PlayMax Modem Router

8/6/2019 PlayMax Modem Router

1/38

Ur MuF7D4401au 8820au00396

Pay Maxwireless MODeM-rOuter


2/38

Table Of COnTenTs

Rgutory Iormtio 34

FCC Statement 34

Gttig strtd 1

Whats in the Box 1

Initial Setup 1Advanced Tools & Settings 6The Belkin Router Manager 7Manual Setup Using Your Browser 8Adding Computers to Your Network 9Adding USB Devices 11Bundled Software 14Additional Capabilities 16

Gttig to Kow Your Routr 17

Front Panel 17Back Panel 18

Tchic Dti 19

Technical Features 19S y s t e m R e q u i r e m e n t s 2 0

Trouhootig, support , d Wrrty 22

Troubleshooting 2 2Technical Support 30Belkin International, Inc, Limited 3-Year Product Warranty 31


3/38

1

Wht i th box

Play Max Wireless Modem-Router

ADSL cable (attached to router)

Power supply (attached to router)

Network information card (attached to router)

Belkin Setup CD with User Manual

Iiti stup

Whr to Pc Your Routr

For the best results, place the Router in an open locationaway from large metal objects and magnets such as thosefound in speakers Raising the Router above floor levelcan improve the strength of your wireless signal

GeTTInG sTaRTeD


4/38

2

GeTTInG sTaRTeD

31 2

How to st It Up


5/38

3

GeTTInG sTaRTeD

1 Connect your Routers ADSL cable to your ADSL connectionIf you are replacing an existing Router or gateway, thismay require unplugging t he existing gateway

not: If a telephone is connected to the same telephonejack then an ADSL Splitter/Filter is required Thiscan be purchased from your local retailer

2 Plug the Routers power supply into a wall outlet

3 Put the CD into your computer If t he CD doesntopen automatically, please browse to your CD driveand double-click on the Belkin Setup CD icon

4 Click the Setup icon on the CD menu

Setup


6/38

4

GeTTInG sTaRTeD

5 After a brief installation, the setup software will ask youfor the network name and password from the networkinformation card that is attached to your Router Store the

card under the base of your Router for future reference


7/38

5

GeTTInG sTaRTeD

6 A progress screen will appear while additional software isinstalled This may take a few minutes to complete Oncefinished, a Success message will appear indicating that you

are connected to the I nternet via your new Belkin Router

Durig tup you my kd or dditio iormtio

You may need to enter a username and password providedby your ISP This username and password is likely to befound on materials that came from your ISP when yousigned up for ser vice If necessary, you may need to contactyour ISP to retri eve your username and password

If you have a static IP address, you may need t o enteradditional information al so provided by your ISP

If your computer doesnt have a wireless adapter, or thesetup software is unable to control it, you may be asked toconnect your computer to the Router with a network cable

If the setup software is unable to detect your VCI and VPIsettings based on your countr y, you may also need to enterthis information Your ISP is likely to have provided it


8/38

6

GeTTInG sTaRTeD

advcd Too & sttig

After the initial setup is complete, you have the option tochange settings like your network name, security type, andpassword To make these changes and others, cli ck on theAdvanced Tools icon at the CD Setup menu and select oneof the following settings that you would like to change:

ntwork nm & scurity Personalize your network name(SSID), password, and strength of wir eless security

Itrt srvic Providr & logi sttig Haveyou moved or changed Internet Service Providers?If youd like to change these settings without running

through the setup process again, this is the place


9/38

7

GeTTInG sTaRTeD

Th bki Routr Mgr

Belkin.2234

Router Settings

User Manual

USB Print & Storage Manager

Memory Safe: Get Started!

Vuze

Daily DJ: Get Started!

Music Labeler

BitBoost: Auto

Check for UpdatesOptions

Exit

The Belkin Router Manager appears i n your system tray(Windows) or menu bar (Mac) Its icon indicates t he currentstatus of your Router and also allows you to access yourRouters settings to make changes It also provides quickaccess to software that came bundled with your Router

To access the Router settings, click on the iconand select from the menu that appears

The status of your Router is shown by the Belkin Router Managericon, which closely mimics the light on the front of the Router

Gr: You are connected to your Belkin Router

and it is connected to the Internetamr: You are connected to your Belki n Router,but it is not connected to the Internet


10/38

8

GeTTInG sTaRTeD

In your browser, type http://router (you do not need to typein anything else such as www) Then press the Enter key Ifyoure still having trouble running the manual setup option, type19216821 in your browser (you do not need to type in anythingelse such as htt p:// or www ) Then press the Enter key

Mu stup Uig Your browr


11/38

9

GeTTInG sTaRTeD

addig Computr to Your ntwork

Wireless devices such as computers, network printers, and gamingsystems can connect to your Router wit h a few simple steps

Uig th CD

1 Put the Setup CD into your computer If the CD

doesnt open automatically, browse to your CDdrive and open the Belkin Setup CD icon

2 Click the Setup icon on the CD menu

3 After a brief installation, the setup software will ask you for thenetwork name and password from the network information cardthat came with your Router This card i s most likely now locatedunderneath the foot of your Router in the provided card slot

4 A progress screen will appear while additional software isinstalled This may take a few minutes to complete Once

finished, a Success message will appear indicating that youare connected to the I nternet via your new Belkin Router

not: The setup software runs only onWindows and Mac OS X systems


12/38

10

GeTTInG sTaRTeD

Muy

If you choose not to use the included Setup CD for

adding additional computers or wireless devices, youcan manually add these items to your network

1 Locate the wireless-network-connections optionon your computer or wireless device

2 Select your Belkin Router from the list of available networks Youcan identify your Belkin Router by locating the network name(SSID) from the card located underneath the foot of your Router

3 Enter your network password (located onyour network information card)

Your wireless device will take a few moments to connect to yournetwork If the connection is not made the first time, try thisprocess again If you still have difficulty connecting to your networkafter trying this process a few times, see the Troubleshootingsection in this manual for help with connecting to your network

not: In some cases you may be prompted to sel ect thesecurity type It is printed on the card for your convenience

Uig th WPs butto

1 Start WPS Push Button Connection (WPS PBC) on your

computer or other Wi-Fi device that you would like to connectwirelessly to your Router Often there will be a button for thispurpose in software that came with the device, or a physicalWPS, PBC, or Security button on the device itself

2 Within two minutes, press t he WPS button on your Router

The WPS light (small light above WPS button) will blink green whileit listens for your Wi-Fi device Once a connection is established, thelight will turn green and then go out If a connection is not established,the light will blink amber You may repeat the process to try again

You can repeat this process for each WPS-enableddevice youd like to add to your network


13/38

11

GeTTInG sTaRTeD

addig Usb Dvic

USB


14/38

12

GeTTInG sTaRTeD

addig Driv

You can share a USB hard drive or flash drive to your network via

your Routers USB port Once connected, you can share files andmusic with other computers and devices within your network

Plug your USB hard drive into the USB port on the backof your Router When the light above the USB port is lit,your drive is available to computers on your network

You can manually check the status of your shared drive by visitingthe USB Print and Sto rage Manager, found under the Belkin RouterManager icon displayed in your system tray (Windows) or menubar (Mac) If you have difficult y sharing a drive on your net work,please see the Troubleshooting section of this manual

addig Pritr

You can add a printer to your network via your Router s

USB port Once connected, you can print from variouscomputers and wireless devices within your network

Plug your printers USB cable into the USB port located onthe back of your Router When the light above the USB port islit, your printer is available to computers on your network

You can manually check the status of your printer by visiting theUSB Print and Storage Manager, found under the Bel kin RouterManager icon displayed in your system tray (Windows) or menubar (Mac) If you have difficult y sharing a printer on your network,please see the Troubleshooting section of this manual

not: Each computer that will use the printer must haveboth the Belkin software and the printers driver installedIf the print driver is not installed, you will be asked to installit by the Belkin USB Pr int and Storage Manager


15/38

13

GeTTInG sTaRTeD

addig Othr Usb Dvic

Other USB devices may also be shared vi a your Router

Plug your device into the USB port located on the back ofyour Router When the light above the USB port is lit, yourdevice is available to computers on your network

Computers running the Belkin USB Print and Storage Manager willbe able to make use of t he shared device by visiting the USB Printand Storage Manager, found under the Belkin Router Managericon displayed in your system tray (Windows) or menu bar (Mac)


16/38

14

GeTTInG sTaRTeD

budd sotwr

Usb Prit d storg Mgr

The USB Print and Storage Manager helps to manage andmonitor the use of your USB printers, scanners, hard drives,and other devices that are connected to your Routers USBport and shared across your network USB Print and StorageManager is found in the Belk in Router Manager icon displayedin your system tray (Windows) or menu bar (Mac)

When you have one or more USB devices attached t o yourRouter, the main actions for those devices are availabledirectly from the Belkin Router Monitor menu

Mmory s

Memory Safe allows you to set up a routine backup of your

files to a hard drive or flash drive attached to your RouterMemory Safe is found in the Belkin Router Manager icondisplayed in your system tray (Windows) or menu bar (Mac)

Muic lr

Belkin Music Labeler corrects metadata (track names, artistnames, track numbers, etc) in your iTunes and Windows Medialibraries, making it easy to find the music you are looking forMusic Labeler is found under the Belkin Router Manager icon

displayed in your system tray (Windows) or menu bar (Mac)


17/38

15

GeTTInG sTaRTeD

Diy DJ

Belkin Daily DJ delivers personalized playlists from your

music collection, automatically, every day Its like having yourown personal DJ playing the song s that you want to hear Itworks great wit h iTunes and Windows Media Player DailyDJ is found under the Belkin Router Manager icon displayedin your system tray (Windows) or menu bar (Mac)

Vuz d Torrt Gi

Vuze is a media player for high-resolution digital videos thathelps you to find, download, and play HD videos on your

PC, Mac, iPhone, iPod, Xbox 360, PS3, PSP, and TiVo

Torrent Genie assists your Vuze downloads by continuing them inthe background when your computer is asleep or offline It requiresthat a USB hard drive or flash drive be plugged into your Router

bit boot

Bit Boost allows you to improve the quality of a particular activity when

your network is in heavy use For instance, if you use your network forvoice-over-IP (VoIP) calls, you can set Bit Boost to support this featurefirst and allocate the remainder of your bandwidth to other networkapplications Bit Boost is found under the Belkin Router Managericon displayed in your system tray (Windows) or menu bar (Mac)


18/38

16

GeTTInG sTaRTeD

additio Cpiiti

Gut acc

You can allow guests to use your Internet connection withoutjoining your personal network The network name andpassword for the guest network is located on the networkinformation card found under the foot of your Router

A person using your guest network will be able to joinwithout a password, but will be shown a login page whenthey attempt to surf the Web They will need to enterthe guest password into this page to continue

Vido Mx

Video Max automatically prioritizes your network traffic toensure high-quality streaming video, VoIP calls, and games

Muic Movr

Music Mover sends music from a USB drive at tached to yourRouter to any UPnP (Universal Plug-and-Play) or DLNA-compatibledevice on your network These devices include certain gamingsystems, televisions, Blu-ray players, and cell phones


19/38

17

GeTTInG TO KnOW YOUR ROUTeR

a) Routr sttu light

Your Routers status is shown by the light on the front

O: The Router is not plugged into a power source

bikig Gr: The Router is starting up

soid Gr: The Router is connected to the Internet

bikig amr: Either the RJ11 cable is notplugged in, or there is no signal

b) Wi-fi Protctd stup (WPs) light d butto

The WPS button on the front of your Router can be used tohelp establish a secure connection between your Router andother WPS-enabled Wi-Fi devices such as computers To usethe WPS feature on your Router, see Getting Started > AddingComputers to Your Network > Using the WPS Button

The small light near the WPS button shows what is happeningwhile you are using WPS to establish a connection

O: Idle

bikig Gr: The Router is listening for aWPS-enabled computer or other device

soid Gr: The Router has made a secureconnection with the computer or other device

amr: A connection was not created

frot P

()

()


20/38

18

GeTTInG TO KnOW YOUR ROUTeR

a) aDsl Coctor

Connect your Router toyour ADSL connection

b) Wird (lan) Coctor

Connect computers and otherwired network devices to theseports using Ethernet cables

C) Usb Port

USB printers, disks, and otherUSB devices plugged into thisport will be shared on yournetwork Each USB port has alight that indicates its status

O: No USB device isconnected or the attachedUSB device is not in use

bikig: Please wait tounplug the device untilthe light turns off

O: The USB device isconnected and beingshared on your network

D) Rt butto

This button is used to restartyour Router in rare cases when itfunctions incorrectly Resettingthe Router will preserve yoursettings This button may alsobe used to restore the factorydefault settings Please seethe Troubleshooting sectionfor more information

e) Powr Coctor

Connect the included powersupply to this jack

bck P

()

()

(c)

(d)

()


21/38

19

TeCHnICal DeTaIls

Tchic ftur

Itgrtd aDsl2+ ModmThe integrated ADSL2+ modem allows you to connect to theInternet via your local Internet Service Provider (ISP) withoutinstalling and maintaining a separate DSL modem

Itgrtd 80211 Wir acc Poit

Utilizing Dual-Band Network technology, your Routercreates two separate networks (one at 24GHz band andthe other at 5GHz band), allowing increased bandwidth t oall your connected wireless devices and computer s

naT IP addr shrig

To save you the cost of adding IP addresses percomputer in your house, your Belkin Router uses NetworkAddress Translation (NAT) technology, allowing you toshare a single IP address across your network

sPI firw

Your Router is equipped with a firewall that will protect yournetwork from a wide array of common attacks and viruses

Uivr Pug-d-Py (UPP) Comptiiity

The UPnP (Universal Plug-and-Play) feature in your Routeroffers seamless operation of voice and video messaging,

games, and other applications that are UPnP-compliant

W-bd advcd Ur Itrc

You can easily make changes to your Routers advancedsettings through your web browser These changes canbe made from any computer on your network

bki Routr Moitor

The Belkin Router Monitor application helps you to monitoryour Routers status and change network settings

Itgrtd 4-Port Gigit switch

Your Router has a built-in, 4-port network switch to allow yourwired computers to share: printers, data, MP3 files, digital photos,and much more at speeds of up to one gigabit per second

Du Usb Port

Two USB ports let you plug in printers, hard drives, andother USB devices to share across your network


22/38

20

TeCHnICal DeTaIls

sytm Rquirmt

Modem Router

Broadband ADSL Internet connection withRJ11 (telephone) connection

At least one computer with an installed network interface adapter

TCP/IP networking protocol installed on each computer

RJ11 ADSL telephone cable

Internet browser

stup sotwr

A computer running Windows XP SP2 or higher,Windows Vista, or Windows 7; or Mac OS X v10x

Minimum 1GHz processor and 256MB RAM

600MB of free hard-drive space for installation

Mmory s d Usb Prit d storg Mgr

Windows XP SP2 or higher or WindowsVista; or Mac OS X v104 or later

Minimum 1GHz processor and 256MB RAM



23/38

21

TeCHnICal DeTaIls

Diy DJ, Muic lr, d Vuz

PC

Windows XP SP2 or higher, Windows Vista, or Windows 7

2GHz processor

1GB of RAM

DirectX 90-compliant video and sound

Internet Explorer or Firefox

Mac

Mac OS X v1048 or later

Intel Core Duo 183GHz or higher processor

1GB of RAM

Safari or Firefox



24/38

22

TROUblesHOOTInG, sUPPORT, anD WaRRanTY

Trouhootig

Th stup CD do ot utomticy trt

If Belkin Setup does not run when you insert the CD-ROM, yourcomputer may not be configured to open CDs automatically

If Belkin Setup does not appear within 15 seconds, browseto your CD-ROM drive and open the Belkin Setup iconAlternatively, you may visit http://router/and perform thesetup manually Please see Manual Setup Using YourBrowser earlier in this manual for more information

bki stup cot id my Routr

If Belkin Setup is not able to communicate with your Router duringthe installation process, please check the following items

1 Make sure that the wireless hardware on yourcomputer is turned on, if available

2 Try connecting your computer to one of the four wiredports on the Router with an Ethernet cable

3 Ensure that the Router is on The front-panel light should be on

4 Unplug the Routers power supply for 10seconds, then plug it back in

5 There may be firewall software on your computer preventingan outgoing connection You may choose to temporarilydisable this software before attempting setup

If Belkin Setup still cannot find the Router, you might chooseto do a manual setup Refer to Manually ConfiguringNetwork Settings in this manual for details


25/38

23


bki stup cot coct my Routr to th Itrt

If Belkin Setup is not able to connect the Router tothe Internet, please check the following items:

1 Use the troubleshooting suggestions within Belkin Setup

2 If your ISP requires a user name and password, make sure thatyou have typed in your user name and password correct ly Someuser names require that the ISPs domain may be at the end of thename Example: myname@myispcom The @myispcom part ofthe user name may need to be typed as well as your user name

3 If you continue to have no Internet connection, referto Manually Configuring Network Settings in this

manual for an alternative setup method

bki stup comptd ittio, ut I cot row thW Th ight o th rot o my Routr i ikig mr

1 Make sure the Router is connected to your ADSL line with anRJ11 (telephone) cable via the Routers one gray ADSL por t

2 Check that the modem (ADSL) connection isconnected to your broadband (ADSL) socket on thewall (via an ADSL filter if one is required)

3 Unplug your Routers power supply, wait 10 seconds,and plug it back in This will cause the Router to try toreestablish communication with the ADSL line


26/38

24


I ct coct to th Itrt wiry

If the light on the front of the Router is solid green, then yourRouter is connected to t he Internet You may not be connectedto the Routers wireless network Please refer to AddingComputers to Your Network in this manual for instructions

I ct coct to th Itrt wiry d mytwork m i ot itd i avi ntwork

1 Verify that your Router is on and thefront-panel light shows solid green

2 If you are far from the Router, you might try movingcloser to see if you might have been out of range

3 Using a computer attached to the Router via a network cable,visit http://router/and ensure that Broadcast SSID is ONThis setting is found on the Channel and SSID page


27/38

25


My wir twork prormc i ow, icoitt,ur rom wk ig, or Im hvig di icuty mitiig VPn coctio

Wireless technology is radio-based, which means connectivityand the throughput performance between devicesdecreases when the distance bet ween devices increasesOther factors that will cause signal degradation (metal isgenerally the worst culprit) are obstructions such as wallsand metal appliances Note also that connection speed maydecrease as you move farther away from t he Router

In order to determine if wireless issues are related torange, we suggest temporarily moving the computerwithin 10 feet from the Router if possible

Chgig th wir chDepending on localwireless traffic and interference, switching the wirelesschannel of your network can improve performance andreliability See the section titled Changing the WirelessChannel for instructions on how to choose other channels

limitig th wir trmit rtLimiting the wireless transmitrate can help improve range and connection stability Most wirelesscards have the ability to limit the transmission rate To change thisproperty in Windows, go to the Windows Control Panel, open NetworkConnections, and double-click on your wireless cards connection Inthe properties dialog, select the Configure button on the Generaltab, then choose the Advanced tab and select the rate propert y

Wireless client cards are usually set to automatically adjustthe wireless transmit rate for you, but doing so can causeperiodic disconnects when the wireless signal is too weak; asa rule, slower transmission rates are more stable Experimentwith different connection rates until you find the best onefor your environment Note that all available transmissionrates should be acceptable for browsing the Internet For

more assistance, see your wireless card s user manual


28/38

26


Iv itd thi w Routr d om o my twork cit(computr, gm coo, tc) r ow u to coct

Your new Router came pre-configured with a network name andpassword, found printed on an attached card All clients must use thisnetwork name and password to connect wirelessly to your RouterYou will need to find the network settings on your client, select thenetwork name printed on the card from the list of available networks,and enter the password when prompted to join the wireless network

Do th Routr upport WirProtctd acc (WPa) curity?

The Router ships with WPA/WPA2 security turned onWindows XP and some older net work hardware mayrequire a software update to support WPA/WPA2

I m hvig diicuty ttig up WPa curity o my Routr

1 Log in to your Router by visiting http://router/with your web browserClick on the Login button in the top right-hand corner of thescreen You will be asked to enter your password If you have neverset a password, leave the Password field blank and click Submit

2 Click Wireless in the left-hand menu Thenclick Security just below that

3 Select the WPA/WPA2 option

4 Enter a password This can be from 863 characters of your choice,including spaces and punctuation, OR a 64- digit hexadecimalnumber (using only the numbers 09 and letters AF)


29/38

27


5 Click Apply Changes to finish Your wirelessconnection is now encr ypted Each computer using yourwireless network will need to use the new key

not: If you are configuring the Router over a wirelessconnection, you will have to re-connect to theRouter after changing any security settings

not: Some older networking hardware supportsonly WEP encryption If your older computers cannotconnect to your network, try 128-bit or 64-bit WEP, orseek software updates from their manufacturers

I m hvig diicuty ttig up Wird equivtPrivcy (WeP) curity o my Routr

1 Log in to your Router Visit http://router/ with your web browserClick on the Login button in the top right-hand corner of thescreen You will be asked to enter your password If you have neverset a password, leave the Password field blank and click Submit

2 Click Wireless in the left-hand menu Thenclick Security just below that

3 Select the 128-bit WEP option

4 You may type in a WEP key manually, or generate one froma passphrase Type a phrase in the Passphrase field andclick the Generate button A WEP key is composed of 26hexadecimal digits (09, AF For example, C3 03 0F AF4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key


30/38

28


5 Click Apply Changes to finish Your wirelessactivity is now encrypted Each computer using yourwireless network will need to use the new key

not: If you are configuring the Router over a wirelessconnection, you will have to re-connect to theRouter after changing any security settings

not: Some older networking hardware supportsonly 64-bit WEP encryption If your older computerscannot connect to your net work, try 64 -bit WEP

a dik I puggd ito th Usb port i ot howigup o my computr or i Mmory s

1 Is the light on over the USB port that the disk is plugged into?If not, try unplugging and re-plugging the disk Please checkthat the USB connector is firmly plugged into the Router

2 If your disk has an opti onal power supply, please useit while the disk is attached to your Router

3 The Router supports FAT16, FAT32-, or NTFS-formatteddisks Disks in other formats will not appear in theFinder (Mac OS X) or Windows Internet Explorer


31/38

29


a pritr I puggd ito th Usb port iot howig up o my computr

1 Is the light on over the USB port that the printer is plugged into?If not, try unplugging and re-plugging the printer Please checkthat the USB connector is firmly plugged into the Router

2 To print to a printer attached t o the Router, yourcomputer must have that printers driver installedPlease check that the driver is installed

3 The printer may not be set to auto-connect Via the Belkin RouterManager, open the USB Print and Storage Center Check that theprinter appears in the list of available devices View the propertiesof the printer, and check that auto-connect is selected

a dirt ort o Usb dvic tht I puggd ito thUsb port i ot howig up o my computr

Most USB devices other than disks and printers must beaccessed via the USB Print and Storage Center

1 Is the light on over the USB port that the device is plugged into?If not, try unplugging and re-plugging the device Please checkthat the USB connector is firmly plugged into the Router

2 Via the Belkin Router Manager, open the USBPrint and Storage Center Check that t he deviceappears in the list of available devices

3 Select the device and click the Use button The device will bevirtually connected to your computer until you choose to StopUsing the device, or another person requests use of the device


32/38

30


Tchic support

Us

http://wwwbelkincom/support

UK

http://wwwbelkincom/uk/support

autri

http://wwwbelkincom/au/support

nw Zd

http://wwwbelkincom/au/support

europ

http://wwwbelkincom/uk/support

sigpor

1800 622 1130

Myi

1 800 812 076

Idi

1800-419-5546

Thid

0018004413318

Phiippi

180014410282

Hog Kog

30021318

Chi

800 819 0159

autri

1800 235 546

nw Zd

0800 235 546

ai mi

asia-support@belkincom

Kor mi

koreasupport@belkincom


33/38

31


bki Itrtio, Ic, limitd3-Yr Product Wrrty

Wht thi wrrty covr

Belkin International, Inc (Belkin) warrants to the originalpurchaser of this Belkin product that the product shall be freeof defects in design, assembly, material, or workmanship

Wht th priod o covrg i

Belkin warrants the Belkin product for three years

Wht wi w do to corrct prom?

Product Warranty

Belkin will repair or replace, at its option, any defective productfree of charge (except for shipping charges for the product)Belkin reserves the right to discontinue any of its products withoutnotice, and disclaims any limited warranty to repair or replace anysuch discontinued products In the event that Belkin is unable torepair or replace the product (for example, because it has beendiscontinued), Belkin will offer either a refund or a credit towardthe purchase of another product from Belkincom in an amountequal to the purchase price of the product as evidenced on theoriginal purchase receipt as discounted by its natural use

Wht i ot covrd y thi wrrty?

All above warranties are null and void if the Belkin product isnot provided to Belkin for inspection upon Belkins request

at the sole expense of the purchaser, or if Belkin determinesthat the Belkin product has been improperly installed, alteredin any way, or tampered with The Belkin Product Warrantydoes not protect against acts of God such as flood, lightning,earthquake, war, vandalism, theft, normal-use wear and tear,erosion, depletion, obsolescence, abuse, damage due to lowvoltage disturbances (ie brownouts or sags), non-authorizedprogram, or system equipment modification or alteration


34/38

32


How to gt rvic

To get service for your Belkin product youmust take the following steps:

1 Contact Belkin International, Inc, at 12045 WaterfrontDrive, Los Angeles, CA 90094, Attn: Customer Service,or call (800)-223-5546, wi thin 15 days of the OccurrenceBe prepared to provide the following information:

a The part number of the Belkin product

b Where you purchased the product

c When you purchased the product

d Copy of original receipt

2 Your Belkin Customer Service Representative will then

instruct you on how to forward your receipt and Belkinproduct and how to proceed with your claim

Belkin reserves the right to review the damaged Belkin productAll costs of shipping the Belkin product to Belkin for inspectionshall be borne solely by the purchaser If Belkin determines,in its sole discretion, that it is impractical to ship the damaged

equipment to Belkin, Belkin may designate, in its sole discretion,an equipment repair facility to inspect and estimate the cost torepair such equipment The cost, i f any, of shipping the equipmentto and from such repair facility and of such estimate shall beborne solely by the purchaser Damaged equipment must remainavailable for inspection until the claim is finalized Wheneverclaims are settled, Belkin reserves the right to be subrogatedunder any existing insurance policies the purchaser may have


35/38

33


How tt w rt to th wrrty

THIS WARRANTY CONTAINS THE SOLE WARRANTY OFBELKIN THERE ARE NO OTHER WARRANTIES, EXPRESSEDOR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDINGTHE IMPLIED WARRANTY OR CONDITION OF QUALITY,MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARELIMITED IN DURATION TO THE TERM OF THIS WARRANTY

Some states do not allow limitations on how long an impliedwarranty lasts, so the above limitations may not apply to you

IN NO EVENT SHALL BELKIN BE LIABLE FOR I NCIDENTAL,SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL ORMULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,

LOST BUSINESS OR PROFITS ARISING OUT OF THESALE OR USE OF ANY BELKIN PRODUCT, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGES

This warranty gives you specific legal rights, and you may also haveother rights, which may vary from state to state Some states donot allow the exclusion or limitation of incidental, consequential,or other damages, so t he above limitations may not apply to you


36/38

34

ReGUlaTORY InfORMaTIOn

fCC sttmt

DeClaRaTIOn Of COnfORMITY WITH fCC RUles

fOR eleCTROMaGneTIC COMPaTIbIlITYWe, Belkin International, Inc, of 12045 Waterfront Drive, Los Angeles,CA 90094, declare under our sole responsibility that the device, ,f7D4401 v1, complies with Part 15 of the FCC Rules Operation issubject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation

Cutio: expour to Rdio frqucy Rditio

The device shall be used in such a manner that the potentialfor human contact normal operation is minimized

This equipment complies with FCC radiati on exposurelimits set forth for an uncontrolled environment Thisequipment should be installed and operated with a minimumdistance of 20cm bet ween the radiator and your body

fdr Commuictio Commiio notic

This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation

This equipment generates, uses, and can radiate radio frequencyenergy, and if not installed and used in accordance with theinstructions, may cause harmful interference to radio communicationsHowever, there is no guarantee that interference will not occurin a particular installation If this equipment does cause harmfulinterference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:

Reorientorrelocatethereceivingantenna. Increasethedistancebetweentheequipmentandthereceiver.

Connecttheequipmenttoanoutletonacircuitdifferentfrom that to which the receiver is connected

Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

FCC Caution: Any changes or modifications not expresslyapproved by the party responsible for compliance couldvoid the users authority to operate this equipment

This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or transmitter


37/38

35

ReGUlaTORY InfORMaTIOn

Cd-Idutry Cd (IC)

The wireless radio of this device complies with RSS139 & RSS 210 Industry Canada This Class B digitalapparatus complies with Canadian ICES-003

Operation is subject to the following t wo conditions: (1)this device may not cause interference, and (2) this devicemust accept any interference, including interferencethat may cause undesired operation of the device

Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada

europ

European Union Radio products with the CE or CE alert

marking comply wi th the R&TTE Direct ive (1999/5/EC)issued by the Commission of the European Community

Compliance with this directive implies conformityto the following European Norms (in brackets arethe equivalent international st andards)

EN60950-1:2006(IEC60950-1)ProductSafety

EN300328Technicalrequirementforradioequipment

ETS301489GeneralEMCrequirementsforradioequipment.

Iormtio

Products with the CE marking comply with the EMC Directive(2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European CommunityCompliance with these directives implies conformity tothe following European Product Family Standards

EN55022(CISPR22)ElectromagneticInterference

EN55024-1ElectromagneticImmunity

EN61000-3-2(IEC610000-3-2)PowerLineHarmonics

EN61000-3-3(IEC610000)PowerLineFlicker

EN60950-1(IEC60950-1)ProductSafety

Products that contain the radio transmitter are sometimes

labeled with the Notified Body number (CE0560) or CEalert marking if the standard used in the conformity isnot harmonized across the European Community


38/38

2010 Belkin International, Inc All rights reserved All trade names are registered trademarks of respectivemanufacturers listed Mac, Mac OS, iPhone, iPod, and Safari are trademarks of Apple Inc, registered inthe US and other countries Windows, Windows Vista, Internet Explorer, Xbox 360, and DirectX are eitherregistered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries

PlayMax Modem Router

Documents

Transcript of PlayMax Modem Router