SPECIFICATION

Note

PROD. CODE

SIZE

AGE RANGE

F/ FALL HEIGHT

HEAVIEST PART

TOTAL WEIGHT

PLAYALIVE

SPIDERPLAYALIVE-MO1

6.5 x 4.6m

6 - 15 Years

2.6m

PLAYALIVE-MO11 of 15

TUBULAR SUPPORTS Stainless (304)

CENTRAL COVER Plastic

SATELLITES The 18 watertight satellites each contain a touch sensor with lightand sound as well as a mini-computer.

NET High-grade nylon rope with the Polyfix connector system. Polyfix is safetycertified and contains no PVC.

For Installers Use Only

PLAYALIVE-MO1

2 of 15

SURFACING & WETPOUR DETAILS

59.5 sq Metres Wetpour Surfacing33.0 sq Metres 120mm Wetpour26.5 sq Metres 60mm Wetpour29.5 sq Linear Metres Wetpour Edging

100mm Wetpour

PLAYALIVE-MO1

3 of 15

400,00

900,0

0

Surfacing Details

Spacer Bar Details

Spacer Bars to be placed between thelegs to ensure the correct distancebetween the individual legs.

60mm WetpourOn Middle Legs120mm Wetpour

PLAYALIVE - MO1

4 of 15

FIN

ISH

ED

SU

RF

AC

EL

EV

EL

OVERALL DIMENSIONS

N.B

NOTE THAT DEPTH OF LEGS WILL VARY SUBJECT TO THE DESIRED SURFACE MATERIAL OF THECUSTOMER

PLAYALIVE - MO1

5 of 15

FOUNDATION DETAILS

LOWER SHELL

CENTRE PIECE

UPPER SHELL

LEG 2LEG 1

LEG 3

LEG 6

LEG 5

LEG 4

Rear Net(x1)

Side Net(x4)

OVERVIEW OF PARTS

Rear Connector Pole(X1)

Side Connector Pole(x4)Top Net

(x4)

After concreting all legs, the playarea must be fenced off with HerasFencing.The Spider can be used 24 hoursafter concreting.

Loosefill dimensions shown for Foundation Diagram.

Ø400mm

n5700mm

Ø4040mm Ø400mm

Ø550mm

Ø400mm

1500mm

PLAYALIVE - MO1

6 of 15

CONSTRUCTION OF BODY AND LEGS

THIS SIDE UP

CENTRE PIECE

Place centre piece on a stand or similarwith an exact height of 145cm

ASSEMBLY OF LEGS AND CONNECTOR POLES

Note that there are 5 configurations of the legs, therefore it is important thatthey are assembled correctly for the positioning of the nets.

14

50m

m

FRONT

1. Attach back left leg 4 by using M16 Flat Washers x2 and M16 Nuts x2 top nutshown. Copper slip must be applied to the studding prior to securing legs withM16 nuts & flat washers

PLAYALIVE - MO1

7 of 15

ASSEMBLY OF LEGS & CONNECTOR POLES, continued

2. Fix back right leg 3using M16 Flat Washersx2, M16 Nuts x2.

2.1 Attach RearConnector Pole with Type2 Connector Inserts and fixwith M4 Torx Heads.

3. Attach middle legs 2 &4 with previous method.Using one of theremaining ConnectorPoles for each side.

3.1 Fix legs with Type 1Connector Inserts and M4Torx Head Screws.Maintaining correctorientation of net fixinglugs.

4. Attach Front Legs 1 &6 with previous method.Using remaing ConnectorPoles.

4.1 Fix legs with Type 1Connector Inserts and M4Torx Head Screws.Maintaining correctorientation of net fixinglugs.

Pre drill Ø2mm

3 Lugs this side3 Lugs this side

3 Lugs this side3 Lugs this side

PLAYALIVE - MO1

8 of 15

ATTACHING NETS

5. Attach Side Nets x4 first using M6Shackles x76 as shown.

5.1 Attach Top Nets x4 with M6Shackles x28.

5.2 Attach Back Net x1 with M6Shackle x9

PLAYALIVE - M01

9 of 15

INTERNAL MOUNTING PLATE

6. Insert mounting plate into the centre ring turn 90° and attach to existing holesusing M8 x 65mm Hex Head x 4, M8 washers x 8, M8 spring washers x8 andmounting plate spacer.

CABLE CONNECTOR PLATE

6.1 Cable connetor plates can be attached to underside of the mounting platewith M8 x 25 Pent Button Head x 4, M8 Plain Washers x 4 and M8 Nyloc Nut x 4

PLAYALIVE - MO1

10 of 15

SATELLITE POSITIONS

DATA CABLE 24V

0 2 4 6 8 10 12 14

1 3 5 7 9 11 13 15

Satellite number.

DATA CABLE LENGTHS

5.5m DATA CABLE - YELLOW2.5m DATA CABLE - RED

1.0m DATA CABLE - GREEN

All satellites will be numbered and must be positioned in the correct location.Satellite i.d printed on underside of satellite.

Cable Connector Box

Note:Cables are inserted into legs prior to dispatch and left for the electrician to pull

through into the central body of the unit, for attachment to the cable connector box.

PLAYALIVE - MO1

11 of 15

CABLES INSERTED INTO LEGS

Minimum Depth Of Cable Tubes 500mm BelowSurface

DISTANCE FROM SPIDER TO POWER SUPPLY

The Max Distance From Spider To Power Supply Is 25m

Cables For Upper Satellites

Cables For Lower Satellites

Cables For Power Supply

Data Cable

Cables For Body Satellites

Female Plug

Male Plug On CableDragged Through ToThe Body Shell

Cables For Satellites OnUpper & Lower Body Shell

PLAYALIVE - MO1

12 of 15

MOUNTING OF SATELLITES IN BODY SHELL

NOTEAll Satellites Must Have Correct Orientation Of "P" Logo.

7. Attach all Lower Steel Security Covers and Top Covers to satellites using M4x 6mm Triangular Heads before positioning onto body and legs.

Note that body covers do not have bottom fixing lugs

8. Attach Inner and OuterAdapters to the Spider Body usingM5 x 16mm Cap Head Screws.

8.1 After fixing Protective covers(No Lugs) to satellite attach toouter adapter by removing theright angled fixing bracket. Usingexisting screws x3 to fix throughthe main body.

FIXING LUGS

FIXING SECURITY COVERS TO SATELLITES

TableNumber Of Lug Satellite Number Position

3 8,9,10,11,12 & 13 Upper

2 2,3,4,5,6 and 7 Lower

0 0,1,14 and 15 Body

N.B

Align internal lugs before connecting the upper & lower covers

PLAYALIVE - MO1

13 of 15

Mounting Upper And Lower Shell To Body

9. Attach lower and upper shells to centrepiece using M5 x 16mm Dome Head Screwsx 16

10. Position the Leg To BodyInfill Lug on to body then fixthrough leg using M6 Cap Head

FIXING LEG TO BODY PLASTIC INFILLS

PARTS LIST

DESCRIPTIONPART NUMBERQTYITEM

Mains Internal Plate4201-41111

Top Covers162

Bottom Leg Cover (2 Hole)63

Bottom Leg Cover (3 Hole)64

Bottom Cover Body45

M4 x 6mm Triangular Heads646

Centre RingP-MA 00217

M16 Plain WasherP-H 058128

M16 NutP-H 057129

Front Left LegP-MA 003110

Front Right LegP-MA 007111

Middle LegP-MA 004212

Rear LeftP-MA 005113

Rear RightP-MA 006114

Side Connector PoleP-MA 008415

Back Connector PoleP-MA 009116

Connector Type AP-MP 020817

Connector Type BP-MP 021218

Plastic Body To Leg InfillsP-MP 015619

M6 x 16mm Button Heads S/Tapping620

M6 Washer621

M6 Shackles11822

Side NetsP-MZ 001423

Top NetP-MZ 002424

Back NetP-MZ 003125

1m Data Cable426

2.5m Data CableP-MZ 001627

5.5m Data CableP-MZ 002628

SatellitesP-SP 001A1629

M5 x 16mm Torx Heads5030

M5 Washer838

M5 Nut837

M5 x 16mm Countersunk436

Plastic Upper BodyP-SP 003A135

Plastic Lower BodyP-H 051134

External AdaptorsP-SP 003A433

Internal AdaptorsP-H 051432

PLAYALIVE - MO1

14 of 15

REV

ECN

SIG.

DATE:

COMPILED

DATE:

Playalive-MO1

15 of 15

TE

01/09/09

PARTS LIST

DESCRIPTIONPART NUMBERQTYITEM

M4 x 16mm2033

M4 Washers2034

Copper Slip2820-71135

01591

TE01/09/09

1minor

TE18/05/10 22/01/19

MC

Minor

2

PLAYALIVE - MO1

11. INSTALLING CABINET WITH POWER OUTLET FOR PLAYALIVEPOWER SUPPLY

FOR THE ELECTRICIAN

Playalive Spider uses a 230VAC->24VDC power supply. A cabinet containing at least 1 pcs 230VAC power outletmust be installed. Ground connection must be needed. The cabinet must be installed by the customers electrician.The cabinet can be placed indoor or outdoor depending on the customers request.

IMPORTANT: When identifying the proper location of the power supply cabinet it is crucial to note that the24VDC power cable has a maximum length of 33 metres. The 33 - metre cable should cover the distancefrom the spiders head through the legs, distance in the ground and connection in the cabinet.

Typical specifications of electrical cabinet:

Dimensions: 400x400x250 ( Playalive power supply measures (mm HxWxD): 263x183x91)

Vandalism proof metal cabinet with at least 1 key lock.

At least 1 (preferable 2-3) socket with earth installed on the outlet

Optional: A timer controlling the electricity (power on/off) can be added to the cabinet. This must, however, beagreed with the customer.

12. CONNECTING THE POWER SUPPLY

The power supply is marked with part number P-SP003A. See nameplate on the power supply

1. Attach the power supply to the cabinet (Take the lid of the power supply and fasten the corners via thepre-drilled holes, Ø = 4.5mm)2. Connect the 5 pin power cable connector from Spider con box with the plug marked "CONBOX COM"3. Connect the 230 VAC IEC cable to the power supply and the power outlet in the cabinet.4. The green LED labeled "POWER" will switch on and the Spider will start

Important: The connector labeled "SERVICE" is not used during normaloperation of the Spider.

13. SERVICES, PC CONNECTION

Services and access to a PC should only be done by Play Alive trained staff.

14. ELECTRICAL SPECIFICATION

Type: Playalive SpiderInput: 100-240VAC, 50/60Hz 5.4ASecondary: 24VDC, 0-13,4 A Short circuit protectedPower Consumption: Max 240W

PLAYALIVE - MO1

TESTING & TROUBLESHOOTING

1. Testing of power supply and satellites:

1.1 Start Spider by connecting the power supply to the 230 volts.Spider is now in the "TEACH - in mode".

1.2 Test Satellites ID 02 to ID 15 for the following:Test of LEDs:

Is their light at all LED? (Visual inspection)Testing the touch sensor:

Touch the white "P" on the satellite, and listen for sounds,Keep your hand on the "P" in a few seconds and the satellite should change colour and sound.

Test Speakers:Touch the White "P" and listen to audio response.

1.3 Test satellites ID 00 to ID 15 for the following:Test of LED's:

Is Their light at all LED LED's ( visual inspection)

1.4 Test of power supply and features has now finished.

2. Testing of communication between satellites:

2.1 Start blue game (speedy)Spider is now in the play mode

2.2 Test all satellites ID 00 to ID 15 for the following:Is Their light in all LED's ( visual inspection)

Touch the white "P" on the satellite and confirm find that the light is turned offAnd a sound response can be heard

Once all satellites are touched all satellites will turn blue again.

2.3 Test of communication has now finished end.

3. Tests on restart (reboot):

3.1 Set Spider in the Teach - in mode,and start any gameSpider is now in the Play mode

3.2 Keep a hand on ID 00. After 5 seconds sounds the "restart sound" and the Spider is back in Teach in andready for game selection

3.3 Test on reboot has now finished.

4. Testing of volume control:

4.1 Set Spider in the Teach - in mode (See section 3)

4.2 Keep a hand on ID 00 and ID01 after 3 to 5 seconds sounds "volume control sound" and spider is in volumecontrol mode.

4.3 Touch ID00 and the volume will change. ID01 shows the volume choices.Test of volume control over.

TEST AND DEBUGGING TEST IS OVER.

Disposing of electrical and electronic equipment incorrectly can have anadverse effect on the environment, at the end of this equipments working life itis essential that it is disposed under the current EU approveddirective/legislation. Please dispose of this equipment with consideration tothe Waste Electronic and Electrical Equipment Regulations 2006 (WEEERegulations). If you are unsure of your requirements at the time of removingthis equipment please contact Wicksteed Playscapes for advice.