Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole...
Transcript of Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole...
![Page 1: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/1.jpg)
Pole Testing Tools Chuck Allen, August 14, 2014
![Page 2: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/2.jpg)
Pole Testing Tools
2
Klein Pole Probe
Case for Klein Pole Probe
KAM Technologies Pole Tester
![Page 3: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/3.jpg)
Features and Dimensions
3
• Workers raise the button to release the slide hammer.
Hard cover removed from pole tester
Slide hammer release button
• When the hard cover is installed, the pole tester can be handled from either end.
• KAM Technologies pole tester is 40 in. long, from tip to tip. • Klein pole probe is 15 in. long.
![Page 4: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/4.jpg)
Testing Pole with Klein Pole Probe
4
Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe to test to 6 in. depth.
![Page 5: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/5.jpg)
Testing Pole with Klein Pole Probe
5
Workers must also bend all the way over to use the pole probe.
![Page 6: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/6.jpg)
Testing Pole with KAM Technologies Pole Tester
6
• Workers hold the pole tester at a 45-degree angle, with the tip 6 in. away from the pole, and use their weight to push the tester into the ground.
• The tester has a mark 8.5 in. from the end of the tip to indicate when it has reached 6 in. below ground level.
• Most workers can also use the pole tester with minimal need to bend over.
![Page 7: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/7.jpg)
Testing Pole with KAM Technologies Pole Tester
7
If the ground is frozen or the pole is standing in water, workers can release the slide hammer and use it to drive the pole tester into the pole.
![Page 8: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/8.jpg)
Testing Pole with KAM Technologies Pole Tester
8
If the pole tester sticks into a hard pole, workers can use the slide hammer to release the pole tester and remove it in a safe, controlled manner.
![Page 9: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/9.jpg)
KAM Technologies Pole Tester: Other Uses
9
The pole tester can be used as a small ground rod driver for Servisavor® and step potential grounding.
![Page 10: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/10.jpg)
KAM Technologies Contacts
10
Mark Oostdyk • 727-519-2619 • [email protected]
Brad Dunst
• 407-221-0276 • [email protected] or [email protected]
![Page 11: Pole Testing Tools - The Source s/2017fall...Testing Pole with Klein Pole Probe 4 Because the pole probe is only 15 in. long, workers must insert almost the entire length of the probe](https://reader035.fdocuments.us/reader035/viewer/2022071215/60441c6392b7157fc85a2b58/html5/thumbnails/11.jpg)
11