Plant Closed SURPLUS EQUIPMENT OF WEATHERFORDs3.serverdata.com/ · (2) 100 HP Ingersoll Rand Model...
Transcript of Plant Closed SURPLUS EQUIPMENT OF WEATHERFORDs3.serverdata.com/ · (2) 100 HP Ingersoll Rand Model...
HYDRAULIC CYLINDER MANUFACTURER INCLUDING CENTERLESS GRINDERS,CNC TURNING CENTERS, CNC MACHINING CENTERS, ENGINE LATHES, ID AND OD
GRINDERS, TOOLROOM MACHINERY, AIR COMPRESSORS AND SUPPORT EQUIPMENT
HYDRAULIC CYLINDER MANUFACTURER INCLUDING CENTERLESS GRINDERS,CNC TURNING CENTERS, CNC MACHINING CENTERS, ENGINE LATHES, ID AND OD
GRINDERS, TOOLROOM MACHINERY, AIR COMPRESSORS AND SUPPORT EQUIPMENTSee Instructions on Page 3
To Become a Qualified Bidder on the Internet
SALE DATE: TUESDAY, AUGUST 29TH, STARTING AT 9:00 AMSALE DATE: TUESDAY, AUGUST 29TH, STARTING AT 9:00 AMINSPECTION: MONDAY, AUGUST 28TH, FROM 10:00 AM TO 4:00 PM
SURPLUS EQUIPMENT OF WEATHERFORDSURPLUS EQUIPMENT OF WEATHERFORD600 Airpark Rd. – Woodward, Oklahoma 73801
120 Miles Northwest of Oklahoma City
Plant Closed
Cincinnati Model 350-20 CNC Centerless Grinder 42" Mattison No. 24 Rotary Surface Grinder
Mazak Model M5NX-1500 Flat Bed CNC Lathe
Mori Seiki Model SL-35 CNC Turning Center
(2) 100 HP Ingersoll Rand Model SSR-EP100 RotaryScrew CE Air Compressors
NEW2010
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction With
Prestige Equipment Auctions35 Pinelawn Road, Melville, NY 11747Phone 613-249-5566 Fax [email protected]
1749381i CIA Weatherford-4 7/28/17 7:24 AM Page 1
TUESDAY, AUGUST 29TH – 9:00 AMTUESDAY, AUGUST 29TH – 9:00 AM
(4) Mori Model SL25B5 CNC Turning Centers Mori Model MV-65/50 CNC VMC
Mazak Model Quickturn 20 HP CNC TurningCenter
26”/36” x 78” South Bend Model Nordic Gap BedEngine Lathe
Mazak Ultra 650 Two-Pallet CNC HorizontalMachining Center
(5) LNS Hydrobar Bar Feeds to 4.5”
Mazak Model Multiplex 425 Twin-Spindle CNCTurning Center
Large Quantity Tooling and Machine Accessories
CNC TURNING CENTERSMazak Model M5NX-1500 Flat BedCNC Lathe; s/n 112893, 24” x 72”Capacity, Mazatrol T-Plus, 8-Pos. Front and6-Pos. Rear Turrets, Chip Conveyor, 12”Chucks (1995) SEE PHOTO
Mazak Model Quickturn 20 HPCNC Turning Center; s/n 118890, 10”Chuck, Tailstock, Foot Pedal, Mazatrol T-Plus (1996) SEE PHOTO
Mori Seiki Model SL-35 CNCTurning Center; s/n 1222, MF-T6Controls, 12” Chuck, 24” Swing Over Bed,72” Centers, 12 Pos. Turret, Tailstock,Coolant (Approx. 1993) SEE PHOTO
Mori Seiki Model SL-35B CNCTurning Center; s/n 760, Mori T5FControl, 12” Chuck, 12 Pos. Turret,Tailstock (1990)
Mazak Model Multiplex 425 Twin-Spindle CNC Turning Center; s/n105136, Maztrol T32-2, 10” Chuck, ToolProbe, 12 Pos. Turret (1992) SEE PHOTO
Mazak Model 35NATC Multi-AxisCNC Turning / Milling Center; s/n93673, Mazatrol T32-3 Control, 12”Chuck, 16-Pos. ATC, CHIP CONVEYOR,42” Centers, 20” Swing (1990)
• (10) 2” Shank Live Toolholdersand (10) Straight TypeToolholders
(4) Mori Model SL25B5 CNCTurning Centers; s/n 3668, 5102, 4328,& 4393, MF-T4 Controls, Collet and 8”Chucks, 10 Pos. Turrets, Tailstock, CHIPCONVEYOR (1990) SEE PHOTO
(2) Takisawa Model TC-4 CNCTurning Centers; s/n THxW-1291 &THxW-0216, Fanuc OT Control, (1) with12” and (1) with Collet Chuck, Tailstock,12 Pos. Turrets, 52” Centers, CHIP CON-VEYOR
(2) Takisawa Model TS-25 CNCTurning Centers; s/n TKMS-0054 &TKMS-0049, Fanuc OT Control, 10”Chuck, Tailstock, Tool Probe
Takisawa Model TC4 TurningCenter; s/n 1288, 15” Chuck, OTControl, 52” Centers (1988)
BAR FEEDS4.48” Cap. LNS Hydrobar Model7.114-5.2 Hydraulic Bar Feed
(3) LNS Hydrobar Model 6.65HS-5.2 Hydraulic Bar Feeds
LNS Hydrobar Model 6.90HS-5.4Hydraulic Bar Feed
CNC HORIZONTALMACHINING CENTERMazak Ultra 650 Two-Pallet CNCHorizontal Machining Center; s/n116909, Mazatrol M-Plus, 25” x 25”Pallets, 40 Pos. ATC, 50 Taper, ChipConveyor, Coolant, Renishaw Probe (1995)
SEE PHOTO
CNC VERTICALMACHINING CENTERSMori Model MV-65/50 CNC VMC;s/n 811, Mori Control, 25” x 76” Table, 30Pos. ATC, No. 50 Taper, Coolant
SEE PHOTO
Mori Model MV-55/50 CNC VMC w/4th Axis; s/n 1846, MF-M4 control, 22” x50” Table, 40 Positon ATC, Coolants
Mazak Model VTC-16B CNC VMC;s/n 126263, Mazatrol M Plus Control, 16”x 58” Table, 20 Pos. ATC (1997)
TOOLING(250) Approx. No. 50 Holders
(10) Machine Vises to 8”
(5) 4th Axis Tables by Haas,Tsudakoma and Others
16” x 30” Devlieg Angle Plate Set
Other Tooling Including SuperSpacer Chucks to 12”, IndexableLathe, Boring Bars and Drills,Carbide Inserts, Perishable Tooling,Machine Accessories
CENTERLESSGRINDERSCincinnati Model 350-20 CNCCenterless Grinder; s/n 9166-350-91-0110, GCH Rebuilt Wheel Spindle; s/n07320, 20” Wide Wheel, FanucPowermate CNC Control, 10’ Bar FeedRack, 50 HP Motor, Coolant (1991)
SEE PHOTO
Cincinnati Model Centurmatic 325-12 Centerless Grinder, s/n350412H5W-8, 12” Wheel, 4’ Infeed andOutfeed Bar, Racks, Dressers, Coolant(1970) SEE PHOTO
ID AND ODGRINDERS12” x 36” Toyota Model GUP-32x100 OD Grinder; s/n LG483-1,Drop Down ID, 1” Wide Wheel, MotorizedWorkhead, Tooling (1979) SEE PHOTO
12” x 36” Cincinnati OD Grinder;s/n 2U305A, ID Spindle
(2) Bryant Model 1116J IDGrinders; s/n N-15373, 7.5 HPHydraulic, PB Control, Coolant
Bryant Model 1416J ID Grinder; s/nR-15583, 12” Chuck, 7.5 HP, PB Control,Coolant
Cabinet with ID Grinding Stone,Mandrels and Chuck Jaws
ROTARY SURFACEGRINDER42” Mattison No. 24 Rotary SurfaceGrinder; s/n 24770, 43” Chuck, Approx.1/2” Chuck Lift, 22” Diameter GrindingWheel, 75 HP Motor, Marposs Gauging,PB Control, Coolant with Mac Filter,Hydraulic System SEE PHOTO
HONE144” Stroke (Approx.) HorizontalHone; 10” Chuck, 3-1/4” Hole Thru,Rolling Carriage with Hydraulic Stroke, 15HP Hydraulic Unit, Coolant with Filtration
SEE PHOTO
SAWS13” x 18” Hyd-Mech S20AHorizontal Band Saw, 16” Stroke BarFeed, PB Control SEE PHOTO
12” Dake Model 3155 Mitre ColdSaw (2007)
12” Kalmazoo Model K14S5Abrasive Saw (2008)
26” Doall Vertical Band Saw, BladeWelder
PRESSES20 Ton Hannifin Model S201-41-SPHydraulic Straightening Press; s/nD69664, 60” Wide Bed, Bed Clamps andWork Holders SEE PHOTO
60 Ton American Type M-2-6 C-Frame Hydraulic Press; s/n 4928
ENGINE LATHES26”/36” x 78” South Bend ModelNordic Gap Bed Engine Lathe; s/nN315D-64ET-0480, Taper, 15” Chuck,Speeds to 1,400 RPM SEE PHOTO
LATE ADDITION OF (4) FORK LIFTS – SEE WEBSITE FOR DETAILS
1749381i CIA Weatherford-4 7/28/17 7:25 AM Page 2
SURPLUS EQUIPMENT OF WEATHERFORDSURPLUS EQUIPMENT OF WEATHERFORD
(20) Dumping Hoppers From 1/4 Yard to 1-1/2 YardCapacity
(45) 15’ H X 2’ Arm Jarke Cantilever Racks
Minuteman Litterboss Diesel Power Rider Sweeper(80) 22” x 52” Tubular Frame Pipe and Bar Carts
Cincinnati Model Centurmatic 325-12 CenterlessGrinder
144” Stroke (Approx.) Horizontal Hone 12” x 36” Toyota Model GUP-32x100 OD Grinder
2,000 Deg. LuciferModel DL7-R24 ElectricFurnace
13” x 18” Hyd-Mech S20A Horizontal Band Saw
(10) 1/2 Ton to 2 TonFree-Standing JibCranes
20 Ton Hannifin ModelS201-41-SP HydraulicStraightening Press
6,600 Lb. Kalmar ModelEFY/30/08/55S ElectricSide Loader
(2) 100 HP Ingersoll Rand Model SSR-EP100 RotaryScrew CE Air Compressors
WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the
Sale Date, if you do not you will not be approved.
➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned SpendingBudget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.
16” x 150” Monarch Engine Lathe;s/n 39742, Taper, 12” Chuck, Steady Rest
Lathe Tooling and AccessoriesIncluding Dumore 57-02 ToolpostGrinder, Aloris Toolpost with (10) Holders,Chucks, Centers, Lathe Tools and Related
TOOLROOMMACHINERY3 HP Hurco Mill with 12” x 48” Table,Power Draw Bar
2 HP Bridgeport Series I Mill, 42”Power Table
(2) Sunnen Model MBB-1800Hones; s/n 80155
KO Lee Model B360 T&C Grinder
Adrian Oliver Model 600 DrillGrinder
OK No. 202 Universal T&CGrinder, Power Workhead
48” Whitney Bench Center
(2) Rockwell Hardness Testers
MISCELLANEOUSMACHINERYFeedall Model 1700HD Auto BarLoader; s/n 15959, 100” (Approx.)Capacity
32” x 120” Cardinal HD Weld BuildUp Lathe Fixture
2,000 Deg. Lucifer Model DL7-018Electric Furnace; s/n 7548, 18” x 18” x18” Capacity
2,000 Deg. Lucifer Model DL7-R24Electric Furnace; s/n 7549, 24” x 24” x24” Capacity SEE PHOTO
500 Deg. Grieve Model AA-500Electric Oven; s/n 330008, 24” x 24” x24”
30” x 60” Kelco and 32” x 60” BlastCabinets with Reclaim
Lincoln Square Wave Tig 255Welder with Leads and Cooler
LNS Bar Champfer Machine with10” Chuck
Six-Tank Manual Dip Wash Line w/32” x 42” x 60” Long Tanks
(20) 20” x 32” x 16” Deep StainlessBaskets
(12) DE and Tool Grinders
(3) Coolant Systems with Filters,Approx. 40” x 96” x 32” Deep Tanks
Cecor Type CP5-100/100 PortableCoolant Pump
FORKLIFTSSee Website for Late Edition ForkLifts
6,600 Lb. Kalmar ModelEFY/30/08/55S Electric Side Loader;s/n 9-121-69, 216” Lift, 11’ Wide Carriage(1987) SEE PHOTO
5,000 Lb. Raymond Model E55TNElectric Side Loader; s/n 902-4D-E5STN-2240S, 181” Lift, 11’ Carriage
Minuteman Litterboss Diesel PowerRider Sweeper; s/n n/a, 51.04 HoursShowing SEE PHOTO
Radius 300 Walk Behind ElectricSweeper
JIB CRANES(10) Free Standing 360 DegreeRotating Jib Cranes for 8’ to 12’Arm and 1/4 Ton to 1 Ton
AIR COMPRESSORS(2) 100 HP Ingersoll Rand ModelSSR-EP100 Rotary Screw CE AirCompressors; s/n CK9394U10337(17,923 and 5,981 Hours) andCK965PU11222 (17,923 and 5,981), 434CFM, 125 PSIG, 460 Volt (New 2010)
SEE PHOTO
Ingersoll Rand Model D850INA400Air Dryer; s/n 552101
5 HP Speedaire Vertical Tank AirCompressor
SHOP EQUIPMENT15’ High x 2’ Arm Jarke Steel TreeDouble Side Cantilever Racks, (30)Uprights, (8) Shelves, (2” Spacer Brackets
15’ High x 2’ Arm Jarke Steel TreeSingle Side Cantilever Racks, with(14) Uprights with (9) Shelves Approx.,92” Spacer Brackets
(20) Dumping Hoppers From 1/4Yard to 1-1/2 Yard Capacity
SEE PHOTO
(80) 22” x 52” Tubular Frame Pipeand Bar Carts SEE PHOTO
(10) 20” x 36” (Approx.) HydraulicScissor Carts
Shop Equipment Including PlasticSpill Skids, Barrel Holders, (80) SectionsClip Type Steel Shelving, Carts, Racks,Ladders, Hoppers, Cabinets, (3) 4-Shelf 3’x 3’ Slide Out HD Racks, Pallet Rack,Ladders, Chains, Slings, Carts, Fork Jiband Drum Dumper, Mop Buckets andRelated
NEW2010
1749381i CIA Weatherford-4 7/28/17 7:25 AM Page 3
FIRST CLASS MAIL!
Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞
All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.
15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM
TERMS OF SALE
Use GPS for best resultsDIRECTIONS
TUESDAY, AUGUST 29THTUESDAY, AUGUST 29TH
SURPLUS EQUIPMENTOF WEATHERFORD
Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.
MAIL BIDS ACCEPTED WITH A 25% DEPOSIT
IMPORTANT NOTICE:
PRE-SORTFIRST CLASS
U.S. POSTAGEPAID
CINCINNATI, OHIOPERMIT NO. 3593
Plant Closed
SURPLUS EQUIPMENTOF WEATHERFORD
600 Airpark Rd.Woodward, Oklahoma 73801
120 Miles Northwest of Oklahoma City
(6) Mori Sieki CNC Lathes(6) Mori Sieki CNC Lathes(6) Mori Sieki CNC Lathes (2) Air Compressors (2011)(2) Air Compressors (2011)(2) Air Compressors (2011)
(13) CNC Lathes(13) CNC Lathes(13) CNC Lathes (2) Centerless Grinders(2) Centerless Grinders(2) Centerless Grinders
SURPLUS EQUIPMENTOF WEATHERFORD
Plant Closed
SURPLUS EQUIPMENTOF WEATHERFORD
600 Airpark Rd. – Woodward, Oklahoma 73801120 Miles Northwest of Oklahoma City
SALE DATE:Tuesday, August 29th
STARTING: 9:00AMINSPECTION:
Monday, August 28th10:00 AM to 4:00 PM
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com
Cincinnati Industrial Auctioneers, Inc.Jeffrey L. Luggen Joseph M. Luggen
AUCTIONEERS
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction With
Prestige Equipment Auctions35 Pinelawn Road, Melville, NY 11747Phone 613-249-5566 Fax [email protected]
1749381i CIA Weatherford-4 7/28/17 7:25 AM Page 4