PLJW Hurricane 28.21,34.21,40.21,46.21,52.21,58 · 0.5” 21.75” 17.5” 20.75” 11.5” 1.87”...
1
0.5” 21.75” 17.5” 20.75” 11.5” 1.87” 2.5” 0.5” 2.75” 17.5” 6” 6” 4 Speed -Dual motor - 6 Sone 1200 CFM High Efficiency Power Pack 4 Speed -Single motor - 5.4 Sone 600 CFM High Efficiency Power Pack 6” 21” SERIES HURRICANE PROFESSIONAL INSERT PLJW Hurricane 28.21,34.21,40.21,46.21,52.21,58.21 Available in 6 widths (28",34",40",46",52",58") Available in 3 depths, 15", 18" and 21" Timeless and Beautiful 430 Stainless Steel for Low Maintenance Simple and easy to use 4 speed controls. Available with our new High Efficiency Zero Hub, Zero Bearing, 4sp 600cfm power pack in Single Motor (600cfm) or Dual Motor (1200cfm) design. Control panel is designed for easy access and you can see and operate the insert without leaning under the insert. The Unique design which brings the control panel to the front of the Hurricane also gives customers the freedom to get creative with the slope or curve in the front of their designs without the need the need for a large "spacer piece". Extra large flange on the sides allows for larger openings, and a larger rough opening for easier installation. The Next Generation of Professional Series Custom Range Hood Inserts is available now in the ProLine Hurricane Insert Series. The Hurricane has been designed from the ground up to be easy to specify and configure, easy to install and most importantly, easy to clean, 100% Stainless Steel and Powder Coated Enamel parts, ensure that this insert will perform flawlessly for years. To specify the ProLine Inserts we use the nominal rough opening width then the Nominal Rough Opening Depth. Hurricane Models can be identified by the "width"."depth" format. So for example, if you need a 48" insert, we would recommend the Hurricane in the 46.15 or 46.18 or 46.21 models. These are 15" deep, 18" deep and 21" Deep respec- tively. Normally, if your range is a 48" Range, you would specify a 46" or a 52" insert depending on your design. We love phone calls so give us a call if you have any questions. 801.973.3959 Available in Single 600 CFM or Dual 1200 CFM Configuration 44.75” 38.75” 32.75” 26.75” 20.75” 14.75” 59.75” 53.75” 47.75” 41.75” 35.75” 29.75” 56” 50” 44” 38” 32” 26”
Transcript of PLJW Hurricane 28.21,34.21,40.21,46.21,52.21,58 · 0.5” 21.75” 17.5” 20.75” 11.5” 1.87”...
0.5”
21.75”
17.5”
20.75”
11.5”
1.87”
2.5”
0.5”
2.75”
17.5”
6”6”
4 Speed -Dual motor - 6 Sone1200 CFM High Efficiency Power Pack
4 Speed -Single motor - 5.4 Sone600 CFM High Efficiency Power Pack
6”
21” SERIES HURRICANE PROFESSIONAL INSERTPLJW Hurricane 28.21,34.21,40.21,46.21,52.21,58.21
Available in 6 widths (28",34",40",46",52",58")
Available in 3 depths, 15", 18" and 21"
Timeless and Beautiful 430 Stainless Steel for Low Maintenance
Simple and easy to use 4 speed controls.
Available with our new High Efficiency Zero Hub, Zero Bearing, 4sp 600cfm power pack in Single Motor (600cfm) or Dual Motor (1200cfm) design.
Control panel is designed for easy access and you can see and operate the insert without leaning under the insert.
The Unique design which brings the control panel to the front of the Hurricane also gives customers the freedom to get creative with the slope or curve in the front of their designs without the need the need for a large "spacer piece".
Extra large flange on the sides allows for larger openings, and a larger rough opening for easier installation.
The Next Generation of Professional Series Custom Range Hood Inserts is available now in the ProLine Hurricane Insert Series. The Hurricane has been designed from the ground up to be easy to specify and configure, easy to install and most importantly, easy to clean, 100% Stainless Steel and Powder Coated Enamel parts, ensure that this insert will perform flawlessly for years.
To specify the ProLine Inserts we use the nominal rough opening width then the Nominal Rough Opening Depth. Hurricane Models can be identified by the "width"."depth" format. So for example, if you need a 48" insert, we would recommend the Hurricane in the 46.15 or 46.18 or 46.21 models. These are 15" deep, 18" deep and 21" Deep respec-tively.
Normally, if your range is a 48" Range, you would specify a 46" or a 52" insert depending on your design.
We love phone calls so give us a call if you have any questions. 801.973.3959
Available in Single 600 CFMor Dual 1200 CFM Configuration
44.75”38.75”32.75”26.75”20.75”14.75”
59.75” 53.75” 47.75” 41.75” 35.75” 29.75”
56” 50” 44” 38” 32” 26”
![Invariant Shape Features and Relevance Feedback for Weld ... · Sym [0 1] < 0.5 > 0.5 > 0.5 < 0.5 Sig [0 1] < 0.5 < 0.5 → 1 > 0.5 2.2 Generic Fourier descriptor](https://static.fdocuments.us/doc/165x107/5fb60fbe46489e03c70e3474/invariant-shape-features-and-relevance-feedback-for-weld-sym-0-1-05.jpg)
