Plumbing and Fire Fighting Sample Boq

31
Volume IV FB B.O.Q 4.2.1 SUMMARY S. NO. ITEMS A SANITARY INSTALLATION B WATER SUPPLY C DRAINAGE & SEWRAGE D NON DSR ITEM TOTAL FOR PLUMBING WORK E. FIRE FIGHTING WORK GRAND TOTAL

description

MEP

Transcript of Plumbing and Fire Fighting Sample Boq

Page 1: Plumbing and Fire Fighting Sample Boq

Volume IV FB B.O.Q

4.2.1

SUMMARY

S. NO. ITEMS AMOUNT (Rs.)

A SANITARY INSTALLATION 11,222,990.73

B WATER SUPPLY 5,249,765.61

C DRAINAGE & SEWRAGE 3,192,388.37

D NON DSR ITEM 23,811,206.77

TOTAL FOR PLUMBING WORK 43,476,351.48

E. FIRE FIGHTING WORK 33,324,424.19

GRAND TOTAL 76,800,775.67

Page 2: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.2

Description Unit Quantity Rate (Rs.) Amount (Rs.)

A. SANITARY INSTALLATION

1.00 17.3

a) 17.3.2Each 356 2765.32 984453.92

2.00 17.11

17.11.1 Size 450x300x150mm Each 90 1100.62 99055.80

3.00 17.7

a) 17.7.3

Each 166 998.64 165774.24

b) 17.7.4

Each 201 887.99 178485.99

4.00 17.31

Each 450 419.52 188784.00

5.00 17.34 Providing and fixing toilet paper holder:a) 17.34.2 Vitreous china Each 356 147.02 52339.12

Sl. No.

DSR Item No.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid ,10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I. brackets, 40mm flush bend ,overflow arrangement with specials of slandered make and mosquito proof coupling of approved municipal design complete including painting of fitting and brackets ,cutting and making good the walls and floors wherever required:

W.C. pan with ISI marked black solid plastic seat and lid.

Providing and fixing white vitreous laboratory sink with C.I. brackets ,C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass union complete including painting of fitting and brackets, cutting and making good the wall wherever required:

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm. C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

White Vitreous China Wash basin size 550x400 mm with single of 15 mm C.P. brass pillar tap.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Page 3: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.3

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

6.00 8.10

a) 8.10.1 White Agaria Marble stone sqm 31 1932.91 59920.21

7.00 17.35

a) 17.35.1 100 mm dia. b) 17.35.1.2 Centrifugally cast (spun) iron S&S pipe mtr 8500 620.72 5,276,120.00c) 17.35.2 75 mm dia. d) 17.35.2.2 Centrifugally cast (spun) iron S&S pipe mtr 2750 535.27 1,471,992.50

8.00 17.37

a) 17.37.1 For 100 mm dia pipe Each 2200 55.54 122188.00b) 17.37.2 For 75 mm dia pipe Each 440 53.54 23557.60

9.00 17.38

a) 17.38.1.2 100 mm dia IS : 3989 Each 100 247.30 24730.00

10.00 17.39

a) 17.39.1.2 100 mm dia IS : 3989 Each 250 200.90 50225.00b) 17.39.2.2 75 mm dia IS : 3989 Each 110 151.82 16700.20

11.00 17.40. Providing and fixing heel rest sanitary bend

a) 17.40.1.2 100mm dia IS : 3989 Each 220 243.35 53537.00

12.00 17.43

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 6mm nominal size) as per direction of Engineer -in - charge and finished smooth.

Providing and fixing soil, waste and vent pipes.

Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete block 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

Providing and fixing plain bend of required degree

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

Page 4: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.4

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

a) 17.43.1.2 100x100x100mm IS : 3989 Each 660 416.08 274612.80b) 17.43.2.2 75x75x75mm IS : 3989 Each 40 309.72 12388.80

13.00 17.44

17.44.1 100 x 100 x 100 mm a) 17.44.1.2 Sand cast iron S&S as per IS -3989 Each 660 375.63 247915.80

17.44.2 75 x 75x 75 mm b) 17.44.2.2 Sand cast iron S&S as per IS -3989 Each 440 283.08 124555.20

14.00 17.55

0.00 17.55.1 100mm a) 17.55.1.2 Sand cast iron S&S as per IS -3989 Each 220 252.23 55490.60

15.00 17.56 Providing and fixing terminal guarda) 17.56.1.2 100 mm IS : 3989 Each 220 165.38 36383.60b) 17.56.2.2 75 mm IS : 3989 Each 110 150.80 16588.00

16.00 17.57 Providing and fixing collara) 17.57.1.2 100 mm IS : 3989 Each 100 172.26 17226.00b) 17.57.2.2 75 mm IS : 3989 Each 60 124.16 7449.60

17.00 17.58

a) 17.58.1 100mm Each 8500 107.50 913750.00b) 17.58.2 75mm Each 3000 91.61 274830.00

18.00 17.60

a) 17.60.1.1 Each 775 462.57 358491.75

19.00 17.65

a) 17.65.1 100 mm diameter pipe Rm 5500 15.17 83435.00b) 17.65.2 75 mm diameter pipe Rm 2750 11.64 32010.00

Total of A Rs. 11,222,990.73

Providing and fixing single equal plan junction of required degree:

Providing and fixing door piece ,insertion rubber washer 3mm thick bolts & nuts complete:

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.

100 mm inlet and 100 mm outlet - IS : 3989

Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work.

Page 5: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.5

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

B. WATER SUPPLY

20.00 18.10.

Internal work - Exposed on walla) 18.10.1 15 mm dia, nominal bore Rm 200 89.96 17992.00b) 18.10.2 20 mm dia, nominal bore Rm 1000 113.75 113750.00c) 18.10.3 25 mm dia, nominal bore Rm 3500 152.67 534345.00d) 18.10.4 32 mm dia, nominal bore Rm 3000 192.15 576450.00e) 18.10.5 40 mm dia, nominal bore Rm 2880 224.40 646272.00f) 18.10.6 50 mm dia, nominal bore Rm 2500 291.41 728525.00

21.00 18.11

a) 18.11.1 15 mm dia, nominal bore mtr 5500 123.01 676,555.00b) 18.11.2 20 mm dia, nominal bore mtr 5500 144.60 795,300.00

22.00 18.12

a) 18.12.5 40mm dia nominal bore mtr 440 186.62 82,112.80

23.00 18.16 0.00

a) 18.16.2 20 mm nominal bore Each 60 199.88 11,992.800.00

24.00 18.17 0.00

0.00a) 18.17.1 25mm nominal bore Each 40 242.63 9,705.20b) 18.17.2 32mm nominal bore Each 25 304.24 7,606.00c) 18.17.3 40mm nominal bore Each 12 339.08 4,068.96d) 18.17.4 50mm nominal bore Each 20 491.37 9,827.40c) 18.17.5 65mm nominal bore Each 10 706.85 7,068.50

25.00 18.18 0.00

a) 18.18.3 25 mm nominal size Each 22 327.95 7,214.9040 mm nominal size Each 22 283.21 6,230.62

26.00 18.20 0.00

a) 18.20.3 25mm nominal bore Each 33 207.10 6,834.300.00

27.00 18.21 0.00

0.00

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc.

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (External work)

Providing & fixing brass stop cock of approved quality.

Providing & fixing gun metal gate valve with C.I. wheel of approved quality (Screw end)

Providing and fixing ball valve (brass) of approved quality, high or low pressure with plastic floats complete.

Providing & fixing brass ferrule with C.I. mouth cover including boring and tapping the main.

Providing and fixing unplasticised PVC connection pipe with brass unions.

Page 6: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.6

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

a) 18.21.1 45cm length 0.00b) 18.21.2.1 15 mm nominal bore Each 1100 47.89 52,679.00

28.00 18.52.

a) 18.52.1 15m nominal bore Each 368 223.12 82,108.160.00

29.00 18.36

Each 33 2879.79 95033.070.00

30.00 18.38. 0.00

a) 18.38.1 15 mm diameter pipe Rm 200 3.95 790.00b) 18.38.2 20 mm diameter pipe Rm 1000 4.63 4,630.00c) 18.38.3 25 mm diameter pipe Rm 2500 6.12 15,300.00d) 18.38.4 32 mm diameter pipe Rm 2000 7.22 14,440.00e) 18.38.5 40 mm diameter pipe Rm 2880 8.58 24,710.40f) 18.38.6 50 mm diameter pipe Rm 2500 10.03 25,075.00

0.0031.00 18.40. 0.00

a) 18.40.1 15 mm dia. Nominal bore mtr 4000 2.21 8,840.00b) 18.40.2 20 mm dia. Nominal bore mtr 4000 2.59 10,360.00c) 18.40.3 25mm dia. Nominal bore mtr 400 3.31 1,324.00d) 18.40.5 40 mm dia. Nominal bore mtr 220 4.42 972.40

32.00 18.41 0.00

a) 18.41.5 40 mm dia pipe Rm 440 20.14 8861.60

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS :8931.

Constructing masonry chamber 60 x 45 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4coarse sand) for fire hydrants, with C.I. surface box 350x350mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality

Providing and filling sand of grading zone V or coarse grade alround the GI pipes in external work.

Page 7: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.7

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

33.00 18.46

a) 18.46.1 15mm nominal bore Each 1000 64.50 64500.00b) 18.46.2 20 mm nominal bore Each 1000 82.26 82260.00c) 18.46.3 25 mm nominal bore Each 500 91.14 45570.00d) 18.46.4 32 mm nominal bore Each 400 105.00 42000.00e) 18.46.5 40 mm nominal bore Each 300 139.54 41862.00f) 18.46.6 50 mm nominal bore Each 200 200.22 40044.00g) 18.46.6 80 mm nominal bore Each 50 431.21 21560.50

34.00 18.53 0.00

a) 18.53.1 15 mm nominal bore Each 1100 295.45 324,995.00

Total of B Rs. 5,249,765.61

Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931

Page 8: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.8

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

C. DRAINAGE & SEWERAGE

35.00 19.1 0.00

a) 19.1.1 100 mm diameter Rm 300 90.00 27,000.00b) 19.1.2 150 mm diameter Rm 300 128.88 38,664.00c) 19.1.3 200 mm diameter Rm 1300 210.04 273,052.00

36.00 19.2 0.00

a) 19.2.1 100 mm diameter SW Pipe Rm 300 281.47 84,441.00b) 19.2.2 150 mm diameter SW Pipe Rm 300 344.23 103,269.00c) 19.2.5 250 mm diameter SW Pipe Rm 1300 401.25 521,625.00

37.00 19.4

19.4.1.1 100x100mm size P type Each 100 794.72 79472.00 0.00

38.00 19.6 0.00

a) 19.6.3 250 mm dia RCC pipe Rm 250 219.43 54857.50b) 19.6.4 300 mm dia RCC pipe Rm 930 287.88 267728.40

Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design.

Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design.

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

Page 9: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.9

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

39.00 19.9

19.9.1

19.9.1 With F.P.S. bricks class designation 75 Each 80 4192.66 335412.80

40.00 19.10

19.10.1 With F.P.S. bricks class designation 75 mtr 32 1945.91 62269.12

41.00 19.11

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centring & shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)

Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m

Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design

Page 10: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.10

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.19.11.1

19.11.1 With F.P.S. bricks class designation 75 Each 30 7602.83 228084.90

42.00 19.12

19.12.1 With F.P.S. bricks class designation 75 mtr 15 2511.05 37665.75

43.00 19.13

19.13.1

With F.P.S. bricks class designation 75 Each 12 15536.34 186436.08

44.00 19.14

1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centring shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)

Extra depth for circular type manhole 1.22m internal dia ( at bottom) beyond 1.68 m to 2.29 m

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design

2.30m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centring shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30m.

Page 11: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.11

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

With F.P.S. bricks class designation 75 mtr 8 5911.49 47291.9245.00 19.16

Each 600 155.01 93006.00

46.00 19.27

a) With F.P.S. bricks Each 30 1910.73 57321.90

47.00 2.8

2.8.1 All kind of soils. cum 1800 87.87 158166.00

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 x450mm pre -cast R.C.C. horizontal grating with frame complete as per standard design.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Page 12: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.12

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

48.00 2.10

2.10.1 All kinds of soila) 2.10.1.2

RM 3350 97.78 327563.00

49.00 2.11

a)RM 1300 130.02 169026.00

50.00 2.25

cum 700 38.84 27188.00

51.00 2.26

2.26.1 All kinds of soil. cum 800 16.06 12848.00Total for C 3,192,388.37

Excavating trenches of required width for pipes, cables etc including excavation for sockets, & dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.

Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic items for depth upto 1.5 meter)

Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited laid by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Extra for every additional lift of 1.5m or part thereof in.

Page 13: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.13

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

D. EXTRA ITEM. (Non DSR item)

1.00

a)

Each 50 2632.23 131611.50

2.00

Each 97 3609.92 350162.24

3.00

a) 15 mm nominal bore. Each 90 1880.17 169215.30

4.00

Each 50 7031.82 351591.00

5.00

Each 30 11280.99 338429.70

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100mm sand cast Iron P or S trap, 10 litre low level white vitreous china flushing cistern with manually controlled device (handle lever) conforming to IS:723, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm. C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Surgeon type Wash basin of size 660x460 mm with two nos. of 15 mm C.P. brass pillar tap with elbow operated levers ISI marked.

Providing and fixing C.P. brass sink mixer with swinging type casted spout with wall flange. (Make-Jaquar, Model -309 or approved equivalent make) including cutting and making good the walls wherever required complete as directed by Engineer in charge.

Providing and fixing Hospital bed pan sink with P trap, size 600 x 450 mm with 10 litres C.I. High level flushing cistern flush pipe, C.I./M.S. bracket painting with 3 coats of white paint complete with accessories, C.P. brass fittings with vertical jet horizontal spray complete with control cocks.

Providing and fixing stainless steel slop sink for Hospital purpose including 50mm C.P. brass mixer 40mm waste pipe etc. complete in all respect.

Page 14: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.14

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

6.00

Each 201 1128.10 226748.10

7.00

Each 200 338.43 67686.00

8.00

Each 400 206.82 82728.00

9.00

a) 32mm dia nominal bore mtr 464 97.77 45365.28b) 40mm dia nominal bore mtr 90 120.33 10829.70

10.00

a) 32mm dia nominal bore Each 464 338.43 157031.52b) 40mm dia nominal bore Each 90 413.64 37227.60

11.00

Each 12 4888.43 58661.16

12.00

100mm dia Each 12 1880.17 22562.04

13.00

Internal work - Exposed on walla) 65 mm dia, nominal bore Rm 2000 564.05 1128100.00

14.00 0.00

a) 65 mm diameter pipe Rm 2000 11.28 22,560.00

Extra for Providing and fixing 15 mm dia C.P. brass wash basin mixer in place of two pillar taps complete in all respect.

Providing and fixing C.P. brass towel rail 600x20 mm size with S.S. screws wooden cleats including necessary fittings cutting holes in wall and making good the wall wherever required.

Providing and fixing C.P. brass cast twin coat hooks fixed to wall/door with wooden cleats and S.S screws including cutting holes in wall and making good the wall wherever required.

Providing and fixing C.P. brass waste for WB /Sink including necessary fittings cutting holes in wall and making good the wall wherever required.

Providing and fixing C.P. brass bottle trap heavy pipe including necessary fittings cutting holes in wall and making good the wall wherever required.

Providing and fixing 500mm dia cast iron (Medium duty) water tank cover with frame ,double seal with lockable arrangement complete in all respects. Total weight of cover & frame to be not less than 116 kgs.

Providing and fixing 100mm dia G.I. vent pipe 1 mtr high with brass mosquito proof grating elbow with fittings.

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc.

Painting GI pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

Page 15: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.15

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

15.00

a) 32 mm nominal bore Mtr 630 383.55 241636.50b) 40 mm nominal bore Mtr 80 443.72 35497.60c) 50 mm nominal bore Mtr 330 511.40 168762.00

16.00

a) 50mm dia Each 4 413.64 1654.56b) 65mm dia Each 4 488.84 1955.36c) 80mm dia Each 4 526.45 2105.80d) 100mm dia Each 10 639.26 6392.60c) 150mm dia Each 4 940.08 3760.32

17.00

Each 600 488.84 293304.00

18.00

a) 100 mm dia Each 200 827.27 165454.00b) 150 mm dia Each 40 1203.31 48132.40

Providing and fixing G.I. (heavy class) waste pipes and fittings conforming to IS: 1239 with M.S. clamp/hook including cutting chases and holes in RCC/Brick wall/Ceilings and making good the same in cement mortar 1:3 (1 cement : 3 coarse sand) to match with the surroundings for waste from wash basins, urinals kitchen sink and sump, pump deliveries and suction etc as shown in drawings and directed by the Engineer in Charge.

Providing and fixing M.S. pipe medium duty sleeve 450 mm long ,threaded on both sides and 6mm thick M.S. plate 100 mm wide welded alround the pipes as per detail complete in all respects.

Providing and fixing 100 mm dia G.I. extension piece (Jindal Hissar make or approved equivalent make) forming a tee connection of 32/50 mm dia (Zoloto make or approved equivalent make) for connections of waste from wash basin/sink, including dripseal joint of extension piece with floor trap at one end including cutting and making good the floor and RCC wherever required complete as directed by Engineer in charge.

Providing and fixing cast brass clean out plug with suitable insert keys for opening in brass cap, male threaded joint with G.I. socket caulked to pipe/fitting of H.C.I. or C.I. (L.A.) pipe as required complete in all respects.

Page 16: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.16

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

19.00

a) 20 mm dia Mtr 1200 120.33 144396.00b) 25 mm dia Mtr 600 142.89 85734.00c) 32 mm dia Mtr 600 165.45 99270.00d) 40 mm dia Mtr 400 188.02 75208.00e) 50 mm dia Mtr 400 218.10 87240.00

20.00 0.00

a) 15 mm nominal bore Each 800 1353.72 1,082,976.00

21.00

a) Circular typeb) 100mm nominal dia, Each 1275 75.21 95892.75

22.00

Each 200 488.84 97768.00

23.00

Each 62 8272.73 512909.26

Providing and fixing 25mm thick resin bounded mineral wool pipes, painting (two coats keeping a gap of one-two days) coat of bitumastic paint, securely fixing of the sections of insulation to the pipes with all joints butted together tightly and stitching 24 SWG x 20mm mesh G.I. wire netting over the pipe section and wrapping with aluminium foil pasting on over lap and tying with G.I. 16 SWG wire. (insulation sections should have a density of 122-145 kg/cum).

Providing and fixing C.P. brass self closing bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass grating of approved quality and colour .

Providing and fixing C.P. brass pressure adjustable shower with 15-20mm inlet of approved quality.

Providing and fixing first quality white vitreous china semi stall urinal with battery operated concealed auto sensing flush valve having solenoid valve and regulator, Concealed brackets painted with two or three coats of enamel paint of approved shade over a coat of primer, G.I. heavy quality concealed flush pipe with clamps/hooks, C.P. brass spreader, 32 mm dia C.P. brass waste, 32 mm dia C.P. brass bottle trap and pipe upto wall with C.P. brass flange complete in all respects, including cutting holes in brick masonry and R.C.C. and making good the walls and floors wherever required.

Page 17: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.17

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

24.00

a) 15 mm dia Mtr 3000 82.73 248190.00b) 20 mm dia Mtr 3000 105.29 315870.00c) 25 mm dia Mtr 1500 135.37 203055.00

25.00

0.00a) 150 mm dia Mtr 1000 2030.58 2030580.00

26.00

a) 110 mm dia pipe Mtr 100 338.43 33843.00b) 160 mm dia pipe Mtr 9000 511.40 4602600.00

22.00

a) 100 mm dia pipe Each 250 60.17 15042.50b) 150 mm dia pipe Each 400 90.25 36100.00

23.00

a) 100 mm dia pipe Mtr 3000 165.45 496350.00

Providing and fixing 13 mm thick Vidoflex Insulation on hot water pipe including one layer of chicken mesh complete in all respect.

Providing and fixing centrifugal cast iron, soil, waste and vent pipes including all fittings (plain or access door) e.g. bends, junctions, cowls, offsets, access pieces etc. conforming to I.S 3989, jointing with refined pig lead joints, fixed with M.S. clamps painted with two or three coats enamel paint of approved shade over a coat of primer fixed in cement concrete 1:2:4 blocks including cutting holes in wall/floors and making good wherever required.

Providing and laying uPVC pipe 6kg/cm2 class III (IS:4984-1983) for rain water pipes including injection moulded fittings where required e.g. tees, bends, couplings and adapters and jointing with adhesive approved by fittings manufactures including necessary MS clamps of 40mmx5mm thick flat, cutting chases holes in brick & R.C.C. walls and making good the same with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished smooth.

Providing and fixing stainless steel jali (grating) with frame for waste pipe for floor/ nahani trap.

Providing and laying cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm, nominal size) 75mm thick in bed and alround soil and waste pipe under floor/vertical wall including centring and shuttering wherever required.

Page 18: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.18

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

DSR Item No.

24.00

480000 4.89 2347200.00

25.00

Set 22 319628.09 7031817.98

Total for C Rs. 23,811,206.77

Providing and placing on terrace (at all floor levels) 3 layer insulated polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the bass support for tank (Frontier, Diplass /URE or equivalent )

per litre capacity

Supply, installation, testing & commissioning of solar Water Heating System of Cap. 2000 litres. Per day consisting of ISI Marked Solar Flat Plate Collectors of Size 1860mm X 1240mm X 100mm, Laser welded of area 18.4m2. with necessary Stands, Support etc. with 1000Ltrs capacity SS - 304 hot water storage tank duly insulated with 100mm thick Glass wool / Rock wool insulation covered with polythene, chicken mesh & 24SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 9 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panel & solar hot water tank, with one no. temperature Gauge, with 03 Nos. Ball valves to produced hot water 60 to 700 on clear sunny day.

Page 19: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.19

Description Unit Quantity Rate (Rs.) Amount (Rs.)

E. FIRE FIGHTING

1.01

a)

b)

c)

d)

e)2 set 308347.10 616694.20

1.02

a)

Sl. No.

Supplying, installing, testing and commissioning of electric driven fire pump suitable for automatic operation consisting of the following (as per CPWD specification Part V-1985 for Fire Fighting and its amendments).

Fire pump with cast iron impeller horizontal split casing centrifugal suction type multistage having a capacity of 2280 ltrs/minute against a total head of 70 meters so as to ensure a minimum pressure of 3.0 kg per square cm. at the highest and farthest outlet at the specified flow complete with necessary strainer on suction side and pressure gauge on the delivery side including by pass arrangement for periodical testing of the working of the pumping set with 50mm dia G.I. pipe upto 5mtr. length & control valve. The pump shall be provided with mechanical seals.

Squirrel cage type TEFC motor suitable for operation on 415V, 3 phases 50 Hz. system of suitable HP for the above pump with synchronous speed of 1500 RPM and flexible coupling with the pump motor should conform to IS: 325-1978.

Common bed plate fabricated from mild steel channel or cast iron type.

Suitable cement concrete pump foundation & vibration damping arrangement with cushy foot mounting as required.

All coupling of pump and motor should be covered with safety guard.

Supplying, installing, testing and commissioning of diesel engine driven fire pump suitable for automatic operation consisting of the following (as per specifications.)

Horizontal centrifugal type , fire pump with cast iron impeller complete for delivery of 2280 ltrs/minute at a total head of 70 meters so as to ensure a minimum pressure of 3.0 kg per sq.cm. at the highest & farthest outlet at the specified flow, complete with necessary strainer on suction side and pressure

gauge on the delivery side etc. including by pass arrangement for periodical testing of the working of the pump set as required. The pump shall be provided with mechanical seals.

Page 20: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.20

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

b)

c)

d)

e)

f)1 set 447479.32 447479.32

1.03

a)

b)

c)

Water cooled cold starting type multi cylinder 4 stroke diesel engine, developing suitable minimum BHP at 1500 RPM for the above pump set with automatic starting mechanism, cooling system with radial cool engine, maintenance free batteries, battery charge unit, flexible coupling with the pump, fuel day tank with O/L level indicator. The tank should be cylinderical and horizontally fitted capacity 200 litres. Fuel piping and pump and vibration damping arrangement by cushy foot mounting as required complete in all respects.

Common bed plate fabricated from mild steel channel or cast iron type.

Suitable cement concrete pump foundation & vibration damping arrangement with cushy foot mounting as required.

Exhaust pipe with thermal insulation with 50mm thick Glass wool insulation and aluminium clidding 24 SWG wire around upto external wall out side the pump room are directed both engineer incharge. Complete in all respects.

All coupling of pump and motor should be covered with safety guard.

Supplying, installation, testing and commissioning of electric motor driven automatic pressurization pump set consisting of the following (as per specification)

Centrifugal pump of 180 LPM capacity capable of building up pressure lost in any leakage in the system against a total head of 70 m approx. complete with necessary strainer on suction side and pressure gauge on delivery side etc. including by-pass arrangement for testing of the working of the pumping set and with mechanical seals as required .

Squirrel cage A.C. induction motor suitable for operation on 415 V, 3 phase 50 Hz. A.C. supply and of minimum 12.5 HP for the above pump with flexible coupling as per specification and conforming to IS: 325.

Common bed plate fabricated of mild steel channel or cast iron type.

Page 21: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.21

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.d)

e)1 set 82727.27 82727.27

1.04

1 each 195537.18 195537.18

Incoming1) Switch 400A 63KA MCCB TPN 1 No.2) Voltmeter (0-500)V 1 No.3) V.S.S. 1 No.4) Indication Light 3 Nos.5) Protection Fuse and Base 3 Nos.

Outgoing Main Pump 2 set 60 HP S/D Starter (for each pump) 1) 100A TP SFU with 35KA MCCB 1 No.2) Contractor, ML -4,90/110A 2 Nos.

3) Contractor, ML -3, 90/110A 1 No.4) O/L Relay 1 No.5) Timer 0-60sec 1 No.6) Ammeter (0-200) A 1 No.7) A.S.S. 1 No.8) Current Transformer 200/5A 3 Nos.9) Indication Light 3 Nos.10) Push Button 1 Set11) Protection Fuses 3 Nos.12) Auto/Manual S.S. 1 No.13) Control Fuse 6A 1 No.14) Single phase preventer 1 Nos.15) Water level controller 1 No.

Diesel pump1) MCB 16A D.P. 1 No.2) Voltmeter DC 1 No.3) Ammeter DC 1 No.4) Indication light 5 Nos.5) Push Button 1 Set6) Hooter 24V 1 No.7) AMF Logic 1 Set

Suitable cement concrete pump foundation with vibration damping arrangement with anti-vibration pad mounting as required.

All couplings of pump & motors should be covered with safety Guard.

Fabricating, supplying, erection, testing and commissioning of cubical type floor mounted control panel complete with suitable relays, contactor, indicating lamps, fuses, instrument isolator, automatic star delta type motor starter conforming to IS 1822 and auxiliary switch including connections complete as required for 1 nos. main pumps (one for wet riser and spare space for sprinkler pump and one diesel driven stand by) and 1 no. jockey pump and one spare space for jockey pump as per CPWD specification Part V-1985 and its amendments and Local Fire Department requirements as detailed below:-

Page 22: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.22

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.8) Lock out Timer 1 No.9) Inter Locking Relay 1 Set

10) Water level controller 1 Nos.11) Low Fuel level indicator 1 No.

Page 23: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.23

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

Jockey Pump 1 set 15HP S/D Starters (for each Pump)1) 63A TP SFU with 35KA MCCB 1 No.2) Contractor 32 A ML-1.5 2 Nos.3) Contractor 32 A ML-1.0 1 No.4) O/L Relay 20-333 A MN-5 1 No.5) Timer 0-60sec 1 No.6) Ammeter 0-50 A 1 No.7) A.S.S. 1 No.8) Current Transformer 50/5A 3 Nos.9) Indication light 3 Nos.10) Push button 1 Set11) Protection Fuses 3 Nos.12) Control Fuses 6A 1 No.13) Auto/Manual S.S. 1 No.14) Auxiliary Contractor 1 No.15) Single phase preventer 1 Nos.16) Water level controller 1 Nos.

1.07

4 each 3384.30 13537.20

1.08

a) 120 sq.mm x 3.0 core 40 mtr 338.43 13537.20

b) 25 sq.mm x 3.0 core 40 mtr 244.42 9776.80

1.09

2 set 6016.53 12033.06

1.10 Providing and fixing 25mm x 5mm G.I. Strip. a) in 40mm dia GI pipe from earth electrode as required. 40 mtr 421.16 16846.40

1.11

40 mtr 45.12 1804.80

1.12150 mtr 12.03 1804.50

Supplying, testing, installation & commissioning of pressure switches for pumps including necessary wiring upto the control panel.

Supplying and laying the PVC insulated and sheathed armoured cables of 1.1 K.V. aluminum conductor including supplying and making end termination with brass compression glands.

Earthing with GI earth plate 600mm x 600mm x6mm thick including accessories and providing masonry enclousure with cover plate having locking arrangement and watering pipe etc. (including charcoal or coke and salt) complete as required.

Providing and fixing 25mmx5mm G.I. Strip on surface or in recess for earth connection etc. as required.

Providing and fixing 8swg dia GI wire on surface or recess for loop earthing as required.

Page 24: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.24

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.13

a) 150 mm dia - 5.4 mm thick 1820 mtr 1654.55 3011281.00b) 100 mm dia - 5.4 mm thick 30 mtr 1052.89 31586.70c) 80 mm dia - 4.85 mm thick 50 mtr 864.88 43244.00

1.14

a) 250 mm dia 6mm thickness 10 mtr 3158.68 31586.80

b) 200 mm dia 6mm thickness 20 mtr 2406.61 48132.20

c) 150 mm dia 5.4mm thickness 1100 mtr 1654.55 1820005.00

d) 100 mm dia 5.4mm thickness 2300 mtr 1090.50 2508150.00

e) 80 mm dia 4.85mm thickness 2700 mtr 864.88 2335176.00

f) 65 mm dia 4.50mm thickness 3000 mtr 695.66 2086980.00

g) 50 mm dia 4.50mm thickness 4000 mtr 564.05 2256200.00

h) 40 mm dia 4.05mm thickness 5400 mtr 421.16 2274264.00

i) 32 mm dia 4.05mm thickness 9000 mtr 353.47 3181230.00

j) 25 mm dia 4.04mm thickness 16000 mtr 285.79 4572640.00

Providing, fixing, jointing and testing of heavy gauge M.S. ERW black pipes as per relevant IS: 1239 with special accessories like tees, elbows, welded joints for pipe and fitting and flanged joints rubber insertion nuts & bolts, washers for valves including earth work excavating refilling compaction etc. and treating under ground pipe with two coats of anti corrosive paint and wrapping 4mm thick PYKOTE on pipe fitting etc. complete in all respects. Thrust blocks of cement concrete at bends, tees etc. 150mm thick around in 1:2:4 (1cement: 2 coarse sand: 4 stone ballast 20mm and down gauge ).

Providing, fixing, welded joints and testing of heavy class M.S. ERW black pipes as per relevant IS 1239/3580 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastner,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required.

Page 25: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.25

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.15

90 each 5640.50 507645.00

1.16

62 each 6016.53 373024.86

1.17

138 each 3910.74 539682.12

1.18

59 each 6994.21 412658.39

1.19

90 each 1955.37 175983.30

1.20

11 each 10152.89 111681.79

1.21

1 each 7144.63 7144.63

Providing and fixing single headed hydrants flanged inlet with 63 mm female instantaneous outlet of gunmetal with bolts, nuts, washers etc complete with male blank caps, chains conforming to IS:5290 type A with stainless steel orifice plate to keep the pressure not more than 3.5 kg/sq.cm at any point.

Providing 63mm (2 ½ )" dia 15 m long canvas hose pipe complete with gunmetal male & female coupling copper wire wound with the pipe The pipe shall confirm to IS. 4927

Providing 63mm (2 ½ )" dia 15 m long reinforced rubber lined hose pipe conforming to IS: 636-1992 Part-II with gunmetal male & female coupling copper wire wound with pipe as required.

Providing and fixing first aid hose reel full swinging type with 30 meter long 20mm dia rubber lined Maruty pipe with shut off nozzle of 5 mm dia. Conforming to IS:884-1969 complete/ Thermoplastic reinforced flexible hose ISI marked IS:12585 type-II Kesara Syntex Pvt. Ltd. as required. Including 25 mm dia M.S. pipe connection from riser to hose reel with all sockets, nipples, elbows and 25 mm dia ball valve as required.

Providing and fixing standard short size gunmetal branch pipe with 20mm dia nozzle conforming to IS:903. Suitable for installation connections to hose coupling etc. as required.

Providing and fixing the four way fire brigade connection housed in steel cabinet fabricated from 1.5mm thick steel sheet having lockable arrangement, openable glazed door, including painting a coat of primer and two coats of postal red enamel, necessary supports for the cabinet etc. with 150 mm dia. non return and butterfly valve complete in all respects.

Providing and fixing set of "Siamese" quadruplet instantaneous fire brigade inlet connections comprising of two gunmetal instantaneous male inlet coupling 63mm dia with plug and cap, chain bends, tees etc. for inlet to the static tank.

Page 26: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.26

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.22

31 each 8272.73 256454.63

1.23

59 each 8272.73 488091.07

1.24

17 each 10152.89 172599.13

1.25

2 each 18801.65 37603.30

1.26

a) 80 mm dia 22 each 2857.85 62872.70

b) 100 mm dia 45 each 3609.92 162446.40

c) 150 mm dia 23 each 5114.05 117623.15

d) 200 mm dia 3 each 8272.73 24818.19

Providing and fixing weather proof standard hose cabinet (900mm x 750 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5mm thick M.S. sheet having central opening glazed door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint and housing 2 Nos. canvas hose pipe and branch pipe as required. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The words “ hose cabinet” to be painted on the box.

Providing and fixing Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 1500 mm high x 1000 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “ hose cabinet” to be painted on the box.

Supplying and installing cylindrical type air vessel of 300mm dia, 1.0m high fabricated out of 8mm thick MS plate suitable for 7kg/sqcm. working pressure complete with 25mm gunmetal air release valve, safety valve, pressure gauge etc as required. The air vessel shall be continuous welded construction and painted with two coats of Postal red enamel outside over a coat of primer and Epoxy paint inside.

Supplying and installation of Fire pressure vessel of 450mm dia and 1m high fabricated from 8-10mm thick M.S. plate suitable for 10kg/sqcm. working pressure with accessories, painted with two coats of Postal red enamel outside over a coat of primer and epoxy paint inside for automatic operation of pump.

Providing and fixing cast iron body IS: 210 FG 220 and double flange simple operation type butterfly valve conforming to IS: 13095 with SS304 disc and shaft nitnile rubber replaceable seat of the following size complete with bolts, nuts, washers and rubber insertions as per specification.

Page 27: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.27

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.

d) 250 mm dia 2 each 10528.93 21057.86

1.27

a) 80 mm dia 1 each 3760.33 3760.33

b) 100 mm dia 2 each 4888.43 9776.86

c) 150 mm dia 6 each 8272.73 49636.38

1.28

1 each 7144.63 7144.63

1.29

a)290 mtr 481.32 139582.80

1.3060 each 1240.91 74454.60

1.31

a) 150 each 248.18 37227.00b) 6000 each 210.58 1263480.00

1.32

a) 2 each 218.10 436.20b) 20 each 188.02 3760.40

1.33

100 each 526.45 52645.00

1.34

5 each 394.83 1974.15

Providing and fixing non-return valve C.I. Body complete with bolts, nuts washer & rubber insertions as required conforming to IS:5312.

Providing and fixing 150 mm dia 4 way suction coupling for FB widrawal of water from the fire static tank.

Providing and fixing draining arrangement to the vertical wet risers and sprinklers at different floors.

40 mm dia M.S. Pipe heavy class conforming to IS: 1239 with fittings, clamps etc.

Providing and fixing 40 mm dia gunmetal full way valve heavy quality tested to 21kg/cm2

Providing and fixing 15 mm nominal bore quartzoid bulb type sprinkler of chromium plated, UL/FM approved ( side wall or spray type) suitable for operating on 57/68 deg. C as per requirement of local fire services.

Side wall type - 57/680CPendent type - 57/680C

Supplying 15mm nominal bore quartzoid glass bulb type (side wall or spray type) sprinkler of approved make, for temperature rating of 57/680 C.

Side wall type - 57/680CPendent type - 57/680C

Providing and fixing 20 mm nominal bore chromium plated, side wall extended through 6.5 mtr sprinkler suitable for operating on 57/68 deg. C

Supplying 20 mm nominal bore chromium plated, side wall extended through sprinkler suitable for operating on 57/68 deg. C and through of 6.5m as per requirement by local fire services.

Page 28: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.28

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.35

260 each 564.05 146653.00

1.365 each 488.84 2444.20

1.37

a) 80/100 mm 44 each 4738.02 208472.88

1.381300 mtr 45.12 58656.00

1.39

44 each 564.05 24818.20

1.40

1 each 63925.62 63925.62

1.41

1 No. alarm motor & gong (hydraulically operated)

1 No. main stop valve1 No. alarm valve.Pressure gauges drain pipe.

a) 100mm dia 6 each 39107.44 234644.64

1.42

100 each 2105.79 210579.00

1.4320 Nos. 2105.79 42115.80

1.44

a) 4.5 kg capacity cylinder 190 each 5640.50 1071695.00b) 6.8 kg capacity cylinder 8 each 8648.76 69190.08

Providing and fixing adjustable fully concealed type sprinkler operating on 57/68 deg. C of approved brand as per Local Fire Department requirement .

Supplying adjustable concealed type sprinkler operating on 57/68 deg. C.

Providing and fixing flow switch of approved make for the Sprinkler annunciation system for the sprinkler system.

Providing and fixing 2 core x 1.5 sq.mm copper conductor PVC sheathed insulated armoured cable.

Providing and fixing 0-14 kg pressure gauge of 150 mm dia including making necessary hole accessories etc.

Providing and fixing 60 zone Annunciation panel for the sprinkler system on A.C. supply with stand by battery complete in all respects.

Supplying, fixing, testing and commissioning, installation control valves comprising of :

Providing and fixing 9 liters capacity fire extinguisher water type gas pressure conforming to IS: 940 marking, fixed to wall.(ISI marked)

Providing and fixing 5 Kg dry powder or ABC extinguisher with IS: 2171. (ISI marked)

Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: marking fixed to wall as desired by Engineer-in-Charge.

Page 29: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.29

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.45

6 each 2331.40 13988.40

1.46

5 each 8272.73 41363.65

1.47

70 each 1504.13 105289.10

1.484 mtr 940.08 3760.32

1.49

40 mtr 376.03 15041.20

1.5030 each 639.26 19177.80

1.51

a) With F.P.S. bricks 30 each 4136.36 124090.80

Providing and fixing 9 litres capacity mechanical foam type IS marked conforming to Is 13386 with all accessories complete.

Providing and fixing Trolley mounted mechanical foam type 50 litres capacity without side cartridge type IS marked conforming to IS 13386 with all accessories complete.

Providing and fixing self glowing Exit sign board size 350x200mm single side painted made of luminescent safely, rigid sheet in standard colour, phot luminescent sheet made of crystals consisting mainly sulphide in protective glass like sheet green and yellow crystal luminescent (glass in dark) by action of light.

Providing 12 mm thick rubber mat 1000 mm wide of required length as required for med.voltage.

Providing and fixing M.S. floated cable tray duly painted including M.S. suspenders, anchors etc. complete in all respects.

Providing and fixing fire man axe as required with test certificate of 20000 volts.

Constructing masonry chamber 90x90x100cm, inside 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for sluice valve, with C.I. Surface box 100 mm. Top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand:10 graded stone aggregate 50 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating neat cement complete as per standard design.

Page 30: Plumbing and Fire Fighting Sample Boq

Setting up of 6 AIIMS Volume IV FB B.O.Q

Ministry of Health Family Welfare (GoI) 4.2.30

Description Unit Quantity Rate (Rs.) Amount (Rs.)Sl. No.1.52

2500 Kg 56.40 141000.00

Total Rs. 33324424.19

Providing and fixing M.S. structure work fabricated from standard sections E.g. MS squarebars, flots, rounds, angles, channels including cutting to size drilling, welding, fixing & welding to insert plates in RCC structure members as directed by site incharge, including cutting and making good the walls, floors & RCC roof (for pipe supports, clamps, M.S. ladders & manholes for tank covers etc) including painting will two or more coats of enamel joint of approved colour over a coat of approved steel primer as for drawings & direction of the site incharge.