www.danielsplows.com

844.BLU.PLOW

P L O W S

PULL PLOWPULL PLOW

(844.258.7569)

Two plows are better than one!

Incredibly Efficient

P L O W S 844-BLU-PLOW • www.danielsplows.com

The Daniels Pull Plow doesn’t replaceyour front-mounted plow - it complementsit by cleanly removing snow and ice fromthose hard-to-plow areas that your frontmounted plow simply isn’t designed toefficiently handle.

Thanks to 2,000 lbs. of downwardhydraulic pressure, residential driveways,loading dock areas and circle drives arecleared in record time - right down to thepavement! Since your snow removalactions are always done while movingforward, it’s much safer thanbackdragging snow into acrowded, busy street!

The Daniels Pull Plow fits virtuallyany 4WD vehicle equipped witha 2" receiver-type hitch.

Thanks to the patentedSPEEDHITCH™ — hook-up isfast and easy!

Simply connect the SPEEDHITCH™

to the truck’s standard 2" receiver-

type hitch and connect chain to the

truck frame.

Connect the drawbar arms to the

“ears” on the T-bar, then connect

the horizontal arm.

The entire plow assembly can be

removed from the truck in under

30 seconds, freeing the rear of

the truck for other uses.

Model Number 7201* 8001 9001 9601Plow Width 72" 80" 90" 96"

Overall Dimensions(6') (6'-8") (7'-6") (8')

Material Specifications

Weight (lbs.) 275 300 325 350

Height 19" 19" 19" 19"

Moldboard 8 gauge 8 gauge 8 gauge 8 gauge

Side plates 3/8" 3/8" 3/8" 3/8"

Draw bar arms 1" x 2" 1" x 2" 1" x 2" 1" x 2"

3/8" x 5" 3/8" x 5" 3/8" x 5" 3/8" x 5"Cutting edge - AR400

Poly version available(non-reversible)

* Limited Availability

Pull Plow Specifications

1

2

3

External HydraulicContainment Boxes arestandard for mounting thepower units with the plowat the back of the truckinstead of in the enginecompartment. TheHydraulic Containment Boxcomes supplied with a wireharness which runs to thevehicles battery and acontrol switch into the cab.Clean, contained, out ofthe way, and accessible formaintenance. Easilyinstalled and removed withthe lift assembly.Does not affect the fastand easy 1, 2, 3 Hook Up.

HYDRAULICS: ALL MODELS

CLEARANCES: ALL MODELS

Cycle time: 2.5 secondsOil capacity: 2 qts.Fluid type: Dexron Trans fluidDown pressure set at 2,000 lbs.

Rear of bumper to end of plow: 26"Maximum lift height-side plates: 12"Maximum lift height-rear of plow: 18"

Cylinder rods are black nitride treated for5x corrosion resistance and extreme durability

RECOMMENDED APPLICATION80“ - Jeep and small chassis trucks90" - 1/2 ton and full-size trucks96" - 3/4 and 1 ton trucks (dually)

Daniel’s “NEW” MountBar, pins into the 2”Reciever Hitch and issecured by attachinghooks to the truckframe.

No more welding tothe hitch. Installationtime is cut in halfwithout sacrificingstrength or the easyon and off.