PLASTIC SHEETS FOR YOUR NEEDS DATA SHEETS - … · The consistent high quality demands from the...
Transcript of PLASTIC SHEETS FOR YOUR NEEDS DATA SHEETS - … · The consistent high quality demands from the...
DATA SHEETS
P L A S T I C S H E E T S F O R Y O U R N E E D S
MAKROCLEAR™ is transparent polycarbonate sheet.
The product is produced with vast knowledge of our
production team experienced in producing mono, co and
tri-extrusion. The product is virtually unbreakable with
extremely high impact resistance and offers high
temperature performance too.
MAKROCLEAR™ provides designers, specifiers and
architects with possibilities to use transparent
polycarbonate sheets in applications where high clarity
and optical performance is required. The consistent high
quality demands from the market helps to improve
machining, screen printability and thermoformability
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MAKROCLEAR™ TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROCLEAR™ BENEFITS:
• Good optical quality
• Half the weight of glass
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform or fabricate
• Good fire classification
APPLICATION AREAS:
MAKROCLEAR™ is the perfect solution for machining
protection, safety glazing, ice hockey rinks, vandal
protection etc. MAKROCLEAR™ thermoforms very easily
and is often used in signs, displays, riot shields,
windows, medical equipment, bicycle helmets etc.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
2050 x 3050 mm (2 – 20 mm)
Thickness range: 0,75 – 20 mm
Colour: Clear
Embossing: ICE™, TEX™, Grain 35, ANTI-REFLEX™
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROCLEAR™ TECHNICAL SPECIFICATIONS
MAKROCLEAR™ FR is flame Retardant Polycarbonate
with high clarity and surface quality. The product can be
used where fire performance is required. The product is
virtually unbreakable with extremely high impact
resistance and offers high temperature performance too.
MAKROCLEAR™ provides designers, specifiers and
architects with possibilities to use transparent
polycarbonate sheets in applications where high clarity
and optical performance is required. The consistent high
quality demands from the market helps to improve
machining, screen printability and thermoformability.
EXCELLENT FIRE PERFORMANCE complying
requirements to UL 94 V0 from 3 mm. In case of fire, the
sheet will melt and allow venting where heat and smoke
will be let out and therefore reduce the growth of fire by
flame spread.
MAKROCLEAR™ FR
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROCLEAR™ FR BENEFITS:
• UL 94 V0 FROM 3 mm
• Outstanding high clarity and surface quality
• High Impact strength
• Half the weight of glass
• Easy to thermoform or fabricate
APPLICATION AREAS:
MAKROCLEAR™ FR is the best choice where there is
a demand for improved fire properties.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 3 – 6 mm
Colour: Clear
Embossing: ICE™, TEX™, Grain 35, ANTI-REFLEX™
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
MAKROCLEAR® FR special properties
Limiting Oxygen index 35 % ISO 4589
V0 (on resin) 3 Mm UL94
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (100) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 14 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 70 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 127 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 139 °C ISO 75
Vicat temperature VST/B 120 147 °C ISO 306
Vicat temperature VST/B 50 144 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1015 Ω IEC 60093
Dielectric strength, dry 17 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROCLEAR™ FR TECHNICAL SPECIFICATIONS
MAKROCLEAR™ FA is transparent polycarbonate sheet.
The product has high clarity and surface quality ideal to
replace Glass in food contact applications. The product
is virtually unbreakable with extremely high impact
resistance and offers high temperature performance too.
MAKROCLEAR™ FA provides designers with possibilities
to use transparent polycarbonate sheets in applications
where high clarity and optical performance is required.
The consistent high quality demands from the market
helps to improve machining, screen printability and
thermoformability
MAKROCLEAR™ FA is an extruded polycarbonate sheet
made from a special resin complying with food contact
regulations governed by the US Food and Drug
Administration and EC Directive. Sawing and forming can
be performed by using the same methods as for standard
polycarbonate.
MAKROCLEAR™ FA
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROCLEAR™ FA BENEFITS:
• Food approval
• Resistance to high temperature
• Half the weight of glass
• High impact strength
• Easy to thermoform or fabricate
APPLICATION AREAS:
MAKROCLEAR™ FA is the right choice for food
packaging and applications where the product will
come in direct contact with food, such as displays
and boxes.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 0,75 – 6 mm
Colour: Clear
Embossing: ICE™, TEX™, Grain 35, ANTI-REFLEX™
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROCLEAR™ FA TECHNICAL SPECIFICATIONS
MAKROCLEAR™ SQ is Selected Quality transparent
polycarbonate sheet is produced with advanced extrusion
technology with outstanding optical and surface quality.
The product is produced with vast knowledge of our
production team experienced in producing mono, co and
tri-extrusion.
The product is virtually unbreakable with extremely high
impact resistance and offers high temperature
performance too. The product provides designers,
specifiers and architects with possibilities to use the
sheets in applications where high optical quality is
required replacing glass and other transparent plastics.
The consistent high quality demands from the market
helps to improve optical quality, machining, screen
printability and thermoformability.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MAKROCLEAR™ SQ
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROCLEAR™ SQ BENEFITS:
• High optical quality and outstanding clarity
• Half the weightc of glass
• More than 10 times the impact strength of high
impact PMMA
• Good fire classification
APPLICATION AREAS:
The selective quality properties of MAKROCLEAR™ SQ
makes it a perfect solution for glazing, machine
protection, safety glazing, ice hockey rinks, visors,
optical distortion free parts, vandal protection, sound
walls / sound barriers etc.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 2 – 12 mm
Colour: Clear
Embossing: No
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROCLEAR™ SQ TECHNICAL SPECIFICATIONS
MAKROLIFE™ is transparent polycarbonate sheet with
double sided UV-protection. The product is produced with
vast knowledge of our production team experienced in
producing mono, co and tri-extrusion. The product has a
UV protection layer guaranteed against UV radiation and
yellowing hence excellent for outdoor applications where
Glass is used. The product is virtually unbreakable with
extremely high impact resistance and offers high
temperature performance too.
MAKROLIFE™ provides designers, specifiers and
architects with possibilities to use transparent
polycarbonate sheets in applications where high clarity
and optical performance is required. The consistent high
quality demands from the market helps to improve
machining, screen printability and thermoformability.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MAKROLIFE™
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROLIFE™ BENEFITS:
• Double-sided UV-protection
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform and fabricate
• Half the weight of glass
APPLICATION AREAS:
MAKROLIFE™ is used in barrel vaults, roof lights, wide
span architectural glazing, bus shelters, poster
protection, skylights, greenhouses, covered walkways
and sport arenas. MAKROLIFE™ has set the industrial
standard in applications for vending machines, lamps,
nurseries, public telephones, stairs, soundprotections
walls and many others.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 2 – 20 mm
Colour: Clear
Embossing: ICE™, TEX™, Grain 35, ANTI-REFLEX™
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROLIFE™ TECHNICAL SPECIFICATIONS
MAKROLIFE™ SL sheet has outstanding clarity
developed to replace Glass. The product offers excellent
optical surface quality provided by the uniform and well
controlled distribution of the UV protection layer.
MAKROLIFE™ SL is virtually unbreakable with the high
impact strength Of Polycarbonate. The product offers
additional protection against UV radiation and yellowing
which is excellent for weatherable outdoor applications.
The product is half the weight of glass and offers
excellent UV Performance even after deeper
thermoforming.
MAKROLIFE™ SL
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROLIFE™ SL BENEFITS:
• Additional UV-protection
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform and fabricate
• Tailor made UV protection for thermo formers
APPLICATION AREAS:
Ski Lifts, stadia, atria, continuous glazing, cladding,
partitioning, safety and security glazing, barrel vaults,
roof lights, wide span architectural glazing, bus shelters,
poster protection, skylights, greenhouses, covered
walkways and sport arenas.
MAKROLIFE™ SL has set the industrial standard in
applications for vending machines, lamps, nurseries,
public telephones, stairs, sound protections
walls and many others.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 2 – 20 mm
Colour: Clear
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
MAKROLIFE™ SL TECHNICAL SPECIFICATIONS
COLORADO® offers a wide range of extruded
transparent coloured polycarbonate sheet. The product
is produced with vast knowledge of our production team
experienced in producing mono, co and tri-extrusion.
The product is virtually unbreakable with extremely high
impact resistance and offers high temperature
performance too.
COLORADO® provides designers, specifiers and
architects with possibilities to use transparent coloured
polycarbonate sheets in applications where high clarity
and optical performance is required.
Arla Plast AB offer a range of standard coloured tints but
also offer good colour matching service with low
minimum quantities
STOCK COLOURS:
Light Bronze 130, Grey 133, Opal 30%, Opal 50%
Standard colours: Medium Bronze 131, Dark Bronze 132,
Yellow 700, Orange 710, Red 720, Green 730, Blue 740,
DoveBlue 745, Grey/Blue 746, Glass Tint 750. Colour
matching service on request.
ALSO AVAILABLE:
COLORADO® SL, Hard Coated (scratch resistant) and
our textured surfaces.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
COLORADO®
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
COLORADO® BENEFITS:
• Wide range of transparent colours
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform or cold bend into complex shapes
• Half the weight of glass
APPLICATION AREAS:
For glazing, signs, displays, machine protection and in
other applications where a high impact strength and
good aesthetics are needed.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 2 – 12 mm
Colour: Standard colours and customer specific colours
upon request
Embossing: ICE™, TEX™, Grain 35, ANTI-
REFLEX™
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
COLORADO® TECHNICAL SPECIFICATIONS
COLORADO® LED offers a range of extruded translucent coloured polycarbonate. The product is produced with vast knowledge of our production team experienced in producing mono, co and tri-extrusion. The product is virtually unbreakable with extremely high impact resistance and offers high temperature performance too. Arla Plast AB offer a range of LED colours with diffusing properties. The product can be created with a UV protection layer guaranteed against UV radiation and yellowing hence excellent for outdoor applications COLORADO® LED provides designers, specifiers and architects with possibilities to use the LED coloured polycarbonate sheets in various applications with demands of diffusing effects and good light spreading. STANDARD COLOURS: Opal DB and Opal White. Colour matching service on request. ALSO AVAILABLE: COLORADO® LED UV and our textured surfaces. EXCELLENT FIRE PERFORMANCE complying requirements to EN 13501-1 (EUROPEAN BUILDING STD). In case of fire, the sheet will melt and allow venting where heat and smoke will be let out and therefore reduce the growth of fire by flame spread.
COLORADO® LED
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
COLORADO® LED BENEFITS:
• Excellent light spreading and hiding of the light source
• LED colours for homogenous light diffusion
• More than 10 times the impact strength of high impact
acrylic
• Easy to cold bend or thermoform into complex shapes
APPLICATION AREAS:
LED applications, lamp covers, signs, displays and in
other applications where a high impact strength and
good light spreading and diffusion are needed.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Opal LED colours: 2 - 4 mm
Colour: Opal DB, Opal White.
Customer specific colours upon request.
Embossing: Smooth, ICE™, TEX™, ANTI-REFLEX™
Special size and thickness on request.
Version 2015-11-06
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Coefficient of linear thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
Light transmittance, Lt
3 mm Opal DB 70 % ASTM D1003
3 mm Opal White 48 % ASTM D1003
COLORADO® LED TECHNICAL SPECIFICATIONS
COLORADO® UV SOLAR CONTROL sheet is developed
for applications where heat or Solar Radiation is reflected
or absorbed providing low heat build up, good light
transmission and ambiance. The Solar control product
provides heat build up protection hence used for
applications to reduce air conditioning costs.
COLORADO® UV SOLAR CONTROL has a unique
colour tint which allows the sheet to have outstanding
transparency or clarity. The surface quality is superior
due to our line capa-bilities to control the distribution of
the UV protection layer.
ALSO AVAILABLE as Saphir Colorado (Hard Coated,
scratch resistant).
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
COLORADO® UV SOLAR CONTROL
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
COLORADO® UV SOLAR CONTROL BENEFITS:
• The sheet absorbs IR heat and creates a stable
indoor climate
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform or fabricate
• Half the weight of glass
• Two sides UV as standard
APPLICATION AREAS:
Building industry roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, glasshouses,
shoppingcentre roofing, railway/metro station and stadia
roofing. Agriculture greenhouses, lorry/tractor ports and
farm/barn buildings.
DELIVERY PROGRAM:
Standard size: 2050 x 3050 mm
Thickness range: 3 – 8 mm
Colour: SG 63, SG 74, Blue, Grey and Bronze
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
Spectral properties
Light transmittance Tv
3 mm SG 63 63 % ASTM D1003
3 mm SG 74 74 % ASTM D1003
3 mm Blue 62 % ASTM D1003
3 mm Grey 62 % ASTM D1003
3 mm Bronze 68 % ASTM D1003
Total solar energy transmittance g
3 mm Grey 68 % EN 14500
3 mm Bronze 68 % EN 14500
3 mm Blue 66 % EN 14500
3 mm Green SG 63 51 % EN 14500
3 mm Green SG 74 63 % EN 14500
COLORADO®SOLAR CONTROL TECHNICAL SPECIFICATIONS
PC FROST™ is a transparent polycarbonate sheet.
The product is produced with vast knowledge of our
production team experienced in producing mono, co and
tri-extrusion. The product is virtually unbreakable with
extremely high impact resistance and offers high
temperature performance too.
PC FROST™ provides designers, specifiers and
architects with possibilities to use FROSTED
polycarbonate sheets in applications where a modern
and stylish look is required. The consistent high quality
demands from the market helps to improve machining
and thermoformability.
ALSO AVAILABLE:
In different transparent colours.
EXCELLENT FIRE PERFORMANCE. In case of fire, the
polycarbonate sheet will melt and allow venting where
heat and smoke will be let out and therefore reduce the
growth of fire by flame spread.
PC FROST™
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
PC FROST™ BENEFITS:
• Wide range of transparent colours
• More than 10 times the impact strength of high
impact PMMA
• Easy to thermoform or fabricate
• Half the weight of glass
APPLICATION AREAS:
Interior design, signs, displays and in other applications
where a high impact strength, good aesthetics and a
stylish look are needed.
DELIVERY PROGRAM:
Standard size: 2050 x 1250 mm
Thickness range: 2 – 6 mm
Colour: colours upon request
Embossing: smooth
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Thermal conductivity 0,20 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry >1014 Ω . m IEC 60093
Surface resistivity, dry 1016 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 50 Hz 3 IEC 60250
Dielectric constant, dry 1 MHz 2,9 IEC 60250
Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250
POLYCARBONATE TECHNICAL SPECIFICATIONS
SAPHIR® is hard coated polycarbonate sheet with glass
like appearance suitable for flat applications. The high
impact strength of polycarbonate is combined with
improved weather and chemical resistance. The product
offers protection against abrasion compared to standard
plastic sheets.
SAPHIR® is resistant to many of the most common
chemicals, and the hard coat also provides an excellent
protection against graffiti and vandalism.
SAPHIR® weighs about half of standard glass, yet the
product is virtually unbreakable. SAPHIR® has an
outstanding clarity, the hard coat improves the light
transmission of the polycarbonate sheet.
ALSO AVAILABLE:
Double side coating, one side coating, any transparent
colour or tint.
SAPHIR®
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
SAPHIR® BENEFITS:
• Abrasion and Impact Resistant
• Chemical Resistance
• UV Stability
• High optical quality and outstanding clarity
• More than 10 times the impact strength of high
impact PMMA
APPLICATION AREAS:
Anti-vandal glazing, security glazing, safety screens and
acoustic screens, Industrial equipment (machine
coverings, machine protections), Indoor and outdoor
signs, vending machine faces and many different kinds
of technical parts.
DELIVERY PROGRAM:
Standard size: 2000 x 3000 mm
Thickness range: 2 – 12 mm
1 side or 2 sides coated
Special sizes and thicknesses on request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Thermal conductivity 0,20 W/m.K DIN 8302
Coating properties
Adhesion GT-0 DIN 53151 / ISO 1044
Taber Abrasion, CS 10F, 500g, 100 / 500 cycles 2 / <9 % Haze ASTM D 1044
1Taberhaze: Taber abrader, 500g load, CS 10F wheels, 500 cycles
SAPHIR® TECHNICAL SPECIFICATIONS
MAKROCLEAR™ HARDCOAT is a hard coated polycarbonate transparent sheet for flat applications. The high impact strength of polycarbonate is combined with a hard coating for flat applications, improved weatherability and chemical resistance and good protection against abrasion. MAKROCLEAR™ HARDCOAT has medium optical quality and is the choice when chemical resistance, scratch resistance and impact strength are more important than high optical clarity. MAKROCLEAR™ HARDCOAT is resistant to many of the most common chemicals, and the hard coat also provides an excellent protection against vandalism as paint and ink does not stick to the coated surface. ALSO AVAILABLE: Double side coating, one side coating, any transparent colour.
MAKROCLEAR™ HARDCOAT
TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS
MAKROCLEAR™ HARDCOAT BENEFITS:
•Abrasion and Impact Resistant
•UV Stability
•Chemical resistance
•More than 10 times the impact strength of high impact acrylic
APPLICATION AREAS:
Anti-vandal glazing, security glazing, safety screens and
acoustic screens, Industrial equipment (machine covers,
machine protections), Indoor and outdoor signs, vending
machine faces and many different kinds of technical
parts.
DELIVERY PROGRAM:
Standard size: 2000 x 3000 mm
Thickness range: 3 – 20 mm
1 side or 2 sides coated
Special sizes and thicknesses on request.
Version 2015-09-05
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties*
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62
Mechanical properties*
Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus >2300 N/mm2 ISO 527
Flexural modulus >2300 N/mm2 ISO 178
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU
Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Thermal properties*
Coefficient of linear thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Thermal conductivity 0,20 W/m.K DIN 8302
Coating properties
Adhesion GT-0 ISO 1044
Taber Abrasion, CS 10F, 500g, 500 cycles <12 % Haze ASTM D 1044 1Taberhaze: Taber abrader, 500g load, CS 10F wheels, 500 cycles *Based on raw material data
MAKROCLEAR™ HARDCOAT TECHNICAL SPECIFICATIONS
Arla Plast MAKROTECH™ is a range of opaque coloured
polycarbonate sheets. The product is virtually
unbreakable with extremely high impact resistance.
The product offers high temperature performance too.
ALSO AVAILABLE IN:
• MAKROTECH™ CC for metallic colours
• MAKROTECH™ ECC for extra depth in metallic
colours
• With stripe applied for identification in packaging
industry
RECYCLING
Our total recycling concept (TRC), is a major advantage
in todays environmentally friendly market. The TRC
concept covers all types of sheets to provide you with
cost saving. Off-cuts from the sheets can be used in
production of new sheets by co-extruding virgin material
as the top layer. Care is taken that all quality
requirements are met.
MAKROTECH™
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
MAKROTECH™ BENEFITS:
• Unique metallic colours
• High impact strength
• Wide temperature range
APPLICATION AREAS:
Indoor flat, curved and formed parts in automotive,
agricultural, covers and containers.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 1,3 – 8 mm
Colours: 14 standard colours and customer specific
colours upon request
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Izod Impact, unnotched 4 mm -30 °C 10 kJ/m2 ISO 180/1U
Tensile elongation at yield (at break) 6 (100) % ISO 527
Flexural strength >90 % ISO 178
Elastic modulus 2300 MPa ISO 527
Flexural modulus 2300 MPa ISO 178
Izod notched impact strength +23 °C 60
Rockwell hardness M70 R-scale ISO 2039-2
Tensile strength at yield (at break) 60 MPa ISO 527
Izod impact strength unnotched at +23 °C NB ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,70 10-4 x K-1 ISO 2039-2
Vicat softening temperature B120 149 °C ASTM D 2220
Heat deflection temperature 132 °C DIN 53516
Fire properties
Flammability 1,6 mm HB Class UL 94
MAKROTECH™ TECHNICAL SPECIFICATIONS
Arla Plast MAKROTECH™ UV is a range of opaque
coloured polycarbonate sheets. The product is virtually
unbreakable with extremely high impact resistance. The
product offers high temperature performance too.
MAKROTECH™ UV is one side UV-protected sheet
which allows possibilities for outdoor applications.
ALSO AVAILABLE:
• Two side UV protection
• With stripe applied for identification in packaging
industry
• MAKROTECH™ CC for metallic colours
• MAKROTECH™ ECC for extra depth in metallic colours
RECYCLING
Our total recycling concept (TRC), is a major advantage
in todays environmentally friendly market. The TRC
concept covers all types of sheets to provide you with
cost saving. Off-cuts from the sheets can be used in
production of new sheets by co-extruding virgin material
as the top layer. Care is taken that all quality
requirements are met.
MAKROTECH™ UV
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
MAKROTECH™ UV BENEFITS:
• UV protected topside
• Unique metallic colours
• High impact strength
• Wide temperature range
APPLICATION AREAS:
Outdoor flat, curved and formed parts for applications in
automotive, agricultural, covers and containers, wall
cladding, signage.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 2 – 8 mm
Colours: 14 standard colours and customer specific
colours upon request
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Izod Impact, unnotched 4 mm -30 °C 10 kJ/m2 ISO 180/1U
Tensile elongation at yield (at break) % ISO 527
Flexural modulus >90 MPa ISO 178
Elastic modulus 2300 MPa ISO 527
Flexural modulus 2300 MPa ISO 178
Izod notched impact strength +23 °C 65
Rockwell hardness M70 R-scale ISO 2039-2
Tensile strength at yield (at break) 60 MPa ISO 527
Izod impact strength unnotched at +23 °C NB ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Coefficient of linear thermal expansion (23-80 °C) 0,70 10-4 x K-1 ISO 2039-2
Vicat softening temperature B120 149 °C ASTM D 2220
Heat deflection temperature 132 °C DIN 53516
Fire properties
Flammability 1,6 mm HB UL 94
MAKROTECH™ UV TECHNICAL SPECIFICATIONS
MAKROTECH™ MATT is coloured opaque polycarbonate
sheet. The product is produced with vast knowledge of
our production team experienced in producing mono, co
and tri-extrusion. The product is virtually unbreakable
with extremely high impact resistance. The product offers
high temperature performance.
MAKROTECH™ MATT provides designers, specifiers and
architects with possibilities to use opaque polycarbonate
sheets in applications where matt surface adds value and
also provides the classy look.
RECYCLING.
Our total recycling concept (TRC), is a major advantage
in todays environmentally friendly market. The TRC
concept covers all types of sheets to provide you with
cost saving. Off-cuts from the sheets can be used in
production of new sheets by co-extruding virgin material
as the top layer. Care is taken that all quality
requirements are met.
MAKROTECH™ MATT
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
MAKROTECH™ MATT BENEFITS:
• High impact strength
• Usable over a wide temperature range
• Easy to thermoform
APPLICATION AREAS:
Outdoor for automotive, signage, advertising, street
furniture, building and construction, safety and security,
point of sale/purchase, cladding and decoration,
protection etc.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 1,5 – 6 mm
Colours: black or others up on request
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Tensile elongation at at break >50 % ISO 527
Tensile elongation at yield (at break) 6 % ISO 527
Flexural strength 90 MPa ISO 178
Flexural modulus 2300 MPa ISO 178
Izod impact, notched +23 °C 60 kJ/m2 ISO 180
Elastic modulus 2300 MPa ISO 527
Tensile strength at yield (at break) 60 MPa ISO 527
Izod impact, unnotched 3 mm -30 °C d) 10 kJ/m2 ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Heat deflection temperature, HDT B (0,45 N/mm2) 132 °C ISO 75
Vicat softening temperature B120 149 °C ASTM D 2220
Fire properties
Flammability 1,6 mm HB Class UL 94
MAKROTECH™ MATT TECHNICAL SPECIFICATIONS
Arla Plast MAKROTECH™ FR is a range of opaque
coloured polycarbonate sheets. The product is virtually
unbreakable with extremely high impact resistance. The
product offers high temperature performance too.
MAKROTECH™ FR is flame retardant sheet produced
with halogen free according to DIN VDE 472 part 815,
flame retardant additives. A yellow card on the base
material is also available on the UL website.
MAKROTECH™ FR
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
MAKROTECH™ FR BENEFITS:
• Flame retardant (halogen free)
• High impact resistance and virtually unbreakable
• Wide temperature range
APPLICATION AREAS:
Flame retardant requirements (UL 94, oxygen index,
glow wire) for indoor flat, curved and formed applications
like electrical appliances, machine covers and
containers, luminaires.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 1,5 – 8 mm
Colours: 5 standard colours and customer specific
colours upon request
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Tensile elongation at Yield (at break) 6(110) % ISO 527
Izod impact, notched +23 °C 70 kJ/m2 ISO 180
Elastic modulus 2350 MPa ISO 527
Rockwell hardness M70 R-scale ISO 2039-2
Tensile strength at yield (at break) 63 MPa ISO 527
Izod impact, unnotched 3 mm +23 °C d) NB kJ/m2 ISO 180/1U
Izod impact, unnotched 3 mm -30 °C d) NB kJ/m2 ISO 180/1U
Tensile Stress, break, 50 mm/min 65 MPa ISO 527
Tensile Strain, yield, 50 mm/min 6 % ISO 527
Tensile Modulus, 1 mm/min 2300 MPa ISO 527
Flexural Stress, yield, 2 mm/min 90 MPa ISO 178
Flexural Modulus, 2 mm/min 2300 MPa ISO 178
Hardness, H358/30 95 MPa ISO 2039-1
Charpy Impact notched 3 mm +23 °C 75 kJ/m2 ISO 179
Izod impact strength unnotched at +23 °C NB ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Heat deflection temperature, HDT A (1,8 N/mm2) 127 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 138 °C ISO 75
Thermal conductivity 7.E-0,5 W/m.K DIN 52612
Vicat temperature VST/B 120 145 °C ISO 306
Vicat temperature VST/B 50 141 °C ISO 306
Ball Pressure Test, 125 °C +/- 2 °C PASSES – ISO 180/1U
CTE, 23 °C to 80 °C, flow 0,2 W/m-°C ISO 8302
Ball Pressure Test, 125 °C +/- 2 °C PASSES – ISO 180/1U
Fire properties
UL 94 V-= Flame Class Rating 1,5 mm UL 94
UL 94 5VA Rating 3 mm UL 94
Glow Wire Flammability Inex 850 °C passes at 1 mm IEC 60695-2-12
Glow Wire Flammability Inex 960 °C passes at 1,6 Mm IEC 60695-2-12
Oxygen Index (LOI) 35 mm ISO 4589
Electrical properties
Volume resistivity, dry >1.E+15 ? x cm IEC 60093
Oxygen Index (LOI) >1.E+15 ? IEC 60093
Oxygen Index (LOI) 0,001 IEC 60250
Oxygen Index (LOI) 17 kV/mm IEC 60243-1
Oxygen Index (LOI) 0,001 IEC 60250
Oxygen Index (LOI) 0,001 IEC 60250
Oxygen Index (LOI) 50/60 Hz 2,7 IEC 60250
Oxygen Index (LOI) 1 MHz 2,7 IEC 60250
MAKROTECH™ FR TECHNICAL SPECIFICATIONS
Arla Plast MAKROTECH™ FA is a range of opaque
coloured polycarbonate sheets. The product is virtually
unbreakable with extremely high impact resistance. The
product offers high temperature performance too.
MAKROTECH™ FA complies with food contact
regulations.
MAKROTECH™ FA
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
MAKROTECH™ FA BENEFITS:
• Food compliant sheet
• High impact strength
• Wide temperature range
APPLICATION AREAS:
The product is used in applications where food
compliance is required coupled with high temperature
performance.
Some applications include covers, containers, cladding,
agricultural equipment including flat curved and
formed parts.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 1,5 – 8 mm
Colours: contact sales representative
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Izod Impact, unnotched 4 mm -30 °C 10 kJ/m2 ISO 180/1U
Tensile elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 MPa ISO 527
Flexural modulus 2300 MPa ISO 178
Izod notched impact strength +23 °C 60
Izod notched impact strength -30 °C 10
Rockwell hardness M70 R-scale ISO 2039-2
Tensile strength at yield (at break) 63(70) MPa ISO 527
Izod impact strength unnotched at +23 °C NB ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Coefficient of linear thermal expansion (23-80 °C) 0,7 10-4 x K-1 ISO 2039-2
Vicat softening temperature B120 145 °C ASTM D 2220
Heat deflection temperature 127 °C DIN 53516
Fire properties
Flammability 1,14 mm HB Class UL 94
USA (FDA) Complies
MAKROTECH™ FA TECHNICAL SPECIFICATIONS
Arla Plast RPC is a range of opaque coloured
polycarbonate sheets. The product is virtually
unbreakable with extremely high impact resistance.
The product offers high temperature performance too.
RPC is mainly extruded in black colour for thermoforming
purposes. The sheet has a base regrind material which is
then covered with a co-extruded top layer as in our
MAKROTECH® range. Carbon black offers excellent UV
absorbance which projects the material for outdoor
applications. The product offers good cost savings versus
performance.
ALSO AVAILABLE IN:
• With stripe applied for identification in packaging
industry
• With a colored co-extrusion layer
• With UV protection on top side
RPC
OPAQUE PRODUCTS – POLYCARBONATE SHEETS
RPC BENEFITS:
• Environmental friendly with recycled core
• Good impact resistance
• Wide temperature range
APPLICATION AREAS:
Indoor applications as flat, curved and formed parts
automotive agricultural, covers and containers.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 2 – 8 mm
Colours: black
Embossing: 00/00, 00/35, 00/40
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Tensile elongation at yield (at break) 6 % ISO 527
Tensile elongation at Break >50 % ISO 527
Flexural strength >90 MPa ISO 178
Elastic modulus 2300 MPa ISO 527
Flexural modulus 2300 MPa ISO 178
Izod notched impact strength +23 °C 10
Rockwell hardness M70 R-scale ISO 2039-2
Tensile strength at yield (at break) 50 ISO 527
Izod impact strength unnotched at +23 °C NB ISO 180/1U
Physical properties
Density 1,20 g/cm3 ISO 1183
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1 ISO 2039-2
Vicat softening temperature B120 149 °C ASTM D 2220
Heat deflection temperature 132 °C DIN 53516
RPC TECHNICAL SPECIFICATIONS
MULTICLEAR® BOX 2 WALL is an aesthetically pleasing
twin wall extruded multiwall polycarbonate sheet which
offers higher light transmission products with lower
weight for handling and transportation.
MULTICLEAR® BOX 2 WALL is transparent and
translucent with one side UV protected sheet (also
available with two side UV protection, except 4-6 mm).
Standard colours are clear, opal and bronze. Available in
thicknesses of 4, 6, 8 and 10 mm.
Knife cutting operation is used both online and offline to
avoid saw dust.
MULTICLEAR® BOX 2 WALL has a 10 year limited
warranty against discolouration, loss of impact strength
and light transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC,
MULTICLEAR® ULTRA.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MULTICLEAR®
BOX 2 WALL
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® BOX 2 WALL BENEFITS:
• High light transmission
• Excellent bending radius
• One side UV protection as standard
• Light weight - simple handling and installation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising illuminated signs and advertising panels.
Agriculture greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® BOX 2 WALL TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® BOX 3 WALL is an aesthetically pleasing
triple wall extruded multiwall polycarbonate sheet which
offers higher light transmission products with lower
weight for handling and transportation.
MULTICLEAR® BOX 3 WALL is transparent and
translucent with one side UV protected sheet (also
available with two side UV protection). Standard colours
are clear, opal and bronze. Available in thickness 16 mm.
Knife cutting operation is used both online and offline to
avoid saw dust.
MULTICLEAR® BOX 3 WALL has a 10 year limited
warranty against discolouration, loss of impact strength
and light transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC,
MULTICLEAR® ULTRA.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
.
MULTICLEAR®
BOX 3 WALL
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® BOX 3 WALL BENEFITS:
• High light transmission
• Excellent bending radius
• One side UV protection as standard
• Light weight - simple handling and installation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising illuminated signs and advertising panels.
Agriculture greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® BOX 3 WALL TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® BOX 7 WALL is a seven wall extruded
multiwall polycarbonate sheet offering low U-value with
excellent light transmission The range offers high impact
strength with lower weight for handling and
transportation.
MULTICLEAR® BOX 7 WALL is transparent and
translucent with one side UV protected sheet (also
available with two side UV protection). Standard colours
are clear, opal and bronze. Available in thicknesses
16 and 20 mm.
MULTICLEAR® BOX 7 WALL has a 10 year limited
warranty against discolouration, loss of impact strength
and light transmission due to weathering.
Knife cutting operation is used both online and offline to
avoid saw dust.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC,
MULTICLEAR ULTRA
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MULTICLEAR®
BOX 7 WALL
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® BOX 7 WALL BENEFITS:
• High light transmission
• Excellent bending radius
• One side UV protection as standard
• Light weight - simple handling and installation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising illuminated signs and advertising panels.
Agriculture greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® BOX 7 WALL TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® HAMMER FINISH is a textured multiwall
polycarbonate sheet which has special aesthetic
appearance. The product has been designed to provide
an alternative�to architects or specifiers who would like
to maintain the light transmission whilst allowing
maximum diffusion of light without tinting the product.
The spread of light is even and the surface is textured on
the inner layer. Light diffusion and transmission are much
better than standard tinted products. Good cleanability
and appearance with light diffusion and diffraction hides
dirt or marks on the sheet.
MULTICLEAR® HAMMER FINISH has one side UV
protected sheet as standard (also available with two side
UV protection). Standard colours are opal, white and
bronze. Other colours are available. Thicknesses from 8
mm upwards for the whole MULTICLEAR® range.
MULTICLEAR® HAMMER FINISH has a 10 year limited
warranty against discolouration, loss of impact strength
and light transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH is available for the
whole MULTICLEAR® range.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MULTICLEAR®
HAMMER FINISH
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® HAMMER FINISH BENEFITS:
• High light transmission
• Excellent bending radius
• One side UV protection as standard
• Light weight - simple handling and installation
APPLICATION AREAS:
Where aesthetics are required and privacy is needed.
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,20 W/m.K DIN 8302
MULTICLEAR® HAMMER FINISH TECHNICAL SPECIFICATIONS
MULTICLEAR® LIGHT is an 8 wall extruded multiwall
polycarbonate sheet. The product offers increased light
transmission and light weight for an 8 layer product.
MULTICLEAR® LIGHT also offers cost saving by using
less electricity for lighting, excellent thermal insulation
and lower weight per/kg. The product offers outstanding
aesthetic quality replacing glass and other plastics in
continuous glazing applications.
MULTICLEAR® LIGHT is transparent or translucent with
one side UV protected sheet. Standard colours are clear,
opal and bronze. Available in thicknesses 25, 32, and 40
mm.
MULTICLEAR® LIGHT has a 10 year limited warranty
against discolouration, loss of impact strength and loss of
light transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MULTICLEAR® LIGHT
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® LIGHT BENEFITS:
• Good light transmission
• Excellent thermal insulation
• More than 10 times the impact strength of PMMA
• More than 4 times the impact strength of PVC
• Light weight – simple handling and installation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising – illuminated signs and advertising panels.
Agriculture – greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2015-02-03
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® LIGHT TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® LIGHT
16 & 20 mm
MULTICLEAR® LIGHT is an 8 wall extruded multiwall
polycarbonate sheet with wide channel. The product
offers increased light transmission with very light weight
for an 8 layer product allowing cost saving by using less
electricity for lighting, excellent thermal insulation and
lower weight per kg. Outstanding aesthetic quality
replacing glass and other plastics in continuous glazing
applications.
MULTICLEAR® LIGHT is transparent or translucent with
one side UV protected sheet. Standard colours are clear,
opal and bronze. Available in thicknesses 25, 32, 35 and
40 mm.
MULTICLEAR® LIGHT has a 10 year limited warranty
against discolouration, loss of impact strength and light
transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® (hammer finish), MULTICLEAR® SOLAR
CONTROL (heat reducing), MULTICLEAR® RPC.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® LIGHT BENEFITS:
• Good light transmission
• Excellent thermal insulation
• More than 10 times the impact strength of PMMA
• More than 4 times the impact strength of PVC
• Light weight – simple handling and installation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising – illuminated signs and advertising panels.
Agriculture – greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2014-08-20
20 mm
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® LIGHT 16 & 20 MM TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® LIGHT – LIGHT TRANSMISSION
%
Thickness mm Clear Opal
16 63 45
20 58 45 MULTICLEAR® LIGHT 8 WALL LIGHT 16 mm LIGHT 20 mm
Width of the sheet mm 600 625 980 1250 600 625 980 1250
Load N/m2 Length of the sheets mm
500 >6000 >6000 >6000 2700 >6000 >6000 >6000 3200
750 >6000 >6000 2800 2000 >6000 >6000 3600 2300
900 >6000 >6000 2300 1800 >6000 >6000 2775 2050
1200 >6000 >6000 1950 1650 >6000 >6000 2150 1775
1500 4600 3800 1700 1425 >6000 >6000 1950 1575
2000 2500 2300 1500 1300 3200 2800 1600 1250
Minimum Bending Radius LIGHT 16 mm: 2800 min. LIGHT 16 mm: 3500 min.
MULTICLEAR® RPC is a polycarbonate sheet
extruded primarily from regrind polycarbonate. With
MULTICLEAR® RPC you will get a product with high
impact strength and high temperature resistance.
MULTICLEAR® RPC is suitable for outdoor applications.
The RPC sheet can bet protected against UV on the top
side. To widen the use the RPC sheet can be offered in
black multiwall structure with one co-extruded side. The
product can also be produced with BOX 2W, BOX 3W
and STRONG structures. Multiclear RPC can be
coloured and available in varying thicknesses.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected).
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
.
MULTICLEAR® RPC MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® RPC BENEFITS:
• Lower costs than standard polycarbonate materials
• More than 10 times the impact strength of PMMA
• More than 4 times the impact strength of PVC
• One side UV as standard
APPLICATION AREAS:
Internal partitions, soundproofing, hospital room privacy
partitions, farmhouse partitions and roofing, furniture
parts. Ideal for cladding, transport boxes and packaging.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® RPC TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® SOLAR CONTROL GREY is an extruded
multiwall polycarbonate sheet which stops heat build up.
It provides pleasant ambiance by allowing greater light
transmission compared to standard tinted products whilst
keeping the infra-red heat out. The spread of light is even
and the surface is textured on the inner layer. The grey
and silver combination of colour provides an aesthetically
pleasing product once glazed whilst needing lesser
frequency for cleaning due to its colour or effect.
MULTICLEAR® SOLAR CONTROL GREY has one side
UV protected sheet as standard (also available with two
side UV protection).
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1. In case of fire, the sheet will
melt and allow venting where heat and smoke will be let
out and therefore reduce the growth of fire by flame
spread.
MULTICLEAR® SOLAR CONTROL GREY has a 10 year
limited warranty against discolouration, loss of impact
strength and light transmission due to weathering.
MULTICLEAR® SOLAR CONTROL GREY
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® SOLAR CONTROL BENEFITS:
• Keeping the infra-red heat out
• High light transmission
• One side UV protection as standard
• Good cleanability and appearance
APPLICATION AREAS:
Suitable for applications where solar heat reduction is
needed.
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Agriculture – greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2015-02-03
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® SOLAR CONTROL GREY COMPARISON
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
PRODUCT MULTICLEAR® STRONG
10 mm 10 mm 10 mm 16 mm 16 mm 16 mm
Clear Opal SC Grey Clear Opal SC Grey
Shading coefficient SC 0,74 0,70 0,42 0,76 0,63 0,31
Total solar energy transmittance g (%) 65% 61% 37% 65% 55% 27%
Light transmittance Ty (%) 64% 44% 25% 60% 30% 15%
Direct solar transmittance Te (%) 59% 55% 24% 59% 47% 14%
Direct solar reflectance Re (%) 23% 26% 30% 19% 23% 27%
MULTICLEAR® SOLAR CONTROL TRANSPARENT is
an extruded multiwall polycarbonate sheet which stops
heat build up. Transparent provides pleasant ambiance
by allowing greater light transmission compared to
standard tinted products whilst keeping the infra-red heat
out. The spread of light is even and the surface is
textured on the inner layer. Good cleanability and
appearance
MULTICLEAR® SOLAR CONTROL TRANSPARENT has
one side UV protected sheet as standard.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1. In case of fire, the sheet will
melt and allow venting where heat and smoke will be let
out and therefore reduce the growth of fire by flame
spread.
MULTICLEAR® SOLAR CONTROL TRANSPARENT has
a 10 year limited warranty against discolouration, loss of
impact strength and light transmission due to weathering.
MULTICLEAR® SOLAR CONTROL TRANSPARENT
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® SOLAR CONTROL BENEFITS:
• Keeping the infra-red heat out
• High light transmission
• One side UV protection as standard
• Good cleanability and appearance
APPLICATION AREAS:
Suitable for applications where solar heat reduction is
needed.
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Agriculture – greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2015-02-03
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® SOLAR CONTROL TRANSPARENT COMPARISON
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
PRODUCT MULTICLEAR® STRONG
10 mm 10 mm 10 mm 16 mm 16 mm 16 mm
Clear Opal SC Grey Clear Opal SC Grey
Shading coefficient SC 0,74 0,70 0,42 0,76 0,63 0,31
Total solar energy transmittance g (%) 65% 61% 37% 65% 55% 27%
Light transmittance Ty (%) 64% 44% 25% 60% 30% 15%
Direct solar transmittance Te (%) 59% 55% 24% 59% 47% 14%
Direct solar reflectance Re (%) 23% 26% 30% 19% 23% 27%
MULTICLEAR® STRONG is an range of extruded
multiwall polycarbonate sheet specifically designed to
offer increased stiffness allowing cost saving by using
less glazing bars for installations hence increased light
transmittance.
MULTICLEAR® STRONG is transparent and translucent
with one side UV protected sheet (also available with two
side UV protection). Standard colours are clear, opal and
bronze. Available in thicknesses 10, 16, 20 and 25 mm.
Lower weight products are available for 16 and 25 mm.
Knife cutting operation is used both online and offline to
avoid saw dust.
MULTICLEAR® STRONG has a 10 year limited warranty
against discolouration, loss of impact strength and light
transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
.
MULTICLEAR®
STRONG
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® STRONG BENEFITS:
• High light transmission
• Excellent bending radius
• Cross structure offering greater stiffness
• Good thermal insulation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising illuminated signs and advertising panels.
Agriculture greenhouses, lorry/tractor ports and
farm/barn buildings.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® STRONG TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
MULTICLEAR® STRONG ULTRA 25/5 is an extruded
5 wall polycarbonate sheet designed to offer better
stiffness than standard weight products (the impact
strength is at quarter of the weight of glass of equivalent
thickness). The sheet offers increased impact resistance
by using cross structure and more material. The ribs are
optimised to improve the stiffness. The system is cost
saving by using less glazing bars for installations hence
increased light transmittance.
MULTICLEAR® STRONG ULTRA is transparent and
translucent with one side UV protected sheet (also
available with two side UV protection). Standard colour
is opal. Available in thickness 25 mm.
MULTICLEAR® STRONG ULTRA has a 10 year limited
warranty against discolouration, loss of impact strength
and light transmission due to weathering.
ALSO AVAILABLE:
MULTICLEAR® HAMMER FINISH, MULTICLEAR®
SOLAR CONTROL (UV protected), MULTICLEAR® RPC.
EXCELLENT FIRE PERFORMANCE complying
requirements to EN 13501-1 (EUROPEAN BUILDING
STD). In case of fire, the sheet will melt and allow venting
where heat and smoke will be let out and therefore
reduce the growth of fire by flame spread.
.
MULTICLEAR®
STRONG ULTRA 25/5
MULTIWALL PRODUCTS – PC SHEETS
MULTICLEAR® STRONG ULTRA 25/5
BENEFITS:
• Less structural glazing bars hence increased
light transmission
• Cross structure offering greater stiffness
• High wind and snow loading capacity
• Excellent thermal insulation
APPLICATION AREAS:
Building industry – roofing, cladding, sidewalls,
conservatories, domes, skylights, sheds, car ports,
smoke vents, swimming pool covers, suspended
ceilings, glasshouses, shopping centre roofing,
railway/metro station, stadia roofing and partitions.
Lighting/packaging lamp optics and neon signs boxes,
pallet shields, protective covers for fragile items.
Advertising illuminated signs and advertising panels.
Agriculture greenhouses, lorry/tractor ports and farm/
barn buildings.
Version 2014-08-20
Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
MULTICLEAR® STRONG ULTRA 25/5 TECHNICAL SPECIFICATIONS
Property Value Unit Standard
Physical properties
Density 1,2 g/cm3 ISO 1183
Refractive index (20 °C) 1,586 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %
Mechanical properties
Tensile strength at yield (at break) 63 (70) N/mm2 ISO 527
Elongation at yield (at break) 6 (110) % ISO 527
Elastic modulus 2300 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D
Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D
Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A
Rockwell hardness M70 ISO 2039-2
Thermal properties
Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1
Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75
Vicat temperature VST/B 120 149 °C ISO 306
Vicat temperature VST/B 50 148 °C ISO 306
Specific heat capacity, Cp 1,17 kJ/kg.K
Thermal conductivity 0,21 W/m.K DIN 52612
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. ATECH 3000 is a super high impact ABS with a
semigloss surface that thermoforms quickly and effectively.
ALSO AVAILABLE IN:
• ATECH 3003 has extra UV stabilizers added to improve
weather resistance
• ATECH 3000 FA is a food compliant product version
• Stripes for identification purpose
• Dual colouring to optimize to your need
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 3000
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3000 BENEFITS:
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
In general where a high impact strength material is
needed like machine covers, high demanding general
purpose & indoor applications.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1750 mm
Thickness range: 2 – 9 mm
Colours: 14 standard colours and customer specific
colours upon request
Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,
00/45, 00/50, 00/57 00/60
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,05 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield >2 % ISO 527
Tensile elongation at break 55 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength 55 MPa ISO 178
Flexural modulus 2000 MPa ISO 178
Izod impact, notched +23 °C 30 kJ/m2 ISO 180
Izod impact, unnotched -18 °C 20 kJ/m2 ISO 180
Izod impact, unnotched -35 °C 10 kJ/m2 ISO 180
Ball intendation hardness 77 MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2
Vicat softening temperature B120 97 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3000 TECHNICAL SPECIFICATIONS
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. The ATECH 3100 is a super high impact matt
ABS which remains matt after thermoforming.
ALSO AVAILABLE IN:
• ATECH 3103 has extra UV stabilizers added to improve
weather resistance
• ATECH 3110 with the matt surface on both sides
• Dual colouring to optimize to your needs
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 3100
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3100 BENEFITS:
• Supermatt surface finish after thermoforming
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
Suitable for demanding automotive parts which are
exposed to secondary UV light, and other tough
industrial applications where a supermatt finish is
required.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1750 mm
Thickness range: 1,5 – 8 mm
Colours: 14 standard colours and customer specific
colours upon request
Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,
00/45, 00/50, 00/57 00/60
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,05 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield >2 % ISO 527
Tensile elongation at break 55 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength 55 MPa ISO 178
Flexural modulus 2000 MPa ISO 178
Izod impact, notched +23 °C 30 kJ/m2 ISO 180
Izod impact, unnotched -18 °C 20 kJ/m2 ISO 180
Izod impact, unnotched -35 °C 10 kJ/m2 ISO 180
Ball intendation hardness 77 MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2
Vicat softening temperature B120 97 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3100 TECHNICAL SPECIFICATIONS
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. The ATECH 3200 is a super high impact ABS
with a top layer of high gloss PMMA (acrylic).
ALSO AVAILABLE IN:
• ATECH 3203 with extra UV stabilization added in ABS to
improve weather resistance (3-5y)
• ATECH 3206 with extra UV stabilization added in ABS
and PMMA (10y)
• Optional with different structures to combine the high
gloss surface
• Dual colouring to optimize to your need
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 3200
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3200 BENEFITS:
• Super high gloss surface finish
• Different stages of weathering performance solutions
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
Suitable for demanding external automotive component
parts which are exposed to UV light, and other tough
industrial applications where a high gloss finish is
required.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1750 mm
Thickness range: 2 – 8 mm
Colours: Standard colours and customer specific colours
upon request
Embossing: 00/00, 00/35, 00/38, 00/40, 00/50, 00/60
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,07 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield >2 % ISO 527
Tensile elongation at break 55 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength 55 MPa ISO 178
Flexural modulus 2000 MPa ISO 178
Izod impact, notched +23 °C 30 kJ/m2 ISO 180
Izod impact, unnotched -18 °C 20 kJ/m2 ISO 180
Izod impact, unnotched -35 °C 10 kJ/m2 ISO 180
Ball intendation hardness 77 MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2
Vicat softening temperature B120 97 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3200 TECHNICAL SPECIFICATIONS
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. The ATECH 3300 is a super high impact ABS
with a semigloss top layer of ASA material.
ALSO AVAILABLE IN:
• ATECH 3300M with a matt ASA surface
• ATECH 3330 with ASA surface on both sides
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 3300
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3300 BENEFITS:
• Weathering performance
• Chemical resistance
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
The weathering properties makes ATECH 3300 the
ultimate choice for any outdoor application such as
gardening applications, agriculture vehicles, transport
vehicles etc.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1650 mm
Thickness range: 2 – 8 mm
Colours: Standard colours and customer specific
colours upon request
Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,
00/45, 00/50, 00/57 00/60
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,05 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield >2 % ISO 527
Tensile elongation at break 53 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength 55 MPa ISO 178
Flexural modulus 2000 MPa ISO 178
Izod impact, notched +23 °C 30 kJ/m2 ISO 180
Izod impact, unnotched -18 °C 20 kJ/m2 ISO 180
Izod impact, unnotched -35 °C 10 kJ/m2 ISO 180
Ball intendation hardness 77 MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2
Vicat softening temperature B120 97 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3000 TECHNICAL SPECIFICATIONS
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. The ATECH 3400 is a super high impact ABS
with a matt colored PMMA top layer.
ALSO AVAILABLE IN:
• ATECH 3400GC Gloss control range with a gloss level to
meet your requirements
• ATECH 3440 with matt PMMA surface both sides
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 3400
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3400 BENEFITS:
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
The great weathering properties and gloss cha-
racteristics makes ATECH 3400 series suitable for both
indoor and outdoor applications. For example;
advertising, building & construction, industrial machines,
automotive etc.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1750 mm
Thickness range: 2 – 8 mm
Colours: Black and customer specific colours upon
request
Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,
00/45, 00/50, 00/57 00/60
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,07 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield % ISO 527
Tensile elongation at break 55 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength MPa ISO 178
Flexural modulus MPa ISO 178
Izod impact, notched +23 °C 20 kJ/m2 ISO 180
Izod impact, unnotched -18 °C kJ/m2 ISO 180
Izod impact, unnotched -35 °C 10 kJ/m2 ISO 180
Ball intendation hardness MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2
Vicat softening temperature B120 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3400 TECHNICAL SPECIFICATIONS
ATECH is a series of sheets based on ABS which is a raw
material with very high impact-strength. ABS also has
impressive thermal qualities and is easy to thermoform and
fabricate. The A3700 is a super high impact ABS with a soft
touch, super matt, UV stabilized, thermoplastic elastomer
on the top surface that is UV stabilized.
CLEANING RECOMMENDATIONS
• ATECH Use dry clean air to blow off dust
• Use a mild soap solution or a slightly acidic or alkaline �
detergent
• Methanol and ethanol can be used in moderate �
concentrations and short term use
• Always rinse with clean lukewarm water
• Use lint free synthetic cloths or sponges similar
to chamois
ATECH® 3700
OPAQUE PRODUCTS – ABS SHEETS
ATECH® 3700 BENEFITS:
• Softtouch feeling with high friction
• Good weathering performance
• Supermatt after thermoforming
• Easy to thermoform
• High impact strength�
• Good thermal qualities
APPLICATION AREAS:
The great weathering properties and surface
characteristics makes ATECH 3700 series suitable for
both indoor and outdoor applications. For example;
industrial machines, packaging, automotive etc.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1500 mm
Thickness range: 2 – 8 mm
Colours: Standard colours in black and grey and
customer specific colours upon request
Embossing: 00/45, other upon request
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,06 g/cm3 ISO 1183
Mechanical properties
Tensile strength at yield 33 MPa ISO 527
Tensile elongation at yield % ISO 527
Tensile elongation at break 55 % ISO 527
Elastic modulus in tension 1900 MPa ISO 527
Flexural strength MPa ISO 178
Flexural modulus MPa ISO 178
Izod impact, notched +23 °C 25 kJ/m2 ISO 180
Izod impact, unnotched -18 °C kJ/m2 ISO 180
Izod impact, unnotched -35 °C 15 kJ/m2 ISO 180
Ball intendation hardness MPa ISO 2039
Thermal properties
Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2
Vicat softening temperature B120 °C ISO 306
Heat deflection temperature HDT-A 86 °C ISO 75
Mould shrinkage 0,6 – 0,7 % ISO 294-4
ARTECH® 3700 TECHNICAL SPECIFICATIONS
ATECH® 5100 is PC/ABS sheet coextruded with Matt ABS
layer. The product offers good impact strength and wide
working temperature range. ATECH® 5100 has good
chemical resistance to most common chemicals and offers
better fire performance than ABS.
ALSO AVAILABLE IN:
• ATECH 5103 with extra UV stabilizers added to improve
weather resistance
• ATECH 5110 with the matt surface on both sides
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
ATECH® 5100
OPAQUE PRODUCTS – PC/ABS SHEETS
ATECH® 5100 BENEFITS:
• Matt surface finish after thermoforming
• Easy to thermoform
• High impact strength
• Good thermal qualities
APPLICATION AREAS:
Suitable for demanding automotive parts which are
exposed to secondary UV light, and other tough
industrial applications where a supermatt finish is
required.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1450 mm
Thickness range: 3 – 6 mm
Colours: black and customer specific colours
upon request
Embossing: 00/00, 00/40, 00/50
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Tensile strength at Break 55 MPa ISO 527
Tensile elongation at Break 50 % ISO 527
Flexural Strength 73 MPa ISO 178
Izod Impact, unnotched 4 mm +23 °C NB kJ/m2 ISO 180/1U
Izod Impact, unnotched 4 mm -30 °C NB kJ/m2 ISO 180/1U
Izod Impact, notched 3 mm +23 °C 40 kJ/m2 ISO 180/1A
Izod Impact, notched 3 mm -23 °C 32 kJ/m2 ISO 180/1A
Ball indentation hardness (H-35.8/30) 87 MPa ISO 2039/1
Elastic modulus 2000 MPa ISO 527
Flexural modulus 2100 MPa ISO 178
Physical properties
Density 1,16 g/cm3 ISO 1183
Thermal properties
Vicat B/120 125 °C ISO 306
HDT A 1,80 MPa 110 °C ISO 75
Fire properties
Flammability 1,6 mm Class HB UL 94
Flammability 3,0 mm < 5 mm/min US-FMVSS 302
ARTECH® 5100 TECHNICAL SPECIFICATIONS
TPE (TPO) – The O8000-13 is a thermoplastic elastomer
(TPE) which is polyolefin (PP) based, hence also named
thermoplastic polyolefin (TPO). It combines the high impact
strength of elastomers with the stability and processability
of a thermoplastic material. The sheets are easy to thermo-
form and to fabricate. The material can be recycled like all
thermoplastic materials.
ALSO AVAILABLE IN:
• O8003-13, with a UV stability package that makes it
suitable for outdoor use applications.
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
O8000-13 TPE (TPO)
OPAQUE PRODUCTS – TPE (TPO) SHEETS
O8000-13 TPE (TPO) BENEFITS:
• Very high impact strength at low temperatures
• Good chemical and abrasion resistance
• Good noise damping properties
• Easy thermoforming
• Good weathering performance with UV
stabilized version
APPLICATION AREAS:
Thermoformed parts for very tough outdoor automotive
applications.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1250 mm others upon request
Thickness range: 2 – 8 mm
Colours: Black and grey, others upon request
Embossing: 00/00, 00/35, 00/40, 00/55
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Izod impact, notched +23°C 65 KJ/m2 ISO 180
Flexural modulus 800 MPa ISO 178
Elongation at break 300 % ISO 527
Tensile Stress at yield 19 MPa ISO 527
Izod Impact, notched -23°C 60 KJ/m2 ISO 180/1A
Charpy Impact, notched +23°C 60 KJ/m2 ISO 179-1eA
Charpy Impact, notched -20°C 8 KJ/m2 ISO 179-1eA
Physical properties
Density 0,90 g/cm3 ISO 1183
Thermal properties
Vicat softening temperature 135 °C ISO 306
O8000-13 TPE (TPO) TECHNICAL SPECIFICATIONS
TPE (TPO) – The O8010 is a mineral modified
thermoplastic elastomer (TPE) which is polyolefin (PP)
based, hence also named thermoplastic polyolefin (TPO). It
combines the high impact strength of elastomers with the
stability and processability of a thermoplastic material. The
sheets are easy to thermoform and to fabricate. The
material can be recycled like all thermoplastic materials.
ALSO AVAILABLE IN:
• O8013, with a UV stability package that makes it
suitable for outdoor use applications.
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
O8010 TPE/TPO
OPAQUE PRODUCTS – TPE (TPO) SHEETS
O8010 TPE /TPO BENEFITS:
• Mineral modified for improved properties
• Very high impact strength at low temperatures
• Good chemical and abrasion resistance
• Good noise damping properties
• Easy to thermoform
• Good weathering performance with UV
stabilized version
APPLICATION AREAS:
Thermoformed parts for very tough outdoor automotive
applications.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1250 mm others upon request
Thickness range: 2 – 8 mm
Colours: Black and grey, others upon request
Embossing: 00/00, 00/35, 00/40, 00/55
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Izod impact, notched +23°C 65 KJ/m2 ISO 180
Elongation at yield (at break) 300 % ISO 527
Flexural modulus 1200 % ISO 178
Charpy unnotched impact strength +23 °C No break MPa ISO 179
Tensile strength at yield (at break) 21 KJ/m2 ISO 527
Izod impact strength -20 °C, notched 34 KJ/m2 ISO 180
Charpy Impact, notched 3 mm +23 °C 64 KJ/m2 ISO 179
Charpy Impact Strength -20 °C 8 ISO 179
Physical properties
Density 0,97 g/cm3 ISO 1183
Thermal properties
Vicat softening temperature 138 °C ISO 306
O8010 TPE/TPO TECHNICAL SPECIFICATIONS
TPE (TPO) – The O8030-13 is a thermoplastic elastomer
(TPE) which is polyolefin (PP) based, hence also named
thermoplastic polyolefin (TPO). It combines the high impact
strength of elastomers with the stability and processability
of a thermoplastic material. The sheets are easy to thermo-
form and to fabricate. The material can be recycled like all
thermoplastic materials.
ALSO AVAILABLE IN:
• O8033, with a UV stability package that makes it
suitable for outdoor use applications.
RECYCLING
Our total recycling concept (TRC), is a major advantage in
todays environmentally friendly market. The TRC concept
covers all types of sheets to provide you with cost saving.
Off-cuts from the sheets can be used in production of new
sheets by co-extruding virgin material as the top layer.
Care is taken that all quality requirements are met.
O8030 TPE/TPO
OPAQUE PRODUCTS – TPE (TPO) SHEETS
O8030 TPE/TPO BENEFITS:
• Mineral modified for improved properties
• High stiffness
• High Impact strength
• Good temperature resistance
• Good moisture barrier resistance
• Good chemical resistance
• Low and stable mould shrinkage
APPLICATION AREAS:
Thermoformed parts for very tough outdoor automotive
applications.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 1250 mm others upon request
Thickness range: 2 – 8 mm
Colours: Black, others upon request
Embossing: 00/00, 00/35, 00/40, 00/55
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Flexural modulus 2000 MPa ISO 178
Tensile strength at yield (at break) 19 MPa ISO 527
Charpy Impact strength -20 °C, notched 6,5 KJ/m2 ISO 179
Charpy Impact Strength 0 °C, notched 15,5 KJ/m2 ISO 179
Charpy Impact Strength +23 °C, notched 52 kJ/m2 ISO 179
Elongation at break 85 % ISO 527
Physical properties
Density 1,13 g/cm3 ISO 1183
Thermal properties
Vicat softening temperature 10 N 131 °C ISO 306
O8030 TPE/TPO TECHNICAL SPECIFICATIONS
GRIPHEN® FROST is high impact transparent sheet with
frosty look on each side. The product is easy to fabricate
and thermoform without pre-drying offering faster cycle
times hence cost saving. The product offers high definition
on thermoforming. The product can be used
in point of sale and point of purchase applications.
GRIPHEN® FROST retains frosty look after thermoforming.
GRIPHEN® FROST also offers excellent colour range.
ALSO AVAILABLE:
GRIPHEN® UV, (UV protected), GRIPHEN® COLOUR
(transparent and opal colours), GRIPHEN® COLOUR UV
(transparent colours with UV protection)
GRIPHEN® FROST
TRANSPARENT PRODUCTS – PETG SHEETS
GRIPHEN® FROST BENEFITS:
• Unique frosty look
• Easy to thermoform or fabricate
• Cost effective - no pre-drying required when
thermoforming
• More than 2 times the impact strength of high
impact PMMA
APPLICATION AREAS:
Solutions in interior design, displays, indoor illuminated
signs, showcases applications and exclusive design
accessories.
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm, 2050 x 3050 mm
Thickness range: 2 – 8 mm
Colour: Clear and FROST colours
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,27 g/cm3 ISO 1183
Refractive index (20 °C) 1,57 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,2 % ISO 62
Mechanical properties
Tensile strength at break 55 MPa ISO 527
Elongation at yield (at break) 40 % ISO 527
Elastic modulus 2200 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/1eU
Izod notched impact strength +23 °C 11,5 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 4,4 kJ/m2 ISO 180/A
Rockwell hardness R115 R-scale ISO 2039-2
Tensile strength at yield (at break) N/mm2 ISO 527
Thermal properties
Linear coefficient of thermal expansion (23-70 °C) 51x10-4 K1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 68 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 72 °C ISO 75
Thermal conductivity 0,19 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry 1016 Ω x cm IEC 60093
Surface resistivity, dry 1015 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 1 MHz 2,4 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,02 IEC 60250
GRIPHEN® FROST TECHNICAL SPECIFICATIONS
GRIPHEN® is high impact transparent sheet. The product
is easy to fabricate and thermoform without pre-drying
offering faster cycle times hence cost saving. The product
offers high definition on thermoforming and clarity on cold
and hot bending. The product can be used in point of sale
and point of purchase applications,
GRIPHEN® FDA can be used for applications where food
contact is required. GRIPHEN® also offers excellent colour
range, UV protected product and also the unique frosty
(satin) look
ALSO AVAILABLE:
GRIPHEN® UV, (UV protected), GRIPHEN® COLOUR
(transparent and opal colours), GRIPHEN® COLOUR UV
(transparent colours with UV protection) GRIPHEN®
FROST (anti reflex frost surface)
GRIPHEN®
TRANSPARENT PRODUCTS – PETG SHEETS
GRIPHEN® BENEFITS:
• Very easy to thermoform and no pre drying
needed
• Food contact approval
• Outstanding high clarity and surface quality
• GRIPHEN® has more than 2 times the impact
strength of high impact PMMA
• Good chemical resistance
APPLICATION AREAS:
Indoor and outdoor signs, shelving and racking systems,
food displays/bin/dividers, thermoformed covers, vending
machine faces, medical equipment (packaging etc),
industrial equipment (machine coverings, machine
protections and many different kinds of technical parts).
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm, 2050 x 3050 mm
Thickness range: 1,5 – 10 mm
Colour: Clear and Transparent colours
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such
information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Physical properties
Density 1,27 g/cm3 ISO 1183
Refractive index (20 °C) 1,57 ISO 489
Moisture absorption 24 hours, 23 °C, 50% RH 0,2 % ISO 62
Mechanical properties
Tensile strength at break 55 MPa ISO 527
Elongation at yield (at break) 40 % ISO 527
Elastic modulus 2200 N/mm2 ISO 527
Flexural modulus 2300 N/mm2 ISO 178
Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/1eU
Izod notched impact strength +23 °C 11,5 kJ/m2 ISO 180/1A
Izod notched impact strength -30 °C 4,4 kJ/m2 ISO 180/A
Rockwell hardness R115 R-scale ISO 2039-2
Tensile strength at yield (at break) N/mm2 ISO 527
Thermal properties
Linear coefficient of thermal expansion (23-70 °C) 51x10-4 K1 ISO 11359-2
Heat deflection temperature, HDT A (1,80 N/mm2) 68 °C ISO 75
Heat deflection temperature, HDT B (0,45 N/mm2) 72 °C ISO 75
Thermal conductivity 0,19 W/m.K DIN 8302
Electrical properties
Volume resistivity, dry 1016 Ω x cm IEC 60093
Surface resistivity, dry 1015 Ω IEC 60093
Dielectric strength, dry 30 kV/mm IEC 60243
Dielectric constant, dry 1 MHz 2,4 IEC 60250
Dissipation factor (tan δ), dry 1 MHz 0,02 IEC 60250
GRIPHEN® TECHNICAL SPECIFICATIONS
GRIPHTECH® is an opaque coloured copolyester sheet
which combines extremely good fabrication and thermo-
forming properties with good impact strength. The product
has good fire performance, self-extinguishable and also low
smoke generation (during a fire).
ALSO AVAILABLE IN:
• UV protected optional
• Frost surface optional
• Recycled in black optional
• Food compliant version
GRIPHTECH®
OPAQUE PRODUCTS – PETG SHEETS
GRIPHTECH® BENEFITS:
• No predrying needed before thermoforming
• Easy to achieve high definitions with sophisticated
shapes at thermoforming
• Fast cycle times in thermoforming
• Good fire properties
• Good chemical resistance
APPLICATION AREAS:
Indoor and outdoor, shelving and racking systems, food
displays/bin/dividers, thermoformed covers, vending
machine faces, medical equipment (packaging etc),
industrial equipment (machine coverings, machine
protections and many different kinds of technical parts).
DELIVERY PROGRAM:
Standard size: 1250 x 2050 mm
Max width: 2050 mm
Thickness range: 1,5 – 8 mm
Colours: Standard colours, customer specific colours
upon request
Embossing: 00/00
Version 2014-08-20
Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden
Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com
Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.
Property Value Unit Standard
Mechanical properties
Elongation at yield (at break) 4,7 (40) % ISO 527
Elastic modulus 2200 % ISO 527
Tensile strength at yield (at break) 53 (26) MPa ISO 527
Izod impact, unnotched 3 mm +23 °C d) NB* kJ/m2 ISO 180/1U
Izod Impact, unnotched 3 mm -30 °C d) NB* kJ/m2 ISO 180/1U
Physical properties
Density 1,27 g/cm3 ISO 1183
Thermal properties
HDT A 1,80 Mpa 68 °C ISO 75
Vicat B 5 kg 78 °C ISO 306
Coefficient of linear thermal expansion 6,8x10-5 mm/mK ASTM D696
Electrical properties
Volume resistivity, dry 1016 ? x cm IEC 60093
Surface resistivity, dry 1015 ? IEC 60093
Dielectric constant, dry 1 MHz 2,4 IEC 60250
Fire and smoke performance
Flammability 4 mm Class V2C) ** UL 94
Flammability 3 mm (UL listed raw material) Class V2C) ** UL 94
* = Internal test�** = Indicative testing only (UI file available for resin used)
GRIPHTECH® TECHNICAL SPECIFICATIONS
Arla Plast AB • Västanåvägen • SE-590 30 Borensberg • Sweden • Phone + 46 141 20 38 00 • Fax + 46 141 414 30 • E-post: [email protected]
Arla Plast s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadan • Czech Republic • Phone + 420 474 698 030 • Fax + 420 474 698 040 • E-mail: [email protected]
)