Fabric Pocket Tissue Cover! 1

1.!Cut lining fabric 6 1/2” x 8”Cut outside fabric 6 1/2” x 6”

2.!Match 6 1/2” edges of lining and sew with a 1/4” seam.

3.!Turn right side out and press the seam towards the lining fabric.

Fabric Pocket Tissue Cover! 2

4.!Fold so that the lining is on the inside and the main fabric is on the outside. Tape close to the edges.

5.!Tuck the back in just a little so that it is easier to zig-zag stitch about 1/2” from the edge towards the center. The tape holds the pieces together. You may skip this step.

5.!Turn inside out and sew a 1/4” seam along each raw edge.

Fabric Pocket Tissue Cover! 3

6.!Trim corners so the corners will lay flat when you turn it right side out.

7.!Turn right side out. Push corners out so they are square.

Press and steam lightly.

8.!Slip the tissues into the pocket. I take the plastic package off the tissues, but that isn"t necessary.