Planmeca ProX. New intraoral X-ray device Optimal images for all diagnostic needs: variable kV and...
-
Upload
micah-shadbolt -
Category
Documents
-
view
218 -
download
0
Transcript of Planmeca ProX. New intraoral X-ray device Optimal images for all diagnostic needs: variable kV and...
Planmeca ProX
Planmeca ProX
• New intraoral X-ray device • Optimal images for all diagnostic
needs: variable kV and mA• Easy and fast to use: pre-programmed
quick settings, practical design• Digital ready with Planmeca
ProSensor. Peferct wokflow with Planmeca Romexis
• Versatile installation options
Optimal images for all diagnostic needs
• Small focal spot 0.4mm • small unsharpness
• Optional long cone• small unsharpness
• Geometric requirements for good images are met
Optimal images for all diagnostic needs
Optimal images for all diagnostic needs
Reduced radiationAdvantages of the constant potential (DC) X-ray generator•Reduced radiation dose by up to 25% when compared to conventional AC generators•Extremely good and uniform image contrast•Absolute reproducibility of images•Improved reliability and prolonged life span of the X-ray tube•The X-ray unit output is not affected by line voltage fluctuations.
Easy and fast to use
• Non-symmetric shape• Tube head and cone have a common
smooth plane – easy targeting along the smooth
surface– close to the patient’s chest in
occlusal images
Easy and fast to useSmooth movementsDrift-free positioningRobust designNo vibrations
easy, quick and accurate positioning
Easy and fast to use
66 pre-programmed quick settings• modality selection to choose film, imaging
plate or sensor• density setting • adult/child selection• periapicals for different teeth• occlusal• bite-wing / endo
• Quick setting allow ALWAYS to have right exposure values for individual cases
Easy and fast to use
•hand held control panel•remote exposure station
Digital ready with Planmeca ProSensor
• Integrated magnetic connector for digital Planmeca ProSensor intraoral sensors
• The Planmeca ProSensor interconnection cable is routed inside the X-ray unit arm, which results in a clear and clean working area with no interfering cables.
• The imaging parameters (kV, mA, exposure time) are transferred to the imaging software to be recorded with the patient's images.
Mounting alternatives
•Standard wall mount
•Floor column mount
•Single stud mount, coming 2012
•Pass-through mount, coming 2012
•Dental unit mount, coming 2012
•Ceiling mount (also with operating light), coming 2012
The End
More information:Erkki HiltunenProduct Manager, X-raystel: +358 20 7795 456 [email protected]
Mark NiemiProduct Manager, X-raystel: +358 20 7795 743 [email protected]
12/2011