Plume eng com
-
Upload
petitjean-al-babtain-france -
Category
Documents
-
view
226 -
download
1
description
Transcript of Plume eng com
THE POLE AND LIGHT SOURCE ARE ONE
THE LIGHT FUNCTION IS
DIRECTLY INCORPORATED
desi
gn Y
ann
Des
forg
es©
plumeTHE ULTIMATE UNITY OF POLE AND LIGHT
PLUME
PLUME CONCEPT
THE ULTIMATE UNITY OF POLE AND LIGHTDesign Yann Desforges©
The concept for plume signals the revival and creative return of Petitjean. It has been designed in accordance with a strong idea and totally new innovation resulting from the new product developments at Petitjean. Plume evokes flexibility and lightness, gently leaning in towards our path, lighting our steps.
With Plume, the pole and the light source are one, the light function is incorporated directly into the support, diffusing a balanced, atmospheric light. Adapted to new lighting technologies, it was conceived and designed exclusively for use with LED technology. For its production phase, Petitjean will develop the light section with a specialist partner.
The Plume pole represents the public lighting of the future: intelligent, environmentally friendly aesthetic and resolutely modern.
«No head but still stylish,It lights without being bright.It leans without ever laying down.Its flat front lines our path.»
DesDesDDesDesD ignignigig YaYann nn DesDesforforgesges©
PLUME
PLUME CONCEPTAPPLICATION:Residential public lighting pole1 road lighting version, single or double bulb1 asymmetric lighting version 180° or 360°
CONFIGURATION:Average lighting height: 3.50m, 4.00m, 4.50m, 5.50mAvailable tilting angles: 0°, 5° and 10°
SOURCES :Source type: 1x or 2x 24 LEDOptical distribution system: special lenses in UV treated plasticPositioning of sources: Vertical strip
POWER SUPPLY:Electronic driver housed in the base of the poleOperational status: 70% of current-carrying capacity of LEDs
PROTECTION CLASSES:Protection class, LED strip and driver: IP 65
HEAT MANAGEMENT:LED cooling system: MCPCB circuit (aluminium alloy) affixed to an aluminium alloy heat dissipaterInternal ventilation system isolated from the poleProtection of the LEDs against overheating: integrated sensor in the strip to control the power supply
MAINTENANCE:LED strip can be changed from the front
Des
ign
Yann
Des
forg
es©
PETITJEAN COLUMNS DESIGNED AND
PRODUCED IN FRANCE
DECORATIVELIGHTING
FUNCTIONALLIGHTING
HIGH MASTLIGHTING
RENEWABLEENERGIES
PUBLICTRANSPORTATION
TRANSMISSION& DISTRIBUTION
VISIT OUR NEW WEBSITE FOR OUR DECORATIVE LIGHTING RANGE !
Petitjean designs and produces functional and decorative poles for lighting, urban transport, power distribution, telecommunications and wind turbines.
Petitjean is part of the Al-Babtain industrial group, which invests in its people, innovation and equipment, with a long-term vision. Through Petitjean, French industrial expertise is now influential on the world markets with all our products manufactured on a 36-hectare site in Troyes. At the same time, Petitjean is firmly committed to working with Troyes-based operators, despite competition from low-cost countries!
Petitjean offers a different product, one based on aesthetic innovation, the incorporation of environmental realities and the creation of a new identity to adapt to each urban, industrial or rural landscape.
www.petitjean-decoratif.fr
52 Avenue du Maréchal Leclerc CS 60010 - 10121 St André les Vergers - FRANCETél. : 33 (0) 3 25 71 32 00 • Fax : 33 (0) 3 25 71 32 90 • www.petitjean.fr • [email protected] P
rodu
ced
by: P
ETI
TJE
AN
- A
L-B
AB
TAIN
Fra
nce
SA
S -
2014
– c
opyr
ight
© A
ll rig
hts
of re
prod
uctio
n re
serv
ed.
2012/52594 2013/58081