoing technical support.

We work with you to get the best performance from our polymers.

Material Safety Data Sheets & Technical Data Sheets available upon request.

Page 11

SAP HD Heavy Duty Absorbs large quantities of polluted water slurries present in

mining, construction, roadways & other toxic water affected areas.

SAP HD is suited for small or large scale instances of mine

reclamation of slimes, slurries or sludges to be controlled or

removed.

SAP HPF High Performance Fines Absorbs large quantities of polluted water slurries present in

mining, construction, roadways & other toxic water affected areas,

especially for the control of finer particulates.

SAP HPF contains very small polymers for quick, targeted

removals of water ingress found in very silty or fine waste.

Also well suited for dredging work

SAP HPF-P4 High Performance Fines Is a new formula that is specifically designed to target & remove

fresh or salt water affected sludges & slimes from waterways.

SAP HPF P4 is specifically designed for dredging work to remove

hydrocarbon pollution from fresh or salt waterways.

Contains very small polymers for quick, targeted removals of

water ingress found in very silty or fine waste.

Custom Have a unique problem?

We can customise an innovative polymer solution for you.

Visit : www.polymerinnovations.com.au

Page 10

Cal l : +612 65 715 177 Emai l : in fo@polymer innovat ions.com.au

Water$ave Turf Is a specific polymer formulation for Australian conditions that can

be used throughout the growth cycle of lawns & sods.

Rooting of the sod is faster, increasing growth efficiency & strike

rates. Perfect for newly laid sod, exposed lawns, drought areas &

during water restrictions. Providing long term relief for newly laid

lawns & instant relief for existing lawns.

Water$ave Medium Improves the quality & efficiency of gardens, veggie patches &

flower beds by reducing water usage & optimising water &

nutrients use by the plants. It has a large surface area per gram

that allows better distribution around the root zone.

Only a small amount of this product is required to be effective.

Providing an efficient, safe & easy to apply solution for enhancing

the growth & stability of commercial & domestic gardens.

Flora Gel Specifically designed for the cut flower & floriculturist industry to

help preserve the life of cut flowers. Flowers can be stored,

packed, transported & displayed without extra handling.

Absorbs & retains large quantities of water & nutrients, then

gradually releases the absorbed water & nutrients when required.

Flora Gel has multiple uses for the floral, function, bridal,

entertainment & hospitality industries.

D’ziner Snow Is a unique polymer bead that absorbs large amounts of water.

Once these polymer beads are expanded it refracts light in such a

way that it imitates natural ice crystals. Creating an amazing

similarity to real snow!

Snow special effects theatre, movies, TV shows, advertising,

exhibitions, displays, kids & 'Xmas in July' parties.

Transforms into sparkling white snow in minutes!

Page 3

Catalogue Contents

Dam Sealant

Water$ave Plug Page 4

Water$ave Seep Page 4

Dust Suppression

Water$ave Dust Suppression Page 4

Soil Control

Water$ave Flobind Page 4

Revegetation & Reforestation

Water$ave Plantation Page 5

Hydroseeding

Water$ave Hydro Page 5

Water$ave Hydro-Tac Page 5

Agricultural Crops

Water$ave Broadacre Page 5

Water$ave Plug & Seep Frequently Asked Questions Page 6

Water$ave Plug & Seep Frequently Asked Questions Page 7

How To Apply Water$ave Plug & Seep Dam Sealant Page 8

Water$ave Range Frequently Asked Questions Page 9

Lawns & Turfs

Water$ave Turf Page 10

Horticulture

Water$ave Medium Page 10

Cut Flower Management

Flora Gel Page 10

Artificial Snow

D’ziner Snow Page 10

Waste Water Logistics

SAP HD Heavy Duty Page 11

SAP HPF High Performance Fines Page 11

SAP HPF-P4 Page 11

Custom Polymer Solutions Page 11

About Polymer Innovations Page 12

Visit : www.polymerinnovations.com.au

Page 4

Water$ave Plug Designed for earthen dams, ponds or canals that contain soil

crevices & cracks that are generally wider than 4mm.

Plug hydrates & expands up to 300 times it's particle size.

Plug is perfect for walls & bases with soil types containing:

Granite, Slate, Shale, Gravel, Conglomerates, Boulders, Pebbles,

Exposed soils w/ holes, cracks or tunnels.

Water$ave Seep Designed for earthen dams, ponds or canals that contain soil

crevices that are generally narrower than 4mm.

Seep hydrates & expands up to 200 times it's particle size.

Seep is perfect for walls & bases with soil types containing:

Loams, High Clays, Decomposed, Granite, Sand, Basalt,

Limestone & Sandstone, Sandy Clay Loams, Black & Red Clays

Alluvium or River Soils & Volcanic Soils.

Water$ave Dust Suppression A simple, proven, economic & environmentally friendly solution to

control dust & light soil erosion. Rapidly dissolves in water carts

without gel blocking. Safe & easy to apply. Reduces water

evaporation, consumption & costs. Reduces wear & tear on

equipment.

Dust exposure for humans & animals is quickly & accurately

reduced. Non toxic, biodegradable & environmentally friendly.

Water$ave Flobind Is a special blend of polymers that has multiple uses that can be

'mixed' with other polymers for specific customisable solutions.

It is extremely versatile & gives us an even greater ability to

customise a solution for your water & pollution problems.

Whether it is used on its own or mixed with other blends our ability

to cater a solution for you is assured.

Cal l : +612 65 715 177 Emai l : in fo@polymer innovat ions.com.au

Page 9

Water$ave Range Frequently Asked Questions

What is the Water$ave Range?

Water$ave is a super absorbent polymer also known as a water retaining crystals.

They absorb & retain up to 200 - 300 times its own weight in water & nutrients.

Slowly releasing these to the root system when needed by the plant.

What is a Super Absorbent Polymer?

Super absorbent polymers are part of a group of acrylamide & Polyacrylamide polymers.

These are very long chain molecules. With super absorbent polymers the long chains are cross

linked to form a network or mesh structure. This mesh has the ability to absorb water into the

structure to swell as the water is absorbed.

Water$ave is added to the soil in such a way that it is in contact with the root structure.

During watering or irrigation, water is absorbed by Water$ave granules attached to the plant's

roots. The water is prevented from draining away & being lost.

Who should use Water$ave?

Anyone that has plants, trees, gardens, bushes, lawns, crops or any plant form that requires water

to survive.

What happens to Water$ave when it dries out?

Eventually the water will be used by the plants & Water$ave returns to its dry form.

Water$ave remains active in the soil for many years & the cycle of water absorption & release can

be repeated many times with only a slight loss in efficiency over time.

What happens when Water$ave degrades in the soil?

The effects of the UV light & bacteria in the soil gradually breaks Water$ave down to water, carbon

dioxide & nitrogen.

How long will Water$ave last for?

Water$ave in the soil will work for 3-7 years, absorbing water, nutrients & fertilizers & releasing

them as needed.

How much Water$ave do I use?

Generally, 2 teaspoons of Water$ave per plant will absorb 1litre of water, a little Water$ave will go

a long way.

You can work out how much product is needed for each Water$ave Range product by using our

online Polymer Calculators on our website.

What sizes can I purchase the Water$ave Range in?

We supply our Water$ave Range in various sizes from 140g jars to 20kg buckets or even 500kg &

1000kg bulk bags.

We can supply Water$ave from small quantities used by home gardeners through to large

quantities for farmers & large scale projects.

Is Water$ave safe?

If ingested, the acids within the stomach will start to break down the hydrated gels and the water is

released into the stomach and the crystals are passed through.

Water$ave is safe to handle, non toxic & biodegradable.

Can I just put Water$ave on top of my garden or pot plants?

Yes, however Water$ave works best at the root zone of plants. This allows the roots to tap into the

hydrated Water$ave & draw water when needed.

Water$ave is UV sensitive it will start to break down & lose its effectiveness.

Visit : www.polymerinnovations.com.au

Page 8

How To Apply Water$ave Plug & Seep Dam Sealant

If your dam has water in it & is currently leaking then now would be the best time to apply.

The pressure of the water leakage creates the suction needed to draw the hydrating polymers into

the problem areas & seal the leaks.

If you do not have any water in your dam yet. You can apply Water$ave Plug/Seep as your dam is

filling up after rain, this ensures a neat & even coverage.

If you know where the leak is then you can concentrate your application to that area. It is also

recommended that the rest of the dam be treated as well & this can be done when the dam is full

or is at least above the problem area.

Do not under apply.

Apply product at no less than the recommended rates.

For a fast leak.

Apply at 100gm/m2 . A fast leak is a noticeable reduction over

days & weeks.

For a slow leak.

Apply at 75gm/m2. A slow leak is a noticeable reduction over months.

You can work out how much product you need. By using our online Water$ave Plug & Seep Polymer Calculator on our website.

Remove any deep silt, livestock & dense reeds. They impede the polymers ability to get to the outflows.

Just sprinkle over the surface of the water.

On a quiet day with no wind or rain & when the dam is not overflowing.

Distribute it as if you are 'feeding the chickens'. At the recommended rates.

Cast out gently no more than 1.5m. By hand or fertiliser spreader from a small boat.

Be careful not to separate the blend or go through the polymer while applying to the water surface.

A boat is recommended. To make sure that the application is spread evenly all over the dam

without separating the blend.

Allow 12 - 48 hrs. To hydrate, expand & sink towards the outflows.

Then allow 2 - 10 days. Depending on the rate of leak for the polymers to start incorporating into

the soil structures.

Cal l : +612 65 715 177 Emai l : in fo@polymer innovat ions.com.au

Page 5

Water$ave Plantation Reduces the mortality rate caused by transplant stress, improves

plant establishment & also enhances water retention & root

development encouraging more rapid growth & production.

Providing an efficient, safe & easy to apply solution for enhancing

the revegetation & reforestation of cleared land.

Water$ave Hydro A specific blend of anionic cross-linked & lineal polymers to be

applied for hydroseeding or mulching operations in mountainous

areas or road embankments.

Highly effective in the young regrowth of trees, shrubs, bushes &

saplings to assist in revegetation & reforestation.

Water$ave Hydro-Tac Water$ave Hydro-Tac is a specific linear Polyacrylamide, called PAM.

Using PAM tackifiers is one best ways to hydroseed; retaining more

moisture in the mulch to keep it in place & prevents messy applications

without 'splashing'.

Water$ave Hydro-Tac is a 'stand alone' tackifier that does not

necessarily require mulch or additives.

Water$ave Broadacre Absorbs & redistributes nutrients & fertilisers to provide a buffer

for the crops water demands whilst minimising evaporation from

the soil. After irrigation the water will hold throughout the growth

cycle of the crop without any further irrigation required.

Providing important benefits to landowners & farmers to improve

yields & Increase land values.

Visit : www.polymerinnovations.com.au

Page 6

Water$ave Plug & Seep Frequently Asked Questions How does it work?

Polymer Innovations Water$ave Plug Range works by applying the dry polymer blend to the water

surface of the water catchment area.

Once the polymers come in contact with the water it creates an invisible net that carries the polymers & any solids in the water downwards towards the leaks.

The different sized polymers then start expand up to 300 times it's size & head toward the voids, cracks & crevices where the water is leaking.

These polymers create a 'plug' & continue to expand filling all holes, cracks, crevices & porous soils over the coming days & weeks. The hydrated polymers then become a part of the soil structure for decades.

Water$ave Plug Range is a blend of lineal & cross linked polymers that are 99% insoluble, non toxic & biodegradable. It will not harm any plants or animals like fish, yabbies, your pets or livestock.

This polymer is known as a Polyacrylamide. A combination of two monomers, Acrylamide & Potassium Acrylate. It’s charge density & molecular weight can be controlled by the ratio of Acrylamide & Potassium Acrylate.

This allows us to customise its charge depending on the soil to be bonded. This is known as flocculation, where soil solids are bonded into 'flocs'.

Water$ave Plug locates the leak & seals it! Even if you don't know exactly where the leak is our polymers will locate the outflows.

Note: a combination of the two blends can be used in different parts of the dam with varying earthen &

soil structures. Can it be applied to dry dams or ponds?

No, because Water$ave Plug reacts with water you need to have at least 1m depth of water in your dam to treat it.

When should I treat the dam/pond?

If your dam has water in it & is currently leaking water then now would be the best time to apply Water$ave Plug.

The pressure of the water & the leakage creates the suction needed to draw the polymers into the

problem areas. If you do not have any water in your dam yet, you can apply Water$ave Plug as your dam is filling up as this ensures a neat & even coverage.

When is best time of day to apply it?

It is best applied during a quiet morning at low wind times so the product is not blown away during application. Be sure that there is little to no wind or rain & that there is no water overflowing from the dam.

I know where the leak is. Can I apply the Water$ave Plug to that area or do I have to treat the whole dam?

Yes, if you know where the leak is then you can concentrate your application to that area but it is also recommended that the rest of the dam be treated as well & this can be done when the dam is full or is at least above the problem area.

Can I apply it to a new dam that I am building?

Yes, Water$ave Plug has been designed to apply to new as well as already constructed dams by applying it to the base & walls of the dam depending on the location of the leak.

Cal l : +612 65 715 177 Emai l : in fo@polymer innovat ions.com.au

Page 7

Water$ave Plug & Seep Frequently Asked Questions Is it safe for plants, fish & animals?

Yes, it is 100% safe to use in dams where livestock are present. Water$ave Plug is biodegradable,

non toxic & environmentally friendly.

If ingested, the acid in the stomach will start to break down the gels & the water is released into the stomach, the polymer beads are then passed through.

How much area does the 20kg pail treat?

A 20kg pail will treat 200m2 when applied at 100g/m2 for a fast leak. Or A 20kg pail will treat 267m2 when applied at 75g/m2 for a slow leak.

How much Water$ave Plug & Seep will I need?

A minimum of 100g per m2 for a fast leak or75g per m2 for a slow leak is needed.

Calculated on the surface area of your dam, depending on whether your dam is full or partially full.

You can work out how much product is needed by using our online Water$ave Plug & Seep Polymer Calculator.

I have tried liners & bentonite clay but my dam still leaks. Will it work better than bentonite?

Clients that have tried sealing their leaking dams with linings or bentonite without success have great results using Water$ave Plug.

Will my dam be sealed on first application? How many applications will I need?

In the vast majority of cases clients successfully seal their leaking dams on first application but in

some cases further application may be required.

These instances occur usually when rare, unforeseen circumstances have been encountered or there has been a lack of adequate information regarding the leak before hand.

How long will it take to work?

Allow 24 - 48 hrs to hydrate & sink towards the outflows.

Then allow 2 - 10 days depending on the rate of leak for the polymers to start incorporating into the soil structures. Some clients have had their dams sealed within a few days.

On average your dam should seal or notice a slowing down of water loss within 3-7 days! If your dam is still leaking after this time further applications could be necessary.

Will it work if my dam has weeds & livestock? Do I need to remove them first?

Weeds & livestock will inhibit the flow of the polymer into the soil.

The polymer needs a clear path to the soil, if you have any weeds, reeds, leaf, litter or deep slit, you will need to remove these before application.

Water$ave Plug & Seep is made up of different sized hydrating particles & they will be sucked into those areas.

How long will it last in the dam? Is it permanent?

Water$ave Plug under normal conditions will seal for decades. With ongoing trials we anticipate that this is a permanent solution to sealing leaks & ponds.

Does it work on all soil types?

Between the two Water$ave Plug & Seep blends, generally yes.

High levels of alkalinity, salinity or acidity may affect the product's performance however. In these rare cases the blend can be altered to suit your specific conditions.

Who has used it?

Water$ave Plug Range has been used farmers, fisheries, government departments & councils through to mining & construction companies successfully worldwide.

Visit : www.polymerinnovations.com.au