PM Titanium 2015 - HZG...(2011) and Hamilton/NZ (2013) experts on powder metallurgi-cal processing...
2
INSTITUTE OF MATERIALS RESEARCH Invitation to the 3rd Conference on Powder Processing, Consolidation and Metallurgy of Titanium PM Titanium 2015 Conference Chair Dr. Thomas Ebel, Helmholtz-Zentrum Geesthacht, Germany Prof. Florian Pyczak, Helmholtz-Zentrum Geesthacht, Germany Contact Dr. Thomas Ebel Helmholtz-Zentrum Geesthacht Centre for Materials and Coastal Research Max-Planck-Strasse 1, 21502 Geesthacht, Germany Phone: +49 4152 87 1944 Fax: +49 4152 87 1920 Email: [email protected] www.hzg.de/pmti2015 31 August - 3 September 2015 in Lüneburg / Germany 2nd Call for Papers The organization of the conference is accompanied by an international team of experts in the field of PM titanium: John E. Barnes, Melbourne, Australia PD Dr. Martin Bram, Jülich, Germany Dr. Peng Cao, Auckland, New Zealand Prof. Efraín Carreño-Morelli, Sion, Switzerland Prof. Zak Fang, Salt Lake City, USA Prof. Elena Gordo, Madrid, Spain Prof. M. Ashraf Imam, Washington D.C., USA Prof. Carolin Körner, Erlangen, Germany Dr. Ian Mellor, Rotherham, United Kingdom Prof. Hideshi Miura, Fukuoka, Japan Dr. Aamir Mukhtar, Tauranga, New Zealand Prof. Ma Qian, Melbourne, Australia Prof. Huiping Tang, Xi‘an, P.R. China Dr. David van Vuuren, Pretoria, South Africa Prof. Deliang Zhang, Shanghai, P.R. China
Transcript of PM Titanium 2015 - HZG...(2011) and Hamilton/NZ (2013) experts on powder metallurgi-cal processing...
INSTITUTE OF MATERIALS RESEARCH
Invitation to
the 3rd Conference on Powder Processing,
Consolidation and Metallurgy of Titanium
PM Titanium 2015
Conference Chair
Dr. Thomas Ebel, Helmholtz-Zentrum Geesthacht, GermanyProf. Florian Pyczak, Helmholtz-Zentrum Geesthacht, Germany
Contact
Dr. Thomas EbelHelmholtz-Zentrum GeesthachtCentre for Materials and Coastal ResearchMax-Planck-Strasse 1, 21502 Geesthacht, GermanyPhone: +49 4152 87 1944Fax: +49 4152 87 1920Email: [email protected]/pmti2015
31 August - 3 September 2015
in Lüneburg / Germany
2nd Call for Papers
The organization of the conference is accompanied by an international team of experts in the fi eld of PM titanium:
John E. Barnes, Melbourne, Australia
PD Dr. Martin Bram, Jülich, Germany
Dr. Peng Cao, Auckland, New Zealand
Prof. Efraín Carreño-Morelli, Sion, Switzerland
Prof. Zak Fang, Salt Lake City, USA
Prof. Elena Gordo, Madrid, Spain
Prof. M. Ashraf Imam, Washington D.C., USA
Prof. Carolin Körner, Erlangen, Germany
Dr. Ian Mellor, Rotherham, United Kingdom
Prof. Hideshi Miura, Fukuoka, Japan
Dr. Aamir Mukhtar, Tauranga, New Zealand
Prof. Ma Qian, Melbourne, Australia
Prof. Huiping Tang, Xi‘an, P.R. China
Dr. David van Vuuren, Pretoria, South Africa
Prof. Deliang Zhang, Shanghai, P.R. China
Following the very successful conferences in Brisbane/AUS (2011) and Hamilton/NZ (2013) experts on powder metallurgi-cal processing of titanium and titanium alloys will meet again for discussing status and progress on relevant PM Ti topics.
Venue
The conference will be hosted by the Helmholtz-Zentrum Geesthacht and will take place at the Leuphana University Lüneburg. Lüneburg is an ancient city from the Middle Ages close to Hamburg with picturesque houses, small streets and a lot of cosy cafés and pubs. Thus, it provides an optimal ambience for fruitful networking activities around the presentations.
There are excellent train connections to the city of Hamburg and its airport. On the last day of the conference there will be the possibility to visit neighbouring institutes and companies working in the fi eld of titanium powder processing.
Links
Lüneburg: www.lueneburg.infoUniversity: www.leuphana.de
Call for Abstracts
Abstracts should be submitted by using a template which can be downloaded via the conference’s website www.hzg.de/pmti2015. The content has to be related to powder metallurgy of titanium, especially to one of the following topics:
Powder productionCost reductionMicrostructureAdditive ManufacturingPM Ti alloys including TiAl
The authors of accepted abstracts will be requested to provide a ma-nuscript (between 6 to 10 pages) to be included in a dedicated volume of the periodical “Key Engineering Materials”, published by Trans Tech Publications Ltd, Switzerland. The papers will be peer-reviewed before publication. Key Engineering Materials is indexed by Web of Science and other major databases. The periodical will be available in full text online at www.scientifi c.net.
Deadlines:Deadline for abstracts: 30 April 2015Deadline for manuscripts: 28 August 2015Deadline for early bird registration: 30 June 2015
For further information about registration, schedule, accommodation and travel information, please, visit the conference’s websitewww.hzg.de/pmti2015
For questions or assistance please send an email [email protected]
INSTITUTE OF MATERIALS RESEARCH
Metal Injection Moulding Pressing, HIPOptimization of propertiesPM biomaterialsSpecifi c applications and techniques
