RT1 EVOLUTION ROOMLESS ELEVATORS4 to 13 persons

ROOMLESS ELEVATORSHIGH EFFICIENCY, ENERGY SAVING AND GEARLESS

Innovative technology. Compact gearless machine. Automatic two panel doors. 2:1 suspension.

From 300 kg - to 3975 kgSpeed: 1.00 - 1.60 m/s

For 4, 6, 8,10,13 persons.2:1 suspension.

For 4, 6, 8,10,13 persons.1:1 suspension.

For 16, 18, 20, 26 persons.2:1 suspension.

For 32, 40, 46, 53 persons.4:1 suspension.

RT1RT2RT3RT4Certification:Directive 95/16/CEEN 81-70:2004 (DDA)EN 81-1/A2:2005EN 81-1:2001EN 81-58:2004EN 81-28:2004

RT2 TRADITION ROOMLESS ELEVATORS4 to 13 persons

Highest level technologywithout the use of lubricants. High performance. Low acoustic level. 1:1 suspension.

Modular design facilities great versatilityand flexibility. Compact design and integrated components. Easy to operate products. The programmable control panelensure the highest level oftravelling comfort and exact floor leveling.

RT3 POWERED ROOMLESS ELEVATORS16 to 26 persons

RT4 PERFORMANCE ROOMLESS ELEVATORS32 to 53 persons

Excellent controllability. Innovative certified brakes. Automatic four panel doors. 2:1 suspension.

High performance and safety. Speed governor with remote control. Automatic rescue device. 4:1 suspension.

Ideal for modernization, recom-mended for roomless installations. Reduced overall dimensions, thefootprint is as narrow as the sill. Standard or mini sill executionwith place requirement or the sillreduced to 25mm for each slidinggroove. DCmotor controlled by the FOXelectronic drive, poweredwith sin-gle phase current 230 V. 1, 2, 3 and 4 panels openingrange. Built-in car door zone lockingsystem between the floors. Built-in emergency re-openingsystem. Easy setup and customization ofopening and closing profiles. Noiseless! Thanks to its uniqueHigh Performance sliding doorsshoes. Fire-rezistance certified.

HIGH EFFICIENCY AND ENERGY SAVING GERLESS The C Series and F Series are a gearless permanent magnet excited syn-chronous machines, they have simple and cost-effective installation, excel-lent controllability, lowest noise level and compact design. Gearless C Series, with 160 and 210 mm in diameter pulley are ideal forroomless installations thanks to its reduced overall dimensions. Gearless F Series, with 450 mm in diameter pulley are ideal for replace-ment of old Geared traction machines, with ropes up to 8 mm in diameter. Ideal for replacement of Geartess machines in existing MRL installationsthanks to its flattened shape and reduced overall dimensions. High efficiency, over 90%, guaranteed 30% energy-saving, 50% power ab-sorption reduction. Comfortable acceleration and deceleration movements. The height difference between lift car and landing is cancelled out. No lubricating oil, no servicing required.SPECIAL STEEL ROPES WARRINGTON 8X19W+IWRC Tested and realiable, high adaptation posibilities. Low elastic and permanent elongation, long service life.

220

478min

175 5

H

110

40

20 25115

25 50

130

50 min

17

245min

486

8x19W+IWRC