Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is...

16
HAL Id: hal-00673915 https://hal.archives-ouvertes.fr/hal-00673915 Submitted on 24 Feb 2012 HAL is a multi-disciplinary open access archive for the deposit and dissemination of sci- entific research documents, whether they are pub- lished or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés. Pole Arcs Optimization of Vernier Reluctance Motors Supplied with Square Wave Current Bernard Multon, Sami Hassine, Jean-Yves Le Chenadec To cite this version: Bernard Multon, Sami Hassine, Jean-Yves Le Chenadec. Pole Arcs Optimization of Vernier Reluctance Motors Supplied with Square Wave Current. Electric Machines and Power Systems, 1993, 21, pp.695- 709. <hal-00673915>

Transcript of Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is...

Page 1: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter

HAL Id: hal-00673915https://hal.archives-ouvertes.fr/hal-00673915

Submitted on 24 Feb 2012

HAL is a multi-disciplinary open accessarchive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come fromteaching and research institutions in France orabroad, or from public or private research centers.

L’archive ouverte pluridisciplinaire HAL, estdestinée au dépôt et à la diffusion de documentsscientifiques de niveau recherche, publiés ou non,émanant des établissements d’enseignement et derecherche français ou étrangers, des laboratoirespublics ou privés.

Pole Arcs Optimization of Vernier Reluctance MotorsSupplied with Square Wave Current

Bernard Multon, Sami Hassine, Jean-Yves Le Chenadec

To cite this version:Bernard Multon, Sami Hassine, Jean-Yves Le Chenadec. Pole Arcs Optimization of Vernier ReluctanceMotors Supplied with Square Wave Current. Electric Machines and Power Systems, 1993, 21, pp.695-709. <hal-00673915>

Page 2: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 3: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 4: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 5: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 6: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 7: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 8: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 9: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 10: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 11: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 12: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 13: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 14: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 15: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter
Page 16: Pole Arcs Optimization of Vernier Reluctance Motors ... · As the sizing power of the ... is assembled with laminated steel UGINE NO 10 (0.1 mm thickness) ... One—phase basic converter